Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PH VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Corrosion behavior in aluminum/galvanized steel resistance spot welds and self-piercing riveting joints in salt spray environment

Here, this paper underlined the corrosion behavior of aluminum alloy/galvanized steel joints fabricated by resistance spot welding (RSW) and self-piercing riveting (SPR) exposed to different salt-spray cycles. It was found that the crevice generated by different joining methods has an important impact on corrosion behavior. Compared with the RSW joint, less corrosion happened on the coupled regions in SPR joints because of the higher local pH value resulted from the smaller crevice. The crevice, however, has less impact on the types of corrosion products. Galvanic corrosion happened in the coupled region for both RSW and SPR joints. The Pourbaix diagram explained the stable corrosion products of Al and Zn—Fe alloy, which are Al 2 O 3 , ZnO, and Fe 3 O 4 . Additional corrosion products observed from the experiment included α-Al(OH) 3 , Ca 4 Al 2 (CO 3 )(OH) 12 (H 2 O) 5 , Zn 5 (OH) 8 Cl 2 (H 2 O), Zn 5 (CO 3 ) 2 (OH) 6 , and Fe 2 (OH) 2 (CO 3 ), which can be understood by considering the metastable corrosion products, Pourbaix diagram, and possible chemical reactions.

36 MATERIALS SCIENCE↗

A polyoxometalate flow battery

A redox flow battery utilizing two, three-electron polyoxometalate redox couples (SiV V 3 W VI 9 O 40 7– /SiV IV 3 W VI 9 O 40 10- and SiV IV 3 W VI 9 O 40 10- /SiV IV 3 W V 3 W VI 6 O 40 13- ) was investigated for use in stationary storage in either aqueous or non-aqueous conditions. The aqueous battery had coulombic efficiencies greater than 95% with relatively low capacity fading over 100 cycles. Infrared studies showed there was no decomposition of the compound under these conditions. The non-aqueous analog had a higher operating voltage but at the expense of coulombic efficiency. The spontaneous formation of these clusters by self-assembly facilitates recovery of the battery after being subjected to reversed polarity. Polyoxometalates offer a new approach to stationary storage materials because they are capable of undergoing multi-electron reactions and are stable over a wide range of pH values and temperatures.

25 ENERGY STORAGE↗

Influence of synthesis condition on product formation: hydrothermal auto-oxidated synthesis of five copper halides with ratio of Cu(I)/Cu(II) in 1:1, 2:1, 3:1, 4:1 and 1:0

The hydrothermal synthesis and structural characterization of five copper iodides derived from chelated ligands, 1, 10-phenanthroline (phen), ethylenediamine (en) and 1, 3-propanediamine, are reported. Except monovalent copper compound 1 ((phen)Cu{sub 3}I{sub 3}1), other four compounds ([Cu(phen){sub 2}I][CuI{sub 2}] 2, [Cu(phen){sub 2}I][Cu{sub 3}I{sub 4}] 3, [Cu(en){sub 2}][Cu{sub 4}(phen){sub 2}I{sub 6}] 4 and [Cu(1, 3-propanediamine){sub 2}][CuI{sub 2}]{sub 2}5) are mixed-valent Cu(I)-Cu(II) compounds by partially auto-oxidated from Cu(I). Supramolecular frameworks of these compounds can be assembled by C/N-H...I hydrogen bonds, Cu(I)-Cu(I) interaction, weak Cu-I semicoordinate interaction, C-H...{pi} and {pi}-{pi} stacking interactions. It's noteworthy that we find hydrothermal synthesis under higher pH value, higher synthesis temperature and longer reaction time can obtain higher ratio of Cu(I)/Cu(II) copper iodides and organic ligand with lower steric hinderance is prone to coordinated with divalent copper to form cation unit. Finally, the fluorescent study shows 1 exhibits intense orange-red luminescence with long lifetime at 293 K and more intense emission and longer lifetime at 77 K. Moreover, the room temperature EPR spectra of above five compounds not only show the valence of copper but demonstrate the coordination environment of Cu(II) centre. - Graphical abstract: The influence of hydrothermal synthesis condition on the ratio of Cu(I)/Cu(II) of five copper iodides, with 1:0, 1:1, 3:1, 4:1, 2:1, respectively, is deduced and the rivalrousness of 1,10-phenanthroline, ethylenediamine and 1, 3-propanediamine is discussed as well. The fluorescent study shows 1 exhibits intense orange-red luminescence with long lifetime ({tau}=1.25 {mu}s) at 293 K and more intense emission and longer lifetime({tau}=6.95 {mu}s) at 77 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structures and luminescent properties of two 4d-4f Ln-Ag heterometallic coordination polymers based on anion template

Two new 4d-4f Ln-Ag heterometallic coordination polymers, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been synthesized under hydrothermal conditions by reactions of Ln{sub 2}O{sub 3}, AgNO{sub 3}, HIN and HClO{sub 4}, and characterized by elemental analysis, IR, thermal analysis and single-crystal X-ray diffraction. It is proved that HClO{sub 4} not only adjusts the pH value of the reaction mixture, but also acts as anion template. The structure determination reveals that 1 and 2 are isostructural and feature a novel two-dimensional (2D) layered hetrometallic structure constructed from one-dimensional Ln-carboxylate chains and pillared Ag(IN){sub 2} units. The 2D layers are further interlinked through Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions, which form a rare Ag-ClO{sub 4} ribbon in lanthanide-transition metal coordination polymers, to give rise to a three-dimensional supramolecular architecture. Moreover, the luminescent properties of these two compounds have also been investigated at room temperature. -- Graphical abstract: Two new anion-templated 2D 4d-4f Ln-Ag heterometallic coordination polymers based on novel lanthanide-carboxylate chains and pillared Ag(IN){sub 2} units, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been hydrothermally synthesized and structurally characterized. 1 and 2 exhibit good luminescent properties. Display Omitted Research highlights: > Two 2D Eu (Sm)-Ag coordination polymers templated by perchlorate anion have been synthesized. > Polymers consist of novel 1D lanthanide-carboxylate chains. > In both structures, there are rare Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions. > Both compounds exhibit good luminescent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable synthesis and characterization of cobalt sodium tartrate nanowires with adjustable diameters

Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal method using ethanol-water mixed solvents. The smooth wires are on average 30 {mu}m long. Their diameters are narrowly size distributed with a controllable average in the range from 80 to 250 nm. Interestingly, after the initial two hours, the diameter decreases with further reaction time. The tartrate anions act as coordination ligands with all six oxygen atoms participating in the coordination. The Co{sup 2+} and Na{sup +} ions chelate with the O atoms from the carboxylate and hydroxyl groups in the tartrate ligands. The ethanol participates in the formation of pi bonds. The cobalt is divalent while the sodium is monovalent in their tartrates. The respective crystal structures of these metal tartrates are incompatible, and the wires are therefore amorphous. The influence of the reaction time, sodium tartrate concentration, pH value, and the ethanol water ratio are studied in detail. - Graphical abstract: Cobalt sodium tartrate nanowires with smooth surfaces are synthesized hydrothermally. Their narrowly distributed diameters decrease with reaction time after initial two hours and are controllable from 80 to 250 nm. Highlights: > Cobalt sodium tartrate nanowires are synthesized by a simple hydrothermal route. > Nanowires are smooth, amorphous, and up to 30 {mu}m long. > Diameters of the wires are controllable; they decrease with the reaction time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of lutetium disilicate nanoparticles

A simple, low-cost hydrothermal method was developed to synthesize irregular-and rod-shaped lutetium disilicate (Lu{sub 2}Si{sub 2}O{sub 7}) powders with sizes ranging from 71 to 340 nm. The synthesis temperature was 260 Degree-Sign C, which is nearly 1300 Degree-Sign C lower than that required for the solid-state reaction. The results indicated that both the hydrothermal temperature and pH values had great influences on the composition, crystalline phase and morphology of the powders. The formation mechanism, basic thermophysical properties, stability and anticorrosion properties of the Lu{sub 2}Si{sub 2}O{sub 7} powders were also investigated. The obtained powders possessed low thermal conductivity, a suitable thermal expansion coefficient (3.92-5.17 Multiplication-Sign 10{sup -6} K{sup -1}) with the silicon-based substrate and excellent thermal and structural stability. During hot corrosion testing, the surfaces of the samples appeared to react with the water and molten salt vapors, but no serious failure occurred. - Graphical abstract: An image for the as-prepared Lu{sub 2}Si{sub 2}O{sub 7} powders (left) and XRD pattern (right) (inset shows the SEM graph of powders). Highlights: Black-Right-Pointing-Pointer We synthesized Lu{sub 2}Si{sub 2}O{sub 7} powders via a hydrothermal process at 260 Degree-Sign C. Black-Right-Pointing-Pointer Crystalline phase and morphology of the powders changed with experimental parameter. Black-Right-Pointing-Pointer Hot corrosion was determined in an airflow environment containing alkaline vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and luminescent properties of NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} phosphor

Pompon-like NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} phosphors have been successfully prepared via a hydrothermal method using ammonia as pH value regulator. The hydrothermal process was carried out under aqueous condition without the use of any organic solvent, surfactant, and catalyst. The experimental results demonstrate that the obtained NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} phosphor powders are single-phase scheelite structure with tetragonal symmetry. Moreover, the phosphor under the excitation of 390 and 456 nm exhibited blue emission (486 nm) and yellow emission (574 nm), corresponding to the {sup 4}F{sub 9/2}{yields}{sup 6}H{sub 15/2} transition and {sup 4}F{sub 9/2}{yields}{sup 6}H{sub 13/2} transition of Dy{sup 3+} ions, respectively. In addition, the yellow-to-blue emission intensity ratio (Y/B) can be changed with the doped concentration of Dy{sup 3+} ions. All chromaticity coordinates of the obtained NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} phosphors are located in the white-light region. The results indicate that this kind of phosphor may has potential applications in the fields of near UV-excited and blue-excited white LEDs. - Graphical abstract: It can be seen from the SEM images that a pompon-like shape was obtained with an average diameter of about 1 {mu}m, and it is composed of many nanoflakes. Highlights: Black-Right-Pointing-Pointer Pompon-like NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} phosphors have been successfully prepared via a hydrothermal method. Black-Right-Pointing-Pointer Blue emission at 486 nm and yellow emission at 574 nm were obtained from the samples. Black-Right-Pointing-Pointer The yellow-to-blue emission intensity ratio (Y/B) can be changed with the doped concentration of Dy{sup 3+} ions. Black-Right-Pointing-Pointer NaLa(MoO{sub 4}){sub 2}:Dy{sup 3+} can be efficiently excited by the blue light and the near ultraviolet light.

36 MATERIALS SCIENCE↗

Zn-Al layered double hydroxide prepared at different molar ratios: Preparation, characterization, optical and dielectric properties

The co-precipitation method was used to prepare Zn-Al-NO{sub 3}-LDH at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6) and pH value of 7.5. The structure, textural, composition and morphological properties were investigated using powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and scanning electron microscope (SEM), respectively. The crystallinity of LDH samples were found to improve as molar ratio decreased which is attributed to the distortion of the hydroxide layers networks of the LDH crystal by the larger difference in ionic radii of Zn{sup 2+} and Al{sup 3+}. The optical band gap energy of LDH samples were evaluated using absorbance data from UV-Vis-NIR Diffuse reflectance spectroscopy. Band gaps were affected by the variation of the Zn{sup 2+}/Al{sup 3+} molar ratio is due to the formation of the low crystalline phases (ZnO and ZnAl{sub 2}O{sub 4}). The water molecules and anionic NO{sub 3}{sup -} in the LDH interlayer were responsible for the generation of the dielectric response. This response can be described by an anomalous low frequency dispersion using the second type of Universal Power Law. The dominance of ZnO dipoles and charge carriers (NO{sub 3}{sup -} ions) in the dielectric relaxation increases with the increasing molar ratio. - Graphical abstract: (a) Schematic diagram of Zn-Al- NO{sub 3}-LDH shows the LDH structure, (b) Kubelka-Munk transformed reflectance spectra and c. The dielectric constant versus frequency of Zn-Al- NO{sub 3}-LDH samples. Highlights: Black-Right-Pointing-Pointer Zn-Al-NO{sub 3}-LDH was prepared at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6). Black-Right-Pointing-Pointer The crystallinity of LDH phase decreased with increase of Zn{sup 2+}/Al{sup 3+} molar ratio. Black-Right-Pointing-Pointer The optical band gaps of LDH samples have been measured. Black-Right-Pointing-Pointer Dielectric response of LDH can be described by anomalous low frequency dispersion.

36 MATERIALS SCIENCE↗

Soft chemistry synthesis of high-crystalline orthogermanate CeGeO{sub 4}: A new photocatalyst

A new orthogermanate phase of CeGeO{sub 4} was studied and the corresponding nanocrystals have been successfully synthesized via a facile hydrothermal method without adding any capping agent. The pH value of the solution and the reaction time were also further investigated, respectively. The as-prepared CeGeO{sub 4} nanocrystals with a uniform size of 15 nm have been characterized by using XRD/TEM/TGA/UV-vis techniques, and their electronic structures and band gap were calculated based on a plane wave density function theory (DFT). The promising photocatalytic properties of CeGeO{sub 4} have been confirmed through monitoring reactive oxidative species generated in photocatalytic reactions of terephthalic acid as a fluorescence probe. - Graphical Abstract: A novel photocatalyst CeGeO{sub 4} was prepared. Highlights: Black-Right-Pointing-Pointer CeGeO{sub 4} as a novel photocatalyst was successfully synthesized by a hydrothermal method. Black-Right-Pointing-Pointer Electronic structure and band gap were calculated based on DFT. Black-Right-Pointing-Pointer CeGeO{sub 4} exhibited a promising photocatalytic performance.

36 MATERIALS SCIENCE↗

Preparation and visible-light photocatalytic properties of BiNbO₄ and BiTaO₄ by a citrate method

Visible-light photcatalysts of BiNbO₄ and BiTaO₄ powders have been successfully synthesized by a citrate method. The formation of pure triclinic phase of BiNbO₄ and BiTaO₄ at low temperature of 700 °C can be attributed to the advantage of the citrate method. The photocatalytic activity and possible mechanism were investigated deeply. For BiNbO₄ particles, the mechanism of methyl violet (MV) degradation under visible light irradiation involves photocatalytic and photosensitization pathways and the catalyst specific surface area has dominant influence. While for BiTaO₄ particles, the dominant mechanism arises from photosensitization pathways and a trade off between high specific surface area and good crystallinity is achieved. BiNbO₄ powder calcined at 700 °C shows the best photocatalytic efficiency among these catalysts, which is ascribed to its large surface area and more positive conduction band level. The optimal catalyst loading, additive H₂O₂ concentration and pH value is around 1 g/L, 2 mmol/L and 8 mmol/L, respectively. - Graphical abstract: Photodegradation performance and adsorption ability of BiNbO₄ and BiTaO₄ powders, respectively. BNO700 with the best photocatalytic efficiency is ascribed to its large surface area and more positive conduction band level. Highlights: • Pure BiNbO₄ and BiTaO₄ powders were prepared by a citrate method. • Excellent performance of visible-light degradation of MV was observed. • Different MV degradation mechanism for BiNbO₄ and BiTaO₄ powders was proposed. • BNO700 has large surface area and more positive conduction band level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functionalized mesoporous silica materials for molsidomine adsorption: Thermodynamic study

A series of unmodified and organically modified mesoporous silica materials was prepared. The unmodified mesoporous silica was synthesized via sol–gel synthesis in the presence of D-glucose as pore-forming agent. The functionalized by phenyl, aminopropyl and mercaptopropyl groups silica materials were prepared via grafting. The fabricated adsorbent materials were characterized by Fourier transform infrared spectroscopy (FTIR) analysis, N{sub 2} adsorption/desorption and elemental analysis methods. Then their adsorption properties for mesoionic dug molsidomine were investigated at 290–313 K and physiological pH value. Thermodynamic parameters of molsidomine adsorption on the synthesized materials have been calculated. The obtained results showed that the adsorption process of molsidomine on the phenyl modified silica is the most quantitatively and energetically favorable. The unmodified and mercaptopropyl modified silica materials exhibit significantly higher adsorption capacities and energies for molsidomine than the aminopropyl modified sample. The effects are discussed from the viewpoint of nature of specific interactions responsible for the adsorption. - Graphical abstract: Comparative analysis of the thermodynamic characteristics of molsidomine adsorption showed that the adsorption process on mesoporous silica materials is controlled by chemical nature of surface functional groups. Molsidomine adsorption on the phenyl modified silica is the most quantitatively and energetically favorable. Taking into account ambiguous nature of mesoionic compounds, it was found that molsidomine is rather aromatic than dipolar. Display Omitted - Highlights: • Unmodified and organically modified mesoporous silica materials were prepared. • Molsidomine adsorption on the silica materials was studied. • Phenyl modified silica shows the highest adsorption capacity and favorable energy. • Molsidomine exhibits the lowest affinity to aminopropyl modified silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu{sup II} coordination polymers based on 5-methoxyisophthalate and flexible N-donor ligands: Structures and magnetic properties

Three Cu{sup II} coordination polymers, ([Cu{sub 2}(CH{sub 3}O-ip){sub 2}(bmib)]){sub n} (1), ([Cu{sub 2}(CH{sub 3}O-ip){sub 2}(bmib){sub 2}]){sub n} (2) and ([Cu(CH{sub 3}O-ip)(bbip)]∙2H{sub 2}O){sub n} (3) (CH{sub 3}O-H{sub 2}ip is 5-methoxyisophthalic acid, bmib is 1,4-bis(2-methylimidazol-1-yl)butane and bbip is 1,3-bis(1H-benzimidazolyl)propane), have been synthesized by hydrothermal methods. Complexes 1–3 were structurally characterized by elemental analysis, infrared (IR) spectra and X-ray single-crystal diffraction. Complex 1 shows a 3D six-connected self-penetrating network based on paddlewheel secondary building units. Complex 2 has a 3-fold interpenetrating 3D diamond framework. Complex 3 possesses a 1D tube-like chain. Thermo-gravimetric and magnetic properties of 1–3 were also investigated. - Graphical abstract: Structures and magnetic properties of copper(II) coordination polymers constructed from 5-methoxyisophthalate linker and two flexible N-donor ancillary ligands. Three copper(II) coordination polymers with 5-methoxyisophthalate and two related flexible N-donor ancillary ligands have been synthesized and structurally characterized. Moreover, thermal behaviors and magnetic properties of these complexes have also been investigated. - Highlights: • Three Cu(II) coordination polymers were synthesized. • The conformations of N-donor ligands and pH value have an effect on the final structures. • The magnetic properties of 1–3 have been investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuO nanostructures on copper foil by a simple wet chemical route at room temperature

Uniform CuO nanostructures have been synthesized on copper foil substrates by oxidation of Cu in alkaline condition by a simple wet chemical route at room temperature. By controlling the alkaline condition (pH value) different CuO nanostructures like nanoneedles, self-assembled nanoflowers and staking of flake-like structures were achieved. The phase formation and the composition of the films were characterized by X-ray diffraction and energy dispersive analysis of X-ray studies. X-ray photoelectron spectroscopic studies indicated that the samples were composed of CuO. The morphologies of the films were investigated by scanning electron microscopy. A possible growth mechanism is also proposed here. Band gap energies of the nanostructures were determined from the optical reflectance spectra. The different CuO nanostructures showed good electron field emission properties with turn-on fields in the range 6-11.3 V {mu}m{sup -1}. The field emission current was significantly affected by the morphologies of the CuO films.

36 MATERIALS SCIENCE↗

Surfactant-free synthesis and electrochemical properties of chrysanthemum-like InVO{sub 4} hierarchical microstructures

Novel chrysanthemum-like hierarchical microstructures of orthorhombic InVO{sub 4} were synthesized via a hydrothermal route without assistance of any template or organic additive. The chrysanthemum-like InVO{sub 4} microstructures are built up of numerous nanobelts radially aligned around the spherical surface. Based on the structural feature of orthorhombic InVO{sub 4} and the key role of the pH value, a probable mechanism of the etching-splitting growth process induced by H{sup +} ions was proposed to explain the formation of InVO{sub 4} microstructures. Furthermore, the chrysanthemum-like InVO{sub 4} sample shows a high discharge capacity of 608.6 mAh g{sup -1} and acceptable capacity retention when used as an electrode material in lithium ion batteries. The pure orthorhombic phase and unique porous morphology play basic roles in the structural requirement to serve as transport paths for lithium ion.

36 MATERIALS SCIENCE↗

Microwave-heating synthesis and sensing applications of bright gold nanoclusters

Highlights: Black-Right-Pointing-Pointer We establish a microwave-heating method to synthesize protein-stabilized Au nanoclusters. Black-Right-Pointing-Pointer The obtained Au nanoclusters show bright red fluorescence. Black-Right-Pointing-Pointer The Au nanoclusters can be used as efficient fluorescence probe for Cu{sup 2+} ion sensing. -- Abstract: A rapid microwave-heating method has been developed for the synthesis of bright Au nanoclusters by using bull serum albumin as the template in an aqueous environment. The reaction time needed is only 7.0 min, and the weight of the products at one batch can reach 15 g. The Au nanoclusters exhibit bright fluorescence at {approx}613 nm with quantum yield of {approx}6.0%. By adjusting the pH value, the products can be controlled to precipitate or re-disperse in aqueous solution. Furthermore, the Au nanoclusters have exhibited high sensitivity and selectivity in the determination of Cu{sup 2+} ions in water. These results suggest an efficient method for obtaining metal nanoclusters for the detection and sensing applications.

36 MATERIALS SCIENCE↗

Large-scale and shape-controlled synthesis and characterization of nanorod-like nickel powders under microwave radiation

Graphical abstract: The nanorod-like pure nickel were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The materials were characterized by XRD, SEM, EDS, HRTEM, and selected-area electron diffraction, etc. The lattice expansion for Ni powders was explained in detail. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of Ni nanorod-like (fcc) were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Highlights: Black-Right-Pointing-Pointer The synthesis of nanorod-like nickel under microwave irradiation. Black-Right-Pointing-Pointer Nitrogen generated in reaction as a shielding gas. Black-Right-Pointing-Pointer The lattice expansion for Ni powders was explained in detail. Black-Right-Pointing-Pointer Magnetic properties of Ni were quite different from those of Ni nanoparticles. -- Abstract: The nanorod-like nickel powders were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The morphology and structure of as-prepared products could be easily tuned by adjusting process parameters such as pH value and microwave irradiation time. The resulting materials were characterized by X-ray diffraction (XRD), scanning electron microscope, transmission electron microscopy and selected-area electron diffraction (SAED). The results demonstrated that pure nickel powders with face-centered cubic (fcc) structure were prepared at relatively mild condition and no characteristic peaks of nickel oxide in the XRD pattern were found. The phenomenon of lattice expansion for Ni powders was explained in details according to the XRD theory. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of nanorod-like (fcc) Ni powders were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Furthermore, it had more strong ferromagnetic properties than that of Ni powders both bulk and nanoparticles.

36 MATERIALS SCIENCE↗

Electrical property and characterization of nano-SnO{sub 2}/wollastonite composite materials

Graphical abstract: Resistivity as a function of different factors: hydrolysis temperature and time. Highlights: ► We have synthesized nano-tin oxide deposited on the surface of wollastonite. ► The antistatic properties were measured by rubber sheeter and four-point probe (FPP) sheet resistance measurement. ► The results showed that the nano-SnO{sub 2}/wollastonite composite materials showed better antistatic properties. ► The surface of wollastonite fiber was coated with a layer of 10–15 nm thickness of tin oxide grains. - Abstract: Nano-tin oxide was deposited on the surface of wollastonite using the mixed solution including stannic chloride pentahydrate precursor and wollastonite by a hydrolysis precipitation process. The antistatic properties of the wollastonite materials under different calcined conditions and composite materials (nano-SnO{sub 2}/wollastonite, SW) were measured by rubber sheeter and four-point probe (FPP) sheet resistance measurement. Effects of hydrolysis temperature and time, calcination temperature and time, pH value and nano-SnO{sub 2} coating amount on the resistivity of SW powders were studied, and the optimum experimental conditions were obtained. The microstructure and surface properties of wollastonite, precipitate and SW were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), specific surface area analyzer (BET), thermogravimetry (TG), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier translation infrared spectroscopy (FTIR) respectively. The results showed that the nano-SnO{sub 2}/wollastonite composite materials under optimum preparation conditions showed better antistatic properties, the resistivity of which was reduced from 1.068 × 10{sup 4} Ω cm to 2.533 × 10{sup 3} Ω cm. From TG and XRD analysis, the possible mechanism for coating of SnO{sub 2} nanoparticles on the surface of wollastonite was proposed. The infrared spectrum indicated that there were a large number of the hydroxyl groups on the surface of wollastonite. This is beneficial to the heterogeneous nucleation reaction. Through morphology, EDS and XPS analysis, the surface of wollastonite fiber was coated with a layer of 10–15 nm thickness of tin oxide grains the distribution of which was uniform.

36 MATERIALS SCIENCE↗