Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power Measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Future computing platforms for science in a power constrained era

Power consumption will be a key constraint on the future growth of Distributed High Throughput Computing (DHTC) as used by High Energy Physics (HEP). This makes performance-per-watt a crucial metric for selecting cost-efficient computing solutions. For this paper, we have done a wide survey of current and emerging architectures becoming available on the market including x86-64 variants, ARMv7 32-bit, ARMv8 64-bit, Many-Core and GPU solutions, as well as newer System-on-Chip (SoC) solutions. We compare performance and energy efficiency using an evolving set of standardized HEP-related benchmarks and power measurement techniques we have been developing. In conclusion, we evaluate the potential for use of such computing solutions in the context of DHTC systems, such as the Worldwide LHC Computing Grid (WLCG).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

A new algorithm for identifying the flavour of B 0 s mesons at LHCb

A new algorithm for the determination of the initial flavour of B 0 s mesons is presented. The algorithm is based on two neural networks and exploits the b hadron production mechanism at a hadron collider. The first network is trained to select charged kaons produced in association with the B 0 s meson. The second network combines the kaon charges to assign the B 0 s flavour and estimates the probability of a wrong assignment. The algorithm is calibrated using data corresponding to an integrated luminosity of 3 fb –1 collected by the LHCb experiment in proton-proton collisions at 7 and 8 TeV centre-of-mass energies. The calibration is performed in two ways: by resolving the B 0 s – B ¯ 0 s flavour oscillations in B 0 s → D – s π + decays, and by analysing flavour-specific B * s 2 (5840) 0 → B + K – decays. The tagging power measured in B 0 s → D – s π + decays is found to be (1.80 ± 0.19 (stat) ± 0.18 (syst))%, which is an improvement of about 50% compared to a similar algorithm previously used in the LHCb experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Exploring the non-Gaussianity of the cosmic infrared background and its weak gravitational lensing

ABSTRACT Gravitational lensing deflects the paths of photons, altering the statistics of cosmic backgrounds and distorting their information content. We take the cosmic infrared background (CIB), which provides plentiful information about galaxy formation and evolution, as an example to probe the effect of lensing on non-Gaussian statistics. Using the Websky simulations, we first quantify the non-Gaussianity of the CIB, revealing additional detail on top of its well-measured power spectrum. To achieve this, we use needlet-like multipole-band filters to calculate the variance and higher-point correlations. Using our simulations, we show the two-, three- and four-point spectra, and compare our calculated power spectra and bispectra to Planck values. We then lens the CIB, shell-by-shell with corresponding convergence maps, to capture the broad redshift extent of both the CIB and its lensing convergence. The lensing of the CIB changes the three- and four-point functions by a few tens of per cent at large scales, unlike with the power spectrum, which changes by less than two per cent. We expand our analyses to encompass the full intensity probability distribution functions (PDFs) involving all n-point correlations as a function of scale. In particular, we use the relative entropy between lensed and unlensed PDFs to create a spectrum of templates that can allow estimation of lensing. The underlying CIB model is missing the important role of star bursting, which we test by adding a stochastic lognormal term to the intensity distributions. The novel aspects of our filtering and lensing pipeline should prove useful for any radiant background, including line intensity maps.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Remarkably robust and correlated coherence and antiferromagnetism in (Ce 1-x La x )Cu 2 Ge 2

We present magnetic susceptibility, resistivity, specific heat, and thermoelectric power measurements on (Ce 1-x La x )Cu 2 Ge 2 single crystals (0 ≤ x ≤ 1). With La-substitution, the antiferromagnetic temperature T N is suppressed in an almost linear fashion and moves below 0.36 K, the base temperature of our measurements for x > 0.8. Surprisingly, in addition to robust antiferromagnetism, the system also shows low temperature coherent scattering below T coh up to ~0.9 of La, indicating a small percolation limit ~9% of Ce. T coh as a function of magnetic field was found to have different behavior for x < 0.9 and x > 0.9. Remarkably, (T coh ) 2 at H = 0 was found to be linearly proportional to T N . In conclusion, the jump in the magnetic specific heat δC m at T N as a function of T K /T N for (Ce 1-x La x )Cu 2 Ge 2 follows the theoretical prediction based on the molecular field calculation for the S = 1/2 resonant level model.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Photon diagnostics at the FLASH THz beamline

The THz beamline at FLASH, DESY, provides both tunable (1–300 THz) narrow-bandwidth (&sim;10%) and broad-bandwidth intense (up to 150 uJ) THz pulses delivered in 1 MHz bursts and naturally synchronized with free-electron laser X-ray pulses. Combination of these pulses, along with the auxiliary NIR and VIS ultrashort lasers, supports a plethora of dynamic investigations in physics, material science and biology. The unique features of the FLASH THz pulses and the accelerator source, however, bring along a set of challenges in the diagnostics of their key parameters: pulse energy, spectral, temporal and spatial profiles. Here, these challenges are discussed and the pulse diagnostic tools developed at FLASH are presented. In particular, a radiometric power measurement is presented that enables the derivation of the average pulse energy within a pulse burst across the spectral range, jitter-corrected electro-optical sampling for the full spectro-temporal pulse characterization, spatial beam profiling along the beam transport line and at the sample, and a lamellar grating based Fourier transform infrared spectrometer for the on-line assessment of the average THz pulse spectra. Corresponding measurement results provide a comprehensive insight into the THz beamline capabilities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Integration of a Smart Outlet-Based Plug Load Management System with a Building Automation System

The growth of and reliance on renewable energy necessitate a multi-pronged approach to achieve grid reliability and economics. As they represent a notable portion of U.S. energy consumption, commercial buildings must play an active role in this effort. Conserving energy and responding to grid conditions through demand flexibility can be achieved through the integration of major building systems. Integration of plug and process loads with lighting and heating, ventilation, and air conditioning systems maximizes the effectiveness of integrated building energy management. In this research, we demonstrate the integration of smart outlets into a building automation system. We cover the installation process as well as the architecture required for smart outlets to communicate data to the building automation system and to receive commands back. After recording power measurements for one week as a baseline, we configured the building automation system to turn the smart outlets on and off according to a set schedule. This resulted in energy savings of 66% during 1 week on 25 plug loads. This work demonstrates that grid-interactive efficient buildings are achievable through building system integration.

building automation system↗
DOE OSTI2019

Data-Driven Load Modeling and Forecasting of Residential Appliances

The expansion of residential demand side management programs and increased deployment of controllable loads require accurate appliance-level load modeling and forecasting. This paper proposes a conditional hidden semi-Markov model to describe the probabilistic nature of residential appliance demand. Model parameters are estimated directly from power consumption data using scalable statistical learning methods. We also propose an algorithm for short-term load forecasting as a key application for appliance-level load models. Case studies performed using granular sub-metered power measurements from various types of appliances demonstrate the effectiveness of the proposed load model for short-term prediction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Distribution System Parameter and Topology Estimation Applied to Resolve Low-Voltage Circuits on Three Real Distribution Feeders

Accurate distribution secondary low-voltage circuit models are needed to enhance overall distribution system operations and planning, including effective monitoring and coordination of distributed energy resources located in the secondary circuits. We present a full-scale demonstration across three real feeders of a computationally efficient approach for estimating the secondary circuit topologies and parameters using historical voltage and power measurements provided by smart meters. The method is validated against several secondary configurations, and compares favorably to satellite imagery and the utility secondary model. Feeder-wide results show how much parameters can vary from simple assumptions. In conclusion, model sensitivities are tested, demonstrating only modest amounts of data and resolutions of data measurements are needed for accurate parameter and topology results.

42 ENGINEERING↗
DOE OSTI2017

Periodically pulsed laser-assisted tunneling may generate terahertz radiation

In this work, a mode-locked ultrafast laser focused on the tunneling junction of a scanning tunneling microscope superimposes harmonics of the laser pulse repetition frequency on the direct current tunneling current. The power measured at the first 200 harmonics (up to 14.85 GHz) varies as the inverse square of the frequency due to shunting by the stray capacitance and the resistance in the circuit. However, Fourier analysis suggests that within the tunneling junction there is no significant decay of the harmonics until terahertz frequencies comparable to the reciprocal of the laser pulse-width. Two different types of analysis are used to model the generation of the frequency comb within the tunneling junction. Similar results are obtained, suggesting that the harmonics may extend to terahertz frequencies. Thus, the tunneling junction may be used as a subnanometer sized source of terahertz radiation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

SoDa: An Irradiance-Based Synthetic Solar Data Generation Tool (SoDa) v0.1

SoDa is an irradiance-based synthetic Solar Data generation tool to generate realistic sub-minute solar photovoltaic (PV) power time series, that emulate the weather pattern for a certain geographical location. Our tool relies on the National Solar Radiation Database (NSRDB) to obtain irradiance and weather data patterns for the site. Irradiance is mapped onto a PV model estimate of a solar plant's 30-min power output, based on the configuration of the panel. We use a stochastic model with a switching behavior due to different weather regimes as provided by the cloud type label in the NSRDB, with parameters for the cloudy states trained on the high-resolution solar power measurements from a Phasor Measurement Unit (PMU).

Carreno, IgnacioLosada↗
DOE OSTI2017

Multi-hole gasoline direct injection:In-nozzle flow and primary breakup investigated in transparent nozzlesand with X-ray

This contribution describes the flow field inside modern gasoline direct-injection nozzles and sprays. Starting from the internal nozzle flow, results from transparent real-size nozzles are shown, where a significant vapor fraction even for cold fuel conditions is proven. Based on vapor fraction inside the nozzle, evidence for (super-)sonic flow conditions inside the nozzle is shown. The nozzle outlet velocity is determined by means of X-ray structure tracking velocimetry, which is a very powerful measurement technique to gain access to the very dense spray at the nozzle outlet. The X-ray velocities are compared to values that are determined by means of optical—phase Doppler anemometry/laser Doppler anemometry and Schlieren imaging—measurement techniques. By extrapolating the maximum droplet velocities found by laser Doppler anemometry in the more downstream regions of the spray to the nozzle outlet region, very similar velocities to the one derived from the X-ray measurements close to Bernoulli velocity are evaluated for typical gasoline direct-injection engine conditions. A third access to the nozzle outlet velocity is given by the derivation of penetration curves. The combination of vapor fractions and outlet velocities provides a measure for the initial spray momentum.

42 ENGINEERING↗
DOE OSTI2021

Fabrication and Tuning of a THz-Driven Electron Gun

We have developed a THz-driven field emission electron gun and beam characterization assembly. The two cell standing-wave gun operates in the pi mode at 110.08 GHz. It is designed to produce 360 keV electrons with 500 kW of input power supplied by a 110 GHz gyrotron. Multiple gun structures were electroformed in copper using a high precision diamond-turned mandrel. The field emission cathode is a rounded copper tip located in the first cell. The cavity resonances were mechanically tuned using azimuthal compression. This work will discuss details of the fabrication and tuning and present the results of low power measurements.

43 PARTICLE ACCELERATORS↗
DOE OSTI2012

How to Plug In a Supercomputer: Quantifying Power Consumption at Scale [Slides]

Power is becoming an increasingly important concern for large super computercenters. However,todate,therehavebeenadearthofstudiesof power usage “in the wild”—on production supercomputers running pro duction workloads. In this talk, we present the initial results of an effort to characterize the power usage of three Top100 supercomputers at Los Alamos National Laboratory: Cielo, Roadrunner, and Luna (#18, #22, and #64, respectively, on the November 2012 Top500 list). Power measure ments taken both at the switchboard level and within the compute racks are presented and discussed.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Measurement of beam-induced power in the NSLS-II diagnostic stripline

A diagnostic stripline for experimental study of beam-induced heating has been designed, manufactured, and installed in the NSLS-II storage ring. Two 150-mm long striplines are installed in the round pipe with a 79.25 mm diameter; EIA-type feedthroughs are connected to the ends. Beam-induced power was measured using a broadband oscilloscope connected to the stripline feedthrough by a 28-m long cable. The measurement procedure is described, the measured results are presented.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Generation of Large-Volume High-Pressure Plasma by Spatio-Temporal Control of Space Charge

Due to the fundamental limitations of scaling, very little progress has been made towards achieving a large-volume dense non-equilibrium plasma near atmospheric pressures. Commercially available state-of-the art glow-like atmospheric plasma devices for industrial applications are either narrow tubes or wide slits with narrow openings. Often multiple sources are put together in various configurations to process larger surfaces. The traditional methods of exciting electrodes create spatially fixed electric fields. As a result, the space charge at atmospheric pressure tends to be spatially confined resulting in non-uniformity which eventually leads to instability as the discharge is scaled. Theoretical work done under this project showed that it is possible to generate a spatially rotating electric field by exciting a set of electrodes with phase staggered sinusoidal waveforms. The modeling and simulations were done using plasma fluid models. It was shown that such a field can produce a uniform plasma. At the conclusion of the project, experimental proof of concept with an eight-electrode system in various gases (Air, Helium and Argon) was demonstrated. Power measurements and spectral investigation show that the concept can be used to generate a uniform stable plasma. This plasma source has the potential of opening new applications of nonthermal plasma including combustion of carbon-free fuel. The current limitation of the proposed method in scaling to higher volume and pressure is the need for multiple high voltage amplifiers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

LEED: A Lightwave Energy-Efficient Datacenter

The Lightwave Energy-Efficient Datacenter (LEED) program is a disruptive “green-field” approach that provides a quantum leap in the energy efficiency of datacenters. LEED’s fundamental value proposition is that a novel and re-architected optical network—RotorNet— can deliver “more bandwidth per buck” as well as unique system-level attributes that significantly improve overall datacenter energy efficiency and performance. LEED has developed three system-level testbeds. The first testbed uses calibrated hardware and software power measurements to determine server energy efficiency as a function of network bandwidth and workload. These measurements have shown that increasing network communications bandwidth dramatically increases server energy efficiency providing a realistic path to the overall ENLITENED program goal of doubling the number of transactions per joule. The second testbed demonstrates key hardware: a prototype low-loss, high-port count optical “selector switch”. This switch was fabricated, racked, and tested. Measured switch characteristics include loss, bandwidth, crosstalk, switch time, system-level switch time (including the transceivers), and bit error rate. The third testbed demonstrates a fully working and manufactured pinwheel design which dramatically lowers the cost of design, while delivering high switch radix and low reconfiguration times. The LEED project has tied these three novel photonic switch prototypes together with production servers and software through the development of a novel FPGA-based NIC platform called Corundum. Corundum ensures that the packet-switched protocols supported by commodity operating systems and devices can interface with the Rotor switch design. The LEED group has used this combined hardware and software prototype to characterize applications running at a commercially relevant scale. The project has used a combination of enhanced optical modulation amplitude (OMA) modulators, broadband multiplexers and demultiplexers, avalanche photodiodes, and a novel burst-mode receivers to enable the insertion of LEED-developed optical switches without the need for expensive optical amplification. Our modeling has shown that measured LEED-developed device characteristics can achieve link characteristics of 2 pJ/bit including both transceivers and the Rotor switch. In summary, the LEED program has demonstrated a credible and practical path, through novel hardware and software, to realize the program objectives of ENLITENED. The net result will ensure that the United States maintains its strength in the crucial sector of Information Technology, which is vital to both our economic security and our national security.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

CalTestBed - Delphire - Testing and Evaluation of Delphire Sentinel System (CRADA Final Report)

The Delphire Sentinel is a modular fire detection and communications system operating as a mobile field unit, with low voltage DC power supplied by onboard photovoltaics (PV) and batteries. The Sentinel addresses several aspects of fire detection, communications and data analysis. The Sentinel's mobility enables it to be rapidly deployed and operate independently of existing power and communications networks. The duration of independent operation depends critically on the energy consumption of the systems and performance of the onboard PV and battery. The purpose of this testing is to ascertain the power draw and energy consumption of the Delphire Sentinel prototype system under several operational states, including various data transfer packet sizes, transmission time and frequencies, and communication pathways (Wi-Fi, cellular, satellite) expected to be encountered in field deployments. It will also include procedures to test the ability of the Sentinel to operate for extended periods without loss of functionality. Based on results from energy and power measurements, and anticipated duty cycles in field deployments, we will model annual system autonomy (e.g. loss of load probability) for off-grid operation in representative locations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Minimizing Auxiliary Heat Use for Cold Climate Operation of Air-Source Heat Pumps

This paper investigates the auxiliary heat use for air-source heat pumps (ASHPs) operating in cold climate conditions. Twelve variable-capacity, central ducted ASHPs installed in single-family homes in cold climate regions (eleven in northwest United States and one in Denver suburb) were monitored for an entire winter season to collect data at cold temperatures. The methodology employed airside and power measurements that were taken every five-seconds, to calculate heat pump's capacity, coefficient of performance (COP), and auxiliary heat energy consumption. This paper provides valuable insights into the practical implications of auxiliary heat utilization in centrally ducted ASHPs and suggests opportunities to mitigate the usage of auxiliary heat, improving the overall system efficiency during cold climate operation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗