Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORGANIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Probing charge transfer characteristics in a donor–acceptor metal–organic framework by Raman spectroelectrochemistry and pressure-dependence studies

The stimuli responsive behaviour of charge transfer donor–acceptor metal–organic frameworks (MOFs) remains an understudied phenomenon which may have applications in tuneable electronic materials. We now report the modification of donor–acceptor charge transfer characteristics in a semiconducting tetrathiafulvalene–naphthalene diimide-based MOF under applied electrochemical bias and pressure. Here, we employ a facile solid state in situ Raman spectroelectrochemical technique, applied for the first time in the characterisation of electroactive MOFs, to monitor the formation of a new complex TTFTC˙+–DPNI from a largely neutral system, upon electrochemical oxidation of the framework. In situ pressure-dependent Raman spectroscopy and powder X-ray diffraction experiments performed in a diamond anvil cell revealed blue shifts in the donor and acceptor vibrational modes in addition to contractions in the unit cell which are indicative of bond shortening. This study demonstrates the utility of in situ Raman spectroscopic techniques in the characterisation of redox-active MOFs and the elucidation of their electronic behaviours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coordination-supported organic polymers: mesoporous inorganic–organic materials with preferred stability

Here, a simple and versatile strategy, borrowing ideas from the chemistry of MOFs and COFs, is developed for the synthesis of coordination-supported organic polymers (COPs) via coordination between Al 3+ and 5-amino-8-hydroxyquinoline together with organic imine- or imide-based polycondensation. The COPs with high surface areas (up to 1123 m 2 g -1 ) and abundant mesopores (2.5 nm or 14 nm) possess good crystalline and porous structure after being soaked in boiling water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local order, disorder, and everything in between: using 91 Zr solid-state NMR spectroscopy to probe zirconium-based metal–organic frameworks

Characterization of metal centers in metal–organic frameworks (MOFs) is critical for rational design and further understanding of structure–property relationships. The short-range structure about Zr atoms is challenging to properly elucidate in many Zr MOFs, particularly when local disorder is present. Static 91 Zr solid-state NMR spectra of the seven zirconium MOFs UiO-66, UiO-66-NH 2 , UiO-67, MOF-801, MOF-808, DUT-68 and DUT-69 have been acquired at high magnetic fields of 35.2 T and 19.6 T, yielding valuable information on the local structure, site symmetry and order about Zr. 91 Zr NMR is very sensitive to differences in MOF short-range structure caused by guest molecules, linker substitution and post-synthetic treatment. Complementary density functional theory (DFT) calculations assist in the interpretation and assignment of 91 Zr solid-state NMR spectra, lend insight into structural origins of 91 Zr NMR parameters and enable determination of local Zr coordination environments. This approach can be extended to many other materials containing zirconium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance organic field-effect transistors with ultra-thin HfO{sub 2} gate insulator deposited directly onto the organic semiconductor

We have produced stable organic field-effect transistors (OFETs) with an ultra-thin HfO{sub 2} gate insulator deposited directly on top of rubrene single crystals by atomic layer deposition (ALD). We find that ALD is a gentle deposition process to grow thin films without damaging rubrene single crystals, as results these devices have a negligibly small threshold voltage and are very stable against gate-bias-stress, and the mobility exceeds 1 cm{sup 2}/V s. Moreover, the devices show very little degradation even when kept in air for more than 2 months. These results demonstrate thin HfO{sub 2} layers deposited by ALD to be well suited as high capacitance gate dielectrics in OFETs operating at small gate voltage. In addition, the dielectric layer acts as an effective passivation layer to protect the organic semiconductor.

36 MATERIALS SCIENCE↗

Multichromophoric energy sensitization of C60 for organic photovoltaics

In organic photovoltaics (OPVs), photocurrent generation is limited by absorption and exciton diffusion in the active layer. In this work, we describe the energy sensitization of C 60 simultaneously by two chromophores at high volume concentrations (50%). This sensitization strategy takes advantage of the intense absorption of the sensitizers and the exceptional electron conduction and exciton diffusion length of C 60 resulting in a 30% increase in photoresponse of the C 60 -based sensitized acceptor layer between $λ$ = 450 nm and 670 nm and power conversion efficiency under simulated AM 1.5G illumination. In (2,4-bis[4-(N,N-diphenylamino)-2,6- dihydroxyphenyl] squaraine)/C 60 devices, sensitization results in an increase in J SC from 6.5 ± 0.2 mA/cm 2 to 8.6 ± 0.2 mA/cm 2 without compromising V OC or FF. These results demonstrate the robust nature of this sensitization scheme and its broad potential for application in OPVs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferromagnetic-organic interfacial states and their role on low voltage current injection in tris-8-hydroxyquinloline (Alq{sub 3}) organic spin valves

Organic Spin Valves (OSVs) operate at small bias (<100 mV) when carrier injection should not occur due to injection barriers and in built potentials. We explore the consequences of hybrid-interface states between a ferromagnetic electrode and an organic semiconductor in OSV carrier injection. By temperature-dependent Dark Injection measurements, we observe hole trapping due to these filled states and measure a low thermal activation energy (∼100 meV) of the carrier density within OSVs. The small injection barrier is consistent with a significant interfacial potential, due to hybrid-interface state filling, overcoming the injection barrier due to the electrode work function—transport level mismatch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A systematic benchmark of the ab initio Bethe-Salpeter equation approach for low-lying optical excitations of small organic molecules

The predictive power of the ab initio Bethe-Salpeter equation (BSE) approach, rigorously based on many-body Green’s function theory but incorporating information from density functional theory, has already been demonstrated for the optical gaps and spectra of solid-state systems. Interest in photoactive hybrid organic/inorganic systems has recently increased and so has the use of the BSE for computing neutral excitations of organic molecules. However, no systematic benchmarks of the BSE for neutral electronic excitations of organic molecules exist. Here, we study the performance of the BSE for the 28 small molecules in Thiel’s widely used time-dependent density functional theory benchmark set [Schreiber et al., J. Chem. Phys. 128, 134110 (2008)]. We observe that the BSE produces results that depend critically on the mean-field starting point employed in the perturbative approach. We find that this starting point dependence is mainly introduced through the quasiparticle energies obtained at the intermediate GW step and that with a judicious choice of starting mean-field, singlet excitation energies obtained from BSE are in excellent quantitative agreement with higher-level wavefunction methods. The quality of the triplet excitations is slightly less satisfactory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lamination of organic solar cells and organic light emitting devices: Models and experiments

In this paper, a combined experimental, computational, and analytical approach is used to provide new insights into the lamination of organic solar cells and light emitting devices at macro- and micro-scales. First, the effects of applied lamination force (on contact between the laminated layers) are studied. The crack driving forces associated with the interfacial cracks (at the bi-material interfaces) are estimated along with the critical interfacial crack driving forces associated with the separation of thin films, after layer transfer. The conditions for successful lamination are predicted using a combination of experiments and computational models. Guidelines are developed for the lamination of low-cost organic electronic structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of electrochemical lithiation of a metal-organic framework without redox-active nodes

Metal-organic frameworks (MOFs) have many potential uses for separations, storage, and catalysis, but their use as intercalation hosts for batteries has been scarce. In this article, we examine the mechanism of Li insertion in a MOF to provide guidance to future design efforts in this area. As a model system, we choose UiO-66, a MOF with the formula (Zr{sub 6}O{sub 4}(OH){sub 4}){sub 4}(1,4-benzenedicarboxylate){sub 6}, as an electrode material for lithium-ion batteries; this MOF is of special interest because the zirconium is not redox active. We report both quantum mechanical characterization of the mechanism and experimental studies in which the material is synthesized as nanoparticles to reduce diffusion lengths for lithium ions and increase the contact area with a conductive carbon phase. The calculated changes in the IR spectra of UiO-66 and lithiated UiO-66 are consistent with the experimental FTIR results. We found experimentally that this MOF can maintain a specific discharge capacity of at least 118 mAh/g for 30 lithiation and delithiation cycles at a rate of C/5, exhibiting good cyclability. Density functional electronic structure calculations show that the charge transfer during lithiation is mainly from Li to node oxygens and carboxylate oxygens, that is, it involves anions rather than cations or aromatic rings, and they provide a mechanistic understanding of the potential for increased Li capacity because the theoretical capacity of UiO-66 with Li at the oxygens in the metal oxide nodes and the carboxylate linkers is more than 400 mAh/g. The lithiation process greatly decreases the bandgap of UiO-66, which is expected to increase its electronic conductivity. The electrode material was also characterized by X-ray diffraction and scanning electron microscopy, which were consistent in confirming that smaller particle sizes were obtained in lower-temperature syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonthermal Site Occupation at the Donor-Acceptor Interface of Organic Solar Cells

Here, we investigate the nature of occupation and relaxation within the charge transfer density of states (CT DOS) for bulk heterojunction organic solar cells consisting of the donor boron subphthalocyanine chloride and the acceptor C 60 . We observe relaxation of geminate CT states on a sub-ns timescale via an approximately 70-meV dynamic redshift in their photoluminescence, whereas free carrier relaxation at longer times leads to the formation of nongeminate CT states at even lower energy. In steady state, we find that thermalization within the DOS is incomplete, resulting in a Boltzmann-like CT state distribution characterized by an effective temperature above that of the ambient. These findings confirm that electron and hole populations can be far from equilibrium in organic solar cells and may prompt a reassessment of analyses that assume the same temperature for their charge-carrier distributions in the dark and under illumination.

14 SOLAR ENERGY↗

Soils' dirty little secret: Depth–based comparisons can be inadequate for quantifying changes in soil organic carbon and other mineral soil properties

Quantifying changes in soil organic carbon (SOC) stocks and other soil properties is essential for understanding how soils will respond to land management practices and global change. Although they are widely used, comparisons of SOC stocks at fixed depth (FD) intervals are subject to errors when changes in bulk density or soil organic matter occur. The equivalent soil mass (ESM) method has been recommended in lieu of FD for assessing changes in SOC stocks in mineral soils, but ESM remains underutilized for SOC stocks and has rarely been used for other soil properties. In this paper, we draw attention to the limitations of the FD method and demonstrate the advantages of the ESM approach. We provide illustrations to show that the FD approach is susceptible to errors not only for quantifying SOC stocks but also for soil mass-based properties such as SOC mass percent, C:N mass ratio, and δ 13 C. Here we describe the ESM approach and show how it mitigates the FD method limitations. Using bulk density change simulations applied to an empirical dataset from bioenergy cropping systems, we show that the ESM method provides consistently lower errors than FD when quantifying changes in SOC stocks and other soil properties. To simplify the use of ESM, we detail how the method can be integrated into sampling schemes, and we provide an example R computer script that can perform ESM calculations on large datasets. We encourage future studies, whether temporal or comparative, to utilize sampling methods that are amenable to the ESM approach. Overall, we agree with previous recommendations that ESM should be the standard method for evaluating SOC stock changes in mineral soils, but we further suggest that ESM may also be preferred for comparisons of other soil properties including mass percentages, elemental mass ratios, and stable isotope composition.

59 BASIC BIOLOGICAL SCIENCES↗

Covalent organic frameworks comprising cobalt porphyrins for catalytic CO 2 reduction in water

Conversion of carbon dioxide (CO2) to carbon monoxide (CO) and other value-added carbon products is an important challenge for clean energy research. Here we report modular optimization of covalent organic frameworks (COFs), in which the building units are cobalt porphyrin catalysts linked by organic struts through imine bonds, to prepare a catalytic material for aqueous electrochemical reduction of CO2 to CO. The catalysts exhibit high Faradaic efficiency (90%) and turnover numbers (up to 290,000, with initial turnover frequency of 9400 hour-1) at pH 7 with an overpotential of –0.55 volts, equivalent to a 26-fold improvement in activity compared with the molecular cobalt complex, with no degradation over 24 hours. X-ray absorption data reveal the influence of the COF environment on the electronic structure of the catalytic cobalt centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Indexing Permafrost Soil Organic Matter Degradation Using High-Resolution Mass Spectrometry

Microbial degradation of soil organic matter (SOM) is a key process for terrestrial carbon cycling, although the molecular details of these transformations remain unclear. This study reports the application of ultrahigh resolution mass spectrometry to profile the molecular composition of SOM and its degradation during a simulated warming experiment. A soil sample, collected near Barrow, Alaska, USA, was subjected to a 40-day incubation under anoxic conditions and analyzed before and after the incubation to determine changes of SOM composition. A CHO index based on molecular C, H, and O data was utilized to codify SOM components according to their observed degradation potentials. Compounds with a CHO index score between –1 and 0 in a water-soluble fraction (WSF) demonstrated high degradation potential, with a highest shift of CHO index occurred in the N-containing group of compounds, while similar stoichiometries in a base-soluble fraction (BSF) did not. Additionally, compared with the classical H:C vs O:C van Krevelen diagram, CHO index allowed for direct visualization of the distribution of heteroatoms such as N in the identified SOM compounds. We demonstrate that CHO index is useful not only in characterizing arctic SOM at the molecular level but also enabling quantitative description of SOM degradation, thereby facilitating incorporation of the high resolution MS datasets to future mechanistic models of SOM degradation and prediction of greenhouse gas emissions.

Environmental Molecular Sciences Laboratory↗

Interplay of Metalloligand and Organic Ligand to Tune Micropores within Isostructural Mixed-Metal Organic Frameworks (M MOFs) for Their Highly Selective Separation of Chiral and Achiral Small Molecules

Four porous isostructural mixed-metal-organic frameworks (M'MOFs) have been synthesized and structurally characterized. The pores within these M'MOFs are systematically tuned by the interplay of both the metalloligands and organic ligands which have enabled us not only to direct their highly selective separation of chiral alcohols 1-phenylethanol (PEA), 2-butanol (BUT), and 2-pentanol (2-PEN) with the highest ee up to 82.4% but also to lead highly selective separation of achiral C{sub 2}H{sub 2}/C{sub 2}H{sub 4} separation. The potential application of these M'MOFs for the fixed bed pressure swing adsorption (PSA) separation of C{sub 2}H{sub 2}/C{sub 2}H{sub 4} has been further examined and compared by the transient breakthrough simulations in which the purity requirement of 40 ppm in the outlet gas can be readily fulfilled by the fixed bed M'MOF-4a adsorber at ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating Chemical Environments of Metal–Organic Framework-Supported Molybdenum(VI) Catalysts for Insights into the Structure–Activity Relationship in Cyclohexene Epoxidation

Solid supports are crucial in heterogeneous catalysis due to their profound effects on catalytic activity and selectivity. However, elucidating the specific effects arising from such supports remains challenging. We selected a series of metal–organic frameworks (MOFs) with 8-connected Zr 6 nodes as supports to deposit molybdenum(VI) onto to study the effects of pore environment and topology on the resulting Mo-supported catalysts. As characterized by X-ray absorption spectroscopy (XAS) and single-crystal X-ray diffraction (SCXRD), we modulated the chemical environments of the deposited Mo species. For Mo-NU-1000, the Mo species monodentately bound to the Zr 6 nodes were anchored in the microporous c-pore, but for Mo-NU-1008 they were bound in the mesopore of Mo-NU-1008. Both monodentate and bidentate modes were found in the mesopore of Mo-NU-1200. Cyclohexene epoxidation with H 2 O 2 was probed to evaluate the support effect on catalytic activity and to unveil the resulting structure–activity relationships. SCXRD and XAS studies demonstrated the atomically precise structural differences of the Mo binding motifs over the course of cyclohexene epoxidation. No apparent structural change was observed for Mo-NU-1000, whereas the monodentate mode of Mo species in Mo-NU-1008 and the monodentate and bidentate Mo species in Mo-NU-1200 evolved to a new bidentate mode bound between two adjacent oxygen atoms from the Zr 6 node. This work demonstrates the great advantage of using MOF supports for constructing heterogeneous catalysts with modulated chemical environments of an active species and elucidating structure–activity relationships in the resulting reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗