Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIMING PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

MPMC and MCMD: Free High-Performance Simulation Software for Atomistic Systems

Advancements in parallel computing and hardware have allowed computational exploration of chemical systems of interest with unprecendented accuracy and efficiency. The typical development of molecular simulation software is initially inspired by a particular scientific inquiry. The softwares presented herein, MPMC (Massively Parallel Monte Carlo) and MCMD (Monte Carlo/Molecular Dynamics) were born out of a pursuit to simulate condensed phase physical and chemical interactions in porous materials. MPMC first began in 2005 and has been used for dozens of published results in the literature but has not yet been introduced in a standalone paper. MCMD is a more recent expansion and re-write with some published work, focused on adding molecular dynamics algorithms for transport and other time-dependent properties of chemical systems. Each software functions as a standalone with some unique and other overlapping features. Here, a driving aim of this work is to consider periodic, long-range polarization effects in classical simulation, and both codes are optimized to perform such calculations. Sample results will be presented which highlight methodically that inclusion of explicit polarization produces simulation results with predictive power which in general are in greater agreement with experiment than non-polarizable analogous simulations.

97 MATHEMATICS AND COMPUTING↗

Autonomous Changes in Polymer Materials Driven by Chemical Fuels

Time-dependent properties in polymer materials can be achieved through coupling to out-of-equilibrium chemical fuel reactions that mimic biological processes. Through transient changes in bonding in polymers, transient gelation, changes in mechanical stiffness, swelling, self-healing, or self-assembly can be achieved. Recent advances in these categories are discussed. These out-of-equilibrium behaviors enable applications ranging from smart adhesives to actuators for soft robotics. However, challenges remain, including waste accumulation, bio-compatibility, and achieving functionally useful performance. Addressing these issues is essential for advancing the practical use of chemically driven polymer materials and unlocking their full potential for future technologies.

36 MATERIALS SCIENCE↗

Interacting chiral form field theories and $$ T\overline{T} $$-like flows in six and higher dimensions

Abstract In this paper we initiate the study of six-dimensional non-linear chiral two-form gauge theories as deformations of free chiral two-form gauge theories driven by stress-tensor$$ T\overline{T} $$ T T ¯ -like flows. To lay the background for this study, we elaborate on the relationship between different Lagrangian formulations of duality-invariantp-form theories and corresponding$$ T\overline{T} $$ T T ¯ -like flows in various dimensions. To this end we propose a new formulation which (i) is a generalization of the four-dimensional construction by Ivanov, Nurmagambetov and Zupnik (INZ) and (ii) turns into the PST formulation upon integrating out an auxiliary self-dual field. We elucidate space-time covariant properties of the PST formulation by clarifying and making use of its relation to the INZ-type formulation and to a so-called “clone” construction.

Physics↗

Constructing Amplitudes from Their Soft Limits

The existence of universal soft limits for gauge-theory and gravity amplitudes has been known for a long time. The properties of the soft limits have been exploited in numerous ways; in particular for relating an n-point amplitude to an (n-1)-point amplitude by removing a soft particle. Recently, a procedure called inverse soft was developed by which 'soft' particles can be systematically added to an amplitude to construct a higher-point amplitude for generic kinematics. We review this procedure and relate it to Britto-Cachazo-Feng-Witten recursion. We show that all tree-level amplitudes in gauge theory and gravity up through seven points can be constructed in this way, as well as certain classes of NMHV gauge-theory amplitudes with any number of external legs. This provides us with a systematic procedure for constructing amplitudes solely from their soft limits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Particle-in-Cell Method for Plasmas with a Generalized Momentum Formulation, Part II: Enforcing the Lorenz Gauge Condition

In a previous paper Christlieb et al. (A particle-in-cell method for plasmas with a generalized momentum formulation, part I: Model formulation, 2024), we developed a new particle-in-cell (PIC) method for the relativistic Vlasov–Maxwell system in which the electromagnetic fields and the equations of motion for the particles were cast in terms of scalar and vector potentials through a Hamiltonian formulation. This new method evolved the potentials under the Lorenz gauge using integral equation methods. New methods to construct spatial derivatives of the potentials that converge at the same rates as the fields were also presented. The new particle method was compared against standard explicit discretizations, including the well-known FDTD-PIC method, for a range of applications involving sheaths and particle beams. Here, this paper extends this new class of methods by focusing on the enforcement the Lorenz gauge condition in both exact and approximate forms using co-located meshes. A time-consistency property of the proposed field solver for the vector potential form of Maxwell’s equations is established, which is shown to preserve the equivalence between the semi-discrete Lorenz gauge condition and the analogous semi-discrete continuity equation. Using this property, we present three methods to enforce a semi-discrete gauge condition. The first method introduces an update for the continuity equation that is consistent with the discretization of the Lorenz gauge condition. Both the finite difference and spectral implementations satisfy this discrete gauge condition to machine precision. The second approach we propose enforces a semi-discrete continuity equation using the boundary integral solution to the field equations. The potential benefit of this approach is that it eliminates spatial derivatives that appear on the particle data, namely the current density, which is often calculated by linear combinations of low-order spline basis functions. This method is ideally suited to boundary integral equation methods that invert multi-dimensional operators without dimensional splitting techniques and will be the subject of future work. The third approach introduces a gauge correcting method that makes direct use of the gauge condition to modify the scalar potential and uses local maps for both the charge and current densities. This results in a gauge error, as the maps do not enforce the continuity equation. The vector potential coming from the current density is taken to be exact, and using the Lorenz gauge, we compute a correction to the scalar potential that makes the two potentials satisfy the gauge condition. This method also enforces the gauge condition to machine precision. We demonstrate two of the proposed methods in the context of periodic domains. Problems defined on bounded domains, including those with complex geometric features remain an ongoing effort. However, this work shows that it is possible to design computationally efficient methods that can effectively enforce the Lorenz gauge condition in a non-staggered PIC formulation.

97 MATHEMATICS AND COMPUTING↗

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used. To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates. Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic data-driven multiscale modeling for predicting the degradation of a 316L stainless steel nuclear cladding material

Here, we have developed a long short-term memory stacked ensemble (LSTM-SE) surrogate modeling approach that can provide rapid predictions of microstructural evolution and the resultant mechanical properties of American Iron and Steel Institute (AISI) 316L series stainless steel (316LSS) fuel cladding under conditions of varying temperature and radiation dose rate. To acquire training data, we developed and implemented a kinetic Monte Carlo (KMC) model to simulate precipitation kinetics of M 23 C 6 , γ', and G phases within SS316L cladding. Experimentally reported precipitation kinetics of SS316L in literature were linked to the kinetic parameters of the simulated precipitation in our KMC model. The model was then used to simulate microstructure evolution under synthetically generated treatments of varying temperature and radiation dose rate, for periods of up to 3000 hours. Changes in volume fraction, number density, and particle size of precipitates were recorded, and particle area fractions were correlated using statistical methods to develop the surrogate model. Simultaneously, the mechanical properties of the simulated microstructures were evaluated using microstructure-based finite element method (FEM) analysis to determine the elastic modulus, yield stress, ultimate tensile strength, and elongation to failure of the aged microstructures. Using this approach, our surrogate model can predict precipitation behavior within 0.25% volume fraction and mechanical properties within 6% relative error from the values predicted by the KMC and FEM models using 50 training simulations as input. The trained recurrent neural network-based model can return estimations of precipitation kinetics and mechanical properties ~1000 times faster than the physics-based codes. This work demonstrates, as a proof of concept, that reactor material service lifetimes under variable service conditions can be predicted for a statistics-based model from a practicably obtainable dataset.

36 MATERIALS SCIENCE↗

The intercalation of bicyclic and tricyclic carboxylates into layered double hydroxides

Twenty-four nanocomposites built from layered double hydroxides and bicyclic and tricyclic carboxylates have been synthesised for the first time. Eight carboxylates were successfully intercalated into [LiAl{sub 2}(OH){sub 6}]Cl.yH{sub 2}O, [Ca{sub 2}Al(OH){sub 6}]NO{sub 3}.yH{sub 2}O, and [Mg{sub 2}Al(OH){sub 6}]NO{sub 3}.yH{sub 2}O, and the products fully characterised. Guest species incorporated include 1-adamantane carboxylate (1-AC) and 5-norbornene-2-endo-3-exo-dicarboxylate. In some cases, carbonate anions were co-intercalated with the organic guest, and in others poorly crystalline aluminium hydroxides formed as by-products. Sharper resonances were observed in the {sup 13}C solid-state NMR spectra of the 1-AC intercalates than in the spectrum of pure 1-AC, suggesting increased order in the arrangement of the cyclic cages in the intercalates. Where possible, time-resolved in situ X-ray diffraction was employed to study the nanoscopic steps involved in the intercalation reactions. These investigations showed that the reactions are one-step processes, proceeding directly to the fully exchanged intercalate with no intermediate phases. The intercalation processes were found to be nucleation controlled. -- Graphical abstract: Twenty-four novel nanocomposites built from layered double hydroxides and bicyclic and tricyclic carboxylates have been synthesised and fully characterised. In situ X-ray diffraction was used to study reaction mechanisms and kinetics. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of quartz particle size and water-to-solid ratio on hydrothermal synthesis of tobermorite studied by in-situ time-resolved X-ray diffraction

Hydrothermal synthesis process of tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) has been investigated by in-situ X-ray diffraction using high-energy X-rays from a synchrotron radiation source in combination with a purpose-build autoclave cell. Dissolution rates of quartz were largely affected by its particle size distribution in the starting mixtures. However, the composition (Ca/Si) of non-crystalline C-S-H at the start of tobermorite formation was identical regardless of the quartz dissolution rate. An effect of water-to-solid ratio (w/s) was investigated for samples using fine particle quartz. Tobermorite did not occur with w/s of 1.7 but occurred with w/s higher than 3.0. Surprisingly, however, the dissolution curves of quartz were nearly identical for all samples with w/s from 1.7 to 9, indicating that the dissolution rate is predominated by surface area. Possible reaction mechanism for tobermorite formation will be discussed in terms of Ca and/or silicate ion concentration in the liquid phase and distribution of Ca/Si in non-crystalline C-S-H. - Graphical abstract: Time-resolved XRD data set was obtained at up to 190 deg. C under a saturated steam pressure. Tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) formation reaction was investigated in detail for several different starting materials. Highlights: > Hydrothermal formation of tobermorite was monitored by in-situ XRD. > Ca/Si of C-S-H at the start time of tobermorite formation was determined. > The Ca/Si value was identical regardless of the quartz particle size in the starting mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The transformation behavior of Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy during isothermal heat treatment

The transformation behavior of Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy during isothermal heat treatment has been studied by transmission electron microscope observation. On the basis of micro-hardness measurement, time-temperature-property curves of the alloy have been established, and nose-temperatures of curves are about 650 deg. C. Discontinuous precipitates appeared as the samples isothermal heat treated at 550 deg. C, while continuous precipitates appeared as the samples isothermal heat treated at temperatures below 550 deg. C and above 650 deg. C. {beta}-Ni{sub 3}Si, {delta}-Ni{sub 2}Si and {delta}'-Ni{sub 2}Si precipitates were observed in the specimens. The crystal orientation relationships between copper matrix and precipitates were determined as (02-bar 2-bar){sub Cu} || (01-bar 1-bar){sub {beta}} || (010){sub {delta}}, [100]{sub Cu} || [100]{sub {beta}} || [001]{sub {delta}};(02-bar 2-bar){sub Cu} || (01-bar 1-bar){sub {beta}} || (100){sub {delta}} ', [100]{sub Cu} || [100]{sub {beta}} || [001]{sub {delta}} '. - Highlights: {yields} TTP curves have been established and their nose-tip temperatures are about 650 deg. C. {yields} Discontinuous precipitation appeared during isothermal treated at 550 deg. C. {yields} Continuous precipitation appeared when temperature is below 550 deg. C and above 650 deg. C. {yields} Crystal orientations relationships are: (02-bar 2-bar){sub Cu} || (01-bar 1-bar){sub {beta}} || (010){sub {delta}}, [100]{sub Cu} || [100]{sub {beta}} || [001]{sub {delta}};(02-bar 2-bar){sub Cu} || (01-bar 1-bar){sub {beta}} || (100){sub {delta}} ', [100]{sub Cu} || [100]{sub {beta}} || [001]{sub {delta}} '.

36 MATERIALS SCIENCE↗

Probing the potential of type V Deep eutectic solvents as sustainable electrolytes

The increasing interest within the scientific community in environmentally friendly solvents has led to a focus on Deep Eutectic Solvents (DES), which have natural components. DES are viewed as alternatives to traditional organic solvents and have the potential to be used as electrolytes. For the first time, transport properties of four Type V Deep Eutectic Salt Solutions (DESS) were accessed to investigate the potential of this technology, selecting precursors ranked as excellent in Eco-Scale metrics. The DESS were composed of terpene and trioctylphosphine oxide (TOPO), and varying concentrations of lithium bis(trifluoromethane)sulfonimide (LiTFSI), and their properties were assessed through self-diffusion, viscosity, density, and conductivity measurements. While Type V DESS are capable of dissolving significant amounts of LiTFSI (up to 30 % molar), their ionic conductivity is low, with values ranging from 3.6·10 –3 to 9.3·10 –2 mS·cm –1 at 25 °C, thus limiting their suitability as electrolytes, for instance, for lithium-ions batteries applications. Similar diffusion coefficients for Li + and TFSI – ions suggest the formation of long-lived ion pairs moving as a neutral species. As a result, future research aims to introduce additives to disrupt contact ion pairs and enhance transport properties, leveraging the sustainable appeal of DES and their use in advanced energy storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the nonlinearity of transducer acoustic couplants for nonlinear elastic measurements

The study of nonlinear elasticity of materials often relies on attaching contact transducers to a sample to achieve the required strain amplitudes. When measuring and quantifying the degree of nonlinearity, it is assumed that the nonlinearity of the bond between the material and the transducer is negligible. We aim to characterize the nonlinearity of common acoustic couplants used in nonlinear measurements. Other factors are also reported since bond nonlinearity is not the only important property when choosing an acoustic couplant, i.e., amount of energy transfer, thermal properties, cure time, toxicity, and ease of application and/or removal. Various types of acoustic couplants including, epoxies, glues, thermal adhesives, and coupling agents were studied using Nonlinear Resonance Ultrasound Spectroscopy (NRUS), which is a measure of the hysteretic nonlinearity of a material. Measurements were made on cylindrical samples of acrylic, aluminum alloy 6061-T651, and Crab Orchard sandstone, chosen for their range of sound speeds, attenuation, and nonlinearity.

36 MATERIALS SCIENCE↗

Collapse for the higher-order nonlinear Schrödinger equation

We examine conditions for finite-time collapse of the solutions of the higher-order nonlinear Schr odinger (NLS) equation incorporating third-order dispersion, self-steepening, linear and nonlinear gain and loss, and Raman scattering; this is a system that appears in many physical contexts as a more realistic generalization of the integrable NLS. By using energy arguments, it is found that the collapse dynamics is chiefly controlled by the linear/nonlinear gain/loss strengths. We identify a critical value of the linear gain, separating the possible decay of solutions to the trivial zero-state, from collapse. The numerical simulations, performed for a wide class of initial data, are found to be in very good agreement with the analytical results, and reveal long-time stability properties of localized solutions. The role of the higher-order effects to the transient dynamics is also revealed in these simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of thermal treatment time on structural and physical properties of polyimide films at beginning of carbonization

Poly(4,4'-oxydiphenylene-oxydiphthalimide) (POO) was thermally treated at 773 K for 1, 15 and 60 min under argon atmosphere resulting in free-standing films with intermingled characteristics between polymer and carbon-rich derivatives. Degradative thermal analysis performed by pyrolysis-gas chromatography/mass spectroscopy (Py-GC/MS) revealed CO 2 among the major products of thermal decomposition which according to electron paramagnetic resonance (EPR) passed through a radical process. X-ray diffraction (XRD) revealed thermal treated samples with semicrystalline organization that was attributed to the development of lamellae structure. Moreover, Atomic force microscopy (AFM) showed an increase in the roughness of the samples that acquired pronounced roughcast-like surface. Hence, there was an enhancement of mechanical strength and dielectric permittivity. From the data collected a mechanism of thermal decomposition was proposed.

36 MATERIALS SCIENCE↗

Probability of Loss of Assured Safety in Systems with Multiple Time-Dependent Failure Modes: Incorporation of Delayed Link Failure in the Presence of Aleatory Uncertainty

Probability of loss of assured safety (PLOAS) is modeled for weak link (WL)/strong link (SL) systems in which one or more WLs or SLs could potentially degrade into a precursor condition to link failure that will be followed by an actual link failure after some amount of elapsed time. The descriptor loss of assured safety (LOAS) is used because failure of the WL system places the entire system in an inoperable configuration while failure of the SL system before failure of the WL system, although undesirable, does not necessarily result in an unintended operation of the entire system. Thus, safety is “assured” by failure of the WL system before failure of the SL system. Here, the following topics are considered: (i) Definition of precursor occurrence time cumulative distribution functions (CDFs) for individual WLs and SLs, (ii) Formal representation, approximation and illustration of PLOAS with (a) constant delay times, (b) aleatory uncertainty in delay times, and (c) delay times defined by functions of link properties at occurrence times for link failure precursors, and (iii) Procedures for the verification of PLOAS calculations for the three indicated definitions of delayed link failure.

58 GEOSCIENCES↗

The Association Between Cloud Droplet Number over the Summer Southern Ocean and Air Mass History

The cloud properties and governing processes in Southern Ocean marine boundary layer clouds have emerged as a central issue in understanding the Earth's climate sensitivity. While our understanding of Southern Ocean cloud feedbacks have evolved in the most recent climate model intercomparison, the background properties of simulated summertime clouds in the Southern Ocean are not consistent with measurements due to known biases in simulating cloud condensation nuclei concentrations. This paper presents several case studies collected during the Capricorn 2 and Marcus campaigns held aboard Australian research vessels in the Austral Summer of 2018. Combining the surface–observed cases with MODIS data along forward and backward air mass trajectories, we demonstrate the evolution of cloud properties with time. These cases are consistent with multi–year statistics showing that long trajectories of air masses over the Antarctic ice sheet are critical to creating high droplet number clouds in the high latitude summer Southern Ocean. We speculate that secondary aerosol production via the oxidation of biogenically derived aerosol precursor gasses over the high actinic flux region of the high latitude ice sheets is fundamental to maintaining relatively high droplet numbers in Southern Ocean clouds during Summer.

54 ENVIRONMENTAL SCIENCES↗