Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter estimation using data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

An algorithmic calibration approach to identify globally optimal parameters for constraining the DayCent model

he accurate calibration of complex biogeochemical models is essential for the robust estimation of soil greenhouse gases (GHG) as well as other environmental conditions and parameters that are used in research and policy decisions. DayCent is a popular biogeochemical model used both nationally and internationally for this purpose. Despite DayCent’s popularity, its complex parameter estimation is often based on experts’ knowledge which is somewhat subjective. In this study we used the inverse modelling parameter estimation software (PEST), to calibrate the DayCent model based on sensitivity and identifi- ability analysis. Using previously published N2 O and crop yield data as a basis of our calibration approach, we found that half of the 140 parameters used in this study were the primary drivers of calibration dif- ferences (i.e. the most sensitive) and the remaining parameters could not be identified given the data set and parameter ranges we used in this study. The post calibration results showed improvement over the pre-calibration parameter set based on, a decrease in residual differences 79% for N2O fluxes and 84% for crop yield, and an increase in coefficient of determination 63% for N2O fluxes and 72% for corn yield. The results of our study suggest that future studies need to better characterize germination tem- perature, number of degree-days and temperature dependency of plant growth; these processes were highly sensitive and could not be adequately constrained by the data used in our study. Furthermore, the sensitivity and identifiability analysis was helpful in providing deeper insight for important processes and associated parameters that can lead to further improvement in calibration of DayCent model.

Corn yield↗

Statistical analyses of reservoir and fracturing parameters for a multifractured shale oil reservoir in Mississippi

The use of multifractured horizontal wells has improved the efficiency of hydrocarbon extraction from shale gas and oil plays. It is highly desirable to estimate the characteristics of the reservoir and well fracturing through production data analysis. Production rate transient data from 16 wells in the Mississippi sections were analyzed to estimate local reservoir permeability and hydraulic fracture parameters. Key factors affecting well productivity have been identified for optimizing future well completion. Based on the theory of distance of investigation during transient linear flow, the reservoir matrix permeability of TMS was estimated to be between 53 nd and 210 nd, averaging at 116 nd. The matrix permeability follows the lognormal distribution and is considered homogeneous according to the coefficient of variation. The fracture half-length was estimated using the matrix permeability data from the rate transient analysis. The fracture half-length was found to have a mean value of 234 ft with a standard deviation of 66 ft in a normal distribution. The fracture conductivity was back-calculated by matching pseudosteady production rate data to Guo et al's (SPE Reserve Eval Eng.12, 2009, 879) productivity model for boundary-dominated flow. The fracture conductivity was estimated to range from 0.4 md-ft to 3.2 md-ft, averaging at 1.4 md-ft. Based on Guo et al's (SPE Reserve Eval Eng.12, 2009, 879) well productivity model applied to TMS condition, well productivity can be improved significantly by increasing fracture length and conductivity. Future TMS wells should be completed with conductivity values of greater than 10 md-ft.

04 OIL SHALES AND TAR SANDS↗

Scale-Dependent Fracture-Matrix Interactions and Their Impact on Radionuclide Transport: Development of efficient particle-tracking methods

Matrix Diffusion and Adsorption within a rock matrix are important mechanisms for retarding transport of radionuclides in fractured rock. Due to computational limitations and difficulties in characterizing complex subsurface systems, diffusive exchange between a fracture network and surrounding rock matrix is often modeled using simplified conceptual representations. There is significant uncertainty in “effective” parameters used in these models, such as the “effective matrix diffusivity”. Often, these parameters are estimated by fitting sparse breakthrough data, and estimated values fall outside meaningful ranges, because simplified interpretive models do not consider complex three-dimensional flow. There is limited understanding of the relationship between the effective parameters and rock mass characteristics including network structure and matrix properties. There is also evidence for an apparent scale-dependence in “effective matrix diffusion” coefficients. These observations raise questions on whether fracture-matrix interaction parameters estimated from small-scale tracer tests can be used for predicting radionuclide fate and transport at the scale of DOE field sites. High-resolution three-dimensional Discrete-Fracture-Network-Matrix (DFNM) models based on well-defined local scale transport equations can help to address some of these questions. Due to tremendous advances in computational technology over the last 10 years, DFNM modeling in relatively large domains is now feasible. The overarching objective of our research is to use DFNM modeling to improve fundamental understanding of how effective parameters in conceptual models are related to fracture network structure and matrix properties. An advanced three-dimensional DFNM model is being developed, which combines upscaled particle-tracking algorithms for fracture-matrix interaction and a parallel fracture-network flow simulator. The particle-tracking algorithms allow complexity in flow fields at different scales, and track transport across fracture-matrix interfaces based on rigorous local approximations to the transport equations. This modeling approach can incorporate aperture variability, multi-scale preferential flow and matrix heterogeneity. We developed efficient particle-tracking methods for handling matrix diffusion and adsorption on fracture walls and demonstrated their efficiency for use within the context of large-scale complex fracture network models with variability in apertures across a network of fractures and within individual fractures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ambrosia: An R package for calculating and analyzing food demand that is responsive to changing incomes and prices

The ambrosia R package was developed to calculate food demand for staples and non-staple commodities that is responsive to changing levels of incomes and prices. ambrosia implements the framework to quantify food demand as established by Edmonds et al. (Edmonds et al. 2017) and allows the user to explore and estimate different variables related to the food demand system. Currently ambrosia provides 3 main functions: (1) calculation of food demand for any given set of parameters including income levels and prices (2) estimation of parameters within a given a dataset. Note: ambrosia is used to calculate parameters for the food demand model implemented in the Global Change Analysis Model(GCAM) (3) exploration and preparation of raw data before starting a parameter estimation

97 MATHEMATICS AND COMPUTING↗

Investigation of assumptions and approximations in the virtual fields method for a viscoplastic material model

The Virtual Fields Method (VFM) is an inverse technique used for parameter estimation and calibration of constitutive models. Many assumptions and approximations—such as plane stress, incompressible plasticity, and spatial and temporal derivative calculations—are required to use VFM with full-field deformation data, for example, from Digital Image Correlation (DIC). Here, this work presents a comprehensive discussion of the effects of these assumptions and approximations on parameters identified by VFM for a viscoplastic material model for 304L stainless steel. We generated synthetic data from a Finite-Element Analysis (FEA) in order to have a reference solution with a known material model and known model parameters, and we investigated four cases in which successively more assumptions and approximations were included in the data. We found that VFM is tolerant to small deviations from the plane stress condition in a small region of the sample, and that the incompressible plasticity assumption can be used to estimate thickness changes with little error. A local polynomial fit to the displacement data was successfully employed to compute the spatial displacement gradients. The choice of temporal derivative approximation (i.e., backwards difference versus central difference) was found to have a significant influence on the computed rate of deformation and on the VFM results for the rate-dependent model used in this work. Finally, the noise introduced into the displacement data from a stereo-DIC simulator was found to have negligible influence on the VFM results. Evaluating the effects of assumptions and approximations using synthetic data is a critical first step for verifying and validating VFM for specific applications. Finally, the results of this work provide the foundation for confidently using VFM for experimental data.

304L stainless steel↗

Quantifying uncertainty in material damage from vibrational data

The response of a vibrating beam to a force depends on many physical parameters including those determined by material properties. Damage caused by fatigue or cracks results in local reductions in stiffness parameters and may drastically alter the response of the beam. Data obtained from the vibrating beam are often subject to uncertainties and/or errors typically modeled using probability densities. The goal of this paper is to estimate and quantify the uncertainty in damage modeled as a local reduction in stiffness using uncertain data. We present various frameworks and methods for solving this parameter determination problem. We also describe a mathematical analysis to determine and compute useful output data for each method. We apply the various methods in a specified sequence that allows us to interface the various inputs and outputs of these methods in order to enhance the inferences drawn from the numerical results obtained from each method. Numerical results are presented using both simulated and experimentally obtained data from physically damaged beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistically-informed deep learning for gravitational wave parameter estimation

We introduce deep learning models to estimate the masses of the binary components of black hole mergers, $(m_1,m_2)$, and three astrophysical properties of the post-merger compact remnant, namely, the final spin, $a_\mathrm f$, and the frequency and damping time of the ringdown oscillations of the fundamental $\ell = m = 2$ bar mode, $(\omega_\mathrm R, \omega_\mathrm I)$. Our neural networks combine a modified WaveNet architecture with contrastive learning and normalizing flow. We validate these models against a Gaussian conjugate prior family whose posterior distribution is described by a closed analytical expression. Upon confirming that our models produce statistically consistent results, we used them to estimate the astrophysical parameters $(m_1,m_2, a_\mathrm f, \omega_\mathrm R, \omega_\mathrm I)$ of five binary black holes: GW150914, GW170104, GW170814, GW190521 and GW190630. We use PyCBC Inference to directly compare traditional Bayesian methodologies for parameter estimation with our deep learning based posterior distributions. Our results show that our neural network models predict posterior distributions that encode physical correlations, and that our data-driven median results and 90% confidence intervals are similar to those produced with gravitational wave Bayesian analyses. This methodology requires a single V100 NVIDIA GPU to produce median values and posterior distributions within two milliseconds for each event. Furthermore, this neural network, and a tutorial for its use, are available at the Data and Learning Hub for Science.

79 ASTRONOMY AND ASTROPHYSICS↗

Parametrization of Generalized Parton Distributions from 𝑡-Channel String Exchange in AdS Spaces

We introduce a string-based parametrization for nucleon quark and gluon generalized parton distributions (GPDs) that is valid for all skewness. Our approach leverages conformal moments, representing them as the sum of spin-𝑗 nucleon 𝐴-form factor and skewness-dependent spin-𝑗 nucleon 𝐷-form factor, derived from 𝑡-channel string exchange in AdS spaces consistent with Lorentz invariance and unitarity. This model-independent framework, satisfying the polynomiality condition due to Lorentz invariance, uses Mellin moments from empirical data to estimate these form factors. With just five Regge slope parameters, our method accurately produces various nucleon quark GPD types and symmetric nucleon gluon GPDs through pertinent Mellin-Barnes integrals. Our isovector nucleon quark GPD is in agreement with existing lattice data, promising to improve the empirical extraction and global analysis of nucleon GPDs in exclusive processes, by avoiding the deconvolution problem at any skewness, for the first time.

QCD phenomenology↗

Muon Neutrino Contained Disappearance in NOvA

The NO$\nu$ A experiment studies neutrino oscillations in the NuMI neutrino beam from Fermilab. NO$\nu$ A consists of two liquid scintillator tracking calorimeters placed 14 milliradians off-axis from the beam and 810 km apart. The NO$\nu$ A experiment started taking data in 2014. This thesis establishes the neutrino energy estimation procedures used to determine the oscillation parameters sin 2 θ 23 and Δm 2 32 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Robust initialization of 2D-3D image registration using the projection-slice theorem and phase correlation

Purpose: The image registration literature comprises many methods for 2D-3D registration for which accuracy has been established in a variety of applications. However, clinical application is limited by a small capture range. Initial offsets outside the capture range of a registration method will not converge to a successful registration. Previously reported capture ranges, defined as the 95% success range, are in the order of 4-11 mm mean target registration error. In this article, a relatively computationally inexpensive and robust estimation method is proposed with the objective to enlarge the capture range. Methods: The method uses the projection-slice theorem in combination with phase correlation in order to estimate the transform parameters, which provides an initialization of the subsequent registration procedure. Results: The feasibility of the method was evaluated by experiments using digitally reconstructed radiographs generated from in vivo 3D-RX data. With these experiments it was shown that the projection-slice theorem provides successful estimates of the rotational transform parameters for perspective projections and in case of translational offsets. The method was further tested on ex vivo ovine x-ray data. In 95% of the cases, the method yielded successful estimates for initial mean target registration errors up to 19.5 mm. Finally, the method was evaluated as an initialization method for an intensity-based 2D-3D registration method. The uninitialized and initialized registration experiments had success rates of 28.8% and 68.6%, respectively. Conclusions: The authors have shown that the initialization method based on the projection-slice theorem and phase correlation yields adequate initializations for existing registration methods, thereby substantially enlarging the capture range of these methods.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Convergence in simulating global soil organic carbon by structurally different models after data assimilation

Abstract Current biogeochemical models produce carbon–climate feedback projections with large uncertainties, often attributed to their structural differences when simulating soil organic carbon (SOC) dynamics worldwide. However, choices of model parameter values that quantify the strength and represent properties of different soil carbon cycle processes could also contribute to model simulation uncertainties. Here, we demonstrate the critical role of using common observational data in reducing model uncertainty in estimates of global SOC storage. Two structurally different models featuring distinctive carbon pools, decomposition kinetics, and carbon transfer pathways simulate opposite global SOC distributions with their customary parameter values yet converge to similar results after being informed by the same global SOC database using a data assimilation approach. The converged spatial SOC simulations result from similar simulations in key model components such as carbon transfer efficiency, baseline decomposition rate, and environmental effects on carbon fluxes by these two models after data assimilation. Moreover, data assimilation results suggest equally effective simulations of SOC using models following either first‐order or Michaelis–Menten kinetics at the global scale. Nevertheless, a wider range of data with high‐quality control and assurance are needed to further constrain SOC dynamics simulations and reduce unconstrained parameters. New sets of data, such as microbial genomics‐function relationships, may also suggest novel structures to account for in future model development. Overall, our results highlight the importance of observational data in informing model development and constraining model predictions.

54 ENVIRONMENTAL SCIENCES↗

MULTI-SCALE MORPHOLOGICAL ANALYSIS OF SDSS DR5 SURVEY USING THE METRIC SPACE TECHNIQUE

Following the novel development and adaptation of the Metric Space Technique (MST), a multi-scale morphological analysis of the Sloan Digital Sky Survey (SDSS) Data Release 5 (DR5) was performed. The technique was adapted to perform a space-scale morphological analysis by filtering the galaxy point distributions with a smoothing Gaussian function, thus giving quantitative structural information on all size scales between 5 and 250 Mpc. The analysis was performed on a dozen slices of a volume of space containing many newly measured galaxies from the SDSS DR5 survey. Using the MST, observational data were compared to galaxy samples taken from N-body simulations with current best estimates of cosmological parameters and from random catalogs. By using the maximal ranking method among MST output functions, we also develop a way to quantify the overall similarity of the observed samples with the simulated samples.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-I-95: Personalized Radiography Technical Parameters for Each Patient and Exam

Purpose: To determine exact electrical parameters (kV, mAs) a radiological technologist shall use taking account the exam and patient's structure, with guarantee of minimum dose and adequate quality image. Methods: A patient's absorbed dose equation was developed by means of Entrance Skin Dose (ESD), irradiated area and patient width for specific anatomy. ESD is calculated from a developed equation, where entrance surface air-KERMA and backscatter factor are included, with air-to-skin coefficient conversion. We developed specific Lambert-Beer attenuation equations derived from mass energy-absorption coefficients data for skin, fat, and muscle and bone as one tissue. Anatomy tissue thickness distribution at central X-ray location in anteroposterior incidence for hand and chest, was estimate by discounting constant skin and bone thickness from patient measured width, assuming the result as muscle and fat. A clinical research at a big hospital were executed when real parameters (kV, mAs, filtration, ripple) used by technologists were combined with the image quality and patient's data: anatomy width, height and weight. A correlation among the best images acquired and electrical parameters used were confronted with patient's data and dose estimation. The best combinations were used as gold standards. Results: For each anatomy, two equations were developed to calculate voltage (kV) and exposure (mAs) to reproduce and interpolate the gold standards. Patient is measured and data are input into equations, giving radiological technologists the right set of electrical parameters for that specific exam. Conclusion: This work indicates that radiological technologist can personalize the exact electrical parameters for each patient exam, instead of using standard values. It also guarantee that patients under or over-sized measures will receive the right dose for the best image. It will stop wrong empiric adjusts technologists do when examining a non-standard patient and reduce probability of radiography retaken because of over or under exposition.

60 APPLIED LIFE SCIENCES↗

Modeling Substrate Utilization, Metabolite Production, and Uranium Immobilization in Shewanella oneidensis Biofilms

In this study, we developed a two-dimensional mathematical model to predict substrate utilization and metabolite production rates in Shewanella oneidensis MR-1 biofilm in the presence and absence of uranium (U). In our model, lactate and fumarate are used as the electron donor and the electron acceptor, respectively. The model includes the production of extracellular polymeric substances (EPS). The EPS bound to the cell surface and the EPS distributed in the biofilm were considered bound EPS (bEPS) and loosely associated EPS (laEPS), respectively. COMSOL ® Multiphysics finite element analysis software was used to solve the model numerically (model file provided in the Supplementary Material). The input variables of the model were the lactate and fumarate concentrations, cell density, EPS density, half saturation constant for fumarate, and diffusion coefficients of the substrates and metabolites. To estimate unknown parameters and calibrate the model, we used a custom designed biofilm reactor placed inside a nuclear magnetic resonance (NMR) microimaging and spectroscopy system and measured substrate utilization and metabolite production rates. From these data we estimated the yield coefficients, maximum substrate utilization rate, half saturation constant for lactate, stoichiometric ratio of fumarate and acetate to lactate and stoichiometric ratio of succinate to fumarate. These parameters are critical to predicting the activity of biofilms and are not available in the literature. Lastly, the model was used to predict uranium immobilization in S. oneidensis MR-1 biofilms by considering reduction and adsorption processes in the cells and in the EPS. We found that the majority of immobilization was due to cells, and that EPS were less efficient at immobilizing U. Furthermore, most of the immobilization occurred within the top 10 µm of the biofilm. To the best of our knowledge, this research is one of the first biofilm immobilization mathematical models based on experimental observation. It has the ability to predict the relative contributions to U immobilization of laEPS, bEPS and cells.

59 BASIC BIOLOGICAL SCIENCES↗

A Machine Learning Based System Performance Prediction Model for Transportable FHR

A machine learning based system performance prediction model is currently created to support the development of autonomous control for small reactors, such as the Transportable Fluoride-salt-cooled High-temperature Reactor (TFHR), which has a 20 MWth compact core proposed by MIT for remote sites. The prediction model is constructed using support vector regression (SVR) with training data generated by RELAP5. A particle filtering framework is utilized to estimate and update model parameters with instrument measurements. Verifications of the prediction and filtering models have been carried out using TFHR reactivity insertion cases. Satisfactory performance in predicting the core behavior and in recognizing the inserted reactivity rate is concluded. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

THE BENEFITS OF VLBI ASTROMETRY TO PULSAR TIMING ARRAY SEARCHES FOR GRAVITATIONAL RADIATION

Precision astrometry is an integral component of successful pulsar timing campaigns. Astrometric parameters are commonly derived by fitting them as parameters of a timing model to a series of pulse times of arrival (TOAs). TOAs measured to microsecond precision over spans of several years can yield position measurements with sub-milliarcsecond precision. However, timing-based astrometry can become biased if a pulsar displays any red spin noise or a red signal produced by the stochastic gravitational wave background. We investigate how noise of different spectral types is absorbed by timing models, leading to significant estimation biases in the astrometric parameters. We find that commonly used techniques for fitting timing models in the presence of red noise (Cholesky whitening) prevent the absorption of noise into the timing model remarkably well if the time baseline of observations exceeds several years, but are inadequate for dealing with shorter pulsar data sets. Independent of timing, pulsar-optimized very long baseline interferometry (VLBI) is capable of providing position estimates precise to the sub-milliarcsecond levels needed for high-precision timing. In order to make VLBI astrometric parameters useful in pulsar timing models, the transformation between the International Celestial Reference Frame (ICRF) and the dynamical solar system ephemeris used for pulsar timing must be constrained to within a few microarcseconds. We compute a transformation between the ICRF and pulsar timing frames and quantitatively discuss how the transformation will improve in coming years. We find that incorporating VLBI astrometry into the timing models of pulsars for which only a couple of years of timing data exist will lead to more realistic assessments of red spin noise and could enhance the amplitude of gravitational wave signatures in post-fit timing residuals by factors of 20 or more.

79 ASTRONOMY AND ASTROPHYSICS↗

Use of Satellite, Surface Observations and Numerical Weather Prediction Model Data to Improve Cloud Base Height and Cloud Base Vertical Velocity Estimation

Cloud base height (CBH) and cloud base vertical velocity (CBVV) are important variables that impact the overall climate in a region as they influence the formulation, longevity, and evolution of clouds. Retrieval of both parameters have long used ground instrumentation (e.g., Doppler lidar (DL), ground base radar); however, retrieving CBH from satellites is particularly challenging given that space-based instruments only observe cloud tops. In this manuscript, CBH is retrieved using a multi-linear regression equation, while CBVV used a random forests model. Both retrievals combine satellite and numerical weather prediction data. The satellite data used are the Visible Infrared Imaging Radiometer Suite imagery, while measurements of CBH and CBVV include DL and radiosonde data at the Southern Great Plains (SGP) Atmospheric Radiation Measurement observatory. Data from 83 summer days (May-August) in 2018–2021 featuring cumulus clouds forced by solar heating were examined and used to train the models, with years 2022–2023 used for validation. Various spatial domains were defined with one large (2.4° longitude by 2.0° latitude) SGP domain being split into smaller sections (smallest being 0.99° and 0.61° longitude and latitude respectably). CBH and CBVV values obtained from the DL as compared to the models show root mean square errors between 150 and 200 m, with CBVV values between 0.45 and 1 ms -1 . Finally, it was found that the CBH formulation performs well over all domains, while the CBVV retrievals become less accurate due to more turbulence being introduced into the observations as the number of DL stations decreases in the smaller domains.

54 ENVIRONMENTAL SCIENCES↗

Scaled Vecchia Approximation for Fast Computer-Model Emulation

Many scientific phenomena are studied using computer experiments consisting of multiple runs of a computer model while varying the input settings. Gaussian processes (GPs) are a popular tool for the analysis of computer experiments, enabling interpolation between input settings, but direct GP inference is computationally infeasible for large datasets. We adapt and extend a powerful class of GP methods from spatial statistics to enable the scalable analysis and emulation of large computer experiments. Specifically, we apply Vecchia’s ordered conditional approximation in a transformed input space, with each input scaled according to how strongly it relates to the computer-model response. The scaling is learned from the data by estimating parameters in the GP covariance function using Fisher scoring. Our methods are highly scalable, enabling estimation, joint prediction, and simulation in near-linear time in the number of model runs. In several numerical examples, our approach substantially outperformed existing methods.

97 MATHEMATICS AND COMPUTING↗