Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STANDING WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Phase-operation for conduction electron by atomic-scale scattering via single point-defect

In order to propose a phase-operation technique for conduction electrons in solid, we have investigated, using scanning tunneling microscopy, an atomic-scale electron-scattering phenomenon on a 2D subband state formed in Si. Particularly, we have noticed a single surface point-defect around which a standing-wave pattern created, and a dispersion of scattering phase-shifts by the defect-potential against electron-energy has been measured. The behavior is well-explained with appropriate scattering parameters: the potential height and radius. This result experimentally proves that the atomic-scale potential scattering via the point defect enables phase-operation for conduction electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase locked multiple rings in the radiation pressure ion acceleration process

Laser contrast plays a crucial role for obtaining high quality ion beams in the radiation pressure ion acceleration (RPA) process. Through one- and two-dimensional particle-in-cell (PIC) simulations, we show that a plasma with a bi-peak density profile can be produced from a thin foil on the effects of a picosecond prepulse, and it can then lead to distinctive modulations in the ion phase space (phase locked double rings) when the main pulse interacts with the target. These fascinating ion dynamics are mainly due to the trapping effect from the ponderomotive potential well of a formed moving standing wave (i.e. the interference between the incoming pulse and the pulse reflected by a slowly moving surface) at nodes, quite different from the standard RPA process. Here, a theoretical model is derived to explain the underlying mechanism, and good agreements have been achieved with PIC simulations.

43 PARTICLE ACCELERATORS↗

Mechanism of generating fast electrons by an intense laser at a steep overdense interface

The acceleration and heating of electrons by an intense laser normally incident on a steep overdense plasma interface is investigated using the particle-in-cell code osiris. Energetic electrons are generated by the laser's electric field in the vacuum region within {lambda}/4 of the surface. Only those electrons which originate within the plasma with a sufficiently large transverse momentum can escape the plasma. This mechanism relies on the standing wave structure created by the incoming and reflected wave and is therefore very different for linear and circularly polarized light.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sub-20 nm island self-organisation stimulated by spatially periodic laser exposure in the GaAs/InGaAs/GaAs epitaxial system

Four-beam laser interference is shown to stimulate the self-organisation of periodic two-dimensional arrays of nanoislands on the surface of GaAs/InGaAs/GaAs epitaxial structures. (Self-organisation is here taken to mean processes that determine the island size.) The island size distribution has two well-defined maxima. The smaller islands ({approx}5 nm) form inside each heat-affected zone, and the larger islands ({approx}15 nm), at the periphery of such zones. The island width is a factor of 20 - 60 smaller than the standing wave period, which can be accounted for in terms of the elastic stress on the surface of the epitaxial film. (nanostructures)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suspension of Atoms Using Optical Pulses, and Application to Gravimetry

Atoms from a {sup 87}Rb condensate are suspended against gravity using repeated reflections from a pulsed optical standing wave. Up to 100 reflections are observed, yielding suspension times of over 100 ms. The local gravitational acceleration can be determined from the pulse rate required to achieve suspension. Further, a gravitationally sensitive atom interferometer was implemented using the suspended atoms. This technique could potentially provide a precision measurement of gravity without requiring the atoms to fall a large distance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generating single-mode behavior in fiber-coupled optical cavities

We propose to turn two resonant distant cavities effectively into one by coupling them via an optical fiber which is coated with two-level atoms [J. D. Franson et al., Phys. Rev. A 70, 062302 (2004)]. The purpose of the atoms is to destructively measure the evanescent electric field of the fiber on a time scale which is long compared to the time it takes a photon to travel from one cavity to the other. Moreover, the boundary conditions imposed by the setup should support a small range of standing waves inside the fiber, including one at the frequency of the cavities. In this way, the fiber provides an additional decay channel for one common cavity field mode but not for the other. If the corresponding decay rate is sufficiently large, this mode decouples effectively from the system dynamics. A single nonlocal resonator mode is created.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of electron-electron interaction induced dephasing on electronic transport in graphene nanoribbons

The effect of dephasing induced by electron-electron interaction on electronic transport in graphene nanoribbons is theoretically investigated. In the presence of disorder in graphene nanoribbons, wavefunction of electrons can set up standing waves along the channel and the conductance exponentially decreases with the ribbon's length. Employing the non-equilibrium Green's function formalism along with an accurate model for describing the dephasing induced by electron-electron interaction, we show that this kind of interaction prevents localization and transport of electrons remains in the diffusive regime where the conductance is inversely proportional to the ribbon's length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of the Langmuir–Schaefer method for fabrication of ordered protein films

A modification of the Langmuir–Schaefer method for the fabrication of high-quality protein films on a solid substrate was proposed and applied to lysozyme. The procedure relies on the use of a pre-prepared protein solution, the parameters of which correspond to crystallization conditions. A lysozyme Langmuir monolayer was shown to be formed with the involvement of complexes, namely, dimers and octamers of protein molecules that are present in such protein solutions. These complexes apparently retain the structure after spreading a protein solution onto an aqueous subphase in a Langmuir trough. The thickness of the film after the transfer of the monolayer, which was formed by the proposed procedure, onto a solid substrate corresponds to the diameter of the octamer and this film is dense, continuous, and uniform, as was demonstrated by several methods: X-ray reflectivity, total external reflection X-ray standing wave, and atomic force microscopy. A layer of chloride ions that formed under the Langmuir monolayer was found at the air–protein film interface. This fact confirms an important role of the precipitating agent (chloride ions) in all steps of the formation of lysozyme films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A proposal to generate entangled compass states with sub-Planck structure

We illustrate a procedure to generate a bipartite, entangled compass state, which shows sub-Planck structure. The proposed method uses the interaction of a standing wave laser field, with two, two-level atoms and relies on the ability of this system to choose certain mesoscopic bipartite states to couple with the internal degrees of freedom. An appropriate measurement on the internal degrees of freedom then leads to the entangled state, which shows sub-Planck structures, desired for quantum metrology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Angular splitting in half Kapitza-Dirac effect of H{sub 2}{sup +} molecules

The half Kapitza-Dirac effect following photoionization of molecules in intense standing-wave laser fields is studied. Photoelectron angular distributions (PADs) of molecules split towards the laser propagation and exhibit multiple splitting, which manifests the integer property of the ponderomotive parameter, as the laser intensity increases. The PADs are asymmetric about the laser polarization plane and vary with the molecular alignment as well as the kinetic energy of photoelectrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effects of interelectrode gap on high frequency and very high frequency capacitively coupled plasmas

Capacitively coupled plasma (CCP) discharges using high frequency (HF) and very high frequency (VHF) sources are widely used for dielectric etching in the semiconductor industry. A two-dimensional fluid plasma model is used to investigate the effects of interelectrode gap on plasma spatial characteristics of both HF and VHF CCPs. The plasma model includes the full set of Maxwell's equations in their potential formulation. The peak in plasma density is close to the electrode edge at 13.5 MHz for a small interelectrode gap. This is due to electric field enhancement at the electrode edge. As the gap is increased, the plasma produced at the electrode edge diffuses to the chamber center and the plasma becomes more uniform. At 180 MHz, where electromagnetic standing wave effects are strong, the plasma density peaks at the chamber center at large interelectrode gap. As the interelectrode gap is decreased, the electron density increases near the electrode edge due to inductive heating and electrostatic electron heating, which makes the plasma more uniform in the interelectrode region.

36 MATERIALS SCIENCE↗

Tailoring UV cure depth profiles for optimal mechanical properties of organosilicate thin films

The adhesive and cohesive properties of organosilicate thin films are remarkably insensitive to UV curing. We demonstrate how to maximize these properties with UV standing waves together with an optical spacer underlying layer. Using a simulation of the UV cure profile through the film thickness, we demonstrate how a UV transparent SiN optical spacer layer can be selected to maximize curing at both sides of the organosilicate film with marked increases in interfacial fracture energy. On the contrary, a UV absorbing SiCN underlying layer resulted in significantly reduced UV intensities and small improvements of the interfacial fracture energies.

36 MATERIALS SCIENCE↗

Atom lithography with metastable helium

A bright metastable helium (He*) beam is collimated sequentially with the bichromatic force and three optical molasses velocity compression stages. Each He* atom in the beam has 20 eV of internal energy that can destroy a molecular resist assembled on a gold coated silicon wafer. Patterns in the resist are imprinted onto the gold layer with a standard selective etch. Patterning of the wafer with the He{sup *} was demonstrated with two methods. First, a mesh was used to protect parts of the wafer making an array of grid lines. Second, a standing wave of {lambda}=1083 nm light was used to channel and focus the He* atoms into lines separated by {lambda}/2. The patterns were measured with an atomic force microscope establishing an edge resolution of 80 nm. Our results are reliable and repeatable.

36 MATERIALS SCIENCE↗

Non-linear mixing in coupled photonic crystal nanobeam cavities due to cross-coupling opto-mechanical mechanisms

We investigate the coupling between mechanical and optical modes supported by coupled, freestanding, photonic crystal nanobeam cavities. We show that localized cavity modes for a given gap between the nanobeams provide weak optomechanical coupling with out-of-plane mechanical modes. However, we show that the coupling can be significantly increased, more than an order of magnitude for the symmetric mechanical mode, due to optical resonances that arise from the interaction of the localized cavity modes with standing waves formed by the reflection from thesubstrate. Finally, amplification of motion for the symmetric mode has been observed and attributed to the strong optomechanical interaction of our hybrid system. The amplitude of these self-sustained oscillations is large enough to put the system into a non-linear oscillation regime where a mixing between the mechanical modes is experimentally observed and theoretically explained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

OBSERVATIONS OF MAGNETIC FLUX-ROPE OSCILLATION DURING THE PRECURSOR PHASE OF A SOLAR ERUPTION

Based on combined observations from the Interface Region Imaging Spectrograph (IRIS) spectrometer with the coronal emission line of Fe xxi at 1354.08 Å and SDO /AIA images in multiple passbands, we report the finding of the precursor activity manifested as the transverse oscillation of a sigmoid, which is likely a pre-existing magnetic flux rope (MFR), that led to the onset of an X class flare and a fast halo coronal mass ejection (CME) on 2014 September 10. The IRIS slit is situated at a fixed position that is almost vertical to the main axis of the sigmoid structure that has a length of about 1.8 × 10{sup 5} km. This precursor oscillation lasts for about 13 minutes in the MFR and has velocities in the range of [−9, 11] km s{sup −1} and a period of ∼280 s. Our analysis, which is based on the temperature, density, length, and magnetic field strength of the observed sigmoid, indicates that the nature of the oscillation is a standing wave of fast magnetoacoustic kink mode. We further find that the precursor oscillation is excited by the energy released through an external magnetic reconnection between the unstable MFR and the ambient magnetic field. It is proposed that this precursor activity leads to the dynamic formation of a current sheet underneath the MFR that subsequently reconnects to trigger the onset of the main phase of the flare and the CME.

79 ASTRONOMY AND ASTROPHYSICS↗

Electromagnetically induced grating via enhanced nonlinear modulation by spontaneously generated coherence

By investigating the third-order nonlinearity of a four-level ladder-type atomic system, it is found that, with spontaneously generated coherence (SGC) present, the nonlinear absorption or refraction can be significantly enhanced with vanishing linear absorption. We attribute the enhancement of nonlinearity mainly to quantum interference in the two decay pathways from the two upper closely lying levels. With a standing-wave trigger field, absorption or phase grating, which effectively diffracts a weak probe into high-order direction, can be induced by the SGC-enhanced absorptive or refractive nonlinear modulation. In contrast to the schemes for enhancing nonlinearity, no additional coupling field is required. Moreover, the present gratings result from the nonlinear modulation, which differs from the recent investigations based on linear modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Technological Issues and High Gradient Test Results on X-Band Molybdenum Accelerating Structures

Two 11.424 GHz single cell standing wave accelerating structures have been fabricated for high gradient RF breakdown studies. Both are brazed structures: one made from copper and the other from sintered molybdenum bulk. The tests results are presented and compared to those of similar devices constructed at SLAC (Stanford Linear Accelerator Center) and KEK (Ko Enerugi Kasokuki Kenkyu Kiko). The technological issues to build both sections are discussed.

43 PARTICLE ACCELERATORS↗

Advanced X-Band Test Accelerator for High Brightness Electron and Gamma Ray Beams

In support of Compton scattering gamma-ray source efforts at LLNL, a multi-bunch test stand is being developed to investigate accelerator optimization for future upgrades. This test stand will enable work to explore the science and technology paths required to boost the current 10 Hz monoenergetic gamma-ray (MEGa-Ray) technology to an effective repetition rate exceeding 1 kHz, potentially increasing the average gamma-ray brightness by two orders of magnitude. Multiple bunches must be of exceedingly high quality to produce narrow-bandwidth gamma-rays. Modeling efforts will be presented, along with plans for a multi-bunch test stand at LLNL. The test stand will consist of a 5.5 cell X-band rf photoinjector, single accelerator section, and beam diagnostics. The photoinjector will be a high gradient standing wave structure, featuring a dual feed racetrack coupler. The accelerator will increase the electron energy so that the emittance can be measured using quadrupole scanning techniques. Multi-bunch diagnostics will be developed so that the beam quality can be measured and compared with theory. Design will be presented with modeling simulations, and layout plans.

43 PARTICLE ACCELERATORS↗