Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATELLITE DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Estimating global and North American methane emissions with high spatial resolution using GOSAT satellite data

We use 2009–2011 space-borne methane observations from the Greenhouse Gases Observing SATellite (GOSAT) to estimate global and North American methane emissions with 4° × 5° and up to 50 km × 50 km spatial resolution, respectively. GEOS-Chem and GOSAT data are first evaluated with atmospheric methane observations from surface and tower networks (NOAA/ESRL, TCCON) and aircraft (NOAA/ESRL, HIPPO), using the GEOS-Chem chemical transport model as a platform to facilitate comparison of GOSAT with in situ data. This identifies a high-latitude bias between the GOSAT data and GEOS-Chem that we correct via quadratic regression. Our global adjoint-based inversion yields a total methane source of 539 Tg a −1 with some important regional corrections to the EDGARv4.2 inventory used as a prior. Results serve as dynamic boundary conditions for an analytical inversion of North American methane emissions using radial basis functions to achieve high resolution of large sources and provide error characterization. We infer a US anthropogenic methane source of 40.2–42.7 Tg a −1 , as compared to 24.9–27.0 Tg a −1 in the EDGAR and EPA bottom-up inventories, and 30.0–44.5 Tg a −1 in recent inverse studies. Our estimate is supported by independent surface and aircraft data and by previous inverse studies for California. We find that the emissions are highest in the southern–central US, the Central Valley of California, and Florida wetlands; large isolated point sources such as the US Four Corners also contribute. Using prior information on source locations, we attribute 29–44 % of US anthropogenic methane emissions to livestock, 22–31 % to oil/gas, 20 % to landfills/wastewater, and 11–15 % to coal. Wetlands contribute an additional 9.0–10.1 Tg a −1 .

54 ENVIRONMENTAL SCIENCES↗

Matching high resolution satellite data and flux tower footprints improves their agreement in photosynthesis estimates

Mapping canopy photosynthesis in both high spatial and temporal resolution is essential for carbon cycle monitoring in heterogeneous areas. However, well established satellites in sun-synchronous orbits such as Sentinel-2, Landsat and MODIS can only provide either high spatial or high temporal resolution but not both. Recently established CubeSat satellite constellations have created an opportunity to overcome this resolution trade-off. In particular, Planet Fusion allows full utilization of the CubeSat data resolution and coverage while maintaining high radiometric quality. In this study, we used the Planet Fusion surface reflectance product to calculate daily, 3-m resolution, gap-free maps of the near-infrared radiation reflected from vegetation (NIRvP). We then evaluated the performance of these NIRvP maps for estimating canopy photosynthesis by comparing with data from a flux tower network in Sacramento-San Joaquin Delta, California, USA. Overall, NIRvP maps captured temporal variations in canopy photosynthesis of individual sites, despite changes in water extent in the wetlands and frequent mowing in the crop fields. When combining data from all sites, however, we found that robust agreement between NIRvP maps and canopy photosynthesis could only be achieved when matching NIRvP maps to the flux tower footprints. In this case of matched footprints, NIRvP maps showed considerably better performance than in situ NIRvP in estimating canopy photosynthesis both for daily sum and data around the time of satellite overpass (R2 = 0.78 vs. 0.60, for maps vs. in situ for the satellite overpass time case). This difference in performance was mostly due to the higher degree of consistency in slopes of NIRvP-canopy photosynthesis relationships across the study sites for flux tower footprint-matched maps. Our results show the importance of matching satellite observations to the flux tower footprint and demonstrate the potential of CubeSat constellation imagery to monitor canopy photosynthesis remotely at high spatio-temporal resolution.

54 ENVIRONMENTAL SCIENCES↗

Altitude Distribution of the Auroral Acceleration Potential Determined from Cluster Satellite Data at Different Heights

Aurora, commonly seen in the polar sky, is a ubiquitous phenomenon occurring on Earth and other solar system planets. The colorful emissions are caused by electron beams hitting the upper atmosphere, after being accelerated by quasistatic electric fields at 1-2 R{sub E} altitudes, or by wave electric fields. Although aurora was studied by many past satellite missions, Cluster is the first to explore the auroral acceleration region with multiprobes. Here, Cluster data are used to determine the acceleration potential above the aurora and to address its stability in space and time. The derived potential comprises two upper, broad U-shaped potentials and a narrower S-shaped potential below, and is stable on a 5 min time scale. The scale size of the electric field relative to that of the current is shown to depend strongly on altitude within the acceleration region. To reveal these features was possible only by combining data from the two satellites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cumulus cloud properties derived using Landsat satellite data

Landsat Multispectral Scanner (MSS) digital data are used to remotely sense cumulus cloud properties such as cloud fraction and cloud reflectance, along with the distribution of cloud number and cloud fraction as a function of cloud size. The analysis is carried out for four cumulus fields covering regions approximately 150 km square. Results for these initial cloud fields indicate that: (1) the common intuitive model of clouds as nearly uniform reflecting surfaces is a poor representation of cumulus clouds, (2) the cumulus clouds were often multicelled, even for clouds as small as 1 km in diameter, (3) cloud fractional coverage derived using a simple reflectance threshold is sensitive to the chosen threshold even for 57-meter resolution Landsat data, (4) the sensitivity of cloud fraction to changes in satellite sensor resolution is less sensitive than suggested theoretically, and (5) the Landsat derived cloud size distributions show encouraging similarities among the cloud fields examined.

Wielicki, B. A.↗

Monitoring land surface change over semi-arid regions using multispectral satellite data

Visible reflectance and surface temperature are derived from observations by the AVHRR on the NOAA-7 and NOAA-9 satellites and microwave emission at 37-GHz by the SMMR on Nimbus-7 satellite over the Sahel and Sudan zones. The AVHRR data is for the period January 1982 to December 1986, while the SMMR data is for the period January 1979 to December 1986. Rainfall data show that both the Sahel and Sudan zones experienced a particularly severe drought during 1984, and thus the present analysis shows the patterns leading to and recovering from the 1984 drought. Interrelationships among these multispectral data and the ways these relationships change in response to drought are evaluated in relation to field observations and heat balance models.

Choudhury, B. J.↗

An evaluation of soundings, analyses and model forecasts derived from TIROS-N and NOAA-6 satellite data

TIROS-N and NOAA-6 temperature soundings over North America during three days in January 1980, and synoptic analyses and numerical-model forecasts derived from them, are compared with conventional data and analyses from NMC's limited-area fine-mesh model (LFM). The collocated sounding comparison revealed significant errors, especially near the surface and the tropopause. Satellite-derived thermal gradients were found to be weak, and thickness-analysis difference fields to propagate eastward, suggesting that sounding errors are correlated with synoptic patterns. The same pattern of anomalies is seen in the model forecasts. More detailed determinations of the correlation detected here could be used to optimize the assimilation of satellite soundings to conventional data.

Koehler, T. L.↗

Improvement of the Earth's gravity field from terrestrial and satellite data

The terrestrial gravity data base was updated. Studies related to the Geopotential Research Mission (GRM) have primarily considered the local recovery of gravity anomalies on the surface of the Earth based on satellite to satellite tracking or gradiometer data. A simulation study was used to estimate the accuracy of 1 degree-mean anomalies which could be recovered from the GRM data. Numerous procedures were developed for the intent of performing computations at the laser stations in the SL6 system to improve geoid undulation calculations.

Source record↗

Analysis of high resolution satellite data for cosmic gamma ray bursts

Cosmic gamma ray bursts detected a germanium spectrometer on the low altitude satellite 1972-076B were surveyed. Several bursts with durations ranging from approximately 0.032 to 15 seconds were found and are tabulated. The frequency of occurrence/intensity distribution of these events was compared with the S to the -3/2 power curve of confirmed events. The longer duration events fall above the S to the -3/2 power curve of confirmed events, suggesting they are perhaps not all true cosmic gamma-ray bursts. The narrow duration events fall closely on the S to the -3/2 power curve. The survey also revealed several counting rate spikes, with durations comparable to confirmed gamma-ray bursts, which were shown to be of magnetospheric origin. Confirmation that energetic electrons were responsible for these bursts was achieved from analysis of all data from the complete payload of gamma-ray and energetic particle detectors on board the satellite. The analyses also revealed that the narrowness of the spikes was primarily spatial rather than temporal in character.

Imhof, W. L.↗

Empirical global model of upper thermosphere winds based on atmosphere and dynamics explorer satellite data

Thermospheric wind data obtained from the Atmosphere Explorer E and Dynamics Explorer 2 satellites have been used to generate an empirical wind model for the upper thermosphere, analogous to the MSIS model for temperature and density, using a limited set of vector spherical harmonics. The model is limited to above approximately 220 km where the data coverage is best and wind variations with height are reduced by viscosity. The data base is not adequate to detect solar cycle (F10.7) effects at this time but does include magnetic activity effects. Mid- and low-latitude data are reproduced quite well by the model and compare favorably with published ground-based results. The polar vortices are present, but not to full detail.

Hedin, A. E.↗

Spectral Ratio Imaging with Hyperion Satellite Data for Geological Mapping

Since the advent of LANDSAT I in 1972, many different multispectral satellites have been orbited by the U.S. and other countries. These satellites have varied from 4 spectral bands in LANDSAT I to 14 spectral bands in the ASTER sensor aboard the TERRA space platform. Hyperion is a relatively new hyperspectral sensor with over 220 spectral bands. The huge increase in the number of spectral bands offers a substantial challenge to computers and analysts alike when it comes to the task of mapping features on the basis of chemical composition, especially if little or no ground truth is available beforehand from the area being mapped. One approach is the theoretical approach of the modeler, where all extraneous information (atmospheric attenuation, sensor electronic gain and offset, etc.) is subtracted off and divided out, and laboratory (or field) spectra of materials are used as training sets to map features in the scene of similar composition. This approach is very difficult to keep accurate because of variations in the atmosphere, solar illumination, and sensor electronic gain and offset that are not always perfectly recorded or accounted for. For instance, to apply laboratory or field spectra of materials as data sets from the theoretical approach, the header information of the files must reflect the correct, up-to-date sensor electronic gain and offset and the analyst must pick the exact atmospheric model that is appropriate for the day of data collection in order for classification procedures to accurately match pixels in the scene with the laboratory or field spectrum of a desired target on the basis of the hyperspectral data. The modeling process is so complex that it is difficult to tell when it is operating well or determine how to fix it when it is incorrect. Recently RSI has announced that the latest version of their ENVI software package is not performing atmospheric corrections correctly with the FLAASH atmospheric model. It took a long time to determine that it was wrong, and may take an equally long time (or longer) to fix.

Vincent, Robert K.↗

Surface Emissivity Derived From Multispectral Satellite Data

Surface emissivity is critical for remote sensing of surface skin temperature and infrared cloud properties when the observed radiance is influenced by the surface radiation. It is also necessary to correctly compute the longwave flux from a surface at a given skin temperature. Surface emissivity is difficult to determine because skin temperature is an ill-defined parameter. The surface-emitted radiation may arise from a range of surface depths depending on many factors including soil moisture, vegetation, surface porosity, and heat capacity. Emissivity can be measured in the laboratory for pure surfaces. Transfer of laboratory measurements to actual Earth surfaces, however, is fraught with uncertainties because of their complex nature. This paper describes a new empirical approach for estimating surface skin temperature from a combination of brightness temperatures measured at different infrared wavelengths with satellite imagers. The method uses data from the new Geostationary Operational Environmental Satellite (GOES) imager to determine multispectral emissivities from the skin temperatures derived over the ARM Southern Great Plains domain.

Minnis, P.↗

Area estimation of environmental phenomena from NOAA-n satellite data

A technique for documenting changes in size of NOAA-n pixels in order to calibrate the data for use in performing area calculations is described. Based on Earth-satellite geometry, a function for calculating the effective pixel size, measured in terms of ground area, on any given pixel was derived. The equation is an application of the law of sines plus an arclength formula. Effective pixel dimensions for NOAA 6 and 7 satellites for all pixels between nadir and the extreme view angles are presented. The NOAA 6 data were used to estimate the areas of several lakes, with an accuracy within 5%. Sources of error are discussed.

Tappan, G.↗

Surface vegetative biomass modelling from combined AVHRR and Landsat satellite data

A methodology for the estimation of regional biomass on the basis of Landsat and Polar Orbiter Satellite Advanced Very High Resolution Radiometer (AVHRR) imagery has been developed by the present study, which concentrated on the Sierra Nevada-Cascade Mountains ecological province of California. The Landsat data are only used initially, to calibrate the AVHRR-based biomass data. The essential element of the present approach is a 'pixel proportions' model. An integer block of Landsat pixels corresponds to each AVHRR pixel. The Landsat pixels are converted into biomass pixels using species biomass expression equations available in the literature.

Logan, T. L.↗

Oceanic upper mixed layer depth determination by the use of satellite data

A method has been developed to determine the oceanic daily mean mixed layer depth from satellite observations and a mixed layer thermal inertia (MLTI) model. The algorithms were developed to use remotely-sensed values of sea surface temperature, albedo, and surface wind speeds to calculate the thermal inertia and to predict changes in subsurface diurnal mixed layer depth. The MLTI model, based on a mixed layer model of the upper ocean, has been used to simulate the diurnal mixing process and thermal inertia distribution in the Sargasso Sea around 34 deg N, 70 deg W. Sea surface temperature and albedo have been obtained from the NOAA7-AVHRR images. Surface wind speeds have been derived from the Scanning Multichannel Microwave Radiometer (SMMR) aboard Nimbus 7. Image processing was performed for images gathered between June and July 1982. The daily mean mixed layer depths predicted by the MLTI model agree well with data gathered at the LOTUS mooring located in the Sargasso Sea. This suggests that vertical mixing is the dominant physical process that controls the thermal inertia distribution in the midocean, far from major current systems, and that remote sensing is a promising tool to study such upper ocean processes.

Yan, Xiao-Hai↗

Geosynchronous Meteorological Satellite Data Seminar

A seminar was organized by NASA to acquaint the meteorological community with data now available, and data scheduled to be available in the future, from geosynchronous meteorological satellites. The twenty-four papers were presented in three half-day sessions in addition to tours of the Image Display and LANDSAT Processing Facilities during the afternoon of the second day.

Source record↗

Numerical prediction experiments simulating the impact of mesoscale satellite data

Recent developments in mesometeorology are summarized to place this research in perspective. Recent advances in computer analysis and forecast system development that provide the basis for the simulation tests are discussed. The impact of NIMBUS-6 humidity data on analyses off the West Coast are shown and incorporation of geopotential gradient data is discussed. Experiments to demonstrate the feasibility of incorporating satellite-derived wind fields in mesoscale severe storm models are mentioned briefly.

Kreitzberg, C. W.↗

A Global Poverty Map Derived from Satellite Data

A global poverty map has been produced at 30 arc sec resolution using a poverty index calculated by dividing population count (LandScan2004) by the brightness of satellite observed lighting (DMSP nighttimelights). Inputs to the LandScan product include satellite-derived landcover and topography, plus human settlement outlines derived from high-resolution imagery. The poverty estimates have been calibrated using national level poverty data from the World Development Indicators (WDI) 2006 edition. The total estimate of the numbers of individuals living in poverty is 2.2billion, slightly under the WDI estimate of 2.6 billion. We have demonstrated a new class of poverty map that should improve over time through the inclusion of new reference data for calibration of poverty estimates and as improvements are made in the satellite observation of human activities related to economic activity and technology access.

58 GEOSCIENCES↗