Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning Electron Microscopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Fracture surface characteristics of off-axis composites

The fracture surface characteristics of off-axis high-modulus graphite-fiber/epoxy composite specimens were studied, using a scanning electron microscope (SEM). The specimens were subjected to tensile loading at various angles (0 deg - 90 deg) to the fiber direction. SEM photomicrographs of the fractured surfaces revealed three different load angle regions with distinct fracture characteristics. Based on these revelations, criteria were established which can be used to characterize fracture surfaces with respect to a predominant single stress fracture mode.

Sinclair, J. H.↗
NASA NTRS1977

Mechanical behavior and fracture characteristics of off-axis fiber composites. 1: Experimental investigation

The mechanical behavior, fracture surfaces, and fracture modes of unidirectional high-modulus graphite-fiber/epoxy composites subjected to off-axis tensile loads were investigated experimentally. The investigation included the generation of stress-strain-to-fracture data and scanning electron microscope studies of the fractured surfaces. The results led to the identification of fracture modes and distinct fracture surface characteristics for off-axis tensile loading. The results also led to the formulation of critical for identifying and characterizing these fracture modes and their associated fracture surfaces. The results presented and discussed herein were used in the theoretical investigation and comparisons described in Part 2. These results should also provide a good foundation for identifying, characterizing, and quantifying fracture modes in both off-axis and angle-plied laminates.

Sinclair, J. H.↗
NASA NTRS1977

Optical and electrical properties of ion beam textured Kapton and Teflon

An electron bombardment argon ion source was used to ion etch polyimide (Kapton) and fluorinated ethylene, FEP (Teflon). Samples of polyimide and FEP were exposed to (0.5-1.0) keV Ar ions at ion current densities of (1.0-1/8) mA/sq cm for various exposure times. Changes in the optical and electrical properties of the samples were used to characterize the exposure. Spectral reflectance and transmittance measurements were made between 0.33 and 2.16 micron m using an integrating sphere after each exposure. From these measurements, values of solar absorptance were obtained. Total emittance measurements were also recorded for some samples. Surface resistivity was used to determine changes in the electrical conductivity of the etched samples. A scanning electron microscope recorded surface structure after exposure. Spectral optical data, resistivity measurements, calculated absorptance and emittance measurements are presented along with photomicrographs of the surface structure for the various exposures to Ar ions.

Mirtich, M. J.↗
NASA NTRS1977

Inert gas thrusters

Inert gases, particularly argon and xenon, are of interest as possible alternatives to the usual electric thruster propellants of mercury and cesium. Hollow cathode data were obtained for a wide range of operating conditions. Some test conditions gave plasma coupling voltages at or below the sputtering threshold, hence should permit long operating lifetimes. All observations of hollow cathode operation were consistent with a single theory of operation, in which a significant amount of the total electron emission is from localized areas within the orifice. This mode of emission is also supported by scanning electron microscope photographs that indicate local temperatures at or near the melting temperature of the tungsten tip. Experimental hollow cathode performance was correlated for two orifice diameters, three inert gas propellants, and a range of flow rates for each propellant. The basic theory for the production of doubly ionized argon and xenon was completed. Experimental measurements of the doubly ionized fraction agree with theory within about plus or minus 20 percent. High voltage isolators were studied for the propellant feed line. The breakdown voltage per segment ranged from 300 to over 500 V with argon.

Kaufman, H. R.↗
NASA NTRS1978

High resolution masks for ion milling pores through substrates of biological interest

The feasibility was investigated of electrochemically oxidizing vapor deposited aluminum coatings to produce porous aluminum oxide coatings with submicron pore diameters and with straight channels normal to the substrate surface. Porous aluminum oxide coatings were produced from vapor deposited aluminum coatings on thin stainless steel (304), copper, Teflon (FEP) and Kapton substrates and also on pure aluminum substrates. Scanning electron microscope examination indicated that porous oxide coatings can be produced with straight channels, appropriate pore diameters and none or minimal intervening residual aluminum. The oxide coatings on the copper and Kapton substrates had the straightest channels and in general were superior to those fabricated on the other substrate materials. For oxide coatings fabricated at 600 V and 300 V, pore diameters were 0.4-0.6, and 0.3 micron with center-to-center spacing of 0.7-0.8, and 0.4 micron, respectively. Estimated direct labor and materials costs to prepare an oxide mask is anticipated to be about $4-$6 per square foot.

Donovan, S. S.↗
NASA NTRS1977

Effects of radiation upon the light-sensing elements of the retina as characterized by scanning electron microscopy

A model system using Necturus maculosus, the common mudpuppy, was established for evaluating effects of radiation upon the light-sensing elements of the retina. Accelerated heavy ions of helium and neon from the Berkeley Bevalac were used. A number of criteria were chosen to characterize radiation damage by observing morphological changes with the scanning electron microscope. The studies indicated retina sensitivity to high-LET (neon) particles at radiation levels below 10 rads (7 particles per visual element) whereas no significant effects were seen from fast helium ions below 50 rads.

Malachowski, M. J.↗
NASA NTRS1977

Nondestructive determination of the depth of planar p-n junctions by scanning electron microscopy

A method was developed for measuring nondestructively the depth of planar p-n junctions in simple devices as well as in integrated-circuit structures with the electron-beam induced current (EBIC) by scanning parallel to the junction in a scanning electron microscope (SEM). The results were found to be in good agreement with those obtained by the commonly used destructive method of lapping at an angle to the junction and staining to reveal the junction.

Chi, J.-Y.↗
NASA NTRS1977

SEM analysis of ionizing radiation effects in linear integrated circuits

A successful diagnostic technique was developed using a scanning electron microscope (SEM) as a precision tool to determine ionization effects in integrated circuits. Previous SEM methods radiated the entire semiconductor chip or major areas. The large area exposure methods do not reveal the exact components which are sensitive to radiation. To locate these sensitive components a new method was developed, which consisted in successively irradiating selected components on the device chip with equal doses of electrons /10 to the 6th rad (Si)/, while the whole device was subjected to representative bias conditions. A suitable device parameter was measured in situ after each successive irradiation with the beam off.

Stanley, A. G.↗
NASA NTRS1977

Wear studies on aircraft brake materials

An investigation of both worn surfaces of friction pads and steel rotors which are being applied in current aircraft brakes has been carried out by employing an X-ray diffraction technique. It consists of the analysis of chemical element distribution in the surface layers. The wear particles were also examined by using the scanning electron microscope. The initiation and growth of surface cracks and the oxidation were emphasized in this investigation. A wear model was proposed for the current aircraft brake materials. Essentially this model proposed that cracks are formed in the surface layer of the brake material due to the normal and frictional stresses. It is primarily surface temperature dependent.

Ho, T. L.↗
NASA NTRS1978

Oxide morphology and spalling model for NiAl

A scanning electron microscope equipped with an energy dispersive spectrographic unit was used to study in detail the Al2O3 oxide morphology and oxide-metal interface of a nickel-rich NiAl alloy (Ni-42 at% Al) with a view toward providing information relevant to spalling theories in the MCrAlY system. In addition, the kinetics of spalling was studied for critical evaluation of one of the step-process spall models and for collection of pertinent experimental data. Cyclic oxidation tests were run in 1-atm air at about 1100 C, and isothermal specimens were examined from 2 min to 200 hr of exposure. It is shown that oxide spalling occurs primarily at the oxide-metal interface in an intergranular mode, that crystallographic Kirkendall voids arise as a result of oxidation, and that the fractional area of spalled oxide varies widely in cyclic tests but increases with the square of oxide thickness for isothermal tests. A spall model is developed in the form of a summation series.

Smialek, J. L.↗
NASA NTRS1977

Fracture surface characteristics of off-axis composites

The fracture surface characteristics of off-axis high-modulus graphite-fiber/epoxy composite specimens were studied using a scanning electron microscope (SEM). The specimens were subjected to tensile loading at various angles (0-90 deg) to the fiber direction. SEM photomicrographs of the fractured surfaces revealed three different load angle regions with distinct fracture characteristics. Based on these revelations, criteria were established which can be used to characterize fracture surfaces with respect to a predominant 'single-stress' fracture mode.

Sinclair, J. H.↗
NASA NTRS1975

Surface morphology and chemistry of rusty particle 60002,108

Scanning electron microscope, energy dispersive X-ray, and microprobe analyses of the surface of rusty colored particle 60002,108 from deep core 60002 reveal the particle to be basically metallic Ni-Fe that probably grew in contact with silicate minerals, principally plagioclase and pyroxene, and was later partially oxidized and hydrated. A yellowish wrinkled and 'shatter cone' like granular material that is either iron oxide or oxyhydrate may have formed while the particle was in the lunar environment. Ruby-red mounds of lawrencite formed, and the reaction of lawrencite, metallic Ni-Fe, and water vapor resulted in aprons of iron oxyhydrate that surrounds these mounds and flows out over the preexisting yellowish granular substrate. The observations do not allow one to distinguish unequivocally between the initiation of hydration of the ruby-red lawrencite mounds in the lunar environment followed by reaction in the terrestrial and/or spacecraft environment or only reaction in the terrestrial and/or spacecraft environment. The relationship of the lawrencite-rich mounds to the yellowish granular substrate favors the first possibility.

Carter, J. L.↗
NASA NTRS1978

A Schottky-barrier solar cell on sliced polycrystalline GaAs

Antireflecting-metal-oxide-semiconductor (AMOS) technology has been applied to sliced wafers of polycrystalline GaAs having grain sizes of about 100 microns. Simulated AM1 sunlight efficiencies up to 14% were obtained, and studies using the scanning electron microscope showed that grain boundaries have a minimal effect on short-circuit current density. However, current-voltage characteristics show some influence on open-circuit voltage.

Yeh, Y. C. M.↗
NASA NTRS1978

Analysis of the interaction of an electron beam with a solar cell. I. II

The short-circuit current generated by the electron beam of a scanning electron microscope when it impinges on the N-P junction of a solar cell is known to be dependent on the configuration used to investigate the cell's response, and the situation for one specific configuration is analyzed. This configuration is the case in which the highly collimated electron beam strikes the edge of a planar junction a variable distance away from the edge of the depletion layer. An earlier treatment is generalized to encompass the ohmic contact at the back surface. The analysis employing Fourier and Wiener-Hopf techniques shows that it is impractical to determine the bulk diffusion length of a solar cell by a SEM used in the studied configuration unless the ohmic contact is partially removed.

Von Roos, O.↗
NASA NTRS1980

Solar-cell defect analyzer

Laser-Scanning System pinpoints imperfections in solar cells. Entire solar panels containing large numbers of cells can be scanned. Although technique is similar to use of scanning electron microscope (SEM) to locate microscopic imperfections, it differs in that large areas may be examined, including entire solar panels, and it is not necessary to remove cover glass or encapsulants.

Gauthier, M. K.↗
NASA NTRS1979

Characterization of the adsorption of water vapor and chlorine on microcrystalline silica

The characterization of water adsorption on silica is necessary to an understanding of how hydrogen chloride interacts with silica. The adsorption as a function of outgas temperatures of silica and as a function of the isotherm temperature was studied. Characterization of the silica structure by infrared analysis, X-ray diffraction and differential scanning calorimetry, surface area determinations, characterization of the sample surface by electron spectroscopy for chemical analysis (ESCA), and determinations of the heat of immersion in water of silica were investigated. The silica with a scanning electron microscope was examined.

Skiles, J. A.↗
NASA NTRS1977

Analysis of aerospace nickel-cadmium battery cells

Various steps followed in analyzing the electrolyte, separator, and electrodes are reviewed. Specific emphasis is given to scanning electron microscopic and metallographic analysis of the plates. Cadmium migration is defined, its effects and causes are examined, and methods for its reduction in cells are suggested.

Eliason, R. R.↗
NASA NTRS1979

Investigation of medium and high temperature phase change materials

A detailed description of the programs for acquisition and analysis of the test results is given. Basically it concerns three programs. The TEST program controls the recording of the test data. With the THELLI program it is possible to follow the temperature curve recorded for each individual thermoelement during the test. With the AUSW program the test data can be analyzed, to determine, for example, the melting point and the start of melting. The first results of the service life tests are discussed. From these it is attempted to draw inferences for the subsequent tests. An attempt is made to focus on the determination of the area-related mass loss, the reduction in thickness and the corrosion rate as well as optical and scanning electron microscope evaluation.

Heine, D.↗