Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

JPL field measurements at the Finney County, Kansas, test site, October 1976: Meteorological variables, surface reflectivity, surface and subsurface temperatures

Data collected at the Finney County, Kansas test site as part of the Joint Soil Moisture Experiment (JSME) are presented here, prior to analysis, to provide all JSME investigators with an immediate source of primary information. The ground-truth measurements were taken to verify and complement soil moisture data taken by microwave and infrared sensors during aircraft overflights. Measurements were made of meteorological variables (air speed, temperature, relative humidity, and rainfall), surface reflectivity, and temperatures at and below the surface.

Kahle, A. B.↗
NASA NTRS1980

Dependence of the spectral surface irradiance on aerosol properties and surface reflectivity

A reduction in global surface irradiance occurs with increasing aerosol loadings when the aerosols are absorbing. For scattering aerosols, a reduction is pronounced for isotropic scattering (characteristic of small particles) but reduction is not as significant for scattering with a high anisotropy of a large forward peak (characteristic of large particles). This distinction between isotropic and anisotropic scattering becomes small or null over highly reflecting terrain; and for reflectivities higher than 0.5 and solar elevation angles close to the zenith, the global irradiance can be slightly higher for isotropic scattering than in the case of an anisotropy of a forward peak. Under such conditions, which can be encountered in reflective infrared bands over dense vegetation or over sandy deserts (close to noon, in low latitudes) the surface irradiance becomes nearly independent of the aerosol optical thickness.

Otterman, J.↗
NASA NTRS1981

Calculation of surface temperature and surface fluxes in the GLAS GOM

Because the GLAS model's surface fluxes of sensible and latent heat exhibit strong 2 delta t oscillations at the individual grid points as well as in the zonal hemispheric averages and because a basic weakness of the GLAS model lower evaporation over oceans and higher evaporation over land in a typical monthly simulation, the GLAS model PBL parameterization was changed to calculate the mixed layer temperature gradient by solution of a quadratic equation for a stable PBL and by a curve fit relation for an unstable PBL. The new fluxes without any 2 delta t oscillation. Also, the geographical distributions of the surface fluxes are improved. The parameterization presented is incorporated into the new GLAS climate model. Some results which compare the evaporation over land and ocean between old and new calculations are appended.

Sud, Y. C.↗
NASA NTRS1981

Inference of sea surface temperature, near surface wind, and atmospheric water by Fourier analysis of Scanning Multichannel Microwave Radiometer data

The Scanning Multichannel Microwave Radiometer measures thermal microwave emission from the earth in both polarizations at wavelengths of 0.8, 1.4, 1.7, 2.8 and 4.6 cm. Similar instruments were launched on Nimbus 7 and Seasat. Both spatial resolution on the earth and relative sensitivity to different geophysical parameters change with wavelength. Therefore, spatial Fourier components of geophysical parameters are inferred from the corresponding Fourier components of the radiometer measurements, taking into account the different dependence of signal-to-noise ratio on spatial frequency for each radiometer wavelength. The geophysical parameters are sea surface temperature, near-surface wind speed, integrated water vapor mass, integrated liquid water mass, and the product of rainfall rate with height of the rain layer. The capabilities and limitations of the inversion method are illustrated by means of data from the North Atlantic and from tropical storms.

Rosenkranz, P. W.↗
NASA NTRS1984

Surface accuracy measurement sensor test on a 50-meter antenna surface model

The Surface Accuracy Measurement Sensor (SAMS) is a telescope with a focal plane photo electric detector that senses the lateral position of light source targets in its field of view. After extensive laboratory testing the engineering breadboard sensor system was installed and tested on a 30 degree segment of a 50-meter diameter, mesh surface, antenna model. Test results correlated well with the laboratory tests and indicated accuracies of approximately 0.59 arc seconds at 21 meters range. Test results are presented and recommendations given for sensor improvements.

Spiers, R. B.↗
NASA NTRS1984

Multivariate optimum interpolation of surface pressure and surface wind over oceans

The present multivariate analysis method for surface pressure and winds incorporates ship wind observations into the analysis of surface pressure. For the specific case of 0000 GMT, on February 3, 1979, the additional data resulted in a global rms difference of 0.6 mb; individual maxima as larse as 5 mb occurred over the North Atlantic and East Pacific Oceans. These differences are noted to be smaller than the analysis increments to the first-guess fields.

Bloom, S. C.↗
NASA NTRS1987

Nitrogen recombination on high-temperature reusable surface insulation and the analysis of its effect on surface catalysis

The energy transfer catalytic recombination coefficients for nitrogen and oxygen on a borosilicate glass are determined in nitrogen and air hypersonic arc jet streams. These data, obtained from a reacting boundary-layer analysis with first-order surface reaction kinetics, compare well with earlier results from a Goulard frozen boundary-layer model up to 1600 K. The apparent surface recombination rates increase up to 1600 K, then begin to decrease. To illustrate the effects of temperature and nitrogen dissociation on energy transfer to the glass, a diffusional heat-flux is calculated using the present results from 1450 K up to 1850 K. This diffusional heat-flux is the contribution to the total heating rate by atom recombination, and is used to compare the present results with coefficients from three previous studies.

Kolodziej, Paul↗
NASA NTRS1988

Generation of a crowned pinion tooth surface by a surface of revolution

A method of generating crowned pinion tooth surfaces using a surface of revolution is developed. The crowned pinion meshes with a regular involute gear and has a prescribed parabolic type of transmission errors when the gears operate in the aligned mode. When the gears are misaligned the transmission error remains parabolic with the maximum level still remaining very small (less than 0.34 arc sec for the numerical examples). Tooth contact analysis (TCA) is used to simulate the conditions of meshing, determine the transmission error, and determine the bearing contact.

Litvin, F. L.↗
NASA NTRS1988

Relationships between near-surface plankton concentrations, hydrography, and satellite-measured sea surface temperature

Sea surface temperatures (SSTs) mapped by IR satellite images and in situ hydrographic measurements off the west coast of British Columbia for early-winter and midsummer periods were correlated with in situ measurements of surface chlorophyll and zooplankton concentration. Correlations between winter log(e) transformed zooplankton concentrations and SSTs demonstrated that IR satellite imagery could explain 49 percent of the sampled zooplankton concentration variance. A least-squares-fit nonlinear equation showed that satellite-measured SST patterns explained 72 percent of the log(e) transformed chlorophyll variance. However, summer zooplankton concentrations were not consistently related to satellite temperature patterns.

Thomas, A. C.↗
NASA NTRS1988

Crowned spur gears - Methods for generation and Tooth Contact Analysis. II - Generation of the pinion tooth surface by a surface of revolution

A method for generation of crowned pinion tooth surfaces using a surface of revolution is developed. The crowned pinion meshes with a regular involute gear and has a prescribed parabolic type of transmission errors when the gears operate in the aligned mode. When the gears are misaligned the transmission error remains parabolic with the maximum level still remaining very small (less than 0.34 arc second for the numerical examples). Tooth Contact Analysis (TCA) is used to simulate the conditions of meshing, determine the transmission error, and the bearing contact.

Litvin, F. L.↗
NASA NTRS1991

Theoretical characterization of the potential energy surface for the reversible reaction H + O2 yields HO2(asterisk) yields OH + O. III - Computed points to define a global potential energy surface

Computed energies and geometries are reported which, combined with previously published calculations, permit a global representation of the potential energy surface for the reaction H + O2 yields HO2(asterisk) yields OH + O. These new calculations characterize the potential energy surface (PES) for all H atom angles of approach to O2 and for the region of the inner repulsive wall. The region of the T-shaped H-O2 exchange saddle point is connected with the constrained energy minimum (CEM) path, and a new collinear H-O2 exchange saddle point is characterized which lies only 9 kcal/mol above the H + O2 asymptote. A vibrational analysis which utilizes local cubic and quartic polynomial representations of the PES along the CEM path has been carried out. Optimal geometries, energies, and harmonic frequencies are reported along with anharmonic analyses for the O2 and OH asymptotes and for the HO2 minimum region of the PES.

Walch, Stephen P.↗
NASA NTRS1991

A new surface impedance function for the aperture surface of a conducting body with a dielectric-filled cavity

A surface impedance function (SIF) appropriate for use on the aperture surface of a conducting body with a dielectric-filled cavity, is presented. Unlike the usual SIFs that might be used on an aperture, this SIF takes into account not only the wave transmitted through the aperture but also the wave reflected from the inside of the cavity the shape of the aperture and cavity, and the polarization and direction of the incident wave. The SIF is derived heuristically from the series-reflection solution for a plane wave normally incident on an infinite flat conducting plate with a flat dielectric coating. The SIF was developed and used in a combined method of moments (MM) solution for the scattered fields due to an incident plane wave. This combined technique greatly reduces the number of current expansion coefficients to be determined using the method of moments and hence also reduces the number of impedance elements required for calculation in the method of moments. Application of the SIF in a combined method is illustrated for a two-dimensional object.

Goggans, Paul M.↗
NASA NTRS1990

Robotic lunar surface operations: Engineering analysis for the design, emplacement, checkout and performance of robotic lunar surface systems

The assembly, emplacement, checkout, operation, and maintenance of equipment on planetary surfaces are all part of expanding human presence out into the solar system. A single point design, a reference scenario, is presented for lunar base operations. An initial base, barely more than an output, which starts from nothing but then quickly grows to sustain people and produce rocket propellant. The study blended three efforts: conceptual design of all required surface systems; assessments of contemporary developments in robotics; and quantitative analyses of machine and human tasks, delivery and work schedules, and equipment reliability. What emerged was a new, integrated understanding of hot to make a lunar base happen. The overall goal of the concept developed was to maximize return, while minimizing cost and risk. The base concept uses solar power. Its primary industry is the production of liquid oxygen for propellant, which it extracts from native lunar regolith. Production supports four lander flights per year, and shuts down during the lunar nighttime while maintenance is performed.

Woodcock, Gordon R.↗
NASA NTRS1990

Comparison of Surface Radiation Budget Satellite algorithms for downwelled shortwave irradiance with Wisconsin Fire/SRB surface-truth data

Surface radiation instruments were operated at various locations during the Wisconsin First ISSCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) and Surface Radiation Budget (SRB) experiment in October 1986. Satellite data were distributed to scientists who had previously developed satellite algorithms to estimate downwelled shortwave irradiance. Results of intercomparison of ground-truth values with the satellite-derived estimates are described.

Whitlock, C. H.↗
NASA NTRS1993

Thermal-infrared emission spectroscopy of natural surfaces: Application to coated surfaces

Thermal-infrared vibrational spectroscopy has great potential for remotely determining the composition of planetary surface materials by taking advantage of fundamental molecular vibrational modes that produce spectral features in the range from approximately 3 to greater than 50 microns. Much of the current interest in the thermal infrared wavelength region stems from the deployment of multispectral scanners, such as the Thermal Infrared Multispectral Scanner (TIMS) and the Mars Observer Thermal Emission Spectrometer (TES). In order to support these missions, it is necessary to develop an appropriate library of laboratory measurements. The purpose of this work was to develop a technique which, with a very limited set of assumptions, can be used to determine the emissivity of natural surfaces directly by using emitted energy.

Christensen, Philip R.↗
NASA NTRS1994

Experimental measurements and analytical analysis related to gas turbine heat transfer. Part 1: Time-averaged heat-flux and surface-pressure measurements on the vanes and blades of the SSME fuel-side turbine and comparison with prediction. Part 2: Phase-resolved surface-pressure and heat-flux measurements on the first blade of the SSME fuel-side turbine

Time averaged Stanton number and surface-pressure distributions are reported for the first-stage vane row, the first stage blade row, and the second stage vane row of the Rocketdyne Space Shuttle Main Engine two-stage fuel-side turbine. Unsteady pressure envelope measurements for the first blade are also reported. These measurements were made at 10 percent, 50 percent, and 90 percent span on both the pressure and suction surfaces of the first stage components. Additional Stanton number measurements were made on the first stage blade platform blade tip, and shroud, and at 50 percent span on the second vane. A shock tube was used as a short duration source of heated and pressurized air to which the turbine was subjected. Platinum thin-film heat flux gages were used to obtain the heat flux measurements, while miniature silicon-diaphragm flush-mounted pressure transducers were used to obtain the pressure measurements. The first stage vane Stanton number distributions are compared with predictions obtained using a version of STAN5 and a quasi-3D Navier-Stokes solution. This same quasi-3D N-S code was also used to obtain predictions for the first blade and the second vane.

Source record↗
NASA NTRS1994

Modelling of Surfaces. Part 1: Monatomic Metallic Surfaces Using Equivalent Crystal Theory

We present a detailed description of equivalent crystal theory focusing on its application to the study of surface structure. While the emphasis is in the structure of the algorithm and its computational aspects, we also present a comprehensive discussion on the calculation of surface energies of metallic systems with equivalent crystal theory and other approaches. Our results are compared to experiment and other semiempirical as well as first-principles calculations for a variety of fcc and bcc metals.

Bozzolo, Guillermo↗