Characterizing the Performance, Power Efficiency, and Programmability of AMD Matrix Cores
Explore the source record for details and available documents.
Computer science↗
SEARCH · Engineering Papers
Results for “Programmable”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Beam-Based Programmable Spatial Shaper for Reducing Optics Exchange in the National Ignition Facility
Explore the source record for details and available documents.
Lasers↗
A Hybrid Analog-Digital Programmable Pulse Generator for QIST
Explore the source record for details and available documents.
47 OTHER INSTRUMENTATION↗
Initial report from the ICFA Neutrino Panel
The discovery of neutrino oscillations implies that neutrinos have mass and that the flavour eigenstates mix. Non-zero neutrino masses require new physics beyond the Standard Model. Revealing the physics behind neutrino masses and mixing is among the highest priorities for particle physics in the twenty-first century. Measurements of the parameters that govern neutrino oscillations will have a profound impact on our understanding of particle physics, astrophysics and cosmology. Such a breadth of impact justifies a far-reaching experimental programme by which the properties of the neutrino that are presently unknown are determined, the three-neutrino-mixing picture is tested and the properties of the neutrino are measured with a precision sufficient to allow the physics that explains these properties to be understood. Accelerator-based neutrino-oscillation experiments are an essential component of this programme as they are the only way in which oscillations between all known flavours can be studied precisely. The accelerator-based neutrino-oscillation programme is international in both scope and engagement. The approved programme will improve our knowledge of the mixing angles and the mass-squared differences and may be able to determine the neutrino mass hierarchy. In the medium term, the Long-baseline Neutrino Experiment (LBNE) and the Tokai (J-PARC) to Hyper-Kamiokande experiment offer complementary approaches to searching for the violation of the matter-anti-matter symmetry in neutrino oscillations. For these experiments to realise their full potential coordinated programmes of hadro-production and neutrino-nucleus cross-section measurements are essential. A design study of an alternative wide-hand beam facility is underway: the Long-baseline Neutrino Observatory (LBNO) study will report by the end of 2014. New concepts such as the implementation of a neutrino beam on the European Spallation Source (ESSnuSB) and the use of muon decay-at-rest to search for the matter-anti-matter asymmetry (Daedalus) are also being studied. The Neutrino Factory, in which electron- and muon-neutrino beams are produced from the decay of muons confined within a storage ring, has been shown to offer the ultimate sensitivity and precision. The staged implementation of the facility has been studied. The attractive hrst stage, “nuSTORM”, has the potential to make detailed and precise studies of electron- and muon-neutrino-nucleus scattering and to make exquisitely sensitive searches for sterile neutrinos. A small number of measurements do not fit the elegant three-neutrino-mixing model. These measurements can be interpreted as evidence for new “sterile neutrino” states. If confirmed, these measurements will revolutionise the held. An experimental programme is underway to investigate these anomalies. It is important that these anomalies are addressed. Short-baseline contributions to this programme should have clear synergy with the long-baseline programme. This report presents the conclusions drawn by the Panel from three regional “Town Meetings” that took place between November 2013 and February 2014. The Panel recognises that to maximise the discovery potential of the accelerator-based neutrino-oscillation programme it will be essential to exploit the infrastructures that exist at CERN, FNAL and J-PARC and the expertise and resources that reside in laboratories and institutes around the world.
Cao, J.↗
Overcoming the barriers to implementation of decommissioning and environmental remediation projects, the CIDER project - 15160
Much remains to be done in terms of addressing the legacies from the early development of nuclear energy, including the dismantling of redundant research and fuel cycle facilities, research reactors, and power plants, and the remediation of sites affected by past uranium mining and processing operations. Long-term solutions still need to be found for management of the resulting waste, including development of disposal facilities that meet public acceptance and safety requirements. Some countries are moving forward with dealing with these legacies, and accordingly have built up appropriate technical resources and expertise, but many national programmes still face very significant challenges. Many are the factors that constrain progress in addressing past legacies. It is recognized the importance of early implementation of decommissioning and environmental remediation (D and ER) programmes in order to safeguard people and the environment from the undesirable effects of ionizing radiation and other hazards associated with these sites. There is also an urgent need to better understand the global status of these activities and to establish mechanisms to analyze and report the barriers impeding the implementation of D and ER programmes, with the aim of outlining actions that may improve the current situation. The IAEA has thus launched the CIDER Project (Constraints to Implementing Decommissioning and Environmental Remediation) with the broad aim of contributing to improve current levels of performance on D and ER programmes through promoting greater cooperation amongst its Member States and relevant international organizations. This paper provides early results from the first phase of the project. During this phase, a survey on the global situation of D and ER was undertaken in order to better understand why these programmes proceed faster in some countries than in others; to identify major constraining factors that affect the implementation of D and ER programmes and how these impediments might be overcome. The paper aims to address policy-level issues, regulatory aspects, technological aspects, and stakeholder involvement in the decision-making process. In the next phase of the project it is intended that specific actions and/or innovative approaches will be proposed at international, regional, or national levels with the goal of facilitating progress in programme implementation. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
A novel digital pulse processing architecture for nuclear instrumentation
The field of nuclear instrumentation covers a wide range of applications, including counting, spectrometry, pulse shape discrimination and multi-channel coincidence. These applications are the topic of many researches, new algorithms and implementations are constantly proposed thanks to advances in digital signal processing. However, these improvements are not yet implemented in instrumentation devices. This is especially true for neutron-gamma discrimination applications which traditionally use charge comparison method while literature proposes other algorithms based on frequency domain or wavelet theory which show better performances. Another example is pileups which are generally rejected while pileup correction algorithms also exist. These processes are traditionally performed offline due to two issues. The first is the Poissonian characteristic of the signal, composed of random arrival pulses which requires to current architectures to work in data flow. The second is the real-time requirement, which implies losing pulses when the pulse rate is too high. Despite the possibility of treating the pulses independently from each other, current architectures paralyze the acquisition of the signal during the processing of a pulse. This loss is called dead-time. These two issues have led current architectures to use dedicated solutions based on re-configurable components like Field Programmable Gate Arrays (FPGAs) to overcome the need of performance necessary to deal with dead-time. However, dedicated hardware algorithm implementations on re-configurable technologies are complex and time-consuming. For all these reasons, a programmable Digital pulse Processing (DPP) architecture in a high level language such as Cor C++ which can reduce dead-time would be worthwhile for nuclear instrumentation. This would reduce prototyping and test duration by reducing the level of hardware expertise to implement new algorithms. However, today's programmable solutions do not meet the need of performance to operate online and not allow scaling with the increase in the number of measurement channel. That is why an innovative DPP architecture is proposed in this paper. This architecture is able to overcome dead-time while being programmable and is flexible with the number of measurement channel. Proposed architecture is based on an innovative execution model for pulse processing applications which can be summarized as follow. The signal is not composed of pulses only, consequently, pulses processing does not have to operate on the entire signal. Therefore, the first step of our proposal is pulse extraction by the use of dedicated components named pulse extractors. The triggering step can be achieved after the analog-to-digital conversion without any signal shaping or filtering stages. Pileup detection and accurate pulse time stamping are done at this stage. Any application downstream this step can work on adaptive variable-sized array of samples simplifying pulse processing methods. Then, once the data flow is broken, it is possible to distribute pulses on Functional Units (FUs) which perform processing. As the date of each pulse is known, they can be processed individually out-of-order to provide the results. To manage the pulses distribution, a scheduler and an interconnection network are used. pulses are distributed on the first FU which is not busy without congesting the interconnection network. For this reason, the process duration does not result anymore in dead-time if there are enough FUs. FUs are designed to be standalone and to comprises at least a programmable general purpose processor (ARM, Microblaze) allowing the implementation of complex algorithms without any modification of the hardware. An acquisition chain is composed of a succession of algorithms which lead to organize our FUs as a software macro-pipeline, A simple approach consists in assigning one algorithm per FU. Consequently, the global latency becomes the worst latency of algorithms execution on FU. Moreover, as algorithms are executed locally - i.e. on a FU - this approach limits shared memory requirement. To handle multichannel, we propose FUs sharing, this approach maximize the chance to find a non-busy FU to process an incoming pulse. This is possible since each channel receive random event independently, the pulse extractors associated to them do not necessarily need to access simultaneously to all Computing resources at the same time to distribute their pulses. The major contribution of this paper is the proposition of an execution model and its associated hardware programmable architecture for digital pulse processing that can handle multiple acquisition channels while maintaining the scalability thanks to the use of shared resources. This execution model and associated architecture are validated by simulation of a cycle accurate architecture SystemC model. Proposed architecture shows promising results in terms of scalability while maintaining zero dead-time. This work also permit the sizing of hardware resources requirement required for a predefined set of applications. Future work will focus on the interconnection network and a scheduling policy that can exploit the variable-length of pulses. Then, the hardware implementation of this architecture will be performed and tested for a representative set of application.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Costs and benefits of a school-based health intervention in Portugal
Abstract School-based programmes for preventing childhood obesity have been shown to be effective in improving eating habits and nutritional status, but few intervention programmes with a controlled design have included an economic evaluation. In this study, we conducted a cost-consequence analysis to evaluate the costs and the health benefits of the ‘Planning Health in School’ programme (PHS-pro) implemented in the Northern region of Portugal to 449 children of 10–14 years old. Previous study has showed that after PHS-pro, several anthropometric measures significantly improved in the intervention group (height, waist circumference and waist-height ratio) compared with the control group, followed by significant improvements on soft drinks, fruit and vegetables daily consumptions. Costs were estimated according the two phases of the programme: designing and preparation of schools, and school setting implementation, and included all the direct costs on human and material resources. PHS-pro total costs were estimated as 7915.53€/year with an intervention cost of 36.14€/year/child attending the programme. This is much lower than the direct costs for treating an obese adult in Portugal, which was calculated as 3849.15€/year. A scale-up costing projection for implementing the PHS-pro to a larger young population was estimated to be even lower: 18.18€/year/child. This cost-consequence analysis provided evidence that the PHS-pro was economically feasible especially if compared with the medical costs for treating adult obesity. The PHS-pro can be a beneficial investment and may give a promising contribution to addressing overweight over childhood and adolescence, which are developmental stages that determine adulthood chronic diseases.
Vieira, Margarida↗
Sentinel
Network intrusion detection systems (NIDS) are commonplace in network security but they frequently employ algorithms that are computational demanding requiring hardware and software with significant power requirements. Two examples of such resource-intensive algorithms used for network security are regular expression matching and broader signature pattern matching which are commonly used in deep packet inspection (DPI). Network security algorithms that have large power requirements may be a challenge for low-power internet-of-things (IoT) environments, which generally lack the power resources to implement complex security measures like computationally expensive DPI at the edge. Furthermore, IoT environments incorporating 5G standalone networks have network latency constraints beyond just power that make DPI at the edge even more difficult. Programmable logic is ideally suited for machine learning inference for DPI because of its deep instruction level parallelism and single-cycle memory access. Machine learning approaches for DPI have been explored before using the programmable logic of field programmable gate arrays (FPGA) as a potential solution for NIDS approaches that would be power-suitable for IoT. However, those previous programmable logic NIDS approaches utilize either a supervised or unsupervised learning model. Sentinel utilizes the ensemble of these two machine learning approaches known as a semi-supervised approach which has shown promise in NIDS implementations. Sentinel provides a programmable logic implementation of a semi-supervised approach for DPI which operates at much lower power and latency than a GPU implementation with negligible loss of accuracy due to quantization through a logistic regressor.
Anderson, MatthewW [Idaho National Laboratory (INL↗
Hardware Evaluation Outreach: Application development Challenges Now and for the Exascale Era
The intent of this document is to assist the programmer in understanding details of contemporary and Exascale hardware system design and how these designs provide opportunities and place constraints on next-generation simulation software design. We attempt to clarify hardware organization and component details for our most current and Exascale systems to help program developers understand how software needs to change in order to take best advantage of the performance available. Exascale success is specifically defined for ECP as a 50x improvement over baseline in the aggregate "capability volume" on several KPP axes, of which raw floating point performance is only one, but also includes characteristics such as problem size, system memory size, node memory size, power, and efficiency. This multi-axis approach is particularly important to understand in the context of delivered improvements in real applications, since, for instance, the floating point computation may comprise less than 10% of the actual computational work required. Given the Exascale requirements and the constraints these requirements put on the performance expectations of fundamental system components, the programmer will be forced to re-think several application implementation details in order to achieve exaflop performance on these systems. The remainder of this document aims to present more detail on Exascale era system hardware and the specific areas that the programmer should address to extract performance from these systems. We attempt to give the programmer guidance at both a high- and low-level, providing some abstract suggestions on how to refactor codes given the expected system architectures and some low-level recommendations on how to implement these modifications. We also include a section on training resources that are helpful for both programmers that are just beginning to understand code modifications for contemporary and Exascale systems and for those that have done some refactoring and are now trying to extract maximal application performance from these systems.
97 MATHEMATICS AND COMPUTING↗
A Model from the Mind to the Operating Facility - 16448
The reprocessing of Spent Magnox fuel has been undertaken at the Sellafield site in the United Kingdom (UK) for more than 50 years and is now entering the final few years of its operating programme. The age of this facility has resulted in additional operational challenges which have led to the need for a sustained programme of continuous improvement. It has therefore been necessary to assess what potential plant improvements are key to delivering a successful end to the operating programme. In 2003 the UK National Nuclear Laboratory (NNL) (then Nexia Solutions) worked with Sellafield Ltd to produce a visual discrete event simulation (DES) model. The DES approach models plant equipment (such as a storage pond crane or fuel element processing equipment), and the key processes that these items undertake. Process times, availability and process logic are all combined to provide a prediction of the plant performance. Through the use of 'what-if' scenarios, changes to any model parameter can be undertaken. The benefits of such an approach have been in the ability for Sellafield Ltd to understand which changes to make and which do not add value. This then allows the operating facility to focus the improvement programme on quantitatively underpinned benefits, thus increasing the potential to complete the reprocessing programme ahead of schedule, which is a key aim for Sellafield Ltd. Maximising the benefit of this model has required a close working relationship between NNL, Sellafield Ltd Technical and the Sellafield Ltd Operations teams to ensure that the model is using the correct information and is addressing the real issues at hand. Over the past 12 years many ideas have been assessed and three examples have been selected to demonstrate the range of use of the model, and the different approaches used to identify issues and opportunities, agree an approach and provide solutions. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Fit for Purpose Remote Technology Decommissioning Solutions - 18630
The Magnox Decommissioning Project is actively progressing clean-up and decommissioning of 12 reactor sites across England, Scotland and Wales. Funded and directed by the United Kingdom's Nuclear Decommissioning Authority (NDA) and managed by the Cavendish Fluor Partnership (CFP), the Magnox Decommissioning Project introduces a wide range of radiological and industrial hazards warranting deployment of remote technologies to safely de-inventory, decontaminate and decommission a vast array of nuclear facilities. The Magnox Decommissioning Project encompasses 22 former Magnox nuclear power production reactors across 10 reactor sites and five research/test reactors at two former research sites. Decommissioning activities have been underway at some sites for nearly 20 years with early focus on retrieving and stabilising wastes and draining and stabilising spent fuel ponds. The Magnox decommissioning strategy invokes a programme perspective to drive consistency in tackling similar decommissioning and waste challenges across multiple sites. Programme central teams have worked with technology suppliers to foster learning from industry experience to develop and deploy tooling and robotics. The programme approach has also facilitated learning from one site to the next. In many cases, this central programme approach has promoted an evolution of technologies resulting in optimisation of simple remote tooling. In other instances, collaboration with suppliers is producing state-of-the-art technologies to tackle more unique challenges including, most recently, early demonstration of laser cutting for reactor vessel dismantling. This paper will outline the programme management approach and the scalable optioneering process Magnox employs to select the engineered controls and technologies used in decommissioning and waste management activities. It will provide an overview of the broad range of remote tooling and robotics deployed across the 12 Magnox sites by exploring some specific examples. Lastly, the paper will summarise key lessons learned in the now extensive history of selecting and using remote technologies to decommission Magnox nuclear facilities. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Industry overview of TRANSCEND - 20271
The United Kingdom has a legacy of nuclear facilities to decommission and radioactive waste to manage and dispose of. The TRANSCEND programme is an independent research programme with significant participation from industrial organizations that are involved in that decommissioning programme and radioactive waste management. The participation has led to a programme that is both academically robust enough to attract significant funding from the EPSRC, the universities themselves and relevant enough to be supported financially by the industrial partners who see the needs and drivers. The programme offers benefits in terms of the development of people and in enabling and promoting innovation in both hardware and software tools. Industrial engagement is fundamental to being able to capitalise on that innovation. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Assessment of work-integrated learning: comparison of the usage of a grading rubric by supervising radiographers and teachers
Introduction: Professional work-integrated learning (WIL) that integrates the academic experience with off-campus professional experience placements is an integral part of many tertiary courses. Issues with the reliability and validity of assessment grades in these placements suggest that there is a need to strengthen the level of academic rigour of placements in these programmes. This study aims to compare the attitudes to the usage of assessment rubrics of radiographers supervising medical imaging students and teachers supervising pre-service teachers. Methods: WIL placement assessment practices in two programmes, pre-service teacher training (Avondale College of Higher Education, NSW) and medical diagnostic radiography (Faculty of Health Sciences, University of Sydney, NSW), were compared with a view to comparing assessment strategies across these two different educational domains. Educators (course coordinators) responsible for teaching professional development placements of teacher trainees and diagnostic radiography students developed a standards-based grading rubric designed to guide assessment of students’ work during WIL placement by assessors. After ∼12 months of implementation of the rubrics, assessors’ reaction to the effectiveness and usefulness of the grading rubric was determined using a specially created survey form. Data were collected over the period from March to June 2011. Quantitative and qualitative data found that assessors in both programmes considered the grading rubric to be a vital tool in the assessment process, though teacher supervisors were more positive about the benefits of its use than the radiographer supervisors. Results: Benefits of the grading rubric included accuracy and consistency of grading, ability to identify specific areas of desired development and facilitation of the provision of supervisor feedback. The use of assessment grading rubrics is of benefit to assessors in WIL placements from two very different teaching programmes. Conclusion: Radiographers appear to need more training in the rubric's use, whereas teachers are found to generally use it appropriately. There are implications drawn from this finding that are applicable to health science and medical education in general.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
A Global View Programming Abstraction for Transitioning MPI Codes to PGAS Languages
The multicore generation of scientific high performance computing has provided a platform for the realization of Exascale computing, and has also underscored the need for new paradigms in coding parallel applications. The current standard for writing parallel applications requires programmers to use languages designed for sequential execution. These languages have abstractions that only allow programmers to operate on the process centric local view of data. To provide suitable languages for parallel execution, many research efforts have designed languages based on the Partitioned Global Address Space (PGAS) programming model. Chapel is one of the more recent languages to be developed using this model. Chapel supports multithreaded execution with high-level abstractions for parallelism. With Chapel in mind, we have developed a set of directives that serve as intermediate expressions for transitioning scientific applications from languages designed for sequential execution to PGAS languages like Chapel that are being developed with parallelism in mind.
Global Domain↗
Cross-border cooperation in inner Scandinavia: A territorial impact assessment
The use of territorial impact assessment procedures is gaining increasing relevance in the European Union policy evaluation processes. However, no concrete territorial impact assessment tools have been applied to evaluating EU cross-border programmes. In this light, this article provides a pioneering analysis on how to make use of territorial impact assessment procedures on cross-border programmes. More specifically, it assesses the main territorial impacts of the Inner Scandinavian INTERREG-A sub-programme, in the last 20 years (1996–2016). It focuses on its impacts on reducing the barrier effect, in all its main dimensions, posed by the presence of the administrative border. The results indicate a quite positive impact of the analysed cross-border cooperation programme, in reducing the barrier effect in all its main dimensions. The obtained potential impact values for each analysed dimension indicate, however, that the ‘economy-technology’ dimension was particularly favoured, following its strategic intervention focus in stimulating the economic activity and the attractiveness of the border area. - Highlights: • A territorial impact assessment method to assess cross-border cooperation is proposed. • This method rationale is based on the main dimensions of the barrier effect. • This method identified positive impacts in all analysed dimensions. • The economy-technological dimension was the most positively impacted one.
54 ENVIRONMENTAL SCIENCES↗
Tuning Molecular Interactions between Peptoids and Substrates to Achieve Surface-Agnostic Coating
Achieving programmable and robust coatings that maintain functionality while adhering to various surface types with molecular-level tunability and programmable features remains challenging. In this study, we develop adaptable and stable surface-agnostic coatings (SACs) based on crystalline peptoid membranes by tuning interpeptoid and peptoid-substrate interactions. We utilize two complementary methods: (1) surfaceinduced assembly, where peptoid membranes form directly on substrates, and (2) depositing preformed peptoid crystalline membranes via an aqueous layer-by-layer (LbL) assembly technique. These strategies are applied to substrates with diverse surface chemistries and topographies, including mica, highly ordered pyrolytic graphite (HOPG), MoS 2 , sapphire, and porous membranes like porous alumina and polysulfide. Atomic force microscopy confirms the formation of peptoid coatings and reveals differences in assembly behavior across surfaces. Moisture vapor transport measurements serve as a proof-of-concept test for membrane continuity and tunable permeance. Together, these findings demonstrate the adaptability and programmability of peptoid-based SACs, enabling rational coating design on surfaces with diverse chemical and topographical features. Furthermore, this work opens pathways for using peptoid membranes as programmable surface modifiers in functional interfaces, protective coatings, and membrane platforms.
biomimetic polymers↗
Revealing the structure of light pseudoscalar mesons at the electron–ion collider
The questions of how the bulk of the Universe's visible mass emerges and how it is manifest in the existence and properties of hadrons are profound, and probe the heart of strongly interacting matter. Paradoxically, the lightest pseudoscalar mesons appear to be key to a further understanding of the emergent mass and structure mechanisms. These mesons, namely, the pion and kaon, are the Nambu-Goldstone boson modes of quantum chromodynamics (QCD). Unravelling their partonic structure and the interplay between emergent and Higgs-boson mass mechanisms is a common goal of three interdependent approaches - continuum QCD phenomenology, lattice-regularised QCD, and the global analysis of parton distributions - linked to experimental measurements of hadron structure. Experimentally, the anticipated electron-ion collider will enable a revolution in our ability to study pion and kaon structures, accessed by scattering from the 'meson cloud' of the proton through the Sullivan process. With the goal of enabling a suite of measurements that can address these questions, we examine key reactions that identify the critical detector-system requirements needed to map tagged pion and kaon cross-sections over a wide range of kinematics. The excellent prospects for extracting pion structural, functional, and form-factor data are outlined, and similar prospects for kaon structures are discussed in the context of a worldwide programme. Finally, the successful completion of the programme outlined herein will deliver deep, far-reaching insights into the emergence of pions and kaons, their properties, and their role as QCD's Goldstone boson modes.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Dispatchable Virtual Oscillator Control for Decentralized Inverter-Dominated Power Systems: Analysis and Experiments: Preprint
This paper presents an analysis and experimental validation of dispatchable virtual oscillator control (dVOC) for inverter-dominated power systems. dVOC is a promising decentralized control strategy that requires only local measurements to induce grid-forming behavior with programmable droop characteristics. It is dispatchable -- i.e., the inverters can vary their power generation via user-defined power set-points and guarantees strong stability. To verify its feasibility, a testbed comprising multiple dVOC-programmed inverters with transmission line impedances is designed. With an embedded synchronization strategy, the dVOC inverters are capable of dynamic synchronization, black start operation, and transient grid voltage regulation with dynamic load sharing, and real-time-programmable droop characteristics for backward compatibility. All these features are experimentally verified.
14 SOLAR ENERGY↗