Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The split-cross-bridge resistor for measuring the sheet resistance, linewidth, and line spacing of conducting layers

A new test structure was developed for evaluating the line spacing between conductors on the same layer using an electrical measurement technique. This compact structure can also be used to measure the sheet resistance, linewidth, and line pitch of the conducting layer. Using an integrated-circuit fabrication process, this structure was fabricated in diffused polycrystalline silicon and metal layers and measured optically and electrically. For the techniques used, the optical measurements were typically one-quarter micron greater than the electrical measurements. Most electrically measured line pitch values were within 2 percent of the designed value. A small difference between the measured and designed line pitch is used to validate sheet resistance, linewidth, and line spacing values.

Buehler, M. G.↗

A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗

Preparation and characterization of indium doped CdS{sub 0.2}Se{sub 0.8} thin films by spray pyrolysis

The CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been deposited onto the amorphous glass and fluorine doped tin oxide coated glass substrates by spray pyrolysis. The doping concentration of indium has been optimized by photoelectrochemical characterization technique. The structural, surface morphological, optical and electrical properties of CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been studied. X-ray diffraction studies reveal that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy studies reveal that the grains are uniform with uneven spherically shaped, distributed over the entire substrate surface. The complete surface morphology has been changed after doping. In optical studies, the transition of the deposited films is found to be direct allowed with optical energy gaps decreasing from 1.91 to 1.67 eV with indium doping. Semiconducting behavior has been observed from resistivity measurements. The thermoelectric power measurements reveal that the films exhibit n-type conductivity.

36 MATERIALS SCIENCE↗

Chemical precursor impact on the properties of Cu{sub 2}ZnSnS{sub 4} absorber layer

In present work impact of different chemical precursor on the deposition of solar absorber layer Cu{sub 2}ZnSnS{sub 4} (CZTS) were studied by Chemical Bath Deposition (CBD) method without using expensive vacuum facilities and followed by annealing. As compared to the other deposition methods, CBD method is interesting one because it is simple, reproducible, non-hazardous, cost effective and well suited for producing large-area thin films at low temperatures, although effect of precursors and concentration plays a vital role in the deposition. So, the central theme of this work is optimizing and controlling of chemical reactions for different chemical precursors. Further Effect of different chemical precursors i.e. sulphate and chloride is analyzed by structural, morphological, optical and electrical properties. The X-ray diffraction (XRD) of annealed CZTS thin film revealed that films were polycrystalline in nature with kestarite tetragonal crystal structure. The Atomic Force micrographs (AFM) images indicated total coverage compact film and as well as growth of crystals. The band gap of annealed CZTS films was found in the range of optimal band gap by absorption spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LiMo 8 O 10 : Polar Crystal Structure with Infinite Edge-Sharing Molybdenum Octahedra

Here, polycrystalline LiMo 8 O 10 was prepared in a sealed Mo crucible at 1380 °C for 48 h using the conventional high-temperature solid-state method. The polar tetragonal crystal structure (space group I4 1 md) is confirmed based on the Rietveld refinement of powder neutron diffraction and 7 Li/ 6 Li solid-state NMR. The crystal structure features infinite chains of Mo 4 O 5 (i.e., Mo 2 Mo 4/2 O 6/2 O 6/3 ) as a repeat unit containing edge-sharing Mo 6 octahedra with strong Mo–Mo metal bonding along the chain. X-ray absorption near-edge spectroscopy of the Mo-L 3 edge is consistent with the formal Mo valence/configuration. Magnetic measurements reveal that LiMo 8 O 10 is paramagnetic down to 1.8 K. Temperature-dependent resistivity [ρ(T)] measurement indicates a semiconducting behavior that can be fitted with Mott’s variable range hopping conduction mechanism in the temperature range of 215 and 45 K. The ρ(T) curve exhibits an exponential increase below 5 K with a large ratio of ρ 1.8 /ρ 300 = 435. LiMo 8 O 10 shows a negative field-dependent magnetoresistance between 2 and 25 K. Heat capacity measurement fitted with the modified Debye model yields the Debye temperature of 365 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and electronic transport studies of self-doped Pr{sub 1−x}MnO{sub 3±δ} manganites

Structural and electrical transport studies on polycrystalline self-doped Pr{sub 1−x}MnO{sub 3±δ} (with x=0, 0.1 and 0.125) have been done using XRD and low-temperature resistivity measurement. The results of the Rietveld refinement of XRD data show that all these compounds crystallize in an orthorhombic structure with Pnma space-group. With increasing A-site vacancies, the unit cell volume decrease and lattice parameters undergo non monotonous change. The electrical transport studies reveal insulating behaviour with small polaron hopping above T{sub C} and a kink corresponding to canted-antiferromagnetic spin ordering.

36 MATERIALS SCIENCE↗

Structural investigation of Sr{sub 2}LiReO{sub 6}. Evidence for a continuous tetragonal-cubic phase transition

The presence of a continuous and reversible Fm3-barm-I4/m phase transition in a polycrystalline sample of the ordered double perovskite Sr{sub 2}LiReO{sub 6} is described. The transition that occurs near 300 deg. C is a consequence of in-phase tilting of the BO{sub 6} octahedra. The temperature dependence of both the lattice parameters and the spontaneous strains are consistent with a second order phase transition as would be expected for a soft mode transition. - Graphical Abstract: The crystal structure of polycrystalline Sr{sub 2}LiReO{sub 6} from room temperature 30 to 500 deg. C is described. The sample undergoes a continuous and second order I4/m to Fm3-barm phase transition. This transition is reversible and the tetragonal structure is formed upon re-cooling the cubic form.

36 MATERIALS SCIENCE↗

Multiscale structural analysis of polymorphic phase boundaries in doped antiferroelectric sodium niobate

In the current work, we have performed multiscale structural analysis of a Pb-free sodium niobate-based smart system, i.e., 0.9⁢NaNbO 3 –0.1⁢Ba 0.9 ⁢Ca 0.1 ⁢TiO 3 (NN-10BCT) reported earlier for its high ferroelectric response. We have investigated the temperature-dependent evolution of crystal structure at long, medium, and short ranges using synchrotron x-ray diffraction (SXRD), Raman scattering, and pair distribution function(PDF) techniques in conjunction with dielectric studies. Temperature-dependent synchrotron x-ray diffraction data combined with dielectric analysis suggest two unique polymorphic phase boundaries (PPB) with two coexisting ferroelectric phases stable in the wide temperature ranges. These PPBs are stable in different regions viz. (i) cryogenic temperatures with coexisting R3c and Pmc⁢2 1 phases (ii) vicinity of room temperatures with coexisting Pmc⁢2 1 and Amm2 phases. In contrast to the conclusions drawn from SXRD, PDF reveals structures having lower symmetry (with coexisting Cc+ Pmc2 1 phases at 1.7 ≤r≤ 20 Å) at short ranges for these PPBs. In conclusion, the presence of different long- and short-range symmetries (accommodating tilt-oriented ferroelectric phases) in the unique polymorphic phase boundaries makes them thermally stable and advantageous for technological applications.

36 MATERIALS SCIENCE↗

Influence of the rare-earth element on the effects of the structural and magnetic phase transitions in CeFeAsO, PrFeAsO, and NdFeAsO

We present results of transport and magnetic properties and heat capacity measurements on polycrystalline CeFeAsO, PrFeAsO and NdFeAsO. These materials undergo structural phase transitions, spin density wave-like magnetic ordering of small moments on iron and antiferromagnetic ordering of rare-earth moments. The temperature dependence of the electrical resistivity, Seebeck coefficient, thermal conductivity, Hall coefficient and magnetoresistance are reported. The magnetic behavior of the materials have been investigated using Moessbauer spectroscopy and magnetization measurements. Transport and magnetic properties are affected strongly by the structural and magnetic transitions, suggesting significant changes in the band structure and/or carrier mobilities occur, and phonon-phonon scattering is reduced upon transformation to the low-temperature structure. Results are compared with recent reports for LaFeAsO, and systematic variations in properties as the identity of Ln is changed are observed and discussed. As Ln progresses across the rare-earth series from La to Nd, an increase in the hole contributions to the Seebeck coefficient and increases in magnetoresistance and the Hall coefficient are observed in the low-temperature phase. Analysis of hyperfine fields at the iron nuclei determined from Moessbauer spectra indicates that the moment on Fe in the orthorhombic phase is nearly independent of the identity of Ln, in apparent contrast to reports of powder neutron diffraction refinements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, morphological and Raman studies of pulse electrosynthesised indium antimonide thin films

InSb films deposited on fluorine doped tin oxide (FTO) substrates by a pulse elctrodeposition technique. The deposition was carried out at an applied potential −1.3V versus Ag/AgCl electrode. Structural, morphological and optical studies were performed on the electrodeposited InSb. X-ray diffraction (XRD) studies show that the deposited InSb films are polycrystalline in nature having the zinc blend structure. The crystallite size (D), dislocation density (δ) and strain (ε) were calculated using XRD results. The EDAX analysis shows that chemical composition of In{sup 3+} and Sb{sup 3+} ions is close to the required stoichiometry. The surface morphology of the deposited films was examined using scanning electron microscopy (SEM). SEM studies reveal that the surface of the films is uniformly covered with submicron sized spherical particles. However, the crystallite size determined by the Scherrer method shows a size close to 30 nm. Surface morphology studies of the InSb films were also performed using atomic force microscopy (AFM). The average surface roughness as measured by AFM is around 40 nm. Hot probe studies show that all the electrodeposited thin films have n type conductivity and the thickness of the films is calculated using electrochemical formula.

36 MATERIALS SCIENCE↗

Study of the Micro-Nonuniformity of the Plastic Deformation of Steel

The plastic flow during deformation of real polycrystalline metals has specific characteristics which distinguish the plastic deformation of metals from the deformation of ordinary isotropic bodies. One of these characteristics is the marked micro-nonuniformity of the plastic deformation of metals. P.O. Pashkov demonstrated the presence of a considerable micro-nonuniformity of the plastic deformation of coarse-grained steel wit medium or low carbon content. Analogous results in the case of tension of coarse-grained aluminum were obtained by W. Boas, who paid particular attention to the role of the grain boundaries in plastic flow. The nonuniformit of the plastic deformation in microvolumes was also recorded by T.N. Gudkova and others, on the alloy KhN80T. N.F. Lashko pointed out the nonuniformity of the plastic deformation for a series of pure polycrystalline metals and one-phase alloys. In his later reports, P.O. Pashkov arrives at he conclusion that the nonuniformity of the distribution of the deformation along the individual grains has a significant effect on the strength and plastic characteristics of polycrystalline metals in the process of plastic flow. However, until now there has not existed any systematic investigation of the general rules of the microscopic nonuniformit of plastic deformation even though the real polycrystalline metals are extremely simple with regard to structure. In the present report, an attempt is made to study the micrononuniformity of the flow of polycrystalline metals by the method of statistical analysis of the variation of the frequency diagrams of the nonuniformity of the grains in the process of plastic deformation.

Chechulin, B. B.↗

Structure of vanadium oxide supported on ceria by multi-wavelength Raman spectroscopy

ABSTRACT The structure of vanadium oxide species supported on ceria (VOx/CeO2) was investigated under various conditions by in situ multi-wavelength Raman spectroscopy, IR spectroscopy, isotopic labeling and temperature programmed reduction (TPR). For the first time, the detailed structure of dehydrated VOx species was revealed on the polycrystalline ceria support. VOx species can co-exist on ceria surface in the structure of monomer, dimer, trimer, polymer, crystalline V2O5 and CeVO4 as a function of VOx loading. These species interact strongly with both the defect sites and labile surface oxygen of ceria, passivating the redox property of ceria. Under ambient condition, the dispersed VOx species are hydrated into polyvanadate species which can be reversibly dehydrated back to the original structure forms. The ceria support with defect sites facilitates the interaction between water (H218O) and V16Ox species, leading to very facile isotopic oxygen exchange between the two even at room temperature. During H2 reduction, both the VOx species and the ceria support can be reduced with ceria surface being more reducible. The reducibility of various dispersed VOx species scales with their polymerization degree, i.e., polymer > trimer > dimer > monomer. The reoxidation of reduced VOx species is found to proceed via ceria lattice oxygen instead of the gas phase oxygen where ceria acts as an oxygen buffer. The revealed structure evolution of surface VOx species on ceria under hydrated, dehydrated, reduced, and regenerated conditions provides a basis for understanding the vanadia-ceria catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Alkali-Metal Cations in Electronic Structure and Halide Segregation of Hybrid Perovskites

The ability to control or prevent phase segregation in perovskites is crucial to realizing stable and tunable mixed-halide optoelectronic devices. Here, we systematically examine the impact of alkali-metal-cation (Cs + and K + ) concentration on the band structure, chemical composition, phase segregation, and polycrystalline microstructure on formamidinium-dominated mixed-halide mixed-cation perovskite films. It was found that the incorporation of Cs + and K + cations decreases the work function and the core levels of all components shift toward higher binding energy consistent with n-doping the perovskite film, which facilitates electron transfer to the electron transport layer TiO 2 . A concentration-dependent film structure was observed by X-ray photoemission spectroscopy and grazing incidence wide-angle X-ray scattering where the halides and cations are distributed evenly across perovskite films at low metallic cation concentration (5%). A high metal-cation ratio (20%) leads to halide segregation within the perovskite film and the surface becomes bromide-poor, whereas the bromide and metal cations diffuse more deeply within the film. These differences in electronic properties, element distribution, and film morphology were reflected in the device performance where the power conversion efficiency of low-metallic-cation concentration (5% of Cs + and K + ) perovskite solar cells is ≈5% higher than the high-concentration ones (20%). This study provides valuable chemical and physical insight into the underlying trade-offs in the careful tuning of electrical properties and film structure to optimize multication and mixed-halide hybrid perovskites.

36 MATERIALS SCIENCE↗

Large spin-orbit torque efficiency enhanced by magnetic structure of collinear antiferromagnet IrMn

Spin-orbit torque (SOT) offers promising approaches to developing energy-efficient memory devices by electric switching of magnetization. Compared to other SOT materials, metallic antiferromagnet (AFM) potentially allows the control of SOT through its magnetic structure. Here, combining the results from neutron diffraction and spin-torque ferromagnetic resonance experiments, we show that the magnetic structure of epitaxially grown L1 0 -IrMn (a collinear AFM) is distinct from the widely presumed bulk one. It consists of twin domains, with the spin axes orienting toward [111] and [–111], respectively. This unconventional magnetic structure is responsible for much larger SOT efficiencies up to 0.60 ± 0.04, compared to 0.083 ± 0.002 for the polycrystalline IrMn. Furthermore, we reveal that this magnetic structure induces a large isotropic bulk contribution and a comparable anisotropic interfacial contribution to the SOT efficiency. Our findings shed light on the critical roles of bulk and interfacial antiferromagnetism to SOT generated by metallic AFM.

36 MATERIALS SCIENCE↗

Effect of dopent on the structural and optical properties of ZnS thin film as a buffer layer in solar cell application

In order to find the suitable alternative of toxic CdS buffer layer, deposition of pure ZnS and doped with Al by chemical bath deposition method have been reported. Further as grown pure and doped thin films have been annealed at 150°C. The structural and surface morphological properties have been characterized by X-Ray diffraction (XRD) and Atomic Force Microscope (AFM).The XRD analysis shows that annealed thin film has been polycrystalline in nature with sphalerite cubic crystal structure and AFM images indicate increment in grain size as well as growth of crystals after annealing. Optical measurement data give band gap of 3.5 eV which is ideal band gap for buffer layer for solar cell suggesting that the obtained ZnS buffer layer is suitable in a low-cost solar cell.

36 MATERIALS SCIENCE↗

Synthesis and structure analysis of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} with the garnet-related type structure

We have successfully synthesized a high-purity polycrystalline sample of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. Single crystals have been also grown by a flux method. The single-crystal X-ray diffraction analysis verifies that tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} has the garnet-related type structure with a space group of I4{sub 1}/acd (no. 142). The lattice constants are a=13.134(4) A and c=12.663(8) A. The garnet-type framework structure is composed of two types of dodecahedral LaO{sub 8} and octahedral ZrO{sub 6}. Li atoms occupy three crystallographic sites in the interstices of this framework structure, where Li(1), Li(2), and Li(3) atoms are located at the tetrahedral 8a site and the distorted octahedral 16f and 32g sites, respectively. The structure is also investigated by the Rietveld method with X-ray and neutron powder diffraction data. These diffraction patterns are identified as the tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} structure determined from the single-crystal data. The present tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} sample exhibits a bulk Li-ion conductivity of sigma{sub b}=1.63x10{sup -6} S cm{sup -1} and grain-boundary Li-ion conductivity of sigma{sub gb}=5.59x10{sup -7} S cm{sup -1} at 300 K. The activation energy is estimated to be E{sub a}=0.54 eV in the temperature range of 300-560 K. - Graphical abstract: Garnet-related Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} having tetragonal symmetry (I4{sub 1}/acd, no.142) has been successfully synthesized. Single crystals have been also grown by a flux method. The single-crystal X-ray diffraction analysis verifies that tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} has the garnet-related type structure with the lattice constants of a=13.134(4) A and c=12.663(8) A and the fully ordered arrangement of Li atoms.

36 MATERIALS SCIENCE↗