Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

An experimental investigation to determine the effect of window cooling by mass injection for the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment

The effect of mass injection on the shuttle infrared leeside temperature sensing (SILTS) pod window surfaces in reducing window heating and minimizing window lens radiation during the reentry data taking period is investigated. Heat transfer coefficients on and around the simulated windows and window cavities are determined. Heat transfer rates and window coolant flow rates are reported for the SILTS configuration. A comparison of two windows' geometries and their effects on the heat transfer rate is discussed and oil flow photographs are presented to indicate how mass injection affects the flow field near the SILTS window.

Bradley, P. F.↗
NASA NTRS1980

Computerized systems analysis and optimization of aircraft engine performance, weight, and life cycle costs

The computational techniques are described which are utilized at Lewis Research Center to determine the optimum propulsion systems for future aircraft applications and to identify system tradeoffs and technology requirements. Cycle performance, and engine weight can be calculated along with costs and installation effects as opposed to fuel consumption alone. Almost any conceivable turbine engine cycle can be studied. These computer codes are: NNEP, WATE, LIFCYC, INSTAL, and POD DRG. Examples are given to illustrate how these computer techniques can be applied to analyze and optimize propulsion system fuel consumption, weight and cost for representative types of aircraft and missions.

Fishbach, L. H.↗
NASA NTRS1979

Computerized systems analysis and optimization of aircraft engine performance, weight, and life cycle costs

The paper describes the computational techniques employed in determining the optimal propulsion systems for future aircraft applications and to identify system tradeoffs and technology requirements. The computer programs used to perform calculations for all the factors that enter into the selection process of determining the optimum combinations of airplanes and engines are examined. Attention is given to the description of the computer codes including NNEP, WATE, LIFCYC, INSTAL, and POD DRG. A process is illustrated by which turbine engines can be evaluated as to fuel consumption, engine weight, cost and installation effects. Examples are shown as to the benefits of variable geometry and of the tradeoff between fuel burned and engine weights. Future plans for further improvements in the analytical modeling of engine systems are also described.

Fishbach, L. H.↗
NASA NTRS1981

Application of Computer Axial Tomography (CAT) to measuring crop canopy geometry

The feasibility of using the principles of computer axial topography (CAT) to quantify the structure of crop canopies was investigated because six variables are needed to describe the position-orientation with time of a small piece of canopy foliage. Several cross sections were cut through the foliage of healthy, green corn and soybean canopies in the dent and full pod development stages, respectively. A photograph of each cross section representing the intersection of a plane with the foliage was enlarged and the air-foliage boundaries delineated by the plane were digitized. A computer program was written and used to reconstruct the cross section of the canopy. The approach used in applying optical computer axial tomography to measuring crop canopy geometry shows promise of being able to provide needed geometric information for input data to canopy reflectance models. The difficulty of using the CAT scanner to measure large canopies of crops like corn is discussed and a solution is proposed involving the measurement of plants one at a time.

Bauer, M. E.↗
NASA NTRS1982

Cardiovascular responses of the chronically instrumented monkey during simulated space flight

A pod enclosure system designed by the Environmental Physiology Laboratory at the University of California at Berkeley is found to be eminently suitable for work with monkeys. The pattern of cardiovascular activity is found to vary. In the first half of the exposure, the hourly mean values suggest an initial period of instability, most marked for heart rate, beginning at 'launch.' In the second half of the exposure, the final three days, the responses appear much more ordered, with a stable phase relationship between circadian shifts in heart rate and mean aortic pressure. Since the latter stability is more normal, the assumption is made that the animal had become adjusted to its situation. Imposition of a daily lower body negative pressure (LBNP) stress shows characteristic responses.

Mccutcheon, E. P.↗
NASA NTRS1983

Structural response of transport airplanes in crash situations

This report highlights the results of contractural studies of transport accident data undertaken in a joint research program sponsored by the FAA and NASA. From these accident data studies it was concluded that the greatest potential for improved transport crashworthiness is in the reduction of fire related fatalities. Accident data pertaining to fuselage integrity, main landing gear collapse, fuel tank rupture, wing breaks, tearing of tank lower surfaces, and engine pod scrubbing are discussed. In those accidents where the energy absorbing protective capability of the fuselage structure is expended and the airplane experiences major structural damage, trauma caused fatalities are also discussed. The dynamic performance of current seat/restraint systems are examined but it is concluded that the accident data does not adequately define the relationship between occupant response and the dynamic interaction with the seat, floor and fuselage structure.

Thomson, R. G.↗
NASA NTRS1985

Strong, Lighweight Curved Panels

Sandwich construction gives panels structural efficiency. Large panels with compound curvatures are formed from a honeycomb core faced with sheets of graphite/epoxy cloth and tape. Developed for pod on Space Shuttle, construction readily adapted to curved skin panels on cars, trucks, and airplanes.

Molho, R.↗
NASA NTRS1983

Effect of thrust vectoring and wing maneuver devices on transonic aeropropulsive characteristics of a supersonic fighter

The aeropropulsive characteristics of an advanced fighter designed for supersonic cruise were determined in the Langley 16-Foot Transonic Tunnel. The objectives of this investigation were to evaluate the interactive effects of thrust vectoring and wing maneuver devices on lift and drag and to determine trim characteristics. The wing maneuver devices consisted of a drooped leading edge and a trailing-edge flap. Thrust vectoring was accomplished with two dimensional (nonaxisymmetric) convergent-divergent nozzles located below the wing in two single-engine podded nacelles. A canard was utilized for trim. Thrust vector angles of 0 deg, 15 deg, and 30 deg were tested in combination with a drooped wing leading edge and with wing trailing-edge flap deflections up to 30 deg. This investigation was conducted at Mach numbers from 0.60 to 1.20, at angles of attack from 0 deg to 20 deg, and at nozzle pressure ratios from about 1 (jet off) to 10. Reynolds number based on mean aerodynamic chord varied from 9.24 x 10 to the 6th to 10.56 x 10 to the 6th.

Capone, F. J.↗
NASA NTRS1983

Test Report for MSFC Test No. 83-2: Pressure scaled water impact test of a 12.5 inch diameter model of the Space Shuttle solid rocket booster filament wound case and external TVC PCD

Water impact tests using a 12.5 inch diameter model representing a 8.56 percent scale of the Space Shuttle Solid Rocket Booster configuration were conducted. The two primary objectives of this SRB scale model water impact test program were: 1. Obtain cavity collapse applied pressure distributions for the 8.56 percent rigid body scale model FWC pressure magnitudes as a function of full-scale initial impact conditions at vertical velocities from 65 to 85 ft/sec, horizontal velocities from 0 to 45 ft/sec, and angles from -10 to +10 degrees. 2. Obtain rigid body applied pressures on the TVC pod and aft skirt internal stiffener rings at initial impact and cavity collapse loading events. In addition, nozzle loads were measured. Full scale vertical velocities of 65 to 85 ft/sec, horizontal velocities of 0 to 45 ft/sec, and impact angles from -10 to +10 degrees simulated.

Source record↗
NASA NTRS1984

Evaluation of a flow direction probe and a pitot-static probe on the F-14 airplane at high angles of attack and sideslip

The measurement performance of a hemispherical flow-angularity probe and a fuselage-mounted pitot-static probe was evaluated at high flow angles as part of a test program on an F-14 airplane. These evaluations were performed using a calibrated pitot-static noseboom equipped with vanes for reference flow direction measurements, and another probe incorporating vanes but mounted on a pod under the fuselage nose. Data are presented for angles of attack up to 63, angles of sideslip from -22 deg to 22 deg, and for Mach numbers from approximately 0.3 to 1.3. During maneuvering flight, the hemispherical flow-angularity probe exhibited flow angle errors that exceeded 2 deg. Pressure measurements with the pitot-static probe resulted in very inaccurate data above a Mach number of 0.87 and exhibited large sensitivities with flow angle.

Larson, T. J.↗
NASA NTRS1984

Results of the AFRSI detailed-environment test of the 0.035-scale SSV pressure-loads model 84-0 in the Ames 11x11 ft. TWT and the Lewis 8x6 ft. and 10x10 ft. SWT (OA-310A, B, C), volume 1

Detailed orbiter aerodynamic and aeroacoustic pressure data were obtained in a three-part experimental investigation (OA-310A, B and C). The tests were conducted in three NASA facilities: OA-310A in the Ames 11x11-foot Transonic Wind Tunnel; OA-310B in the Lewis 8x6-foot Supersonic Wind Tunnel; and OA-310C in the Lewis 10x10-foot Supersonic Wind Tunnel. Test data were obtained to support analysis of the Space Transportation System (STS)-6 advanced flexible reusable surface insulation (AFRSI) anomaly using the 0.035-scale space shuttle vehicle pressure-loads Model 84-0. Data were obtained in the areas of the orbiter where AFRSI is to be applied to OV-099 and OV-103. Emphasis was placed on acquiring detailed aeroacoustic data and time-averaged pressure distributions on five affected areas: (1) canopy; (2) side of fuselage; (3) upper surface of wing; (4) OMS pods; and (5) vertical tail. Data were obtained at nominal ascent and entry atmospheric flight trajectory conditions between M=0.6 through M-3.5. Sample plotted data are given. aba M.G.

Marshall, B. A.↗
NASA NTRS1984

Nonlinear computation of wing-body-vertical tail-wake flows at low supersonic speeds

A numerical method based on the conservation form of the full potential equation has been applied to the problem of three-dimensional supersonic flows with embedded subsonic regions. The governing equation is cast in a nonorthogonal coordinate system, and the theory of characteristics is used to accurately monitor the type-dependent flow field. A conservative switching scheme is employed to transition from the supersonic marching procedure to a subsonic relaxation algorithm and vice versa. The newly developed computer program can handle arbitrary geometries with fuselage, wing, vertical tail and wake components at combined angle of attack and sideslip. Results are presented for a low supersonic Mach numbers flow over the Shuttle orbiter (including the OMS pods and vertical tail), and for flows over a realistic fighter type configuration. Comparisons with experimental data are shown to be in good agreement for various cases.

Szema, K.-Y.↗
NASA NTRS1984

Validation of a transonic analysis code for use in preliminary design of advanced transport configurations

The WBPPW code has the capability of analyzing flow-field effects about configurations which include wing pylons and engine nacelles or pods in addition to the basic wing/fuselage combination. Using the concept of grid embedding, the code solves the extended small disturbance transonic flow equation for complex flow interactions of the various configuration components. A general description of the code and solution algorithm is included. Results are presented and compared with experiment for various configurations which encompass the code capabilities. These include wing planform and wing contour modifications and variations in nacelle position beneath a high-aspect-ratio wing. Results are analyzed in the light of preliminary design, where the capability to accurately compute flow-field effects resulting from various configuration perturbations is important. The comparisons show that the computational results are sensitive to subtle design modifications and that the code could be used as an effective guide during the design process for transport configurations.

Waggoner, E. G.↗
NASA NTRS1984

Columbia: The first 5 flights entry heating data series. Volume 1: An overview

Entry heating flight data and wind tunnel data on the lower windward and upper lee side centerline, lower wing 50% and 80% semi-spans, side fuselage and payload bay door, Z-400 and 440 trace aft of X/L=0.2, and OMS Pod trace 3, are presented for the first five flights of the space shuttle orbiter. Heating rate distributions are presented in terms of normalized shock Reynolds number to show the sensitivity of heating to these parameters. The surface heating rates and temperatures were obtained via the JSC NONLIN/INVERSE computer program.

Williams, S. D.↗
NASA NTRS1985

Orbital Maneuvering system design evolution

Preliminary design considerations and changes made in the baseline space shuttle orbital maneuvering system (OMS) to reduce cost and weight are detailed. The definition of initial subsystem requirements, trade studies, and design approaches are considered. Design features of the engine, its injector, combustion chamber, nozzle extension and bipropellant valve are illustrated and discussed. The current OMS consists of two identical pods that use nitrogen tetroxide (NTO) and monomethylhydrazine (MMH) propellants to provide 1000 ft/sec of delta velocity for a payload of 65,000 pounds. Major systems are pressurant gas storage and control, propellant storage supply and quantity measurement, and the rocket engine, which includes a bipropellant valve, an injector/thrust chamber, and a nozzle. The subsystem provides orbit insertion, circularization, and on orbit and deorbit capability for the shuttle orbiter.

Gibson, C.↗
NASA NTRS1985

Data-link alternatives for the NASA pilot data systems

There are several preliminary, or pilot, efforts for developing data systems for supporting NASA science research. The Pilot Data Systems consist of the Pilot Land Data System (PLDS), the Pilot Ocean Data System (PODS), the Pilot Climate Data System (PCDS), and the Pilot Planetary Data System (PPDS). The PLDS is likely to have the greatest communication needs of the various pilots. Communications issues and requirements are examined in the context of the mature PLDS as it may exist by 1990. The PLDS is seen as a distributed processing system linking resources at a number of NASA research centers and outside universities. Large image data sets, including LANDSAT scenes, are a major data type to be moved along the PLDS communications network. The unusually large size of these data files requires examining new technologies that may allow efficient and affordable communication at rates of up to 60 megabits per second. Potentially useful developments include portable satellite ground stations, and time division multiple access for sharing high-speed satellite links. Further pooling of communications for the various data systems into a single network would reduce costs and may make economic justification of access to the required data rates possible.

Likens, W. C.↗
NASA NTRS1985

Space vehicle glow measurements on STS 41-D

A flight experiment using a hand-held, image-intensified spectrographic camera was performed on mission 41-D. The instrument enabled the photographic documentation of the position of the spectral slit on the image to be subjected to spectrographic analysis. Because of this instrument feature, the spectrum of the glow on the Shuttle tail pod could be clearly separated from spectrum of the scattered light from the Orbiter. From the measurements it is clear that the spectrum of the glow is a continuum in the passband of the instrument between 4200 A and 8000 A. The measured spectral resolution of the instrument was 35 A. The scattered light from the Orbiter surfaces distinctly show the components of the earth's airglow at 5577 A and 7620 A. On the same flight material samples were also carried by the Orbiter attached to the Remote Manipulating System arm. These samples were representative of the material overcoatings used on the space telescope. The altitude of the 41-D flight was 290 km, instead of the 220 km which was originally planned for this experiment. The signal to noise ratio in the material glow discrimination experiment was quite low. This made it difficult to draw strong conclusions regarding the glow propensity of the materials. Nevertheless it was clear that polyethylene produces a very weak glow, while most black overcoating materials produce significant glow. MgF2 was also found to produce a relatively intense glow.

Mende, S. B.↗
NASA NTRS1985

Ram vehicle glow spectrum - Implication of NO2 recombination continuum

An experiment was operated on several Space Shuttle missions to provide spatial and spectral distributions of a ram glow associated with the Orbiter. The most recent data featured resolved spectrum and imagery of the glow with spectroscopic resolution of 34 A FWHM between 4000 and 8000 A. The spectrum of the glow on the Shuttle tail pod could be clearly separated from spectrum of the reflected light from the Orbiter. Analysis and comparison have been performed which strongly suggest the emission originates from recombination continuum of NO2. Both fast recombination (high temperature) and the spectral dependence in lifetime can describe the spectral difference. If the recombined NO2 retains 25 percent of the kinetic energy of the ram OI, the thickness of the glow layer can be explained by the lifetime of NO2 (2B1) recombination emission.

Swenson, G. R.↗