Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Targeted inhibition of MASTL kinase activity induces apoptosis in breast cancer

Microtubule-associated serine/threonine kinase-like (MASTL) (or Greatwall kinase (GWL)) is an important cell cycle regulating kinase that regulates the G2-M transition. Uncontrolled MASTL activity is implicated in breast cancer progression. To date, very few inhibitors have been reported against this protein. Here, structure-based computational modeling indicates that the natural product flavopiridol (FLV) binds strongly to MASTL and these results are validated using molecular dynamics simulation studies. Further, an in vitro kinase assay reveals an EC 50 (effective concentration) value of FLV to be 82.1 nM and a better IC 50 compared to the positive reference compound, staurosporine. FLV is found to inhibit MASTL kinase activity, arresting the cell growth in the G1 phase and inducing apoptosis in breast cancer cells. Consistent with these results differential gene expression obtained using RNA sequencing studies, and validated by RT PCR and immunoblot analysis, indicate that MASTL inhibition induces cell cycle arrest and apoptotic-related genes. Furthermore, metastasis- and inflammation- related genes are downregulated. Thus, the deregulation of MASTL signaling pathways on targeted inhibition of its kinase activity is revealed. This study lays a strong foundation for investigating FLV as a lead compound in breast cancer therapeutics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2012

Effect of neodymium doping on structure, electrical and optical properties of nanocrystalline ZnO

In this paper, we report effect of Nd doping on structure, electrical and optical properties of nanocrystalline ZnO prepared through a modified ceramic route. The X-ray diffraction and transmission electron microscopy studies reveal that annealed samples are single phase, pure nanocrystalline ZnO. The optical band gap for different compositions, estimated from ultraviolet-visible spectroscopy study, shows a little increasing tendency while doped with Nd for the samples annealed at lower temperature. The dc electrical conductivity of the samples decreases with the increase in Nd concentration. The ac electrical measurements prove the hopping conduction as the dominant mechanism. The results are being explained on the basis of band structural change due to Nd doping in the host lattice and by Correlated Barrier Hopping model. - Highlights: Black-Right-Pointing-Pointer Particle size increases when it is doped (from XRD). Black-Right-Pointing-Pointer XRD peak shifted to lower angle when doped. Black-Right-Pointing-Pointer The dc conductivity decreases with the increase of Nd dopant concentrations. Black-Right-Pointing-Pointer The temperature dependent ac conductivity follows the universal power law.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl{sub 2}O{sub 4}-SiC core-shell microcomposites

Interface between ceramic particulate and matrix is known to control the response of the materials and functionality of the composite. Among numerous physical properties, grain structure of the materials has also played a significant role in defining the behaviour of metal matrix composites. Usually, silicon carbide (SiC) particles show poor interfacial wettability in aluminium melt. Herein, we were successfully synthesized magnesium oxide (MgO) and nanocrystalline magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel coated silicon carbide (SiC) core-shell micro-composites through sol-gel technique to improve the wettability of dispersoids. Core-shell structures of submicron size were thoroughly investigated by various characterization techniques. Further, aluminium matrix composites incorporated with pristine SiC, MgO grafted SiC and MgAl{sub 2}O{sub 4} grafted SiC particles were fabricated by stir casting technique, respectively. Additionally, as-cast composites were processed via friction stir processing (FSP) technique to observe the influence of grain refinement on mechanical and damping properties. Electron back scattered diffraction (EBSD), Field emission scanning electron microscopy (FE-SEM) and X-ray energy dispersion spectroscopy (EDX) analysis were conducted for investigating grain size refinement, adequate dispersion, stability and de-agglomeration of encapsulated SiC particles in aluminium matrix. The mechanical as well as thermal cyclic (from − 100 to 400 °C) damping performance of the as-cast and friction stir processed composites were studied, respectively. Finally, the enhanced properties were attributable to reduced agglomeration, stabilization and proper dispersion of the tailored SiC particles Al matrix. - Highlights: •Synthesizing a novel coating layer of MgO and MgAl{sub 2}O{sub 4} spinel onto SiC particles •Significant improvement in UTS and hardness by reinforcing tailored SiC in Al •Significant grain refinements were obtained through FSP •SiC/MgAl{sub 2}O{sub 4}/Al exhibits ~ 61% higher storage modulus as compare to pure Al after FSP.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Structure, magnetic and cytotoxic behaviour of solvothermally grown Fe3O4@Au core-shell nanoparticles

Highlights: • Synthesis of Fe{sub 3}O{sub 4}@Au nanoparticles was made by solvothermal method. • The magnetic nanoparticles was analyzed by XRD, FT-IR, magnetization curves and aberration corrected (Cs) STEM techniques. • Core-shell Fe{sub 3}O{sub 4}@Au nanoparticles showed low apoptotic response and therefore lower toxicity. • Fe{sub 3}O{sub 4}@Au nanoparticles with high saturation magnetization showed good biocompatibility. - Abstract: Magnetic nanoparticles (MNPs) have demonstrated their potential in a wide variety of biomedical applications including in tumour hyperthermia. However, highly reactive nature and aggregation affinity of these nanostructures are the principal limitations for such applications. To overcome these limitations, those MNPs should be covered with an inert shell in order to protect the magnetic core against chemical alterations. Considering the noble, chemically inert nature of gold, which also has good biocompatibility, we fabricated chemically stable gold-coated Fe{sub 3}O{sub 4} (Fe{sub 3}O{sub 4}@Au) nanoparticles of 20–50 nm size range with considerable saturation magnetization, though a simple one-pot solvothermal method. The morphology, elemental distribution and the structure of the core-shell nanoparticles were characterized using aberration-corrected (Cs) Scanning transmission electron microscopy (STEM), and compared with their simulated images. Cytotoxicity assay in MDCK cell line was performed to evaluate the biocompatibility of the nanoparticles. The results showed higher cell viability for the Fe{sub 3}O{sub 4}@Au nanoparticles, suggesting their good biocompatibility and potentials for biomedical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy

Highlights: • For in-process cryocooling (IPC) during FSP, an efficient cooling fixture was designed & fabricated. • FSP of Al7075 alloy with IPC setup suppressed precipitate coarsening as well as grain growth. • Nanosize η′ precipitates (20–30 nm) in IPC condition increased work hardening capacity & strength. • Simultaneous improvement in ductility & strength occurred for sample FSPed with IPC. - Abstract: Friction stir processing (FSP) of heat treatable aluminum alloys is reported to deteriorate strength and hardness properties in spite of huge grain size refinement. The improvement in strength due to the grain size refinement after FSP could not be able to offset the reduction in strength due to coarsening or dissolution of the strengthening precipitate(s). To overcome this, the present work investigates an effective way of heat rejection from the FSP zone to control the precipitate evolution besides the grain size refinement during FSP of Al7075 alloy. The FSP was carried out with standardized process parameters (i.e. 720 rpm, 65 mm/min traverse speed) under two different cooling environments: (i) at normal air cooling and (ii) by rushing a chilled mixture (−30 °C) of liquid nitrogen and methanol through the bottom of the backing plate. Microstructural evolution was examined through optical, scanning and transmission electron microscopy and electron backscatter diffraction to confirm the grain size and morphology of precipitate(s) formed. The in-process cryocooling during the FSP led to 65 and 72% improvement in the Vickers hardness and tensile strength, respectively, in comparison to the solutionized base metal. The results have been analyzed in terms of precipitate interface characteristics and its strengthening effect, Hall–Petch strengthening due to grain size reduction and tradeoff between them.

36 MATERIALS SCIENCE↗
DOE OSTI2010

Sensing behaviour of nanosized zinc-tin composite oxide towards liquefied petroleum gas and ethanol

A chemical route has been used to synthesize composite oxides of zinc and tin. An ammonia solution was added to equal amounts of zinc and tin chloride solutions of same molarities to obtain precipitates. Three portions of these precipitates were annealed at 400, 600 and 800 {sup o}C, respectively. Results of X-ray diffraction and transmission electron microscopy clearly depicted coexistence of phases of nano-sized SnO{sub 2}, ZnO, Zn{sub 2}SnO{sub 4} and ZnSnO{sub 3}. The effect of annealing on structure, morphology and sensing has been observed as well. It has been observed that annealing promoted growth of Zn{sub 2}SnO{sub 4} and ZnSnO{sub 3} at the expense of zinc. The sensing response of fabricated sensors from these materials to 250 ppm LPG and ethanol has been investigated. The sensor fabricated from powder annealed at 400 {sup o}C responded better to LPG than ethanol.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Synthesis and anti-bacterial activity of Cu, Ag and Cu-Ag alloy nanoparticles: A green approach

Research highlights: {yields} Synthesis of novel nanosized copper-silver alloys of different compositions. {yields} Completely green approach for synthesis of water soluble bimetallic nanoparticle. {yields} Interesting anti-bacterial activity of as synthesized metal and alloy nanoparticle. -- Abstract: Metallic and bimetallic nanoparticles of copper and silver in various proportions were prepared by microwave assisted chemical reduction in aqueous medium using the biopolymer, starch as a stabilizing agent. Ascorbic acid was used as the reducing agent. The silver and copper nanoparticles exhibited surface plasmon absorption resonance maxima (SPR) at 416 and 584 nm, respectively; while SPR for the Cu-Ag alloys appeared in between depending on the alloy composition. The SPR maxima for bimetallic nanoparticles changes linearly with increasing copper content in the alloy. Transmission electron micrograph (TEM) showed monodispersed particles in the range of 20 {+-} 5 nm size. Both silver and copper nanoparticles exhibited emission band at 485 and 645 nm, respectively. The starch-stabilized nanoparticles exhibited interesting antibacterial activity with both gram positive and gram negative bacteria at micromolar concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Highly porous ZnS microspheres for superior photoactivity after Au and Pt deposition and thermal treatment

Graphical abstract: Highly porous ZnS microsphere of size 2–5 μm having large surface area ca. 173.14 m{sup 2} g{sup −1} exhibits superior photocatalytic activity for the oxidation of 4-nitrophenol under UV light irradiation. The rate of photooxidation has been significantly improved by Au and Pt deposition and after sintering, respectively, due to rapid electron acceptance by metal from photoexcited ZnS and growth of crystalline ZnS phase. - Highlights: • Photoactive ZnS microsphere of size 2–5 μm was prepared by hydrothermal route. • Highly porous cubic spherical ZnS crystals possess a large surface area, 173 m{sup 2} g{sup −1}. • 1 wt% Au and Pt photodeposition highly quenched the photoluminescence at 437 nm. • Sintering and metal loading notably improve the photooxidation rate of 4-nitrophenol. • Pt co-catalyst always exhibits superior photoactivity of ZnS microsphere than Au. - Abstract: This work highlights the enhanced photocatalytic activity of porous ZnS microspheres after Au and Pt deposition and heat treatment at 500 °C for 2 h. Microporous ZnS particles of size 2–5 μm with large surface area 173.14 m{sup 2} g{sup −1} and pore volume 0.0212 cm{sup 3} g{sup −1} were prepared by refluxing under an alkaline medium. Photoluminescence of ZnS at 437 nm attributed to sulfur or zinc vacancies were quenched to 30% and 49%, respectively, after 1 wt% Au and Pt loading. SEM images revealed that each ZnS microparticle consist of several smaller ZnS spheres of size 2.13 nm as calculated by Scherrer's equation. The rate of photooxidation of 4-nitrophenol (10 μM) under UV (125 W Hg arc–10.4 mW/cm{sup 2}) irradiation has been significantly improved by Au and Pt deposition followed by sintering due to better electron capturing capacity of deposited metals and growth of crystalline ZnS phase with less surface defects.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Effect of neodymium substitution on structural and ferroelectric properties of BNT ceramics

Graphical abstract: - Highlights: • First time, we synthesized (Bi{sub 1−x}Nd{sub x}){sub 0.5}Na{sub 0.5}TiO{sub 3} system by semi wet technique. • Grain size reduced with doping and Nd acts as an inhibitor in the grain growth. • Specimen with x = 0.02 exhibits excellent ferroelectric properties at RT. • P–E loops show the co-existence of polar and non polar regions around ‘T{sub d}’. - Abstract: Polycrystalline specimens of (Bi{sub 1−x}Nd{sub x}){sub 0.5}Na{sub 0.5}TiO{sub 3} (BNNT) ceramic system with compositions x ≤ 0.04 were synthesized by semi-wet technique using ethylene glycol precursor. Structural and electrical properties were investigated in detail to observe the effect of neodymium (Nd) substitution in BNT system. XRD patterns for all the specimens showed single phase formation with rhombohedral structure. Field emission scanning electron micrographs (FE-SEM) revealed that the grain growth was inhibited significantly with Nd content. The temperature dependence behaviour of dielectric constant revealed that the depolarisation temperature ‘T{sub d}’ decreases whereas temperature of maximum dielectric constant ‘T{sub m}’ increases with Nd concentration. The piezoelectric charge coefficient (d{sub 33}) showed maxima at x = 0.02 and well defined ferroelectric behaviour was observed for all the samples.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Physicochemical and catalytic properties of Au nanorods micro-assembled in solvents of varying dipole moment and refractive index

Highlights: • Physicochemical activities of Au nanorods in water largely differ from organic solvents. • Au nanorods agglomeration increased with dipole moments of different polar solvents. • Refractive indexes of Au nanorods dispersion in various polar solvents are enhanced. • Electrokinetics significantly altered depending on agglomerated size of Au nanorods. • Catalysis or co-catalysis activity is varied as per the extent of Au nanorods coagulation. - Abstract: This paper deals with the impact of dipole moment (1.66–3.96 D) and refractive index (1.333–1.422) of the dispersion solvent on the plasmon absorption, surface charge, zeta potential, and adsorption properties of Au nanorods (AuNRs). AuNRs (length ≈ 53 nm and width ≈ 20 nm) undergo agglomeration (size 50–180 nm) with increase in the dipole moment of solvent (iPrOH < MeOH < DMF < DMSO). Whereas, no such coagulation occurs in H{sub 2}O and CCl{sub 4} suspension as confirmed by DLS and TEM size distribution. The electrostatic interaction of AuNRs with its surface adsorbed solvent dipoles leads to alteration of the their ionic state, absolute electronic charge and zeta potential (+49.79 mV in H{sub 2}O, +8.99 mV in DMF and −4.65 mV in MeOH dispersion) to a greater extent. This interaction distinctly modifies the adsorption behavior of polar molecules like p-nitrophenol and salicylic acid on AuNRs surface, as evidenced by the measured changes in their electro-kinetic parameters. As a result, we observe a substantial difference in catalytic and co-catalytic activities of AuNRs dispersed in various solvents as mentioned above because the catalytic properties of AuNRs are strongly dependent on the type of solvent in which they are dispersed.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Electrical characterization of grain boundaries of CZTS thin films using conductive atomic force microscopy techniques

Graphical abstract: Experimental setup for conducting AFM (C-AFM). - Highlights: • Cu{sub 2}ZnSnS{sub 4} (CZTS) thin film was grown by reactive co-sputtering. • The electronic properties were probed using conducting atomic force microscope, scanning Kelvin probe microscopy and scanning capacitance microscopy. • C-AFM current flow mainly through grain boundaries rather than grain interiors. • SKPM indicated higher potential along the GBs compared to grain interiors. • The SCM explains that charge separation takes place at the interface of grain and grain boundary. - Abstract: Electrical characterization of grain boundaries (GB) of Cu-deficient CZTS (Copper Zinc Tin Sulfide) thin films was done using atomic force microscopic (AFM) techniques like Conductive atomic force microscopy (CAFM), Kelvin probe force microscopy (KPFM) and scanning capacitance microscopy (SCM). Absorbance spectroscopy was done for optical band gap calculations and Raman, XRD and EDS for structural and compositional characterization. Hall measurements were done for estimation of carrier mobility. CAFM and KPFM measurements showed that the currents flow mainly through grain boundaries (GB) rather than grain interiors. SCM results showed that charge separation mainly occurs at the interface of grain and grain boundaries and not all along the grain boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Silica supported TiO{sub 2} nanostructures for highly efficient photocatalytic application under visible light irradiation

Highlights: • Synthesis of silica–titania nanocomposite by simple and facile chemical route and characterization of the materials. • Excellent catalytic activity on organic pollutant methylene blue under the visible light irradiation. • Photocatalytic rate is much higher than commercial P25 TiO{sub 2} catalyst powder. • The higher activity is attributed to the special structure and synergistic effect of the materials which has immense application potential. - Abstract: Titanium dioxide decorated silica nanospheres have been synthesized by a simple wet chemical approach. X-ray diffraction, electron microscopy and energy dispersive X-ray analysis revealed that anatase phase of TiO{sub 2} nanostructures, with exposed {0 0 1} and {1 0 1} facets, are anchored onto the amorphous silica spheres of ∼60 nm diameter. The photocatalytic activity of the sample under visible light irradiation was examined. It is found that photocatalytic efficiency of the material is better than commercial P25 TiO{sub 2} photocatalyst and the result is attributed to the unique synergistic effect of SiO{sub 2}–TiO{sub 2} nanocomposite structure resulting enhanced charge separation and charge transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Study of the structural and magnetic phase-transitions and multiferroic properties in BiFeO3-Ba0.95Ca0.05TiO3 solid solutions

Highlights: • The detailed structural analysis has been done for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The detailed magnetic behavior has been studied for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The dielectric constant (ε') and the dielectric loss (ε'') versus frequency curves have been fitted by using Cole-Cole dispersion formula and non-Debye relaxation behavior has been found. • The weak magnetodielectric response (MD) has been found. • The non saturating P-E loops have been found for 0.7 ≤ x ≤ 0.9 samples. - Abstract: We synthesized (1-x) BiFeO{sub 3}-x Ba{sub 0.95}Ca{sub 0.05}TiO{sub 3} solid solutions for 0.1 ≤ x ≤ 0.9, using a solid-state-reaction. The XRD analysis reveals that a composition-driven rhombohedral-to-cubic and a cubic-to-tetragonal phase-transition occur at x ≈ 0.4 and x ≈ 0.7, respectively. The experiments show that BaCaTiO{sub 3}-substitution suppresses the spiral spin-structure, which leads to net magnetization. The samples have been found to exhibit magnetic order for 0.1 ≤ x ≤ 0.7 and paramagnetic behavior for x ≥ 0.8. The electrical conductivity increases with increasing frequency of the applied electric field. The dielectric measurements suggest a non-Debye type relaxation. The samples show magneto-dielectric response (MD) upto x = 0.5, with the highest MD of 11.61% at 10 kHz for x = 0.3. The maximum attainable remanent polarization (P{sub r}) ∼ 5.24 μC/cm{sup 2} was observed for x = 0.7.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A critical review of existing and emerging technologies and systems to optimize solid waste management for feedstocks and energy conversion

Solid waste generation and its accumulation is increasing at an alarming pace due to population growth and urbanization posing severe risks to health, safety, and natural ecosystems. Herein this review strategically addresses the challenges and solutions to increasing the sustainability footprint of solid waste management (SWM) systems by revealing multipronged approaches that reduce solid waste and handling costs while generating revenue and reducing greenhouse gas and related emissions. For example, the United States sends ~150 million tons of waste to landfills, which is composed of over 75% organic and recyclable materials having a potential to be diverted to alternative scenarios. The emergence of an automated upstream and downstream sorting process for solid waste to increase material diversion from landfills is a promising approach for creating sustainable SWM. The utilization of artificial-intelligence-enabled smart and automated systems at the home and industrial scales, comprehensive public re-education including awareness of the adverse effects of landfilled waste on the ecosystem, and more eco-friendly product development are required to significantly reduce landfills and their negative footprint.

09 BIOMASS FUELS↗
DOE OSTI2025

Hyperspectral imaging for real-time waste materials characterization and recovery using endmember extraction and abundance detection

Hyperspectral imaging, combined with advanced spectral unmixing techniques and artificial intelligence, offers a powerful solution for improving material identification and classification. Here, this study evaluates the effectiveness of the pixel purity index and the sequential maximum angle convex cone algorithms in extracting and validating spectral signatures from pure samples of paper components (cellulose and lignin) and plastic (polypropylene). Principal-component analysis showed that both algorithms captured nearly all relevant variance for the tested materials. Spectral signatures were compared using the spectral angle mapper, revealing high similarity in the short-wave infrared region and greater variability in the visible near-infrared range. The methodology was then applied to a disposable coffee cup to detect and quantify mixed materials, accurately estimating material abundance and object area with less than 1% error. This approach enhances material classification, supporting product verification, quality control, and automated sorting for sustainable waste management and resource recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of non-solvent chemistry on polybenzimidazole hollow fiber membrane preparation

Polybenzimidazole membrane materials have attractive H 2 /CO 2 separation characteristics and high thermo-chemical stability for elevated temperature synthesis (syn) gas separations. The development of PBI membranes with a thin defect-free selective layer and porous support morphology is vital to achieving industrially attractive separation performance. This work is focused on developing a fundamental understanding of the liquid-liquid demixing-based phase inversion process for asymmetric PBI hollow fiber membrane (HFM) formation. The development of industrially attractive HFMs is a challenging process due to the complex interplay between phase equilibria, phase inversion kinetics, and interfacial mass transfer that exist during the liquid-liquid demixing process. Numerous parameters including the dope, bore, and outer coagulant chemistries and compositions significantly influence the HFM morphologies produced. Here, a systematic study is conducted to investigate the phase inversion process parameters including the roles of the non-solvent solubility and diffusivity parameters with respect to the solvent and PBI on the phase inversion process. Furthermore, the influence of dope, bore and coagulant chemistries and compositions on PBI HFM morphology are investigated. As a result, the fabricated PBI HFMs are evaluated for their ideal H 2 and CO 2 permeance and H 2 /CO 2 selectivity at 250 °C to benchmark their separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗