Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

ADVANCED OXIDATION: OXALATE DECOMPOSITION TESTING WITH OZONE

At the Savannah River Site (SRS), oxalic acid is currently considered the preferred agent for chemically cleaning the large underground Liquid Radioactive Waste Tanks. It is applied only in the final stages of emptying a tank when generally less than 5,000 kg of waste solids remain, and slurrying based removal methods are no-longer effective. The use of oxalic acid is preferred because of its combined dissolution and chelating properties, as well as the fact that corrosion to the carbon steel tank walls can be controlled. Although oxalic acid is the preferred agent, there are significant potential downstream impacts. Impacts include: (1) Degraded evaporator operation; (2) Resultant oxalate precipitates taking away critically needed operating volume; and (3) Eventual creation of significant volumes of additional feed to salt processing. As an alternative to dealing with the downstream impacts, oxalate decomposition using variations of ozone based Advanced Oxidation Process (AOP) were investigated. In general AOPs use ozone or peroxide and a catalyst to create hydroxyl radicals. Hydroxyl radicals have among the highest oxidation potentials, and are commonly used to decompose organics. Although oxalate is considered among the most difficult organic to decompose, the ability of hydroxyl radicals to decompose oxalate is considered to be well demonstrated. In addition, as AOPs are considered to be 'green' their use enables any net chemical additions to the waste to be minimized. In order to test the ability to decompose the oxalate and determine the decomposition rates, a test rig was designed, where 10 vol% ozone would be educted into a spent oxalic acid decomposition loop, with the loop maintained at 70 C and recirculated at 40L/min. Each of the spent oxalic acid streams would be created from three oxalic acid strikes of an F-area simulant (i.e., Purex = high Fe/Al concentration) and H-area simulant (i.e., H area modified Purex = high Al/Fe concentration) after nearing dissolution equilibrium, and then decomposed to {le} 100 Parts per Million (ppm) oxalate. Since AOP technology largely originated on using ultraviolet (UV) light as a primary catalyst, decomposition of the spent oxalic acid, well exposed to a medium pressure mercury vapor light was considered the benchmark. However, with multi-valent metals already contained in the feed, and maintenance of the UV light a concern; testing was conducted to evaluate the impact from removing the UV light. Using current AOP terminology, the test without the UV light would likely be considered an ozone based, dark, ferrioxalate type, decomposition process. Specifically, as part of the testing, the impacts from the following were investigated: (1) Importance of the UV light on the decomposition rates when decomposing 1 wt% spent oxalic acid; (2) Impact of increasing the oxalic acid strength from 1 to 2.5 wt% on the decomposition rates; and (3) For F-area testing, the advantage of increasing the spent oxalic acid flowrate from 40 L/min (liters/minute) to 50 L/min during decomposition of the 2.5 wt% spent oxalic acid. The results showed that removal of the UV light (from 1 wt% testing) slowed the decomposition rates in both the F & H testing. Specifically, for F-Area Strike 1, the time increased from about 6 hours to 8 hours. In H-Area, the impact was not as significant, with the time required for Strike 1 to be decomposed to less than 100 ppm increasing slightly, from 5.4 to 6.4 hours. For the spent 2.5 wt% oxalic acid decomposition tests (all) without the UV light, the F-area decompositions required approx. 10 to 13 hours, while the corresponding required H-Area decompositions times ranged from 10 to 21 hours. For the 2.5 wt% F-Area sludge, the increased availability of iron likely caused the increased decomposition rates compared to the 1 wt% oxalic acid based tests. In addition, for the F-testing, increasing the recirculation flow rates from 40 liter/minute to 50 liter/minute resulted in an increased decomposition rate, suggesting a better use of ozone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

TCCR Operational Summary and Optimization for Tank 9 Processing - 20314

Savannah River Remediation (SRR) manages and operates the liquid waste facilities at Savannah River Site (SRS) for the Department of Energy (DOE). Stored liquid waste is a complex mixture of insoluble solids (sludge) and soluble salts in an alkaline solution. SRR has deployed the Tank Closure Cesium Removal (TCCR) system, a tank-side ion exchange process, to remove radioactive cesium from salt waste and enable onsite disposal of the resulting decontaminated salt solution as low-level waste at the Saltstone facilities. The TCCR system consists of two prefilters, four ion exchange (IX) columns, one resin trap, and a ventilation system. The IX process uses a form of inorganic crystalline silicotitanate (CST), which has a high affinity for cesium and other alkali metals, strontium, and actinides. This process is currently deployed utilizing salt feed from Tank 10, with future plans to dissolve solid salt in Tank 9 and transfer the salt solution to Tank 10 for processing through TCCR. The feed for TCCR must be created from salt-cake in Tank 10 through a dissolution process. Once enough salt has been dissolved, a qualification process is entered. This process characterizes the feed and ensures the cesium loading on the columns will not cause boiling of waste within the columns during or after processing. Once the batch has been qualified, salt waste is fed to the TCCR system through a transfer pump in the center of the tank. The waste is filtered through a set of two shielded, dead-end prefilters that prevent solids buildup in the columns. The filtered salt solution then travels to the shielded IX columns, which can be operated individually or in series, where the cesium is sorbed on the CST media. The decontaminated salt solution (DSS) then travels through a resin trap and out of the module to Tank 11. TCCR has successfully processed approximately 795,000 L of Tank 10H radioactive salt waste over two batches to date. There has not yet been a system induced shutdown. The prefilters performed as expected with only minor degradation in recovery of differential pressure after a backflush sequence. The time between backflushes decreased as each batch reached the end of processing. The hydraulics in the IXCs mostly performed as expected at all flow rates, except for one IXC that will be further investigated during Batch 3 processing. The TCCR system has shown some opportunities for more efficient processing during the length of the demonstration so far. For future processing of material from Tank 9H through Tank 10H and the TCCR unit, TCCR 1A will implement changes to the prefilters and the IXCs. The prefilters will have an increased surface area and a new filter media in an effort to increase time between filter swaps and improve backwashing cleaning capability. The IXCs will have a reduced diameter to allow for increased heat transfer out of the column and increased loading of Cs-137. Additionally, a new form of CST with an increased kinetic performance is being investigated for use during TCCR 1A operation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Absence of Nanostructuring in NaPb m SbTe m+2 : Solid Solutions with High Thermoelectric Performance in the Intermediate Temperature Regime

Thermoelectric devices directly convert heat into electrical energy and are highly desired for emerging applications in waste heat recovery. Currently, PbTe based compounds are the leading thermoelectric materials in the intermediate temperature regime (~800 K); however, integration into commercial devices has been limited. This is largely because the performance of PbTe, which is maximized ~900 K, is too low over the temperatures of interest for most potential commercial applications (generally under 600 K). Improving the low temperature performance of PbTe based materials is therefore critical to achieve usage outside of existing niche applications. Here, we provide an in-depth study of the cubic NaPb m SbTe m+2 system of compounds (m = 1-20) and report that it is an excellent class of low- to medium-temperature thermoelectrics when m = 10-20. Here, we show that the as-cast polycrystalline ingots exhibit degenerate p-type conduction and high maximum ZTs of 1.2-1.4 at 650 K when m = 6-20. Because the ingots are found to be extremely brittle, we utilize spark plasma sintering (SPS) to prepare more mechanically robust samples, and surprisingly, find that SPS results in an undesired change in charge transport toward n-type behavior. We show this unanticipated transition from p-type behavior as ingots to n-type after SPS is due to dissolution of secondary phases that are present in the ingots into the primary matrix during the SPS process, resulting in a transformation from an inhomogeneous state to a solid solution without any observable evidence of nanoscale precipitation. This is in sharp contrast to the seemingly similar AgPb m SbTe m+2 (LAST) system, which is heavily nanostructured. The SPSed NaPb m SbTe m+2 is doped p-type by tuning the cation stoichiometry, i.e., Na 1+x Pb m-x Sb 1-y Te m+2 . The optimized compounds have very low lattice thermal conductivities of 1.1-0.55 W·m -1 ·K -1 over 300-650 K, which enhances the low intermediate temperature performance and gives rise to maximum ZT values up to 1.6 at 673 K as well as an excellent ZT avg of 1.1 over 323-673 K for m = 10, 20, making Na 1+x Pb m-x Sb 1-y Te m+2 among the highest performing PbTe-based thermoelectrics under 650 K.

Electrical conductivity↗

Deeper Understanding of Mononuclear Manganese(IV)–Oxo Binding Brønsted and Lewis Acids and the Manganese(IV)–Hydroxide Complex

Binding of Lewis acidic metal ions and Brønsted acid at the metal–oxo group of high-valent metal–oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal–oxo group has been questioned in several cases and remains to be clarified. In this work, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)–oxo complex binding triflic acid, {[(dpaq)Mn IV (O)]–HOTf} + (1–HOTf). First, 1–HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn–O stretching frequencies of 1–HOTf (e.g., ν Mn–O at ~793 cm –1 ) and 1–M n+ (Mn + = Ca 2+ , Zn 2+ , Lu 3+ , Al 3+ , or Sc 3+ ) and the Lewis acidities of H + and M n+ ions, suggesting that H+ and Mn+ bind at the metal–oxo moiety of [(dpaq)Mn IV (O)] + . Interestingly, a single-crystal structure of 1–HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)–oxo complex but a Mn(IV)–hydroxide complex, [(dpaq)Mn IV (OH)](OTf) 2 (4), with a Mn–O bond distance of 1.8043(19) Å and a Mn–O stretch at 660 cm –1 . More interestingly, 4 reverted to 1–HOTf upon dissolution, demonstrating that 1–HOTf and 4 are interconvertible depending on the physical states, such as 1–HOTf in solution and 4 in isolated solid. The reactivity of 1–HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1–Mn+ complexes; an interesting correlation between the Mn–O stretching frequencies of 1–HOTf and 1–M n+ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ecosystem Composition Controls the Fate of Rare Earth Elements during Incipient Soil Genesis

The rare earth elements (REE) are increasingly important in a variety of science and economic fields, including (bio)geosciences, paleoecology, astrobiology, and mining. However, REE distribution in early rock-microbe-plant systems has remained elusive. We tested the hypothesis that REE mass-partitioning during incipient weathering of basalt, rhyolite, granite and schist depends on the activity of microbes, vascular plants (Buffalo grass), and arbuscular mycorrhiza. Pore-water element abundances revealed a rapid transition from abiotic to biotic signatures of weathering, the latter associated with smaller aqueous loss and larger plant uptake. Abiotic dissolution was 39% of total denudation in plant-microbes-mycorrhiza treatment. Microbes incremented denudation, particularly in rhyolite, and this resulted in decreased bioavailable solid pools in this rock. Total mobilization (aqueous + uptake) was ten times greater in planted compared to abiotic treatments, REE masses in plant generally exceeding those in water. Larger plants increased bioavailable solid pools, consistent with enhanced soil genesis. Mycorrhiza generally had a positive effect on total mobilization. The main mechanism behind incipient REE weathering was carbonation enhanced by biotic respiration, the denudation patterns being largely dictated by mineralogy. A consistent biotic signature was observed in La:phosphate and mobilization: solid pool ratios, and in the pattern of denudation and uptake.

58 GEOSCIENCES↗

Unique aqueous Li-ion/sulfur chemistry with high energy density and reversibility

Leveraging the most recent success in expanding the electrochemical stability window of aqueous electrolytes, in this work we create a unique Li-ion/sulfur chemistry of both high energy density and safety. We show that in the superconcentrated aqueous electrolyte, lithiation of sulfur experiences phase change from a high-order polysulfide to low-order polysulfides through solid–liquid two-phase reaction pathway, where the liquid polysulfide phase in the sulfide electrode is thermodynamically phase-separated from the superconcentrated aqueous electrolyte. The sulfur with solid–liquid two-phase exhibits a reversible capacity of 1,327 mAh/(g of S), along with fast reaction kinetics and negligible polysulfide dissolution. By coupling a sulfur anode with different Li-ion cathode materials, the aqueous Li-ion/sulfur full cell delivers record-high energy densities up to 200 Wh/(kg of total electrode mass) for >1,000 cycles at ~100% coulombic efficiency. These performances already approach that of commercial lithium-ion batteries (LIBs) using a nonaqueous electrolyte, along with intrinsic safety not possessed by the latter. We conclude the excellent performance of this aqueous battery chemistry significantly promotes the practical possibility of aqueous LIBs in large-format applications.

25 ENERGY STORAGE↗

Trace element cycling through iron oxide minerals during redox-driven dynamic recrystallization

Microbially driven iron redox cycling in soil and sedimentary systems, including during diagenesis and fluid migration, may activate secondary abiotic reactions between aqueous Fe(II) and solid Fe(III) oxides. These reactions catalyze dynamic recrystallization of iron oxide minerals through localized and simultaneous oxidative adsorption of Fe(II) and reductive dissolution of Fe(III). Redox-active trace elements undergo speciation changes during this process, but the impact redox-driven recrystallization has on redox-inactive trace elements associated with iron oxides is uncertain. Here we demonstrate that Ni is cycled through the minerals goethite and hematite during redox-driven recrystallization. X-ray absorption spectroscopy demonstrates that during this process adsorbed Ni becomes progressively incorporated into the minerals. Kinetic studies using batch reactors containing aqueous Fe(II) and Ni preincorporated into iron oxides display substantial release of Ni to solution. We conclude that iron oxide recrystallization activated by aqueous Fe(II) induces cycling of Ni through the mineral structure, with adsorbed Ni overgrown in regions of Fe(II) oxidative adsorption and incorporated Ni released in regions of reductive dissolution of structural Fe(III). The redistribution of Ni among the mineral bulk, mineral surface, and aqueous solution appears to be thermodynamically controlled and catalyzed by Fe(II). Our work suggests that important proxies for ocean composition on the early Earth may be invalid, identifies new processes controlling micronutrient availability in soil, sedimentary, and aquatic ecosystems, and points toward a mechanism for trace element mobilization during diagenesis and enrichment in geologic fluids.

54 ENVIRONMENTAL SCIENCES↗

Reversible migration of silver on memorized pathways in Ag-Ge{sub 40}S{sub 60} films

Reversible and reproducible formation and dissolution of silver conductive filaments are studied in Ag-photodoped thin-film Ge{sub 40}S{sub 60} subjected to electric fields. A tip-planar geometry is employed, where a conductive-atomic-force microscopy tip is the tip electrode and a silver patch is the planar electrode. We highlight an inherent “memory” effect in the amorphous chalcogenide solid-state electrolyte, in which particular silver-ion migration pathways are preserved “memorized” during writing and erasing cycles. The “memorized” pathways reflect structural changes in the photodoped chalcogenide film. Structural changes due to silver photodoping, and electrically-induced structural changes arising from silver migration, are elucidated using Raman spectroscopy. Conductive filament formation, dissolution, and electron (reduction) efficiency in a lateral device geometry are related to operation of the nano-ionic Programmable Metallization Cell memory and to newly emerging chalcogenide-based lateral geometry MEMS technologies. The methods in this work can also be used for qualitative multi-parameter sampling of metal/amorphous-chalcogenide combinations, characterizing the growth/dissolution rates, retention and endurance of fractal conductive filaments, with the aim of optimizing devices.

36 MATERIALS SCIENCE↗

Elucidating Actinide–Pertechnetate and Actinide–Perrhenate Bonding via a Family of Th–TcO 4 and Th–ReO 4 Frameworks and Solutions

Technetium-99, a β-emitter produced from 235 U fission, poses a challenge for the nuclear industry due to co-extraction of pertechnetate (TcO 4 – ) with the actinides (An) during nuclear fuel reprocessing. Previous studies suggested that direct coordination of pertechnetate with An plays an important role in the coextraction process. However, few studies have provided direct evidence for An–TcO 4 – bonding in the solid state, and even fewer in solution. The present study describes synthesis and structural elucidation of a family of thorium(IV)-pertechnetate/perrhenate (ReO 4 – , nonradioactive surrogate) compounds, which is obtained by dissolution of thorium oxyhydroxide in perrhenic/pertechnic acid followed by crystallization, with or without heating. For reaction ratios of 3:1, 4:1, and 6:1 MO 4 – /Th(IV) (M = Tc, Re), the crystallized compounds reflect the same ratio, suggesting facile and flexible coordination. Furthermore, nine structures reveal 1-dimensional and 2-dimensional frameworks with varying topologies. While a multitude of compounds isolated from 4:1 (and 6:1) reaction solutions feature Th monomers linked by MO 4 – , the 3:1 reaction solution yielded the well-known dihydroxide-bridged thorium dimer, linked, and capped by MO 4 – . Density functional theory calculations on ReO 4 – /TcO 4 – isomorphs suggest similar bonding characteristics in the solid state, but experimental solution characterization noted differences. Specifically, small-angle X-ray scattering studies suggest the bonding of Th–TcO 4 – persists in solution, while Th–ReO 4 – bonding is less apparent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced chemical CRUD decontamination combined with electrokinetic process - 15242

This study has tested about the deposition and dissolution of Chalk River Unidentified Deposit (CRUD), and investigated the remediation of CRUD. CRUD is an accumulated corrosion product on external fuel rod cladding surfaces and composed of either dissolved ions or solid particles such as Ni and Co. As nuclear power plants are getting older, decontaminating process has been concerned due to increased contamination. Corrosion product can be activated through nuclear reaction to form radionuclide such as Co-60. Because the CRUD is formed at cladding surface and radionuclides can be contained in CRUD, it can affect to human health and environment. Therefore CRUD needs to be removed safely during NPP's decontaminating process by efficient. In order to decontaminate the CRUD, first thing it has to be dissolved and removed. Deposition behavior of corrosion products has been well studied, but the study about behavior of CRUD dissolution is required in various environments. In this study, the CRUD synthesis, the dissolution method of CRUD, and the CRUD decontamination method was investigated. There are three major approaches the remediation of CRUD. First one is well synthesized the CRUD, second one is finding the optimum condition for CRUD dissolution, and last one is applying the Electro-Kinetic (EK) process to CRUD remediation. Synthesis of simulated CRUD for the decontamination experiments was successful. The combination of EK process with chemical decontamination of CRUD proved to be a more economical method for removing CRUD; it can be directly applied to the NPP decommissioning and decontamination process, and it can decrease the volume of secondary radioactive waste as well. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of silica-enriched cement-based materials with improved aging resistance for application in high-temperature environments

Understanding the effects of high temperature (HT) and high pressure (HP) conditions on the microstructure of cement-based materials is critical to the construction and safe operation of deep oil and gas wells. Under such conditions, the persistence of calcium-silicate-hydrate (C-S-H) gel is compromised by ongoing crystallization that, if not controlled, may adversely affect the durability of the cement sheath. This work investigates the effect of silica content >35% by-weight-of-cement (BWOC), silica particle size, and solid volume fraction (SVF) on the microstructure and phase composition of cement-silica blends cured hydrothermally at 200 °C and 20.7 MPa. The results of X-ray diffraction and electron microprobe analysis revealed significant impact of these three mix design parameters on the final phase assembly, and on the conversion rate of semi-crystalline C-S-H to gyrolite and 11 Åtobermorite. Incorporation of more fine siliceous material suppressed dissolution of coarse silica particles, resulting in a matrix with improved homogeneity and dominated by fine gel pores. Mixes with lower SVF showed greater formation of 11 Å tobermorite, a higher degree of crystallinity and/or greater crystallite size. Prolonged HTHP curing of all systems (up to three months in this study), irrespective of the initial SVF, increased the fraction of capillary pores, indicating void coalesce caused by crystal growth. However, we find that this coarsening is less pronounced in systems with less pore space available for crystallization.

36 MATERIALS SCIENCE↗

Accurately constituting robust interfaces for high-performance high-energy lithium metal batteries

High-energy lithium metal batteries (LMBs) have received ever-increasing interest. Among them, coupling lithium metal (Li) with nickel-rich material, LiNi x Mn y Co z O 2 (NMCs, x ≥ 0.6, x + y + z = 1), is promising because Li anodes enable an extremely high capacity (∼3860 mA h g −1 ) and the lowest redox potential (−3.04 V vs. standard hydrogen electrode), while NMCs can achieve a much higher capacity of ∼200 mA h g −1 and lower cost than those of LiCoO 2 . However, the resultant Li‖NMC cells have been hindered from commercialization due to a series of challenges related to the interface stability of both Li anodes and NMC cathodes. Specifically, Li anodes suffer from Li dendritic growth and the formation of solid electrolyte interphase (SEI), while NMC cathodes suffer from the formation of cathode electrolyte interphase (CEI) and other interface-related issues, including transition metal dissolution, oxygen release, cracking, and so on. To tackle these issues, recently, two sister techniques, atomic and molecular layer deposition (ALD and MLD), have emerged and exhibit tremendous capabilities to accurately constitute robust interfaces to achieve high-performance Li‖NMC LMBs. They can uniquely develop uniform and conformal films as surface coatings of LMBs in a precisely controllable mode at the atomic/molecular level, while proceeding with film deposition at low temperatures (e.g., ≤250 °C). In this Feature Article, we review the latest research progress in developing novel surface coatings via ALD and MLD for Li‖NMC LMBs and discuss outcomes for pursuing high performance.

25 ENERGY STORAGE↗

Pressure effects on phase equilibria and solid solubility in MgO-Y2O3 nanocomposites

We study the temperature and pressure dependence of phase evolution in the 0.5MgO-0.5Y{sub 2}O{sub 3} nanocomposite system using a diamond anvil apparatus in conjunction with in situ synchrotron energy dispersive x-ray diffraction at 7 GPa hydrostatic pressure. At (298 K, 7.0 GPa), structural transformations in the Y{sub 2}O{sub 3} phase are observed, giving rise to the co-existence of its cubic, hexagonal, and monoclinic polymorphs together with cubic MgO. An increase in temperature to 1273 K causes the crystallinity of the Y{sub 2}O{sub 3} hexagonal and monoclinic phases to increase. Isothermal and isobaric hold at (1273 K, 7.0 GPa) for 60 min results in yttrium dissolution in cubic MgO, causing {approx}1.0% expansive volumetric lattice strain despite the large differences in the ionic radii of the cations. Cooling the nanocomposite to (298 K, 0 GPa) after a 60 min soak yields four phase co-existence among cubic MgO and cubic, hexagonal, and monoclinic Y{sub 2}O{sub 3}. The residual MgO unit cell volume expansion is 0.69% at 298 K, indicating solid solution formation at room temperature despite large differences in the ionic radii of Mg{sup 2+} and Y{sup 3+}. The macroscopic shrinkage due to densification is 3% by volume. Thermodynamic considerations suggest that the relative molar partial volume of Y{sup 3+} in MgO is a negative quantity, indicating that the partial molar volume of Y{sup 3+} in the solid solution is smaller than its molar volume in the pure state. Aging of the nanocomposites for 240 h does not change the observed 4 phase co-existence. We propose a crystallographic model in which the observed volumetric expansion of the MgO unit cell is primarily attributed to two hydrostatic expansive strain components accompanying solid solution formation: (i) Coulomb repulsion among O{sup 2-} ions in the immediate vicinity of Mg{sup 2+} vacancies, and (ii) misfit strain due to differences in ionic radii upon Y{sup 3+} substitution on Mg{sup 2+} sites.

36 MATERIALS SCIENCE↗

Direct Visualization of Drug–Polymer Phase Separation in Ritonavir–Copovidone Amorphous Solid Dispersions Using in situ Synchrotron X-ray Fluorescence Imaging of Thin Films

Amorphous solid dispersions (ASDs) are new formulations currently being used in pharmaceutical industry. The ASDs, in which amorphous drug and polymeric excipients are intimately mixed at a molecular level, exhibit dramatically enhanced solubility and dissolution characteristics relative to their crystalline drug counterparts. In the process of achieving an ever-increasing drug loading (DL), it is noticed however, that the drug release profile deteriorates significantly beyond a certain DL. As an example, a ritonavir-copovidone ASD achieves continuous and full drug release when DL ≤ 25 wt%. The release drops at 30 wt% and when DL > 30 wt% there is virtually no drug release, behaving like a pure amorphous drug. In this communication, the dissolution behavior of ASD thin films has been investigated by in situ synchrotron X-ray fluorescence (XRF) imaging to elucidate the mechanism for the unique change in extent of drug release as a function of DL. It is found that the drug release profile correlates well with the amorphous-amorphous phase separation (AAPS) onset. At a lower drug loading (up to 20 wt%), it takes more than 12 hours for AAPS to happen while in sharp contrast, it only needs less than 10 minutes for DL > 30 wt%. During AAPS amorphous drug accumulates on the surface of the film which prevents further dissolution from the interior of the ASD. The current study provides a mechanistic understanding of the confounding drug release profile of ASDs as a function of DL, and opens the door for studying drug-excipient (e.g. polymer, surfactant) interactions via XRF imaging in the future.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Manganese‐Based Spinel Cathodes: A Promising Frontier for Solid‐State Lithium‐Ion Batteries

Recently, all-solid-state lithium-ion batteries (ASSLIBs), which exhibit improved safety and enhanced energy density compared to conventional commercialized lithium-ion batteries (LIBs), thereby have garnered extensive research interest. Among the promising cathode candidates, Mn-based spinel cathodes LiMn 2 O 4 (LMO) and LiNi 0.5 Mn 1.5 O 4 (LNMO), with the unique characteristics of low cost, structural stability, and 3D Li-ion diffusion channels, have demonstrated excellent performance in LIBs and presented great potential in ASSLIBs applications. However, several challenges, including structural degradations, poor interfacial contact, large interfacial resistance, and Mn-dissolution/diffusion during the electrochemical cycling, hinder their practical applications and commercialization in the ASSLIBs. Particularly, the high-voltage LNMO cathodes suffer from the challenge of electrochemical incompatibility with most of the solid-state electrolytes (SSEs). Herein, the spinel structure, the electrochemical behavior, and the structural degradation of the LMO/LNMO are explored. The characteristics and recent progress of the mitigating strategies to the challenges of various SSEs, including polymer-, oxide-, composite-, sulfide-, halide-, and LiPON-based SSEs, are introduced when paired with LMO/LNMO. Finally, the directions for future research to advance Mn-based spinel cathodes and fulfill the requirements of the next-generation ASSLIBs are also discussed.

Dou, Yu [Concordia University, Montreal, QC (Canad↗

Study on the mechanism of liquid phase sintering (M-12)

The objectives were to (1) obtain the data representing the growth rate of solid particles in a liquid matrix without the effect of gravity; and (2) reveal the growth behavior of solid particles during liquid phase sintering using the data obtained. Nickel and tungsten are used as the constituent materials in liquid phase sintering. The properties of the constituent metals are given. When a compact of the mixture of tungsten and nickel powders is heated and kept at 1550 C, nickel melts down but tungsten stays solid. As the density of tungsten is much greater than that of nickel, the sedimentation of tungsten particles occurs in the experiment on Earth. The difference between the experiments on Earth and in space is illustrated. The tungsten particles sink to the bottom and are brought into contact with each other. The resulting pressure at the contact point causes the accelerated dissolution of tungsten. Consequently, flat surfaces are formed at the contact sites. As a result of dissolution and reprecipitation of tungsten, the shape of particles changes to a polygon. This phenomenon is called 'flattening.' An example of flattening of tungsten particles is shown. Thus, the data obtained by the experiment on Earth may not represent the exact growth behavior of the solid particles in a liquid matrix. If the experiments were done in a microgravity environment, the data corresponding to the theoretical growth behavior of solid particles could be achieved.

Kohara, S.↗

Caustic Neutralization and Precipitation of Acidic Dissolved Simulated Stainless Steel–Clad Plutonium and Plutonium/Uranium Nuclear Fuel

Simulated dissolved stainless steel (SS) clad Pu and Pu/U nuclear fuel in HNO 3 was neutralized to a free hydroxide (OH - ) concentration of 0.6 M. A thermal neutron poison, Gd, was added to the simulants at concentrations of either ~3 - 6 g/L or ~37 - 38 g/L. The supernate Pu concentration the day of neutralization ranged from 0.48 to 8.75 mg/L. The supernate Pu concentration of a simplified simulant neutralized to 0.6 M OH - above precipitated solids containing Pu was demonstrated to decrease over 18 days. A significant portion of precipitated Pu was found to be insoluble in 8 M HNO 3 at ambient temperature, but essentially quantitative Pu dissolution was achieved in 11.5 M HNO 3 /0.1 M KF at 100 °C. The difficulty in dissolving the Pu precipitate is believed to be due to the formation of refractory PuO 2 •xH 2 O during the neutralization process. Initial Gd concentrations of ~37 – 38 g/L were found to result in a greater Al precipitation when neutralized to 0.6 M OH - than initial Gd concentrations of ~3 – 6 g/L. Physical properties of the resultant slurries were measured and used to calculate limiting flowrates and slurry velocities by gravity only in transfer piping between the Savannah River Site’s H-Canyon Facility and the Concentration, Storage, and Transfer Facility (CSTF). These results were compared to calculated deposition velocities to predict if solids would settle during the transfer. The Newtonian model was found to be reasonable for each diluted slurry evaluated. Deposition velocities of Pu containing slurries are lower than nuclear fuel slurries primarily composed of U due to the high density of Pu solids. In conclusion, dilution of slurries reduces the margin between the slurry and deposition velocities due to the reduction in viscosity because higher viscous forces on the particles promote maintained suspension.

Actinide Neutralization↗