Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiation Environment Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Radiative Effect of Springtime Biomass-Burning Aerosols over Northern Indochina During 7-SEAS Baseline 2013 Campaign

The direct aerosol radiative effects of biomass-burning (BB) aerosols over northern Indochina were estimated by using aerosol properties (physical, chemical, and optical) along with the vertical profile measurements from ground-based measurements with integration of an optical and a radiative transfer model during the Seven South East Asian Studies Biomass-Burning Aerosols Stratocumulus Environment: Lifecycles Interactions Experiment (7-SEASBASELInE) conducted in spring 2013. Cluster analysis of backward trajectories showed the air masses arriving at mountainous background site (Doi Ang Khang; 19.93degN, 99.05degE, 1536 m above mean sea level) in northern Indochina, mainly from near-source inland BB activities and being confined in the planetary boundary layer. The PM(sub10) and black carbon (BC)mass were 87 +/- 28 and 7 +/- 2 micrograms m(exp -3), respectively. The aerosol optical depth (AOD (sub 500) was found to be 0.26--1.13 (0.71 +/- 0.24). Finer (fine mode fraction is approximately or equal to 0.95, angstrom-exponent at 440-870 nm is approximately or equal to 1.77) and significantly absorbing aerosols(single scattering albedo is approximately or equal to 0.89, asymmetry-parameter is approximately or equal to 0.67, and absorption AOD 0.1 at 440 nm) dominated over this region. BB aerosols (water soluble and BC) were the main contributor to the aerosol radiative forcing (ARF), while others (water insoluble, sea salt and mineral dust) were negligible mainly due to their low extinction efficiency. BC contributed only 6 to the surface aerosol mass but its contribution to AOD was 12 (2 times higher). The overall mean ARF was 8.0 and -31.4 W m(exp -2) at top-of-atmosphere (TOA) and at the surface (SFC), respectively. Likely, ARF due to BC was +10.7 and -18.1 W m(exp -2) at TOA and SFC, respectively. BC imposed the heating rate of +1.4 K d(exp -1) within the atmosphere and highlighting its pivotal role in modifying the radiation budget. We propose that to upgrade our knowledge on BB aerosol radiative effects in BB source region, the long-term and extensive field measurements are needed.

aerosol optical properties↗
NASA NTRS1972

A modular approach for assessing the effect of radiation environments on man in operational systems. The radiobiological vulnerability of man during task performance

A modular approach for assessing the affects of radiation environments on man in operational systems has been developed. The feasibility of the model has been proved and the practicality has been assessed. It has been applied to one operational system to date and information obtained has been submitted to systems analysts and mission planners for the assessment of man's vulnerability and impact on systems survivability. In addition, the model has been developed so that the radiobiological data can be input to a sophisticated man-machine interface model to properly relate the radiobiological stress with other mission stresses including the effects of a degraded system.

Ewing, D. E.↗
NASA NTRS1974

A model of the trapped electron population for solar minimum

A model is presented of the trapped electron environment of solar minimum conditions. Solar maximum models have been presented for the inner radiation zone (AE-5 1967), and for the outer radiation zone (AE-4 1967). The present solar minimum model consists of an inner zone model (AE-5 1975 Projected) with an epoch of 1975, and an outer zone model with an epoch of 1964. With only minor modifications this latter model is identical to the AE-4 1964 model presented previous. The model, however, has not previously been issued in computer form. AE-4 1964 is based upon satellite data, while the inner zone solar minimum model AE-5 1975 Projected consists entirely of extrapolations from AE-5 1967. While the two components of the solar minimum model have epochs 11 years part, it is assumed that any differences between the successive solar minima are smaller than the model error, and the complete model is associated with an epoch of 1975.

Teague, M. J.↗
NASA NTRS1987

Spacecraft external heating variations in orbit

The results of an evaluation of variations in on-orbit external heating of spacecraft surfaces are presented. The analyzed time-varying components are the direct solar, the latitude-dependent shortwave reflected, and the latitude-dependent longwave planetary-emitted radiation. Differences in instantaneous heating rates at a given latitude among the different model environments are found to be much larger than are differences in orbital mean heating rates. The discrepancies are found to increase with the orbit inclination angle. The ratio of Northern Hemisphere winter-to-summer orbital mean heating rates for a nadir-facing node is near unity and shows only a slight dependence on large variations in node absorptance. Mean orbital albedo and emission values for low-inclination orbits are found to differ significantly from global values obtained in meteorological studies. Algorithms relating mean orbital albedos and emissions to orbit inclination are developed. The relative importance of more realistic nondiffuse over diffuse reflections is evaluated for spacecraft heating and found to be negligible. The sun-spacecraft-earth angular configuration is such that, for reception of the peak intensities in the nondiffuse reflectance angular distribution, the albedo heating rate is more than adequately suppressed by an extremely small view factor from the spacecraft to the sunlit 'crescent' earth.

Leffler, J. M.↗
NASA NTRS2004

Space Radiation Hazards and Countermeasures: 1990-2004

Contents include the folowing: radiation environments, tools and techniques for measuring radiation dosage, effects of radiation on humans and animal models, methods for strengthening biological resistance to radiation, and radiation shielding.

Source record↗
NASA NTRS2008

Capabilities and Limitations of Space-Borne Passive Remote Sensing of Dust

Atmospheric dust particles have significant effects on the climate and the environment and despite notable recent advances in modeling and observation, wind-blown dust radiative effects remain poorly quantified in both magnitude and sign [IPCC, 2001]. To address this issue, many scientists are using passive satellite observations to study dust properties and to constrain emission/transport models, because the information provided is both time-resolved and global in coverage. In order to assess the effects of individual dust outbreaks on atmospheric radiation and circulation, relatively high temporal resolution (of the order of hours or days) is required in the observational data. Data should also be available over large geographical areas, as dust clouds may cover hundreds of thousands of square kilometers and will exhibit significant spatial variation in their vertical structure, composition and optical properties, both between and within dust events. Spatial and temporal data continuity is necessary if the large-scale impact of dust loading on climate over periods ranging from hours to months is to be assessed.

Kalashnikova, Olga↗
NASA NTRS2011

A Deterministic Electron, Photon, Proton and Heavy Ion Radiation Transport Suite for the Study of the Jovian System

A deterministic suite of radiation transport codes, developed at NASA Langley Research Center (LaRC), which describe the transport of electrons, photons, protons, and heavy ions in condensed media is used to simulate exposures from spectral distributions typical of electrons, protons and carbon-oxygen-sulfur (C-O-S) trapped heavy ions in the Jovian radiation environment. The particle transport suite consists of a coupled electron and photon deterministic transport algorithm (CEPTRN) and a coupled light particle and heavy ion deterministic transport algorithm (HZETRN). The primary purpose for the development of the transport suite is to provide a means for the spacecraft design community to rapidly perform numerous repetitive calculations essential for electron, proton and heavy ion radiation exposure assessments in complex space structures. In this paper, the radiation environment of the Galilean satellite Europa is used as a representative boundary condition to show the capabilities of the transport suite. While the transport suite can directly access the output electron spectra of the Jovian environment as generated by the Jet Propulsion Laboratory (JPL) Galileo Interim Radiation Electron (GIRE) model of 2003; for the sake of relevance to the upcoming Europa Jupiter System Mission (EJSM), the 105 days at Europa mission fluence energy spectra provided by JPL is used to produce the corresponding dose-depth curve in silicon behind an aluminum shield of 100 mils ( 0.7 g/sq cm). The transport suite can also accept ray-traced thickness files from a computer-aided design (CAD) package and calculate the total ionizing dose (TID) at a specific target point. In that regard, using a low-fidelity CAD model of the Galileo probe, the transport suite was verified by comparing with Monte Carlo (MC) simulations for orbits JOI--J35 of the Galileo extended mission (1996-2001). For the upcoming EJSM mission with a potential launch date of 2020, the transport suite is used to compute the traditional aluminum-silicon dose-depth calculation as a standard shield-target combination output, as well as the shielding response of high charge (Z) shields such as tantalum (Ta). Finally, a shield optimization algorithm is used to guide the instrument designer with the choice of graded-Z shield analysis.

Norman, Ryan B.↗
NASA NTRS2012

Heat Pipes and Heat Rejection Component Testing at NASA Glenn Research Center

Titanium-water heat pipes are being evaluated for use in the heat rejection system for space fission power systems. The heat rejection syst em currently comprises heat pipes with a graphite saddle and a composite fin. The heat input is a pumped water loop from the cooling of the power conversion system. The National Aeronautics and Space Administration has been life testing titanium-water heat pipes as well as eval uating several heat pipe radiator designs. The testing includes thermal modeling and verification of model, material compatibility, frozen startup of heat pipe radiators, and simulating low-gravity environments. Future thermal testing of titanium-water heat pipes includes low-g ravity testing of thermosyphons, radiation testing of heat pipes and fin materials, water pump performance testing, as well as Small Busine ss Innovation Research funded deliverable prototype radiator panels.

Sanzi, James L.↗
NASA NTRS1995

Single Event Upset Effects on the Clementine Solid State Data Recorder

The sensitivity of the Clementine 2.1 Gbit Solid State Data Recorder (SSDR) to single event upsets was characterized in ground tests. Subsequent in-situ measurements of the ambient radiation environment by experiments on-board Clementine permitted evaluation of the ability of models of the single event phenomenon in the SSDR to be tested using actual data. Initial results from the analysis reveal a nearly constant background upset rate of ~71 bit flips/day for the SSDR. There is no obvious correlation with a solar proton event recorded by Clementine and several other spacecraft on 20-21 February 1994, indicating that the SSDR was not sensitive to protons. The constant rate is thus interpreted as being a function of the Galactic Cosmic Ray heavy ion environment. A pronounced lunar orbit altitude dependence has also been identified in the data though the cause has not yet been unambiguously identified.

Clementine↗
NASA NTRS1980

On the physical environment in the nucleus of Centaurus A /NGC 5128/

A model is proposed for the radio and X-ray variability of the nucleus of Centaurus A in which an adiabatically expanding plasma containing a power-law distribution of relativistic electrons produces the radio flux by synchrotron emission, and the X-ray flux by inverse Compton scattering of an ambient distribution of thermal photons. The variability of Centaurus A is shown to be consistent with the expansion of an initially opaque, hot (1000-10,000 K) plasma which eventually becomes optically thin. Radio flares without corresponding X-ray flares are possible in this model because the plasma density decreases during the expansion, allowing radio radiation previously absorbed or suppressed to be observed. Some consequences of the model for the physical environment in galactic nuclei are discussed.

Beall, J. H.↗
NASA NTRS2016

Assessment of the Influence of the RaD-X Balloon Payload on the Onboard Radiation Detectors

The NASA Radiation Dosimetry Experiment (RaD-X) stratospheric balloon flight mission, launched on 25 September 2015, provided dosimetric measurements above the Pfotzer maximum. The goal of taking these measurements is to improve aviation radiation models by providing a characterization of cosmic ray primaries, which are the source of radiation exposure at aviation altitudes. The RaD-X science payload consists of four instruments. The main science instrument is a tissue-equivalent proportional counter (TEPC). The other instruments consisted of three solid state silicon dosimeters: Liulin, Teledyne total ionizing dose (TID) and RaySure detectors. The instruments were housed in an aluminum structure protected by a foam cover. The structure partially shielded the detectors from cosmic rays but also created secondary particles, modifying the ambient radiation environment observed by the instruments. Therefore, it is necessary to account for the influence of the payload structure on the measured doses. In this paper, we present the results of modeling the effect of the balloon payload on the radiation detector measurements using a Geant-4 (GEometry ANd Tracking) application. Payload structure correction factors derived for the TEPC, Liulin, and TID instruments are provided as a function of altitude. Overall, the payload corrections are no more than a 7% effect on the radiation environment measurements.

Gronoff, Guilluame↗
NASA NTRS2015

InGaN High-Temperature Photovoltaic Cells

This Phase II project developed Indium-Gallium-Nitride (InGaN) photovoltaic cells for high-temperature and high-radiation environments. The project included theoretical and experimental refinement of device structures produced in Phase I as well as modeling and optimization of solar cell device processing. The devices have been tested under concentrated air mass zero (AM0) sunlight, at temperatures from 100 degC to 250 degC, and after exposure to ionizing radiation. The results are expected to further verify that InGaN can be used for high-temperature and high-radiation solar cells. The large commercial solar cell market could benefit from the hybridization of InGaN materials to existing solar cell technology, which would significantly increase cell efficiency without relying on highly toxic compounds. In addition, further development of this technology to even lower bandgap materials for space applications would extend lifetimes of satellite solar cell arrays due to increased radiation hardness. This could be of importance to the Departmentof Defense (DoD) and commercial satellite manufacturers.

Starikov, David↗
NASA NTRS2010

Freezable Radiator Model Correlation and Full Scale Design

Freezable radiators offer an attractive solution to the issue of thermal control system scalability. As thermal environments change, a freezable radiator will effectively scale the total heat rejection it is capable of as a function of the thermal environment and flow rate through the radiator. Scalable thermal control systems are a critical technology for spacecraft that will endure missions with widely varying thermal requirements. These changing requirements are a result of the space craft s surroundings and because of different thermal loads during different mission phases. However, freezing and thawing (recovering) a radiator is a process that has historically proven very difficult to predict through modeling, resulting in highly inaccurate predictions of recovery time. This paper summarizes efforts made to correlate a Thermal Desktop (TM) model with empirical testing data from two test articles. A 50-50 mixture of DowFrost HD and water is used as the working fluid. Efforts to scale this model to a full scale design, as well as efforts to characterize various thermal control fluids at low temperatures are also discussed.

Lillibridge, Sean T.↗
NASA NTRS2011

Freezable Radiator Model Correlation Improvements and Fluids Study

Freezable radiators offer an attractive solution to the issue of thermal control system scalability. As thermal environments change, a freezable radiator will effectively scale the total heat rejection it is capable of as a function of the thermal environment and flow rate through the radiator. Scalable thermal control systems are a critical technology for spacecraft that will endure missions with widely varying thermal requirements. These changing requirements are a result of the space craft s surroundings and because of different thermal rejection requirements during different mission phases. However, freezing and thawing (recovering) a radiator is a process that has historically proven very difficult to predict through modeling, resulting in highly inaccurate predictions of recovery time. To attempt to improve this, tests were conducted in 2009 to determine whether the behavior of a simple stagnating radiator could be predicted or emulated in a Thermal Desktop(trademark) numerical model. A 50-50 mixture of DowFrost HD and water was used as the working fluid. Efforts to scale this model to a full scale design, as well as efforts to characterize various thermal control fluids at low temperatures are also discussed. Previous testing and modeling efforts showed that freezable radiators could be operated as intended, and be fairly, if not perfectly predicted by numerical models. This paper documents the improvements made to the numerical model, and outcomes of fluid studies that were determined necessary to go forward with further radiator testing.

Lillibridge, Sean↗
NASA NTRS1994

Near-surface thermal gradients and their effects on mid-infrared emission spectra of planetary surfaces

We model the heat transfer by radiation and conduction in the top few millimeters of a planetary surface to determine the magnitude of near-surface (approximately 100 micrometers) thermal gradients and their effects on mid-infrared emission spectra for a number of planetary environments. The model is one-dimensional and uses a finite difference scheme for approximately 10 micrometers layers. Calculations are peformed for samples heated at the base and from above by sunlight. Our results indicate that near-surface radiative cooling creates significant thermal gradients in the top few hundred microns of surfaces in which radiation is an importamnt heat transfer mechanism. The effect is maximized in evacuated, underdense particulate media with sufficiently high temperatures. Near-surface thermal gradients will be significant in fine-grained particulate surfaces on the Moon (40-60 K/100 micrometers) and Mercury (approximately 80 K/100 micrometers), increasing spectral contrast and creating emission maxima in the transparent regions of the spectra. They will be of lesser importance on the surface of Mars, with a maximum value of around 5 k/100 micrometers in areas of low thermal inertia, and will be negligible on planets with more substantial atmospheres (less than 1 K/100 micrometers). We conclude that the effects that thermal gradients have on mid-IR emission spectra are predictable and do not negate the utility of emission spectroscopy for remote determination of planetary surface composition.

Henderson, B. G.↗
NASA NTRS2013

ARM Research in the Equatorial Western Pacific: A Decade and Counting

The tropical western Pacific (TWP) is an important climatic region. Strong solar heating, warm sea surface temperatures, and the annual progression of the intertropical convergence zone (ITCZ) across this region generate abundant convective systems, which through their effects on the heat and water budgets have a profound impact on global climate and precipitation. In order to accurately evaluate tropical cloud systems in models, measurements of tropical clouds, the environment in which they reside, and their impact on the radiation and water budgets are needed. Because of the remote location, ground-based datasets of cloud, atmosphere, and radiation properties from the TWP region have come primarily from short-term field experiments. While providing extremely useful information on physical processes, these short-term datasets are limited in statistical and climatological information. To provide longterm measurements of the surface radiation budget in the tropics and the atmospheric properties that affect it, the Atmospheric Radiation Measurement program established a measurement site on Manus Island, Papua New Guinea, in 1996 and on the island republic of Nauru in late 1998. These sites provide unique datasets now available for more than 10 years on Manus and Nauru. This article presents examples of the scientific use of these datasets including characterization of cloud properties, analysis of cloud radiative forcing, model studies of tropical clouds and processes, and validation of satellite algorithms. New instrumentation recently installed at the Manus site will provide expanded opportunities for tropical atmospheric science.

tropical regions↗