Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Permanent Magnets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

On the origin of magnetic anisotropy in 4f-free ferromagnets based on the CaCu 5 structure *

Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f-electron-free intermetallics with CaCu 5 -based structures: YCo 5 , YCo 4 B, and Y 3 Co 13 B 2 . The electronic structure of these compounds is characterized by a set of narrow 3d bands near the Fermi level. In YCo 5 the easy-axis anisotropy originates primarily in the spin–orbit coupling-induced mixing of the electronic states with Co d x 2 -y 2 and d xy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the k z = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the magnetocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Effect of alloying with Sc, Nb and Zr on reduction-diffusion synthesis of magnetically hard Sm(Fe,Co,Ti) 12 -based monocrystalline powders

Powders of Sm(Fe,Co) 11.2 Ti 0.8 alloys modified with Sc, Nb and Zr, as well as with additional Ti were prepared by reducing mechanically activated raw oxides with Ca metal in the furnace preheated to 990–1250 °C. Expansion of the crystal lattice upon introduction of Nb or additional Ti implies that atoms of these elements replace the smaller Fe atoms in the tetragonal ThMn 12 -type structure. On the other hand, contraction of the lattice upon introduction of Sc or Zr was smaller than what was expected for replacement of the Sm atoms, which suggests that the Sc and Zr atoms replace both the Sm and Fe atoms. Washing away the reduction byproducts expands the crystal lattice of the 1:12 particles and increases their coercivity. The lattice expansion associated with the washing is believed to be caused by interstitial H atoms; more research, however, is needed to establish the mechanism(s) of the washing effect on the coercivity. The earlier reported development of a high coercivity in zirconium-modified monocrystalline particles achieved by increasing the reduction annealing temperature to ≈1200 °C was similarly characteristic of the particles modified with Sc (the coercivity reaches 11.5 kOe) and Nb (8.1 kOe), but not for the particles prepared with additional Ti where the maximum coercivity of 8.3 kOe develops for a lower annealing temperature. Furthermore, it is concluded that Sc, Nb and Zr modify the high-temperature phase equilibria of the Sm(Fe,Co) 11.2 Ti 0.8 alloys allowing for an effective high-temperature processing, whereas the alloy coercivity increases with the synthesis temperature through a different, still unknown mechanism which may involve suppression of the defects specific to the 1:12 crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quadrupole wiggler for a collinear wakefield accelerator

A quadrupole wiggler consisting of a row of alternating-polarity permanent magnet-excited quadrupoles is used in a collinear wakefield accelerator under development at Argonne National Laboratory. Fine translational and angular adjustment mechanisms are implemented in all quadrupoles to obtain a better than 1−μ⁢m precision in the alignment of quadrupole wiggler assemblies. The quadrupole’s magnetic and mechanical designs are described. Two wiggler prototypes were fabricated, aligned, and characterized performing pulsed wire magnetic measurements. The sensitivity of the quadrupole wiggler alignment to the ambient temperature was measured.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Magnetic and mechanical properties of grain-refined Dy-free Nd-Fe-B sintered magnets

In this work, the effects of grain size on magnetic and mechanical properties of Dy-free Nd-Fe-B sintered magnets were studied. The grain size of the sintered magnets was varied by using different sized Dy-free Nd-Fe-B alloy feedstock powders which were ball milled to different extents. Increasing the ball milling time from 7 to 11 h caused the average particle size of the powders to decrease from 3.6 to 2.1 µm, while the average grain size of the corresponding sintered magnets decreased from 5.0 to 4.0 µm. The intrinsic coercivity Hcj and maximum energy product (BH) max of these magnets increased from 11.6 to 13.7 kOe and 41.6 to 43.6 MGOe, respectively. The finer grain magnets exhibited better thermal stability, as indicated by a smaller temperature coefficient of H cj (-0.71%/°C). With extending ball milling time to 15 h, the magnetic properties of the magnets deteriorate, while the flexural strengths first decrease and then increase. The flexural strength improvement is attributed to the increased Oxygen content in the magnets due to finer grains. The coercivity enhancement by reduction of grain size is a promising approach to develop Dy-free Nd-Fe-B sintered magnets with better thermal stability. It is important to control the Oxygen contents in the magnets to compromise both magnetic and mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Concept of circular-linear energy recovery accelerator to probe the energy frontier

Energy-frontier accelerators provide powerful tools performing high precision measurements confirming the fundamentals of the physics and broadening new research horizons. Such machines are either driven by circular or linear accelerators. The circular machines, having the centre-of-mass (CM) energy values reaching 200 GeV (for leptons) and above, experience beam energy loss and quality dilution, for example, due to synchrotron radiation, limiting the overall CM energy achievable and requiring a constant energy top-up to compensate the loss and the beam quality dilution. Linear colliders overcome these limitations, while the finite capabilities of generating high average current beams limits the luminosity. This is partially compensated by the quality of the colliding beams. In this work, we suggest a novel design of circular-linear accelerator based on the merging of the “non-emitting”, low-energy storage rings and energy recovery linear accelerators. We suggest using the recently considered dual-axis asymmetric cavities to enable the operation of such a system, and in particular the energy recovery from spent, high-intensity beams. The machine considered, under the scope of the SNOWMASS-2021 initiative, can be potentially used to reach ultimate energy frontiers in high-energy physics as well as to drive next generation light sources. The merging of circular and linear systems, and applications of dual axes cavities, should allow the maintaining of high beam quality, high luminosity, and high energy efficiency, while offering a flexible energy management and opening clear opportunity for reducing the running cost. We note that the numbers shown in the paper are for illustration purpose and can be improved further.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Optimization of a Packed Particle Magnetocaloric Refrigerator: A Combined Experimental and Theoretical Study

Magnetocaloric refrigeration has strong potential towards achieving high efficiency hydrogen liquefaction. Optimising parameters such as particle size and operating cycles can have a significant impact on liquefaction performance. Here, this work reports on a room temperature magnetocaloric refrigeration prototype designed with helium as the heat transfer fluid and packed particle Gd 0.8875 Ce 0.1025 Si 0.84 Cr 0.19 as the refrigerant. The temperature spans and cooling power with three different particle sizes at two different operating cycles were measured. A maximum temperature span of 16.7 K and a maximum cooling power of 8.6 W·kg –1 were obtained. Reduction of performance in the faster cycle was observed in larger particles due to insufficient thermal diffusion time and its implications for cryogenic temperatures are discussed. A numerical model was developed based on the experimentally observed variation of the temperature span and cooling power with particle size and cycle duration. This model was then used to study the competing effects of viscous dissipation and thermal diffusion for different particle sizes and cycle durations.

08 HYDROGEN↗
DOE OSTI2023

Medium grain niobium SRF cavity production technology for science frontiers and accelerator applications

Herein we present the cost-effective production of superconducting radio frequency (SRF) cavities made of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator in the science and industrial applications. The science applications require high field gradients(≥ 30 MV/m) particularly in pulsed mode. The industrial applications require high $Q_0$ values with moderate gradients (~ 20 MV/m) in CW mode operation. This paper describes the MG Nb disc production recently demonstrated and discusses future prospects for application in advanced particle accelerators in the science and industrial applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Technological developments and accelerator improvements for the FRIB beam power ramp-up

The Facility for Rare Isotope Beams (FRIB) began operation with 1 kW beam power for scientific users in May 2022 upon completion of 8 years of project construction. The ramp-up to the ultimate beam power of 400 kW, planned over a 6-year period, will enable the facility to reach its full potential for scientific discovery in isotope science and applications. In December 2023, a record-high beam power of 10.4 kW uranium was delivered to the target. Technological developments and accelerator improvements are being made over the entire facility and are key to completion of the power ramp-up. Major technological developments entail the phased deployment of high-power beam-intercepting systems, including the charge strippers, the charge selection systems, the production target, and the beam dump, along with support systems, including non-conventional utilities (NCU) and remote handling facilities. Major accelerator improvements include renovations to aging legacy systems associated with experimental beam lines and system automation for improved operational efficiency and better machine availability. Experience must be gained to safely handle the increased radiological impacts associated with high beam power; extensive machine studies and advanced beam tuning procedures are needed to minimize uncontrolled beam losses for the desired operating conditions. This paper discusses the technological developments and accelerator improvements with emphasis on major R&D efforts.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Engineering microstructure to improve coercivity of bulk MnBi magnet

MnBi is a candidate material for high-temperature magnets because of its increasing coercivity with increasing temperatures up to 255 °C. However, most efforts in fabricating bulk MnBi magnets have run into the problem of preserving the coercivity (H cj) of its feedstock powders. About 70% of powder’s H cj would be lost during the densification process. Our micromagnetic modeling shows that the coercivity mechanism of the MnBi bulk magnet is controlled by nucleation of the reversal magnetization domains, and the large H cj loss that occurred during the powder consolidation process can be attributed to the inter-grain magnetic coupling. To attain a high H cj , the grains in the MnBi bulk magnet must be separated with a non-magnetic grain boundary phase (GBP). To validate this GBP hypothesis, we engineered MnBi bulk magnets with two different types of GBP. The first type of GBP was created in-situ by precipitating excessive Bi from the grains; the second type was created ex-situ by coating silicates on the feedstock powders before the consolidation. While both GBP work, the ex-situ approach resulted in a better H cj due to a more uniform GBP distribution. We report the H cj loss was reduced from 70% to 15%, and the (BH)max of a warm sintered bulk magnet reached 8.9 MGOe.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unconventional ideas for ionization cooling of muons

Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high luminosity muon collider. In this paper we compare, for the first time, the amount of RF needed in a cooling channel to previous linacs. Here, we also outline three methods aimed to help achieve a final factor of 5 in 6D cooling.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Additive manufacturing of highly dense anisotropic Nd–Fe–B bonded magnets

Extrusion based big area additive manufacturing process is utilized for fabrication of dense anisotropic bonded magnets. High loading fraction (≥70 vol%) of magnequench anisotropic Nd–Fe–B powder in nylon is used for preparing anisotropic bonded magnets. A higher energy product of ~143.2 kJ/m 3 is obtained for the post printed magnetic field aligned at 1 Tesla. These findings make an important step towards the fabrication of gap magnets with energy product between ferrite and Nd–Fe–B sintered magnets. Finally, printed bonded magnets exhibited better thermal stability, mechanical properties and superior magnetic properties compared to commercial injection molded magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temperature dependent striction effect in a single crystalline Nd 2 Fe 14 B revealed using a novel high temperature resistivity measurement technique

In this work, we studied the temperature dependence of resistivity in a single crystalline Nd 2 Fe 14 B using a newly developed high temperature probe. This novel probe employs mechanical pin connectors instead of conducting glue/paste. From warming and cooling curves, the Curie temperature was consistently measured around T c = 580 K. In addition, anomalous discrete jumps were found only in cooling curves between 400 and 500 K, but not shown in warming curves. More interestingly, when the jumps occurred during cooling, the resistivity was increased. This phenomenon could possibly be due to a temperature dependent striction effect induced by the re-orientation of magnetic domains well below the Curie temperature. Further microscopic study is needed to confirm this effect.

permanent magnet↗
DOE OSTI2023

Status and future plans for C 3 R&D

C 3 is an opportunity to realize an e + e - collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C 3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C 3 is the main linac. This paper presents the staged approach towards a facility to demonstrate C 3 technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The primary goal of the C 3 Demonstration R&D Plan is to reduce technical and cost risk by building and operating the key components of C 3 at an adequate scale. This R&D plan starts with the engineering design, and demonstration of one cryomodule and will culminate in the construction of a 3 cryomodule linac with pre-production prototypes. This R&D program would also demonstrate the linac rf fundamentals including achievable gradient and gradient stability over a full electron bunch train and breakdown rates. It will also investigate beam dynamics including energy spread, wakefields, and emittance growth. This work will be critical to confirm the suitability of the C 3 beam parameters for the physics reach and detector performance in preparation for a Conceptual Design Report (CDR), as well as for follow-on technology development and industrialization. The C 3 Demonstration R&D Plan will open up significant new scientific and technical opportunities based on development of high-gradient and high-efficiency accelerator technology. It will push this technology to operate both at the GeV scale and mature the technology to be reliable and provide high-brightness electron beams. The timeline for progressing with C 3 technology development will be governed by practical limitations on both the technical progress and resource availability. It consists of four stages: Stage 0) Ongoing fundamental R&D on structure prototypes, damping and vibrations. Stage 1) Advancing the engineering maturity of the design and developing start-to-end simulations including space-charge and wakefield effects. This stage will include testing of strucutres operating at cryogenic temperatures. Beam tests would be performed with high beam current to test full beam loading. Stage 2) Production and testing of the first cryomodule at cryogenic temperatures. This would provide sufficient experimental data to compile a CDR and it is anticipated for Stage 2 to last 3 years and to culminate with the transport of photo-electrons through the first cryomodule. Stage 3) Updates to the engineering design of the cryomodules, production of the second and third cryomodule and their installation. Lower charge and lower emittance beams will be used to investigate emittance growth. The successful full demonstration of the 3 cryomodules to deliver up to a 3 GeV beam and achieve the C 3 five gradient will allow a comprehensive and robust evaluation of the technical design of C 3 as well as mitigate technical, schedule, and cost risks required to proceed with a Technical Design Report (TDR).

radiation hardened magnets↗
DOE OSTI2020

Heavy ion beam physics at Facility for Rare Isotope Beams

The Facility for Rare Isotope Beams (FRIB) will be the world's premier rare-isotope beam facility. Experiments with the majority (~80%) of the isotope predicted to exist will become available. The FRIB facility is based on a superconducting (SC) heavy ion linac with output energy above 200 MeV/u for any ions at beam power of 400 kW. FRIB includes a target facility for in-flight production of rare isotopes. A three-stage fragment separator will be used to prepare fast rare isotope beams with high-purity for nuclear physics experiments. The installation work of the accelerator and experimental systems is approaching completion and multi-stage beam commissioning activities started in summer 2017 with expected project completion in early 2022. In conclusion, the commencement of operation for users' experiments is planned immediately following the project completion.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Enhancement of hard magnetism and chemical order of synthetic L 1 0 -FeNi

An ordered tetragonal L 1 0 -FeNi, also known as meteoritic mineral tetrataenite – a promising rare-earth-free hard-magnetic compound – has been synthesized starting from a mechanochemically-activated disordered cubic A1-FeNi via formation of a chemically-ordered FeNiN intermediate and its subsequent denitrogenation and further purification of the product. The nature of a process control agent employed during the mechanochemical activation of A1-FeNi and ammonia flow velocity during the synthesis of the intermediate are two of the main factors controlling the nitrogenation. Denitrogenation with hydrogen at elevated pressures and at temperatures substantially below the order-disorder L 1 0 -FeNi → A1-FeNi transition preserves the chemical order established in the intermediate nitride. Further, post-synthesis refinement of the L 1 0 -FeNi product includes the removal of residual nitrides with a dilute acid to further improve hard-magnetic properties of the material. The L 1 0 -FeNi powders synthesized using this method exhibit a coercivity as high as 2.3 kOe and a maximum energy product reaching 6 MGOe – the highest values ever reported for a synthetic tetrataenite.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Crystal structure and magnetic properties of CeFe 11 M (M = Mo, W)

Tetragonal CeFe 11 Mo (struct. type ThMn 12 , a = 8.529(1) Å, c = 4.766(1) Å, V = 346.68(1) Å 3 ) and novel isostructural CeFe 11 W (a = 8.539(1) Å, c = 4.754(1) Å, V = 346.62(1) Å 3 ) are obtained in bulk, as homogenized single-phase arc-melted alloys. Here, their crystal structures are evaluated by full profile Rietveld analysis of the powder X-ray diffraction patterns which confirm that Ce occupies the 2a atomic site in both cases, whereas atomic disorder is present in the Fe-sublattice, i.e., predominantly on the dumbbell 8i site and minorly on two other sites 8j and 8f. In CeFe 11 Mo the third element, M, is mixed with Fe on the 8i dumbbell site and 8f atomic position, whereas in CeFe 11 W, M is mixed on the 8i and 8j Fe sites. In these bulk CeFe 12-x M x alloys the tetragonal structure persists at lower M content, x < 1 here, in comparison to known similar alloys, with x > 1. Because of the low M content, comparably higher values of mass magnetization and Curie temperature are achieved i.e., CeFe 11 Mo: ϭ s = 104 emu/g (14.7 µ B /f.u.), T c = 420 K and CeFe 11 W: ϭ s = 99 emu/g (16.5 µ B /f.u.), T c = 450 K. Magnetocrystalline anisotropy is uniaxial with anisotropy fields H a ∼ 14.5 and 16.5 kOe, respectively. Based on Curie temperature and magnetic anisotropy enhancements, using tungsten as the stabilizing dopant is more beneficial than molybdenum.

36 MATERIALS SCIENCE↗