Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical waveguides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Efficient and compact thermo-optic phase shifter in silicon-rich silicon nitride

The design, fabrication, and characterization of low-loss ultra-compact bends in high-index (${n} = {3.1}$ at $\lambda = {1550}\;{\rm nm}$) plasma-enhanced chemical vapor deposition silicon-rich silicon nitride (SRN) were demonstrated and utilized to realize efficient, small footprint thermo-optic phase shifter. Compact bends were structured into a folded waveguide geometry to form a rectangular spiral within an area of ${65} \times {65}\;\unicode{x00B5}{{\rm m}^2}$, having a total active waveguide length of 1.2 mm. The device featured a phase-shifting efficiency of $8\;{\rm mW}/\pi$ and a 3 dB switching bandwidth of 15 KHz. Here, we propose SRN as a promising thermo-optic platform that combines the properties of silicon and stoichiometric silicon nitride.

Nejadriahi, Hani↗

Formation of integrated optics components by multiphoton photorefractive processes

Phase holograms have been formed in pure outdiffused LiNbO3 waveguides using the photorefractive effect initiated by two-photon absorption. Efficient holograms were recorded with two guided waves, of less than 100 W peak power, and less than 10 microJ optical energy. This technique automatically compensates for wave front perturbations in the guide and allows the formation of various integrated components such as wavelength multiplexers and optical switches.

Verber, C. M.↗

Coupling Single-Mode Fiber to Uniform and Symmetrically Tapered Thin-Film Waveguide Structures Using Gadolinium Gallium Garnet

The need for high efficiency components has grown significantly due to the expanding role of fiber optic communications for various applications. Integrated optics is in a state of metamorphosis and there are many problems awaiting solutions. One of the main problems being the lack of a simple and efficient method of coupling single-mode fibers to thin-film devices for integrated optics. In this paper, optical coupling between a single-mode fiber and a uniform and tapered thin-film waveguide is theoretically modeled and analyzed. A novel tapered structure presented in this paper is shown to produce perfect match for power transfer.

Gadi, Jagannath↗

Design Techniques for Beam Waveguide Systems

Various design techniques used for beam waveguide (BWG) feed systems are characterized. These include the use of gaussian beam, geometrical optics, and physical optics systems. Also introduced is a new technique based upon a conjugate phase matching focal plane technique. Advantages, disadvantages, and range of applicability of each technique is given, In addition, comparisons of computed and measured results from each type of design are presented.

beam↗

Low-Loss Waveguides for Terahertz Frequencies

Hollow-core, periodic bandgap (HCPBG) flexible waveguides have been proposed as a means of low-loss transmission of electromagnetic signals in the frequency range from about 300 GHz to 30 THz. This frequency range has been called the "terahertz gap" because it has been little utilized: Heretofore, there has been no way of low-loss guiding of terahertz beams other than by use of fixed-path optical beam guides with lenses and mirrors or multimode waveguides that cannot maintain mode purity around bends or modest discontinuities.

Siegel, Peter↗

High-frequency asymptotic methods for analyzing the EM scattering by open-ended waveguide cavities

Four high-frequency methods are described for analyzing the electromagnetic (EM) scattering by electrically large open-ended cavities. They are: (1) a hybrid combination of waveguide modal analysis and high-frequency asymptotics, (2) geometrical optics (GO) ray shooting, (3) Gaussian beam (GB) shooting, and (4) the generalized ray expansion (GRE) method. The hybrid modal method gives very accurate results but is limited to cavities which are made up of sections of uniform waveguides for which the modal fields are known. The GO ray shooting method can be applied to much more arbitrary cavity geometries and can handle absorber treated interior walls, but it generally only predicts the major trends of the RCS pattern and not the details. Also, a very large number of rays need to be tracked for each new incidence angle. Like the GO ray shooting method, the GB shooting method can handle more arbitrary cavities, but it is much more efficient and generally more accurate than the GO method because it includes the fields diffracted by the rim at the open end which enter the cavity. However, due to beam divergence effects the GB method is limited to cavities which are not very long compared to their width. The GRE method overcomes the length-to-width limitation of the GB method by replacing the GB's with GO ray tubes which are launched in the same manner as the GB's to include the interior rim diffracted field. This method gives good accuracy and is generally more efficient than the GO method, but a large number of ray tubes needs to be tracked.

Burkholder, R. J.↗

Microgravity Processing and Photonic Applications of Organic and Polymeric Materials

In recent years, a great deal of interest has been directed toward the use of organic materials in the development of high-efficiency optoelectronic and photonic devices. There is a myriad of possibilities among organics which allow flexibility in the design of unique structures with a variety of functional groups. The use of nonlinear optical (NLO) organic materials such as thin-film waveguides allows full exploitation of their desirable qualities by permitting long interaction lengths and large susceptibilities allowing modest power input. There are several methods in use to prepare thin films, such as Langmuir-Blodgett (LB) and self-assembly techniques, vapor deposition, growth from sheared solution or melt, and melt growth between glass plates. Organics have many features that make them desirable for use in optical devices such as high second- and third-order nonlinearities, flexibility of molecular design, and damage resistance to optical radiation. However, their use in devices has been hindered by processing difficulties for crystals and thin films. In this chapter, we discuss photonic and optoelectronic applications of a few organic materials and the potential role of microgravity on processing these materials. It is of interest to note how materials with second- and third-order nonlinear optical behavior may be improved in a diffusion-limited environment and ways in which convection may be detrimental to these materials.

Frazier, Donald O.↗

Quantum cascade laser with monolithically integrated passive waveguide

A photonic integrated circuit device includes a passive waveguide section formed over a substrate, a quantum cascade laser (QCL) gain section formed over the substrate and adjacent to the passive waveguide section, and a taper section disposed between and in contact with each of the passive waveguide section and the QCL gain section. In some embodiments, the passive waveguide section includes a passive waveguide core layer disposed between a first cladding layer and a second cladding layer. In some examples, the QCL gain section includes a QCL active region disposed between a first confinement layer and a second confinement layer, where the QCL active region has a lower index of refraction than each of the first and second confinement layers. In some embodiments, the taper section is configured to optically couple the QCL gain section to the passive waveguide section.

Jung, Seungyong↗

Microgravity Processing and Photonic Applications of Organic and Polymeric Materials

In recent years, a great deal of interest has been directed toward the use of organic materials in the development of high-efficiency optoelectronic and photonic devices. There is a myriad of possibilities among organic which allow flexibility in the design of unique structures with a variety of functional groups. The use of nonlinear optical (NLO) organic materials such as thin-film waveguides allows full exploitation of their desirable qualities by permitting long interaction lengths and large susceptibilities allowing modest power input. There are several methods in use to prepare thin films, such as Langmuir-Blodgett (LB) and self-assembly techniques, vapor deposition, growth from sheared solution or melt, and melt growth between glass plates. Organics have many features that make Abstract: them desirable for use in optical devices such as high second- and third-order nonlinearities, flexibility of molecular design, and damage resistance to optical radiation. However, their use in devices has been hindered by processing difficulties for crystals and thin films. In this chapter, we discuss photonic and optoelectronic applications of a few organic materials and the potential role of microgravity on processing these materials. It is of interest to note how materials with second- and third-order nonlinear optical behavior may be improved in a diffusion-limited environment and ways in which convection may be detrimental to these materials. We focus our discussion on third-order materials for all-optical switching, and second-order materials for all-optical switching, and second-order materials for frequency conversion and electrooptics.

Frazier, Donald 0↗

A selective modal scheme for the analysis of EM coupling into or radiation from large open-ended waveguides

A selective modal scheme is proposed to efficiently analyze the problem of high-frequency (HF) electromagnetic (EM) coupling/penetration into or radiation from open-ended waveguides. This scheme is based on the phenomenon that at sufficiently high frequencies, the modes which contribute most significantly to the fields coupled into the waveguide are those whose modal ray directions are most nearly parallel to the incident-wave direction. This concept is illustrated by calculating the EM radiation and backscattering from open-ended parallel-plate, rectangular, circular, and sectoral waveguide geometries. The calculations use the usual geometrical optics, aperture field, and Ufimtsev edge current techniques. Also included are some measured results which further verify the accuracy of the above computations.

Altintas, Ayhan↗

A new analysis of beam waveguide antennas considering the presence of the metal enclosure

Large beam waveguide (BWG) type ground station antennas are generally designed using analysis which ignores the presence of the metallic tube enclosing the beam waveguide mirrors. The common analysis approaches are physical optics and Gaussian mode analyses. The weakness of these analyses is that they do not shed any light with regards to the effect of the metal tube. In this paper, the first known BWG analysis which considers the presence of the metal tube is presented. Numerical results of a two-mirror system using the new analysis are compared with experiments which have verified the new analysis.

Cha, Alan G.↗

Toward a NASA Deep Space Optical Communications System

As discussed at SpaceOps in 2016, we expect the data rates from deep space missions to increase approximately one order of magnitude per decade for the next 50 years. The first order of magnitude improvement will come from existing plans for radio frequency (RF) communications including enhancements to both spacecraft and Deep Space Network (DSN) facilities. The next two orders of magnitude are predicted to come from the introduction of deep space optical communications. Studies indicate that optical receive apertures of between 8m12m are desired. The large cost of dedicated receive telescopes makes this method unrealistic – at least in the near-term. The cost of large optical ground terminals is driven primarily by the cost of the optics and by the cost of a stable structure for the telescope. We propose a novel hybrid design in which existing DSN 34m beam waveguide (BWG) radio antennas can be modified to include an 8m equivalent optical primary. By utilizing a low-cost segmented spherical mirror optical design, pioneered by the optical astronomical community, and by exploiting the already existing extremely stable large radio aperture structures in the DSN, we can minimize both of these cost drivers for implementing large optical communications ground terminals. Two collocated hybrid RF/optical antennas could be arrayed to synthesize the performance of an 11.3m receive aperture to support more capable or more distant space missions or used separately to communicate with two optical spacecraft simultaneously. NASA is in the midst of building six new 34m BWG antennas in the DSN. The final two are planned to be built at the DSN Goldstone, California and Canberra complexes. We are now investigating building these last two antennas as RF/optical hybrids. By delaying their operational dates by two years, we would be able to add the 8m optical receive capability for these two antennas while fitting within existing budgetary constraints. This paper describes the hybrid antenna design, the technical challenges being addressed, and plan for using this concept, together with ongoing work on optical flight terminals, to infuse operation optical communications into deep space missions.

Cornwell, Donald M.↗

Subtleties of nanophotonic lithium niobate waveguides for on-chip evanescent wave sensing

Thin-film lithium niobate (TFLN) is promising for optical sensing due to its high nonlinearities, but its material properties present unique design challenges. We compare the sensing performance of the fundamental modes on a TFLN waveguide with a fluorescent dye sample. The TM mode has better overlap with the sample, with a 1.4 × greater sample absorption rate versus the TE mode. However, the TM mode also scatters at a 1.4 × greater rate, yielding less fluorescence overall. The TE mode is, therefore, more appropriate for sensing. Our findings have important implications for TFLN-based sensor designs.

optics↗

Electro-optic transduction in silicon via gigahertz-frequency nanomechanics

Interfacing electronics with optical fiber networks is key to the long-distance transfer of classical and quantum information. Piezo-optomechanical transducers enable such interfaces by using gigahertz-frequency acoustic vibrations as mediators for converting microwave photons to optical photons via the combination of optomechanical and piezoelectric interactions. However, despite successful demonstrations, efficient quantum transduction remains out of reach due to the challenges associated with hybrid material integration and increased loss from piezoelectric materials when operating in the quantum regime. Here, we demonstrate an alternative approach in which we actuate 5-GHz phonons in a conventional silicon-on-insulator platform. In our experiment, microwave photons resonantly drive a phononic crystal oscillator via the electrostatic force realized in a charge-biased narrow-gap capacitor. The mechanical vibrations are subsequently transferred via a phonon waveguide to an optomechanical cavity, where they transform into optical photons in the sideband of a pump laser field. Operating at room temperature and atmospheric pressure, we measure a microwave-to-optical photon conversion efficiency of 1.72±0.14×10 −7 in a 3.3 MHz bandwidth. Our results mark a stepping stone towards quantum transduction with integrated devices made from crystalline silicon, which promise efficient high-bandwidth operation and integration with superconducting qubits. Additionally, the lack of need for piezoelectricity or other intrinsic nonlinearities makes our approach applicable to a wide range of materials for potential applications beyond quantum technologies.

42 ENGINEERING↗

Frequency selective coupler for integrated optics systems.

A frequency selective coupler which consists of two thin film waveguides imbedded in a periodic medium is studied using the Brillouin diagram. Detailed results for the relative bandwidth and the coupling factor are plotted as a function of normalized frequency for a representative case.

Elachi, C.↗

Coupled Lorenz systems in an optically pumped CH3F laser

The output emission of a short CH3F metallic waveguide laser pumped by an injection-locked CO2 transversely excited atmosphere laser is studied experimentally. The output is found to be extremely unpredictable when lasing occurs in both the excited and ground vibrational states on two separate transitions (496 and 452 microns, respectively). The dynamics and sensitivity to initial conditions are explained in terms of two Lorenz lasers with pump coupled population inversions.

Rabinovich, W. S.↗

Fundamentals and emerging optical applications of hexagonal boron nitride: a tutorial

Hexagonal boron nitride (hBN), also known as white graphite, is a transparent layered crystal with a wide bandgap. Its crystal structure resembles graphite, featuring layers composed of honeycomb lattices held together through van der Waals forces. The layered crystal structure of hBN facilitates exfoliation into thinner flakes and makes it highly anisotropic in in-plane and out-of-plane directions. Unlike graphite, hBN is both insulating and transparent, making it an ideal material for isolating devices from the environment and acting as a waveguide. As a result, hBN has found extensive applications in optical devices, electronic devices, and quantum photonic devices. This comprehensive tutorial aims to provide readers with a thorough understanding of hBN, covering its synthesis, lattice and spectroscopic characterization, and various applications in optoelectronic and quantum photonic devices. This tutorial is designed for both readers without prior experience in hBN and those with expertise in specific fields seeking to understand its relevance and connections to others.

36 MATERIALS SCIENCE↗