Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Optical and electrical properties of indium tin oxide films near their laser damage threshold [Electrical and optical properties of indium tin oxide films under multi-pulse laser irradiation at 1064 nm]

In this paper, we investigated whether the optical and electrical properties of indium tin oxide (ITO) films are degraded under laser irradiation below their laser ablation threshold. While performing multi-pulse laser damage experiments on a single ITO film (4.7 ns, 1064 nm, 10 Hz), we examined the optical and electrical properties in situ . A decrease in reflectance was observed prior to laser damage initiation. However, under sub-damage threshold irradiation, conductivity and reflectance of the film were maintained without measurable degradation. This indicates that ITO films in optoelectronic devices may be operated below their lifetime laser damage threshold without noticeable performance degradation.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Optical Filter Assembly for Interplanetary Optical Communications

Ground-based, narrow-band, high throughput optical filters are required for optical links from deep space. We report on the development of a tunable filter assembly that operates at telecommunication window of 1550 nanometers. Low insertion loss of 0.5 decibels and bandwidth of 90 picometers over a 2000 nanometers operational range of detectors has been achieved.

optical filters↗
DOE OSTI2019

Comparative performance analysis of relative humidity sensor based on intermodal interference using tapered square no-core optical fiber and tapered cylindrical optical fiber

This work presents the computational evaluation of a new model for relative humidity sensor based on the principle of intermodal interference using a square-section no-core tapered optical fiber compared to a classical cylindrical tapered optical fiber sensor. Attempting at a new application of this type of sensor, simulations were carried out in the range of up to 60% of relative humidity, the main interest range of the pharmaceutical industry. Several materials were used in its modeling and an analysis was developed in its constructive dimensions, in order to verify the influence of each of them on the sensor performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Investigations of Polymethacrylate Tribochemical Films Using X-Ray Spectroscopy and Optical Profilometry

This study investigates the elemental composition and surface morphology of solid tribochemical films formed on steel surfaces. The reversible addition-fragmentation chain transfer (RAFT) method was used to synthesize nine different metal-free polymers, which were blended into commercial base oils. The polymers were either homopolymers of dodecyl methacrylate and ethylhexyl methacrylate or were co-polymers of these monomers with six polar monomers. After tribological testing at 100 degrees C using the ball-on-flat geometry, the resulting tribochemical films were imaged using scanning electron microscopy (SEM) and optical microscopy. The resulting tribochemical films have thicknesses around 50-100 nm. Two of the films corresponding to small (P1-imidazole-containing copolymer) and large (P3-less polar homopolymer) wear were cross-sectioned using focused ion beam (FIB) and analyzed for elemental composition using energy-dispersive X-Ray (EDX) mapping. Oxygen and nitrogen enrichment was observed, consistent with the relative chemical composition of the precursor polymers. Transmission electron microscopy (TEM) evidence suggests that at the worn surface, some organic elements penetrate or are mixed into the steel substrate giving an interlocking appearance. The two samples examined with TEM showed that P1 tribofilm is diffused or mixed with the steel substrate more so than P3, suggesting a stronger affinity and contact during tribofilm formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Wave like signatures in aerosol optical depth and associated radiative impacts over the central Himalayan region

Doppler Lidar and Multi-Filter Rotating Shadowband Radiometer (MFRSR) observations are utilized to show wave like signatures in aerosol optical depth (AOD) during daytime boundary layer evolution over the Himalayan region. Fourier analysis depicted 60–80 min periods dominant during afternoon hours, implying that observed modulations could be plausible reason for the AOD forenoon–afternoon asymmetry which was previously reported. Inclusion of wave amplitude in diurnal variation of aerosol radiative forcing estimates showed ~40% additional warming in the atmosphere relative to mean AOD. The present observations emphasize the importance of wave induced variations in AOD and radiation budget over the site.

Aerosol optical depth↗
DOE OSTI2018

Automated Algorithms for Band Gap Analysis from Optical Absorption Spectra

As high-throughput combinatorial experimental methods become more common, the technical challenge is shifting from producing materials to dealing with increasingly large datasets. One of the most important metrics to determine suitability of semiconductor materials for various applications is the band gap. This paper discusses automated algorithms for determining band gaps from optical absorption spectra. The algorithms are applied to a database of 34,313 optical absorption spectra, and selected results are compared to published theoretical and experimental band gap data from 16 materials sets. The best algorithm determines the band gaps with an accuracy of 0.37 eV for direct- and 0.93 eV for indirect band gaps for >20,000 spectra.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Excited-State Dynamics and Nonlinear Optical Properties of Hyperpolarizable Chromophores Based on Conjugated Bis(terpyridyl)Ru(II) and Palladium and Platinum Porphyrinic Components: Impact of Heavy Metals upon Supermolecular Electro-Optic Properties

A new series of strongly coupled oscillators based upon (porphinato)Pd, (porphinato)Pt, and bis(terpyridyl)-ruthenium(II) building blocks is described. These RuPPd, RuPPt, RuPPdRu, and RuPPtRu chromophores feature bis- (terpyridyl)Ru(II) moieties connected to the (porphinato)metal unit via an ethyne linker that bridges the 4!-terpyridyl and porphyrin macrocycle meso-carbon positions. Pump–probe transient optical data demonstrate sub-picosecond excited singlet-to-triplet-state relaxation. The relaxed lowest-energy triplet (T 1 ) excited states of these chromophores feature absorption manifolds that span the 800–1200 nm spectral region, microsecond triplet-state lifetimes, and large absorptive extinction coefficients [ε(T 1 → T n ) > 4 × 10 4 M –1 cm –1 ]. Dynamic hyperpolarizability (β λ ) values were determined from hyper-Rayleigh light scattering (HRS) measurements carried out at several incident irradiation wavelengths over the 800–1500 nm spectral region. Relative to benchmark RuPZn and RuPZnRu chromophores which showed large βHRS values over the 1200–1600 nm range, RuPPd, RuPPt, RuPPdRu, and RuPPtRu displayed large βHRS values over the 850–1200 nm region. Generalized Thomas–Kuhn sum (TKS) rules and experimental hyperpolarizability values were utilized to determine excited state-to-excited state transition dipole terms from experimental electronic absorption data and thus assessed frequency-dependent β λ values, including two- and three-level contributions for both β zzz and β xzx tensor components to the RuPPd, RuPPt, RuPPdRu, and RuPPtRu hyperpolarizability spectra. Furthermore, these analyses qualitatively rationalize how the βzzz and βxzx tensor elements influence the observed irradiation wavelength-dependent hyperpolarizability magnitudes. The TKS analysis suggests that supermolecules related to RuPPd, RuPPt, RuPPdRu, and RuPPtRu will likely feature intricate dependences of experimentally determined βHRS values as a function of irradiation wavelength that derive from substantial singlet–triplet mixing, and complex interactions among multiple different β tensor components that modulate the long wavelength regime of the nonlinear optical response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

ZnxMn1-xO Solid Solutions in the Rocksalt Structure: Optical, Charge Transport, and Photoelectrochemical Properties

Theoretical predictions of ZnO:MnO solid solutions (abbreviated here as ZMO) with the rocksalt-type structure suggest improved visible light absorption and suitable band edge positions for the overall water splitting reaction, but experimental efforts to produce such phases are limited by the low solubility of Zn within this structure type. Here, we produce solid solutions of ZnxMn1-xO, with x = 0.5 and 0.3 in the metastable rocksalt phase, using high-pressure and high-temperature (HPHT) techniques. X-ray diffraction and electron microscopy methods were employed to determine the crystal structure, chemical composition, and homogeneity on the submicron scale. The solid solutions exhibit increased optical absorbance in the visible spectral range as compared to those of the parent oxides ZnO and MnO. Our theoretical calculations for ZnxMn1-xO with x = 0.5, 0.25 predict band gaps of 2.53 and 2.98 eV, respectively, with an unusually large band gap bowing. Our calculations also show small effective electron mass for these materials indicating their potential for solar energy applications. Initial photoelectrochemical tests reveal that ZMO solid solutions are suitable for water oxidation and warrant further experimental optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Ellipsometric characterization and density-functional theory analysis of anisotropic optical properties of single-crystal α-SnS

We report on the anisotropic optical properties of single-crystal tin monosulfide (SnS). The components ε{sub a}, ε{sub b}, and ε{sub c} of the pseudodielectric-function tensor (ε)=(ε₁)+i(ε₂) spectra are taken from 0.73 to 6.45 eV by spectroscopic ellipsometry. The measured (ε) spectra are in a good agreement with the results of the calculated dielectric response from hybrid density functional theory. The (ε) spectra show the direct band-gap onset and a total of eight above-band-gap optical structures that are associated with the interband-transition critical points (CPs). We obtain accurate CP energies by fitting analytic CP expressions to second-energy-derivatives of the (ε) data. Their probable electronic origins and implications for photovoltaic applications are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Terahertz magneto-optical spectroscopy of a two-dimensional hole gas

Two-dimensional hole gases (2DHGs) have attracted recent attention for their unique quantum physics and potential applications in areas including spintronics and quantum computing. However, their properties remain relatively unexplored, motivating the use of different techniques to study them. We then used terahertz magneto-optical spectroscopy to investigate the cyclotron resonance frequency in a high mobility 2DHG, revealing a nonlinear dependence on the applied magnetic field. This is shown to be due to the complex non-parabolic valence band structure of the 2DHG, as verified by multiband Landau level calculations. We also found that impurity scattering dominates cyclotron resonance decay in the 2DHG, in contrast with the dominance of superradiant damping in two-dimensional electron gases. Our results shed light on the properties of 2DHGs, motivating further studies of these unique 2D nanosystems.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Terahertz wave electro-optic measurements with optical spectral filtering

We propose electro-optic detection techniques based on variations of the laser pulse spectrum induced during pulse co-propagation with terahertz wave radiation in a nonlinear crystal. Quantitative comparison with two other detection methods is made. Substantial improvement of the sensitivity compared to the standard electro-optic detection technique (at high frequencies) and to the previously shown technique based on laser pulse energy changes is demonstrated in experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗