Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Influence of opacity on the pulsational stability of massive stars with uniform chemical composition. II - Modified Kramers opacity

The pulsational stability of massive, chemically homogeneous stars of Population I has been investigated for a range of simple opacity representations consisting of a straight sum of electron-scattering and modified Kramers opacity. The critical mass for stability against nuclear-energized pulsations is found to be extraordinarily sensitive to small changes in the coefficient and/or temperature exponent of the absorption part of the opacity law. A gradual increase in the atomic absorption (dominant near the stellar surface) first raises the critical mass, then restricts the upper mass limit for instability, and finally eliminates pulsational instability at all masses.

Sastri, V. K.↗
NASA NTRS1975

Apparatus for production, measurement and reaction studies of dissociated gases at elevated temperatures

An apparatus is described which is used for the controlled production, characterization, and study of dissociated gases in a microwave discharge at elevated temperatures. A unique feature is the ability to produce and study a microwave discharge plasma in the heated zone. This allows elevated temperature reactions to be studied in high concentrations of dissociated gases. Further, the system permits weight change measurements of specimens in the plasma, thus facilitating reaction rate determinations. Included is a description of a cavity for use on a 50-mm diameter cylindrical reactor. The effects of flow rate, pressure, temperature, power, metal sample, and sampling position on dissociation percentage of oxygen in the apparatus are described as well as a technique for sample temperature measurements in the plasma which permits determination of high temperature recombination coefficients and reaction rates.

Christian, J. D.↗
NASA NTRS1976

Conversion of laser energy to gas kinetic energy

Techniques for the gas phase absorption of laser radiation for ultimate conversion to gas kinetic energy are discussed. Particular emphasis is placed on absorption by the vibration rotation bands of diatomic molecules at high pressures. This high pressure absorption appears to offer efficient conversion of laser energy to gas translational energy. Bleaching and chemical effects are minimized and the variation of the total absorption coefficient with temperature is minimal.

Caledonia, G. E.↗
NASA NTRS1979

Radiative dominated cooling of the flare corona and transition region

Models in which radiation dominates cooling flare loops are investigated. The radiative models are found to predict a differential emission measure (Q) proportional to T to the (l+1) power, where l measures the dependence of the radiative loss coefficient on temperature, lamda (T) approximately T to the (-l) power. It is concluded that the radiative models are incapable of explaining the observed temperature dependence of Q for flare coronal and transitional plasma. The models suggest that large mass motions (velocities of the order of the sound speed) may be required.

Antiochos, S. K.↗
NASA NTRS1979

Ionospheric wave spectrum measurements

The local spectrum S(k, omega) of either potential or electron-density fluctuations can be used to determine macroscopic-plasma characteristics such as the local density and temperature, transport coefficients, and drift current. This local spectrum can be determined by measuring the cross-power spectrum. The paper examines the practicality of using the cross-power spectrum analyzer on the Space Shuttle to measure ionospheric parameters. Particular attention is given to investigating the integration time required to measure the cross-power spectral density to a desired accuracy.

Harker, K. J.↗
NASA NTRS1980

Band model calculations for CFCl3 in the 8-12 micron region

A Goody random band model with a Voigt line profile is used to calculate the band absorption of CFCl3 at various pressures at room and stratospheric (216 K) temperatures. Absorption coefficients and line spacings are computed.

Silvaggio, P. M.↗
NASA NTRS1981

Some flow phenomena associated with aligned, sequential apertures with Borda-type inlets

Choked flow rate and pressure profile data were taken and studied for a configuration consisting of four axially aligned, sequential Borda tubes of 1.9 length diameter ratio with separation distances of 0.8 and 30 tube diameters. For either case the flow rate data could be represented by a flow coefficient reduced temperature plot. At a separation distance of 30 tube diameters the pressure profiles dropped sharply at the entrance and recovered within each Borda tube; except at low temperatures, where fluid jetting through the last Borda tube occurred. At a separation distance of 0.8 tube jetting was prevalent, and application of a significant backpressure did not alter the jetting. These results agree with other data for tubes with Borda or sharp edge orifice inlets and with a water flow visualization study reported herein.

Hendericks, R. C.↗
NASA NTRS1982

Flow through aligned sequential orifice type inlets

Chocked flow rate and pressure profile data were taken and studied for configurations consisting of four axially aligned, sequential orifice inlets of 0.5 length diameter ratio with separation distances of 0.66 and 32 diameters. A flow coefficient - reduced temperature plot represents the flow rate data for the two cases. At a separation distance of 32 diameters the pressure profiles dropped sharply at the entrance and partially recovered within each orifice - the exception being at low temperatures, where fluid jetting through the last orifice occurred. At a separation distance of 0.66 diameter fluid jetting was prevalent at the lower inlet temperatures. These results are in qualitative agreement with data for four axially aligned, sequential Borda inlets and for tubes with single sharp edge orifice or Borda inlets to L/D's of 105 and with a water flow visualization study.

Hendricks, R. C.↗
NASA NTRS1982

The ionization equilibrium of astrophysically abundant elements

The paper presents new calculations of ionization equilibrium fractions of 11 abundant elements (C, N, O, Ne, Mg, Si, S, Ar, Ca, Fe, Ni) as functions of temperature. Convenient coefficients for fitting the rates of collisional ionization, radiative recombination, and dielectronic recombination are also tabulated. Many of the ionization rates are based on recent experimental measurements of cross sections for collisional ionization and autoionization following inner-shell excitation. These rates are used elsewhere in computations of nonequilibrium ionization, radiative cooling, radiative shock models, and plasma emission diagnostics.

Shull, J. M.↗
NASA NTRS1981

Study of the response of stratospheric ozone to perturbations in the solar constant and solar UV flux

A one-dimensional radiative-convective photochemical model has been used to examine the response of stratospheric and total ozone to perturbations in the solar flux. The model considers a detailed chemical reaction mechanism; vertical transport is parameterized through eddy diffusion coefficients. The temperature profile is calculated using a radiative transfer model for both time-dependent and steady-state cases. Results are discussed for the following types of perturbations: a 5% increase in the solar UV flux in the wavelength range 175-300 nm, a 5% increase in the solar constant, and an annual 6.6% variation in the solar constant associated with the variation in the earth-sun distance.

Natarajan, M.↗
NASA NTRS1986

Field experiment for measurement of the radiative characteristics of a hazy atmosphere

Theoretical two-dimensional and three-dimensional solutions to the radiative-transfer equation have been applied to the earth-atmosphere system. A field experiment was conducted to test this theory. In the experiment the upward radiance was measured above and below a haze layer during simultaneous measurements of the haze characteristics. The measurements were conducted at a narrow near-IR channel (773 + or - 22 nm) which represents the visible and near-IR spectral region. The aerosol vertical optical thickness at eight wavelengths, as well as the vertical and horizontal profiles of the scattering coefficient, the temperature, and dew point were measured at several locations. These measurements quantified the vertical and spatial structure of the atmospheric haze and the atmospheric radiation. The result was a well-defined radiative-transfer experiment. The experimental data set is used to quantify the haze effect on upward radiance, including the adjacency effect (the effect of a bright area on the upward radiance measured above a dark adjacent area), and to test radiative-transfer models for a plane-parallel atmosphere above a nonuniform surface. A comparison is given between the theoretical prediction of upward radiance above the haze and the measurement. Agreement between theory and the experiment is discussed.

Kaufman, Y. J.↗
NASA NTRS1988

Material growth and characterization for solid state devices

During the period of this research grant, the process of liquid phase electroepitaxy (LPEE) was used to grow ternary and quaternary alloy III-V semiconductor thin films. Selective area growth of InGaAs was performed on InP substrates using a patterned sputtered quartz or spin-on glass layer. The etch back and growth characteristics with respect to substrate orientation were investigated. The etch back behavior is somewhat different from wet chemical etching with respect to the sidewall profiles which are observed. LPEE was also employed to grow epitaxial layers of InGaAsP alloys on InP substrates. The behavior of Mn as an acceptor dopant was investigated with low temperature Hall coefficient and photoluminescence measurements. A metal-organic vapor phase epitaxy system was partially complete within the grant period. This atmospheric pressure system will be used to deposit III-V compound and alloy semiconductor layers in future research efforts.

Collis, Ward J.↗
NASA NTRS1990

FT-IR spectroscopic studies of polycyclic aromatic hydrocarbons

Proper assessment of the hypothesis which correlates polycyclic aromatic hydrocarbons (PAHs) with the unidentified infrared emission bands requires additional experimental laboratory data. In order to address this need, thermal infrared emission studies were performed on a subset of PAHs suggested to be of astrophysical importance. It was proposed that infrared emission from interstellar PAHs occurs following absorption of an ultraviolet photon. Since energy transfer to the ground electronic state can be rapid for a species in which intersystem crossing is negligible, the emission spectrum may be viewed as resulting from an equilibrium vibrational temperature (Leger and d'Hendecourt, 1987). This has been the basis for using infrared absorption spectra to calculate the corresponding emission spectra at various temperatures. These calculations were made using room temperature infrared absorption coefficients instead of those at the temperature of interest because of the latter's unavailability. The present studies are designed to address the differences between the calculated and experimental thermal emission spectra and to provide information which will be useful in future ultraviolet induced infrared fluorescence studies. The emission spectra have been obtained for temperatures up to 825K using an emission cell designed to mount against an external port of an FT-IR spectrometer. These spectra provide information concerning relative band intensities and peak positions which is unavailable from previous calculations.

Salisbury, D. W.↗
NASA NTRS1990

Radiative properties of cirrus clouds inferred from broadband measurements during FIRE

It is well known that clouds are significant modulators of weather and climate because of their effects on the radiation field and thus on the energy balance of the earth atmosphere system. As a result, the accurate prediction of weather and climate depends to a significant degree on the accuracy with which cloud radiation interactions can be described. The broadband radiative and microphysical properties of five cirrus cloud systems are reported, as observed from the NCAR Sabreliner during the FIRE first Cirrus IFO, in order to better understand cirrus cloud-radiation interactions. A broadband infrared (BBIR) radiative transfer model is used to deduce BBIR absorption coefficients in order to assess the impact of the cirrus clouds on infrared radiation. The relationships of these absorption coefficients to temperature and microphysical characteristics are explored.

Smith, William L., Jr.↗
NASA NTRS1991

FTIR Spectroscopic Characterization Of II-VI Semiconductors

Combination of commercial Fourier-transform infrared (FTIR) spectrometer with computer and special-purpose software constitutes highly automated facility for acquisition and processing of infrared transmission or reflection spectral image data. Intended principally to acquire transmission spectra of some compounds of elements in groups II and VI of periodic table. System used to characterize specimens of II/VI alloy semiconductors grown by directional solidification and quenching. Transmission-edge maps helpful in studies of flows, gradients of temperature, and coefficients of diffusion in solidifying melts. Data acquired by system include optical characteristics, and they both verify and complement data obtained by such other techniques as measurements of density and x-ray-dispersion analysis.

Perry, G. L. E.↗
NASA NTRS1993

Three dimensional modeling of cirrus during the 1991 FIRE IFO 2: Detailed process study

A three-dimensional model of cirrus cloud formation and evolution, including microphysical, dynamical, and radiative processes, was used to simulate cirrus observed in the FIRE Phase 2 Cirrus field program (13 Nov. - 7 Dec. 1991). Sulfate aerosols, solution drops, ice crystals, and water vapor are all treated as interactive elements in the model. Ice crystal size distributions are fully resolved based on calculations of homogeneous freezing of solution drops, growth by water vapor deposition, evaporation, aggregation, and vertical transport. Visible and infrared radiative fluxes, and radiative heating rates are calculated using the two-stream algorithm described by Toon et al. Wind velocities, diffusion coefficients, and temperatures were taken from the MAPS analyses and the MM4 mesoscale model simulations. Within the model, moisture is transported and converted to liquid or vapor by the microphysical processes. The simulated cloud bulk and microphysical properties are shown in detail for the Nov. 26 and Dec. 5 case studies. Comparisons with lidar, radar, and in situ data are used to determine how well the simulations reproduced the observed cirrus. The roles played by various processes in the model are described in detail. The potential modes of nucleation are evaluated, and the importance of small-scale variations in temperature and humidity are discussed. The importance of competing ice crystal growth mechanisms (water vapor deposition and aggregation) are evaluated based on model simulations. Finally, the importance of ice crystal shape for crystal growth and vertical transport of ice are discussed.

Jensen, Eric J.↗