Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROLLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Marine Toxicity, Biodegradability, and Rolling-Sliding Tribological Performance of Ionic Liquid-Enhanced Environmentally-Acceptable Lubricants for Tidal Turbomachinery

Environmentally acceptable lubricants (EALs) are increasingly being recognized in many fields including waterpower, hydraulics, water transport, agricultural machinery, offshore wind turbines, etc. Specifically, high-performance EALs are demanded for tidal turbomachinery to ensure high efficiency and reliability and avoid the significant risk of direct contamination of the marine ecosystem upon leaks. Here we report a new development of ionic liquid (IL)-enhanced EALs for tidal energy. One short-chain phosphonium phosphate and one short-chain ammonium phosphate ILs were used as the candidate additives and the IL-containing EALs demonstrated significantly improved lubricating performance, much lower toxicity, and increased biodegradability compared with commercial baselines. Specifically, in a rolling-sliding test simulating the operation of a model tidal turbine gearbox bearing, an EAL containing the ILs at a 0.5 wt % concentration demonstrated 40% lower friction, 45% less wear loss, substantially reduced rolling contact fatigue-induced surface damage, and one order of magnitude lower vibration noise compared with a commercial gear oil. In an EPA standard toxicity test, 90 and 70% survival of marine biota was observed when exposed to an EAL containing 5 wt % of the short-chain phosphonium phosphate and ammonium phosphate ILs, respectively, while the selected commercial gear oil and bioderived additive killed all marine biota. In a standard biodegradability test, 2 wt % addition of the phosphonium phosphate IL not only retained the EAL’s ready biodegradability but further boosted the oil decomposition from a range of 60–80% to a higher level of 80–95%. Conversely, adding the commercial bioderived additive downgraded the EAL from readily to inherently biodegradable. Furthermore, this work offers scientific insights for development of ILs as potential EAL additives for marine energy and broader applications.

additives↗

Advantages of imperfect dice rolls over coin flips for random number generation

With an eye toward neural-inspired probabilistic computation, recent work has examined the development of true random number generators via stochastic devices. Typically, these devices are operated in a two-state regime to produce a sequence of binary outcomes (i.e., coin flips). However, there is no guarantee that stochastic devices will infallibly produce fair outputs and small deviations from a uniform distribution may have unwanted complications in applications. Using mathematical analysis, we contend that opting instead for a multi-state device (i.e., a dice roll) has benefits in these unfair paradigms. To demonstrate these benefits, we apply this framework to the analysis of a tunnel diode operated in a stochastic regime. In particular, interpreting the binary stochastic output of the tunnel diode as a multi-state die roll output also sees advantages in remaining closer to uniform. Overall, our approach provides a compelling argument for mathematical driven co-design and development of novel probabilistic computing devices and hardware.

applied mathematics↗

Stochastic Optimization with Risk Aversion for Virtual Power Plant Operations: A Rolling Horizon Control

While the concept of aggregating and controlling renewable distributed energy resources (DERs) to provide grid services is not new, increasing policy support of DER market participation has driven research and development in algorithms to pool DERs for economically viable market participation. Sandia National Laboratories recently undertook a three-year research program to create the components of a real-world virtual power plant (VPP) that can simultaneously participate in multiple markets. Our research extends current state-of-the-art rolling horizon control through the application of stochastic programming with risk aversion at various time resolutions. Our rolling horizon control consists of (1) day-ahead optimization to produce an hourly aggregate schedule for the VPP operator and (2) sub-hourly optimization for real-time dispatch of each VPP subresource. Both optimization routines leverage a two-stage stochastic program (SP) with risk aversion, and integrate the most up-to-date forecasts to generate probabilistic scenarios in real operating time. Our results demonstrate the benefits to the VPP operator of constructing a stochastic solution regardless of the weather. In more extreme weather, applying risk optimization strategies can dramatically increase the financial viability of the VPP. As a result, the methodologies presented here can be further tailored for optimal control of any VPP asset fleet and its operational requirements.

24 POWER TRANSMISSION AND DISTRIBUTION↗

STRUCTURE AND HIGH-FIELD PERFORMANCE OF JELLY ROLL PROCESSED Nb{sub 3}Sn WIRES USING Sn-Ta AND Sn-Ti BASED ALLOY SHEET

Sn-Ta based alloy buttons of different compositions were prepared by the melt diffusion process among constituent metal powders, and then pressed into plates. Meanwhile Sn-Ti based alloy plates were sliced from the melt and cast ingot. Resulting Sn-based alloy plates were rolled into thin sheets. The Sn-based alloy sheet was laminated with a Nb sheet, and wound into a Jelly Roll (JR) composite. The composite was encased in a sheath, and fabricated into a thin wire followed by the heat treatment. The application of hydrostatic extrusion is useful at the initial stage of the fabrication. The JR wires using Sn-Ta and Sn-Ti based alloy sheets show a non-Cu J{sub c} of {approx}250 A/mm{sup 2} and {approx}150 A/mm{sup 2} at 20 T and 22 T, respectively, at 4.2 K. It has been found that the Nb impregnates into the Sn-based alloy layers during the reaction, and Nb{sub 3}Sn layers are synthesized by the mutual diffusion between the Nb sheet and the Sn-based alloy sheet without formation of voids. Sn-Ti based alloy sheets are attractive due to their easiness of mass production. Structure and high-field performance of JR processed Nb{sub 3}Sn wires prepared from Sn-based alloy sheets with different compositions are compared in this article.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High efficiency and low roll-off blue phosphorescent organic light-emitting devices using mixed host architecture

We report high efficiency and low roll-off for blue electrophosphorescent organic light emitting devices (OLEDs) based on a mixed host layer architecture. The devices were fabricated using a mixed layer of di-[4-(N,N-ditolyl-amino)-phenyl]cyclohexane (TAPC), a hole transport material, and 2,8-bis(diphenylphosphoryl)dibenzothiophene (PO15), an electron transport material, as the host layer doped with the blue phosphor iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,C2’]picolinate (FIrpic). Using a mixed layer as the host allowed us to achieve high power efficiency (59 lm/W at 100 cd/m2), low turn-on voltage (2.7 V for >10 cd/m2), and low roll-off in these devices.

42 ENGINEERING↗

Application of MMC model on simulation of shearing process of thick hot-rolled high strength steel plate

Shear operation is widely used as the first step in sheet metal forming to cut the sheet or plate into the required size. The shear of thick hot-rolled High Strength Steel (HSS) requires large shearing force and the sheared edge quality is relatively poor because of the large thickness and high strength compared with the traditional low carbon steel. Bad sheared edge quality will easily lead to edge cracking during the post-forming process. This study investigates the shearing process of thick hot-rolled HSS plate metal, which is generally exploited as the beam of heavy trucks. The Modified Mohr-Coulomb fracture criterion (MMC) is employed in numerical simulation to calculate the initiation and propagation of cracks during the process evolution. Tensile specimens are designed to obtain various stress states in tension. Equivalent fracture strains are measured with Digital Image Correlation (DIC) equipment to constitute the fracture locus. Simulation of the tension test is carried out to check the fracture model. Then the MMC model is applied to the simulation of the shearing process, and the simulation results show that the MMC model predicts the ductile fracture successfully.

36 MATERIALS SCIENCE↗

The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS

To reduce weight and improve passenger safety there is an increased need in the automotive industry to use Ultra High Strength Steels (UHSS) for structural and crash components. However, the application of UHSS is restricted by their limited formability and the difficulty of forming them in conventional processes. An alternative method of manufacturing structural auto body parts from UHSS is the flexible roll forming process which can accommodate materials with high strength and limited ductility in the production of complex and weight-optimised components. However, one major concern in the flexible roll forming is web-warping, which is the height deviation of the profile web area. This paper investigates, using a numerical model, the effect on web-warping with respect to various forming methods. The results demonstrate that different forming methods lead to different amount of web-warping in terms of forming the product with identical geometry.

36 MATERIALS SCIENCE↗

Effect of roll hot press temperature on crystallite size of PVDF film

Fabrication PVDF films have been made using Hot Roll Press. Preparation of samples carried out for nine different temperatures. This condition is carried out to see the effect of Roll Hot Press temperature on the size of the crystallite of PVDF films. To obtain the diffraction pattern of sample characterization is performed using X-Ray Diffraction. Furthermore, from the diffraction pattern is obtained, the calculation to determine the crystallite size of the sample by using the Scherrer equation. From the experimental results and the calculation of crystallite sizes obtained for the samples with temperature 130 °C up to 170 °C respectively increased from 7.2 nm up to 20.54 nm. These results show that increasing temperatures will also increase the size of the crystallite of the sample. This happens because with the increasing temperature causes the higher the degree of crystallization of PVDF film sample is formed, so that the crystallite size also increases. This condition indicates that the specific volume or size of the crystals depends on the magnitude of the temperature as it has been studied by Nakagawa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using an ultra-thin non-doped orange emission layer to realize high efficiency white organic light-emitting diodes with low efficiency roll-off

By adopting an ultra-thin non-doped orange emission layer sandwiched between two blue emission layers, high efficiency white organic light-emitting diodes (WOLEDs) with reduced efficiency roll-off were fabricated. The optimized devices show a balanced white emission with Internationale de L'Eclairage of (0.41, 0.44) at the luminance of 1000 cd/m{sup 2}, and the maximum power efficiency, current efficiency (CE), and external quantum efficiency reach 63.2 lm/W, 59.3 cd/A, and 23.1%, which slightly shift to 53.4 lm/W, 57.1 cd/A, and 22.2% at 1000 cd/m{sup 2}, respectively, showing low efficiency roll-off. Detailed investigations on the recombination zone and the transient electroluminescence (EL) clearly reveal the EL processes of the ultra-thin non-doped orange emission layer in WOLEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An electrically injected rolled-up semiconductor tube laser

We have demonstrated electrically injected rolled-up semiconductor tube lasers, which are formed when a coherently strained InGaAs/InGaAsP quantum well heterostructure is selectively released from the underlying InP substrate. The device exhibits strong coherent emission in the wavelength range of ∼1.5 μm. A lasing threshold of ∼1.05 mA is measured for a rolled-up tube with a diameter of ∼5 μm and wall thickness of ∼140 nm at 80 K. The Purcell factor is estimated to be ∼4.3.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Shaded fraction and backtracking in single-axis trackers on rolling terrain

A generalized closed-form equation for the shaded collector fraction in solar arrays on rolling or undulating terrain is provided for single-axis tracking and fixed-tilt systems. The equation accounts for different rotation angles between the shaded and shading trackers, cross-axis slope between the two trackers, and offset between the collector plane and axis of rotation. The validity of the equation is demonstrated through comparison with numerical ray-tracing simulations and remaining minor sources of error are quantified. Additionally, a simple procedure to determine backtracking rotations for each row in an array installed on the rolling terrain (varying in the direction perpendicular to the tracker axes) is provided. The backtracking equation accounts for a desired shaded fraction (including complete shade avoidance) as well as an axis-collector offset. Test cases are provided to facilitate implementation of these equations.

14 SOLAR ENERGY↗

Electrical conductivity of multilayered Cu/Nb composites fabricated by accumulative roll bonding

The electrical conductivity of nanolayered copper/niobium composites fabricated using accumulative roll bonding was investigated as a function of layer thickness. Cu/Nb was used as a model system to evaluate the processing-structure–property relationship stemming from the accumulative roll bonding process. The physical properties were compared against samples of individual average layer heights ranging from 193 to 25 nm. The electrical resistivity was measured over a temperature range of ~3–300 K. Analysis on the role of interfaces on temperature dependence is conducted including the residual resistivity ratio and temperature coefficient of resistivity. It was found that electrical resistivity increases with decreasing layer height.

36 MATERIALS SCIENCE↗

Maxwell strata and symmetries in the problem of optimal rolling of a sphere over a plane

The problem of rolling of a sphere over a plane without slipping or twisting is considered. It is required to roll the sphere from one contact configuration into another one so that the curve traced by the contact point be of minimum length. Extremal trajectories in this problem were described by Arthur, Walsh and Jurdjevic. In this work, discrete and continuous symmetries of the problem are constructed and fixed points of the action of these symmetries in the inverse image and image of the exponential map are studied. This analysis is used to derive necessary conditions for optimality; namely, upper bounds on the cut time along the extremal trajectories. Bibliography: 21 titles.

97 MATHEMATICS AND COMPUTING↗

The optimal rolling of a sphere, with twisting but without slipping

The problem of a sphere rolling on the plane, with twisting but without slipping, is considered. It is required to roll the sphere from one configuration to another in such a way that the minimum of the action is attained. We obtain a complete parametrization of the extremal trajectories and analyse the natural symmetries of the Hamiltonian system of the Pontryagin maximum principle (rotations and reflections) and their fixed points. Based on the estimates obtained for the fixed points we prove upper estimates for the cut time, that is, the moment of time when an extremal trajectory loses optimality. We consider the problem of re-orienting the sphere in more detail; in particular, we find diffeomorphic domains in the pre-image and image of the exponential map which are used to construct the optimal synthesis. Bibliography: 15 titles.

97 MATHEMATICS AND COMPUTING↗

High-Rate Sputter Deposition of Ultrathick Boron Carbide Coatings on Rolling Spherical Substrates

Amorphous boron carbide (B 4 C) is a promising next-generation ablator material for inertial confinement fusion. However, the deposition of ultrathick B4C coatings with submicron-scale density uniformity on spherical substrates, as required for ablator shell fabrication, remains challenging. Here, in this study, we use direct current magnetron sputtering to deposit B 4 C onto 2-mm-diameter Si spheres rolling in a dish-shaped substrate holder. High deposition rates of ∼3 μm/h are achieved. Ultrathick films have a columnar microstructure, with the column width determined by the density of nodular defects. Nodular defect nucleation is dominated by the pickup of particulates from the holder during substrate rolling. We demonstrate the fabrication of a hollow B 4 C spherical shell with a wall thickness of 80 μm. Also demonstrated is the laser machining of holes in the B 4 C coating, which is necessary for both the chemical removal of the Si template and the attachment of a fusion fuel fill tube.

Inertial confinement fusion targets↗

Stochastic inflation revisited: non-slow-roll statistics and DBI inflation

Stochastic inflation describes the global structure of the inflationary universe by modeling the super-Hubble dynamics as a system of matter fields coupled to gravity where the sub-Hubble field fluctuations induce a stochastic force into the equations of motion. The super-Hubble dynamics are ultralocal, allowing us to neglect spatial derivatives and treat each Hubble patch as a separate universe. This provides a natural framework in which to discuss probabilities on the space of solutions and initial conditions. In this paper we derive an evolution equation for this probability for an arbitrary class of matter systems, including DBI and k-inflationary models, and discover equilibrium solutions that satisfy detailed balance. Our results are more general than those derived assuming slow roll or a quasi-de Sitter geometry, and so are directly applicable to models that do not satisfy the usual slow-roll conditions. We discuss in general terms the conditions for eternal inflation to set in, and we give explicit numerical solutions of highly stochastic, quasi-stationary trajectories in the relativistic DBI regime. Finally, we show that the probability for stochastic/thermal tunneling can be significantly enhanced relative to the Hawking-Moss instanton result due to relativistic DBI effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scalar perturbations in conformal rolling scenario with intermediate stage

Scalar cosmological perturbations with nearly flat power spectrum may originate from perturbations of the phase of a scalar field conformally coupled to gravity and rolling down negative quartic potential. We consider a version of this scenario whose specific property is a long intermediate stage between the end of conformal rolling and horizon exit of the phase perturbations. Such a stage is natural, e.g., in cosmologies with ekpyrosis or genesis. Its existence results in small negative scalar tilt, statistical anisotropy of all even multipoles starting from quardupole of general structure (in contrast to the usually discussed single quadrupole of special type) and non-Gaussianity of a peculiar form.

79 ASTRONOMY AND ASTROPHYSICS↗