Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stardust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Impact of Thermonuclear Reaction Rate Uncertainties on the Identification of Presolar Grains from Classical Novae

Approximately 30%–40% of classical novae generate dust between 20 and 100 days following the eruption. However, there has yet to be a definitive identification of presolar stardust grains originating from classical novae. While multiple studies have suggested a nova origin for specific grains, aligning simultaneously all measured isotopic ratios of a specific grain with those predicted from simulations remains challenging. Using Monte Carlo simulations, this work investigates how uncertainties in thermonuclear reaction rates influence the isotopic ratios predicted in simulations of classical novae, specifically impacting the identification of presolar grains. In particular, we address two questions: (i) What is the impact of uncertainties in reaction rates on the range of isotopic ratios predicted by classical nova simulations? (ii) Which reaction rate uncertainties most significantly influence the predicted abundance ratios in presolar grains? Our results show that current reaction rate uncertainties affect the isotopic ratios of 12 C/ 13 C, 14 N/ 15 N, 16 O/ 17 O, 16 O/ 18 O, 24 Mg/ 25 Mg, 24 Mg/ 26 Mg, 26 Al/ 27 Al, and 28 Si/ 29 Si by less than 20% in either carbon–oxygen or oxygen–neon (ONe) novae, especially when considering the mixing of matter throughout the entire envelope. However, the isotopic ratios of 28 Si/ 30 Si, 32 S/ 33 S, and 32 S/ 34 S in ONe novae are exceptions: their variability greatly exceeds a factor of 2 due to the uncertainties in the reaction rates of 30 P(p,γ) 31 S, 33 S(p,γ) 34 Cl, and 34 S(p,γ) 35 Cl, respectively. These results highlight the significant influence of specific reaction rates on the predicted abundance ratios and underscore the necessity for accurate nuclear measurements to reduce these uncertainties.

Classical novae↗

Discovery of s-process Nd in Allende residue

New interpretation is given to the isotopic anomalies detected by Lugmair et al. (1983) in an acid-resistant residue of the Allende meteorite. If the Nd-142 excess is due to Sm-146 decay, as the discoverers proposed, it is argued that the decay has occurred in interstellar grains, so that the conclusion that Sm-146 (1.03 x 10 to the 8th yr) was alive in the solar system is premature. It is shown by renormalizing their data that the discovery is likely to be s-process Nd, confirming the survival of red-giant stardust in carbonaceous interstellar dust.

Clayton, D. D.↗

Astrophysical dust grains in stars, the interstellar medium, and the solar system

Studies of astrophysical dust grains in circumstellar shells, the interstellar medium, and the solar system may provide information about stellar evolution and about physical conditions in the primitive solar nebula. The following subject areas are covered: (1) the cycling of dust in stellar evolution and the formation of planetary systems; (2) astrophysical dust grains in circumstellar environments; (3) circumstellar grain formation and mass loss; (4) interstellar dust grains; (5) comet dust and the zodiacal cloud; (6) the survival of dust grains during stellar evolution; and (7) establishing connections between stardust and dust in the solar system.

Gehrz, Robert D.↗

Condensation of cosmic analog material in microgravity conditions - Preliminary analysis of a first set of flights

The first results of the STARDUST project, aimed at producing and analyzing cosmic-dust analog materials in microgravity conditions, are summarized. The discussion covers the purpose of the investigation, cosmic-dust formation and properties, previous simulations of cosmic-dust formation, the current approach, the microgravity experimental apparatus, and potential advantages of studying dust formation under microgravity conditions.

Mancini, D.↗

Classical novae - Contributions to the interstellar medium

Theoretical results predicting yields of various isotopes in nova outbursts are reviewed. Emphasis is placed on the stardust and gas-phase chemical anomalies that may be contributed to the Galactic ISM by classic novae. It is concluded that most of the heavy isotope anomalies are produced by about 25 percent of novae that occur in systems containing massive O-Ne-Mg white dwarfs. The dust-production scenario for novae is summarized, and it is argued that explosions on O-Ne-Mg white dwarfs may lead to the formation of dust grains that carry the Ne-E and Mg-26 anomalies. Quantitative constraints are placed on the degree to which classical novae participate in the production of chemical anomalies, both in the primitive solar system and on a Galactic scale.

Gehrz, Robert D.↗

Interstellar grains in primitive meteorites - Diamond, silicon carbide, and graphite

Primitive meteorites contain a few parts per million (ppm) of pristine interstellar grains that provide information on nuclear and chemical processes in stars. Their interstellar origin is proven by highly anomalous isotopic ratios, varying more than 1000-fold for elements such as C and N. Most grains isolated thus far are stable only under highly reducing conditions (C/O greater than 1), and apparently are 'stardust' formed in stellar atmospheres. Microdiamonds, of median size about 10 A, are most abundant (about 400-1800 ppm) but least understood. They contain anomalous noble gases including Xe-HL, which shows the signature of the r- and p-processes. Silicon carbide, of grain size 0.2-10 microns and abundance about 6 ppm, shows the signature of the s-process and apparently comes mainly from red giant carbon (AGB) stars of 1-3 solar masses. Some grains appear to be not less than 10 exp 9 a older than the solar system. Graphite spherules of grain size 0.8-7 microns and abundance less than 2 ppm contain highly anomalous C and noble gases, as well as large amounts of fossil Mg-26 from the decay of extinct Al-26. They seem to come from at least three sources, probably AGB stars, novae, and Wolf-Rayet stars.

Anders, Edward↗

Kupier prize lecture: Sources of solar-system carbon

We have tried to deconvolve Solar-System carbon into its sources, on the basis of C-12/C-13 ratios (equivalent to R). Interstellar SiC in meteorites, representing greater than 4.6-Ga-old stardust from carbon stars, is isotopically heavier (bar R = 38 +/- 2) than Solar-System carbon (89), implying that the latter contains an additional, light component. A likely source are massive stars, mainly Type II supernovae and Wolf-Rayet stars, which, being O-rich, eject their C largely as CO rather than carbonaceous dust. The fraction of such light C in the Solar System depends on R(sub light) in the source. For R(sub light) = 180-1025 (as in 'Group 4' meteoritic graphite spherules, which apparently came from massive stars greater than 4.6 Ga ago), the fraction of light C is 0.79-0.61. Similar results are obtained for present-day data on red giants and interstellar gas. Although both have become enriched in C-13 due to galactic evolution (to bar-R = 20 and 57), the fraction of the light component in interstellar gas again is near 0.7. (Here bar R represents the mean of a mixture calculated via atom fractions; it is not identical to the arithmetic mean R). Interstellar graphite, unlike SiC, shows a large peak at R approximately equal 90, near the solar value. Although some of the grains may be of local origin, others show anomalies in other elements and hence are exotic. Microdiamonds, with R = 93, also are exotic on the basis of their Xe and N. Apparently R approximately 90 was a fairly common composition 4.6 Ga ago, of stars as well as the ISM.

Anders, Edward↗

Interstellar Dust: Physical Processes

Dust is formed in stellar environments, and destroyed by sputtering, shattering and vaporization in shock waves due to cloud-cloud collisions and supernova blast waves. Dust is also destroyed during star formation. We review the dust formation and destruction balance. The calculated destruction time-scale is less than or equal to one billion years and the star dust injection time-scale is approx. 2.5 billion years. Hence, the fractions of elemental carbon and silicon locked up in stardust are less than 0.3 and less than 0.15, respectively. An efficient ISM dust formation route is therefore implied. In particular, in dense clouds dust grows; through the processes of coagulation and the accretion of gas phase molecules e.g. H20, CO, CH4. These icy materials may then be photoprocessed to refractory materials in more diffuse regions. The resulting carbonaceous grain mantle may actually be the glue that holds the coagulated grains together.

Jones, A. P.↗

Capture of Hypervelocity Particles with Low-Density Aerogel

Recent impact experiments conducted at Johnson Space Center supported a space-exposed flight instrument called the orbital debris collector (ODC) to see whether SiO2 acrogel performed adequately as a collector to capture cosmic dust particles and/or manmade debris, or whether additional development is needed. The first ODC was flown aboard the Mir for 18 months, while the second will be flown aboard a spacecraft (Stardust, to be launched in 1999) that will encounter the comet Wild 2 and return to Earth. Aerogels are highly porous materials that decelerate high-velocity particles without substantial melting or modifications to the particles' components; in other denser materials, these particles would melt or vaporize upon impact. The experimental data in this report must be considered somewhat qualitative because they are characterized by substantial, if not intolerable, scatter, possibly due to experimental difficulties in duplicating given sets of initial impact conditions. Therefore, this report is a chronological guide of the experimenters' attempts, difficulties, progress, and evaluations for future tests.

Hoerz, Friedrich↗

Lightweight Aluminum Mirrors Using Foam Core Sandwich Construction

The possible use of all aluminum mirrors made from thin faceplates supported by aluminum foam is explored from an optomechanical design and fabrication perspective. Foam mirrors can be relatively cheaply and easily made using conventional foam fabrication and diamond turning; such a mirror recently flew for the first time on the Stardust mission. The proposed structural concept is highly weight efficient and should not be prone to quilting. The weight and structural stability of such mirrors is presented, along with plans underway at GSFC for developing this concept.

Content, D.↗

Maneuver Design and Calibration for the Genesis Spacecraft

Genesis is the fifth mission selected as part of NASA's Discovery Program. The objective of Genesis is to collect solar wind samples for a period of approximately two years while in a halo orbit about the Earth-Sun L I point. At the end of this period, the samples are to be returned to a specific recovery point on the Earth for subsequent analysis. This goal has never been attempted before and presents a formidable challenge in terms of mission design and operations, particularly planning and execution of propulsive maneuvers. To achieve a level of cost-effectiveness consistent with a Discovery-class mission, the Genesis spacecraft design was adapted to the maximum extent possible from designs used on earlier missions, such as Mars Global Surveyor (MGS) and Stardust, another sample collection mission. The spacecraft design for Genesis is shown. Spin stabilization was chosen for attitude control, in lieu of three-axis stabilization, with neither reaction wheels nor accelerometers included. This precludes closed-loop control of propulsive maneuvers and implies that any attitude changes, including spin changes and precessions, will behave like translational propulsive maneuvers and affect the spacecraft trajectory. Moreover, to minimize contamination risk to the samples collected, all thrusters were placed on the side opposite the sample collection canister. The orientation and characteristics of thrusters are indicated. For large maneuvers (>2.5 m/s), two 5 lbf thrusters will be used for delta v, with precession to the burn attitude, followed by spin-up from 1.6 to 10 rpm before the burn and spin down to 1.6 rpm afterwards, then precession back to the original spin attitude. For small maneuvers (<2.5 m/s), no spin change is needed and four 0.2 lbf thrusters are used for Av. Single or double 360 deg. precession changes are required whenever the desired delta v falls inside the two-way turn circle (about 0.4 m/s) based on the mass properties, spin rate and lever arm lengths based on thruster locations. In such instances, delta v resulting from spacecraft precession cannot be used effectively as a component of the desired delta v, and must therefore be removed by precessing at least one complete revolution around the turn circle. To eliminate cross-track execution errors, a second revolution in the opposite direction would also be performed. This paper will address the design of propulsive maneuvers in light of the aforementioned challenges and other constraints. Maneuver design will be performed jointly by the Navigation Team at JPL and the Spacecraft Team at LMA, based on the process indicated . Typical maneuver timelines will be presented which address considerations introduced by attitude changes. These include nutation, which is introduced by precessing or spinning down and must be given sufficient time to damp out prior to execution of subsequent events, as well as sun and earth pointing constraints, which must be considered to ensure sufficient spacecraft power and to minimize telecommunications interruptions, respectively. The paper will include a description of how individual propulsive maneuvers are resolved into components to account for delta v from translational burns and spacecraft attitude changes required to carry out such maneuvers. Contributions to maneuver delta v arising from attitude changes, based on mass properties for the period just after launch, are indicated. Similar curves will be presented spanning all mission phases from launch through return. A set of closed-form equations for resolving maneuver components, base on a specific delta v required for correction or deterministic changes to the spacecraft trajectory will be presented, as well. In addition to nominal maneuvers, special calibration maneuvers are planned to improve open-loop modeling of maneuvers and to reduce execution errors. Uncalibrated execution errors are indicated. Such errors could be reduced by 50% or more over the course of the mission. Special calibrations are of particular importance for the return leg of the mission, since the sample canister must be returned to a specific location within the Utah Test and Training Range (UTTR) for mid-air retrieval. An entry angle tolerance of no less than +/- 0.08 deg. is required to achieve this objective. Biasing of the final return maneuvers coupled with a specific maneuver mode to use a series of well-characterized spin changes to effect these maneuvers is part of the current Genesis baseline mission plan. Another important objective of calibrations is to better characterize precession maneuvers. Such maneuvers are part of most propulsive maneuvers, but are also required periodically to maintain sun-pointing for power or daily during solar-wind pointing during collection periods. Although relatively small, such maneuvers will have a significant cumulative impact on orbit determination, particularly in the halo portion of the mission. The current mission design also calls for three stationkeeping maneuvers during each halo orbit of approximately six months duration. These stationkeeping maneuvers may be sufficiently small that single or double 360 deg. precession changes may be required. Because there are no accelerometers on board the spacecraft, calibration can only be performed with the aid of ground-based radiometric tracking. To establish a high degree of accuracy in characterizing the magnitude of burns, the spacecraft spin axis should be along the line of sight to the Earth, providing Doppler measurements with <1 mm/sec accuracy in S-Band. Emission constraints allow such alignment only during certain portions of the mission when the Earth-spacecraft-sun geometry is favorable. The impact of precessions, or burns at times when geometry is not favorable, can be assessed by reconstruction of the spacecraft trajectory using tracking arcs of several days before and after the event.

Williams, Kenneth E.↗

Sample Returns Missions in the Coming Decade

In the coming decade, several missions will attempt to return samples to Earth from varying parts of the solar system. These samples will provide invaluable insight into the conditions present during the early formation of the solar system, and possibly give clues to how life began on Earth. A description of five sample return missions is presented (Stardust, Genesis, Muses-C. Mars Sample Return, and Comet Nucleus Sample Return). An overview of each sample return mission is given, concentrating particularly on the technical challenges posed during the Earth entry, descent, and landing phase of the missions. Each mission faces unique challenges in the design of an Earth entry capsule. The design of the entry capsule must address the aerodynamic, heating, deceleration, landing, and recovery requirements for the safe return of samples to Earth.

Desai, Prasun N.↗

Summary of JPL Activities

A viewgraph presentation outlines the Jet Propulsion Laboratory (JPL) flight programs, including past, present and future missions targeting Solar System exploration. Details, including launch dates and batteries used, are given for Deep Space 1 (Asteroid Rendezvous), Deep Space 2 (Mars Penetrator), Mars Global Surveyor, Mars Surveyor '98, Stardust, Europa Orbiter, Mars Surveyor 2001, Mars 2003 Lander and Rover, and Genesis (Solar Dust Return). Earth science projects are also outlined: Active Cavity Radiometer Irradiance Monitor (ARIMSAT), Ocean Topography Experiment (TOPEX/Poseidon), Jason-1 (TOPEX follow-on), and QuikScat/Seawinds (Ocean Winds Tracking). The status, background, and plans are given for several batteries: (1) 2.5 inch common pressure vessel (CPV), (2) 3.5 inch CPV, (3) Ni-H2, and (4) Li-Ion.

Timmerman, Paul J.↗

Thermal Response and Ablation Programs for TPS Sizing Computation

The computer programs developed at NASA Ames Research Center for TPS sizing computation have been applied to many NASA's space missions, such as Mars Pathfinder, StarDust, Mars 2001, DS-II, and Saturn Entry Probe. These computer programs include FIAT (Fully Implicit Ablation and Thermal Response Program, MAT (Multi-component Ablation Thermochemistry Program), TPSX (Thermal Protection Systems Expert & Material Properties Database), and TPSGui (Thermal Protection Systems Graphical User Interface). For most planetary missions, the aerothermodynamics and material response are strongly coupled; thus a closed loop iteration technique between the FIAT and CFD (Computational Fluid Dynamics) codes has been developed to obtain the high fidelity bench mark TPS sizing solution. The computer codes and predictive methods are presented and discussed in detail.

Chen, Y. K.↗

Fully Implicit Ablation and Thermal Response Program for Spacecraft Heatshield Analysis

A fully implicit ablation and thermal response program has been developed for the simulation of one-dimensional transient transport of thermal energy in a multilayer stack of isotropic materials and structure which can ablate from a front surface and decompose in-depth. Equations and numerical procedures for solution are described. Solutions are compared with those of Aerotherm Charring Material Thermal Response and Ablation Program, and with the arcjet data. The code is numerically more stable, and solves much wider range of problems compared with the existing explicit code. Applications of the code for the analysis of aeroshell heatshields of Stardust, Mars 2001, and Mars Microprobe using the advanced Light Weight Ceramic Ablators developed at the NASA Ames Research Center are presented and discussed in detail.

Chen, Y. K.↗

Aerothermal Effects of Cavities and Protuberances for High-Speed Sample Return Capsules

Extraterrestrial sample return is a growing component of solar system exploration. Currently, four missions, Stardust, 1 Muses-C, 2 Genesis, and Mars Sample Return, are under development that employ sample return as a prime component of the mission architecture. Respectively, these missions will return samples from the tail of a comet, an asteroid, the solar wind, and, Mars. An important component of these missions and the focus of this paper is the design of the sample return capsule (SRC). The purpose of the SRC is to safely return to Earth any gathered samples for terrestrial analysis. The two major design constraints for any SRC are as follows: 1) it must be able to survive a high-speed Earth entry (11 km/s to as a high as 15 km/s), 2) the mass of the SRC must be as small as possible. Because the SRC mass is carried from Earth to the sample sight and back, the SRC mass is a strong driver in the mission mass budget. Further, for the Mars Sample Return Capsule, planetary protection is another constraint. For this capsule, the probability of planetary contamination at Earth due to an SRC failure at entry must be minimal. For an SRC, a possible failure mechanism is severe local heating as a result of cavities and or protuberances in the SRC forebody heatshield. For example, the Apollo Command Module had a number of cavities and protuberances as part of the baseline designs Wind-tunnel tests of models containing small cavities and protuberances showed severe local heating augmentations in the vicinity of these surface discontinuities.4-5 As another example, the Genesis SRC forebody heat-shield contains penetrations (cavities) to mount the vehicle to the carrier bus. It is expected that these penetrations will also experience a severe local heating environment. A concern is that the large thermal gradients may produce sufficient thermal stress to cause local mechanical failure of the heatshield. Penetrations to the forebody heat-shield can also result from damage at vehicle integration, during launch, or during transportation of the sample return capsule from earth to the sample site and back. For example, the Starting SRC was damaged near the shoulder during the heatshield integration process producing a local surface discontinuity. Also, the Starting SRC traverses through the tail of a comet and is in space for 7 years. Thus, damage to the heatshield as a result of micrometeroid impact is a concern. Finally, it is difficult to characterize the effects of these potential heatshield singularities with ground-test facilities. Either detailed simulation or a dedicated flight test is required.

Olynick, David↗

Cometary Science After Hale-Bopp

Comets and the chondritic porous interplanetary dust particles (CP IDPs) that they shed in their comae are reservoirs of primitive solar nebula materials. The high porosity and fragility of cometary grains and CP IDPs, and anomalously high deuterium contents of pyroxene-rich CP IDPs imply these aggregate particles contain significant interstellar grain components. Spectrophotometry of comets at thermal IR wavelengths (3-40 microns) reveal the presence of a warm (near-IR) featureless emission modeled by amorphous carbon grains, and mid-IR and far-IR broad and narrow resonances modeled by chondritic (50% Fe and 50% Mg) amorphous and Mg-rich crystalline silicate minerals, respectively. Cometary amorphous silicate resonances are well matched by IR spectra of CP IDPs dominated by 0.1 micron spherules of Glass with Embedded Metal and Sulfides (GEMS) that are thought to be the interstellar Fe-bearing amorphous silicates produced in the cooling outflows of Asymptotic Giant Branch (AGB) stars. Acid-etched microtomed CP IDP samples, however, show that both the carbon phase (aliphatic) and the amorphous silicate phase (Mg-rich) are not optically absorbing while the embedded Fe nanoparticles make the IDPs dark. The CP IDPs suggest either significant processing has occurred in the ISM or that the AGB amorphous silicates have Mg-rich stoichiometry and possibly grew on Fe particle condensates. Cometary crystalline silicate resonances are well matched by IR spectra of laboratory submicron Mg-rich olivine crystals, [Mg(sub y),Fe(sub 1-y)]2SiO4 with y/ge0.85, and in the case of Hale-Bopp at r(sub h) less than or equal to approx. 1.5 AU, by Mg-rich pyroxene crystals, [Mg(sub x),Fe(sub 1-x)]SiO3 with x/ge0.85. While a fraction of AGB stardust (less than or equal to 15%) are Mg-rich crystals, this interstellar star dust component is insufficient to account for the deduced abundance of crystalline minerals in comet dust. An insufficient source of ISM Mg-rich crystals leads to the inference that Mg-rich crystals in comets may be hot, early solar nebula condensates that traveled large radial distances out to the comet-forming zone.

Wooden, Diane H.↗

Comet Grains: Their IR Emission and Their Relation to ISM Grains

Comets and the chodritic, porous interplanetary dust particles (CP IDPs) that they shed in their comae are reservoirs of primitive solar nebula materials. The high porosity and fragility of cometary grains and CP IDPs, and anomalously high deuterium contents of highly fragile, pyroxene-rich Cluster IDPs imply these aggregate particles contain significant abundances of grains from the interstellar medium (ISM). IR spectra of comets (3 - 40 micron) reveal the presence of a warm (nearIR) featureless emission modeled by amorphous carbon grains. Broad and narrow resonances near 10 and 20 microns are modeled by warm chondritic (50% Fe and 50% Mg) amorphous silicates and cooler Mg-rich crystalline silicate minerals, respectively. Cometary amorphous silicates resonances are well matched by IR spectra of CP IDPs dominated by GEMS (0.1 micron silicate spherules) that are thought to be the interstellar Fe-bearing amorphous silicates produced in AGB stars. Acid-etched ultramicrotomed CP IDP samples, however, show that both the carbon phase (amorphous and aliphatic) and the Mg-rich amorphous silicate phase in GEMS are not optically absorbing. Rather, it is Fe and FeS nanoparticles embedded in the GEMS that makes the CP IDPs dark. Therefore, CP IDPs suggest significant processing has occurred in the ISM. ISM processing probably includes in He' ion bombardment in supernovae shocks. Laboratory experiments show He+ ion bombardment amorphizes crystalline silicates, increases porosity, and reduces Fe into nanoparticles. Cometary crystalline silicate resonances are well matched by IR spectra of laboratory submicron Mg-rich olivine crystals and pyroxene crystals. Discovery of a Mg-pure olivine crystal in a Cluster IDP with isotopically anomalous oxygen indicates that a small fraction of crystalline silicates may have survived their journey from AGB stars through the ISM to the early solar nebula. The ISM does not have enough crystalline silicates (<5%) , however, to account for the deduced abundance of crystalline silicates in comet dust. An insufficient source of ISM Mg-rich crystals leads to the inference that most Mg-rich crystals in comets are primitive grains processed in the early solar nebula prior to their incorporation into comets. Mg-rich crystals may condense in the hot (approx. 1450 K), inner zones of the early solar nebula and then travel large radial distances out to the comet-forming zone. On the other hand, Mg-rich silicate crystals may be ISM amorphous silicates annealed at approx. 1000 K and radially distributed out to the comet-forming zone or annealed in nebular shocks at approx. 5 - 10 AU. Determining the relative abundance of amorphous and crystalline silicates in comets probes the relative contributions of ISM grains and primitive grains to small, icy bodies in the solar system. The life cycle of dust from its stardust origins through the ISM to its incorporation into comets is discussed.

Wooden, Diane H.↗