Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Nanosized copper ferrite materials: Mechanochemical synthesis and characterization

Nanodimensional powders of cubic copper ferrite are synthesized by two-steps procedure of co-precipitation of copper and iron hydroxide carbonates, followed by mechanochemical treatment. X-ray powder diffraction, Moessbauer spectroscopy and temperature-programmed reduction are used for the characterization of the obtained materials. Their catalytic behavior is tested in methanol decomposition to hydrogen and CO and total oxidation of toluene. Formation of nanosized ferrite material is registered even after one hour of milling time. It is established that the prolonging of treatment procedure decreases the dispersion of the obtained product with the appearance of Fe{sub 2}O{sub 3}. It is demonstrated that the catalytic behavior of the samples depends not only on their initial phase composition, but on the concomitant ferrite phase transformations by the influence of the reaction medium. -- Graphical abstract: It is demonstrated that the catalytic behavior of the obtained copper ferrites depends not only on their initial phase composition, but on the concomitant phase transformations by the influence of the reaction medium. Display Omitted Highlights: {yields} Two-step co-precipitation-ball-milling procedure for copper ferrites preparation. {yields} The phase composition of ferrites depends on the milling duration. {yields} Ferrites transforms under the reaction medium, which affects their catalytic behavior. {yields} Ferrites decompose to magnetite and carbides during methanol decomposition. {yields} Agglomeration and further crystallization of ferrite occur during toluene oxidation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective decoration of nickel and nickel oxide nanocrystals on multiwalled carbon nanotubes

A simple route to selective decoration of nickel and nickel oxide nanocrystals on multiwalled carbon nanotubes (MWCNTs) using nickel acetylacetonate (NAA) was successfully achieved for the first time. The homogeneously decorated nanocrystals on MWCNTs were investigated for their structure and morphology by various techniques, such as powder X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, field emission scanning electron microscopy and thermogravimetric analysis. It was found that the size distributions of the nanocrystals on MWCNTs ranged from 8 to 15 nm and they were well resolved. The precursor, NAA, was effectively employed to impregnate the MWCNTs, which on calcination at suitable temperatures and in the presence of hydrogen and nitrogen atmosphere gave rise to nickel and nickel oxide nanocrystals, respectively. -- Graphical abstract: Nickel and nickel oxide nanocrystals were selectively and homogeneously decorated on multiwalled carbon nanotubes using nickel acetylacetonate, as a precursor in a simple and efficient route. Display Omitted Highlights: {yields} A simple route for decoration of nickel and nickel oxide nanocrystals on MWCNTs. {yields} Nickel acetylacetonate used as nickel source for the first time to impregnate on MWCNTs. {yields} Selective decoration was achieved by calcination in hydrogen and nitrogen atmospheres. {yields} The as-decorated nickel and nickel oxide nanocrystals are in the range of 8-15 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

First-principles study of the electronic and magnetic properties of oxygen-deficient rutile TiO{sub 2}(1 1 0) surface

Based on first-principles electronic structure calculations we find that the bridging oxygen vacancies on the (1 1 0) surface is more favorable and may be responsible for the unexpected ferromagnetism in undoped rutile TiO{sub 2}. Our results show that the ferromagnetism largely originates from the d orbitals of low-charge-state Ti ions converted from Ti{sup 4+} ions induced by the surface oxygen vacancies. The second-nearest neighbors of these ions (fivefold coordinated Ti) also contribute to the total magnetic moments. The spins induced by the local oxygen vacancies form a ferromagnetic arrangement. -- Graphical Abstract: The study investigates the magnetic properties of the oxygen-deficient rutile TiO{sub 2}(1 1 0) surface from first principle calculations. The adjacent oxygen vacancies form a ferromagnetic arrangement due to the double exchange interaction. Display Omitted Highlights: {yields} There should be more V{sub O}'s than V{sub Ti}'s on the (1 1 0) surface layer of TiO{sub 2}. {yields} Magnetic moments induced by the isolated V{sub O} form a paramagnetic arrangement. {yields} Magnetic moments induced by the concentrated V{sub O}'s form a ferromagnetic arrangement. {yields} Double exchange is the dominant coupling mechanism of the ferromagnetism.

36 MATERIALS SCIENCE↗

Phase stability and chemical composition dependence of the thermoelectric properties of the type-I clathrate Ba{sub 8}Al{sub x}Si{sub 46-x} (8{<=}x{<=}15)

Phase stability of the type-I clathrate compound Ba{sub 8}Al{sub x}Si{sub 46-x} and the thermoelectric property dependence on chemical composition are presented. Polycrystalline samples were prepared by argon arc melting and annealing. Results of powder X-ray diffraction and electron microprobe analysis show that the type-I structure is formed without framework deficiency for 8{<=}x{<=}15. Lattice constant a increases linearly with the increase of x. Thermoelectric properties were measured for x=12, 14 and 15. The Seebeck coefficients are negative, with the absolute values increasing with x. The highest figure of merit zT=0.24 was observed for x=15 at T=1000 K, with carrier electron density n=3x10{sup 21} cm{sup -3}. A theoretical calculation based on the single parabolic band model reveals the optimum carrier concentration to be n{approx}4x10{sup 20} cm{sup -3}, where zT{approx}0.7 at T=1000 K is predicted. -- Graphical Abstract: Ba{sub 8}Al{sub x}Si{sub 46-x} is found to crystallize in the type-I clathrate structure without framework deficiency for 8{<=}x {<=}15. Thermoelectric figure of merit reaches zT=0.24 for x=15 at 1000 K, and calculation predicts zT{approx}0.7 for a lower carrier concentration. Display Omitted Highlights: {yields} Phase relation of the type-I clathrate Ba{sub 8}Al{sub x}Si{sub 46-x} is clarified. {yields} Thermoelectric performance becomes higher with the increase of Al content x. {yields} Low lattice thermal conductivity comparable to glasses is observed. {yields} Figure of merit zT=0.7 is predicted from calculation at the carrier concentration n{approx}4x10{sup 20} cm{sup -3}.

36 MATERIALS SCIENCE↗

Two new frameworks of potassium saccharate obtained from acidic and alkaline solution

Two chiral K(I) complexes based on D-saccharic acid (H{sub 2}sac), [K(Hsac)]{sub n} (1) and [K{sub 2}(sac)]{sub n} (2) were obtained from acidic and alkaline solution. The 3D framework of 1 includes K(I) polyhedral rods and typical pairwise coaxial right- and left-handed helical chains, and displays binodal 6-connected pcu topology. 2 contains 2D polyhedral sheets consisting of left-handed helical chains, and generates 3D network with an unprecedented (7,11)-connected net. Cyclic voltammetry tests and charge-discharge tests indicate that the addition of complex 2 to the electrolyte could improve the electrochemical properties of the nickel hydroxide electrode. -- Graphical abstract: Two K(I) complexes based on D-saccharic acid (H{sub 2}sac), [K(Hsac)]{sub n} (1) and [K{sub 2}(sac)]{sub n} (2) were obtained and characterized. Electrochemical studies indicate the potential use of 2 in Ni-MH battery. Display Omitted highlights: > Two novel chiral K(I) frameworks based on D-saccharic acid were obtained. > The structure of 1 includes K(I) polyhedral rods and typical helical chains. > 2 contains 2D polyhedral sheets and generates an unprecedented (7,11)-connected net. > Addition of 2 to electrolyte could improve the nickel hydroxide electrode's property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aurivillius phases of PbBi{sub 4}Ti{sub 4}O{sub 15} doped with Mn{sup 3+} synthesized by molten salt technique: Structure, dielectric, and magnetic properties

Doping of manganese (Mn{sup 3+}/Mn{sup 4+}) into the Aurivillius phase Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} was carried out using the molten salt technique for various Mn concentrations (x=0, 0.2, 0.4, 0.6, 0.8, and 1). Single phase samples could be obtained in the composition range with x up to 0.6 as confirmed by X-ray and neutron diffraction analysis. Dielectric measurements show a peak at 801, 803, 813 and 850 K for samples with x=0, 0.2, 0.4, and 0.6, respectively, related to the ferroelectric transition temperature (T{sub c}). The main contribution of the in-plane polarization for x{<=}0.2 which was calculated from the atomic positions obtained by the structure analysis is the dipole moment in the Ti(1)O{sub 6} layer; however, for x{>=}0.4 the polarization originates from the dipole moment in the Ti(2)O{sub 6} layer. Mn doping in the Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} does not show any long range magnetic ordering. -- Graphical abstract: The dipole moment of TiO{sub 6} dependence of x in Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} (0{<=}x{<=}0.6): (a) along a-axis and (b) on the ab plane. This figure indicated that polarization in the ab-plane contribute to the total polarization. Display Omitted Highlights: {yields} We have prepared Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15}, 0{<=}x{<=}1 by the molten-salt method. {yields} The oxides adopted A2{sub 1}am space group. {yields} Dipole moments of the inner Ti(1)O{sub 6} are the main polarization contributor for x{<=}0.2. {yields} Dipole moments of the outer Ti(2)O{sub 6} are the main polarization contributor for x>0.2. {yields} Ferromagnetic interactions show the contribution of mixed valence of Mn{sup 3+}/Mn{sup 4+}.

36 MATERIALS SCIENCE↗

Role of SrMoO{sub 4} in Sr{sub 2}MgMoO{sub 6} synthesis

Here we investigate the elemental and phase compositions during the solid-state synthesis of the promising SOFC-anode material, Sr{sub 2}MgMoO{sub 6}, and demonstrate that molybdenum does not notably evaporate under the normal synthesis conditions with temperatures up to 1200 {sup o}C due to the formation of SrMoO{sub 4} as an intermediate product at low temperatures, below 600 {sup o}C. However, partial decomposition of the Sr{sub 2}MgMoO{sub 6} phase becomes evident at the higher temperatures ({approx}1500 {sup o}C). The effect of SrMoO{sub 4} on the electrical conductivity of Sr{sub 2}MgMoO{sub 6} is evaluated by preparing a series of Sr{sub 2}MgMoO{sub 6} samples with different amounts of additional SrMoO{sub 4}. Under the reducing operation conditions of an SOFC anode the insulating SrMoO{sub 4} phase is apparently reduced to the highly conductive SrMoO{sub 3} phase. Percolation takes place with 20-30 wt% of SrMoO{sub 4} in a Sr{sub 2}MgMoO{sub 6} matrix, with a notable increase in electrical conductivity after reduction. Conductivity values of 14, 60 and 160 S/cm are determined at 800 {sup o}C in 5% H{sub 2}/Ar for the Sr{sub 2}MgMoO{sub 6} samples with 30, 40 and 50 wt% of added SrMoO{sub 4}, respectively. -- Graphical abstract: SrMoO{sub 4} is formed at low temperatures during the synthesis of Sr{sub 2}MgMoO{sub 6}, which prevents the volatilization of Mo from typical precursor mixtures of this promising SOFC anode material. SrMoO{sub 4} is insulating and it is often found as an impurity in Sr{sub 2}MgMoO{sub 6} samples. It is however readily reduced to highly conducting SrMoO{sub 3}. Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show increased electrical conductivities compared to pure Sr{sub 2}MgMoO{sub 6} under the reductive operation conditions of an SOFC anode. Display Omitted Highlights: {yields} Sr{sub 2}MgMoO{sub 6} is a promising SOFC anode material. {yields} During the Sr{sub 2}MgMoO{sub 6} synthesis SrMoO{sub 4} is formed at low temperatures. {yields} Formation of SrMoO{sub 4} effectively prevents volatilization of Mo at high temperatures. {yields} Insulating SrMoO{sub 4} reduces to highly conductive SrMoO{sub 3} under SOFC-anode conditions. {yields} Composites of Sr{sub 2}MgMoO{sub 6} and SrMoO{sub 3} show high electrical conductivities.

36 MATERIALS SCIENCE↗

A series of M-M' heterometallic coordination polymers: syntheses, structures and surface photoelectric properties (M=Ni/Co, M'=Cd/Zn)

Four new heterometallic polymers, [NiCd(mal){sub 2}(H{sub 2}O){sub 2}]n.2nH{sub 2}O 1, [NiZn{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 2, [CoCd{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 3, [CoZn{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 4 (H{sub 2}mal=malonic acid, H{sub 4}cit=citric acid) were synthesized and characterized. The photoelectric properties of the polymers were discussed by the surface photovoltage spectroscopy (SPS). The structural analyses indicate 1 is a Ni-Cd heterometallic polymer with 3D structure bridged by the mal{sup 2-} group. 2-4 are all heterometallic polymers with 2D structures bridged by the Hcit{sup 3-} group. The results of SPS for the four polymers reveal that there are wide photovoltage response bands in the range of 300-800 nm, which indicates that they all possess photoelectric conversion properties. By the introduction of the other metals, the SPS of heterometallic polymers are broadened obviously than the SPS of monometallic complexes. Moreover, the relationships between SPS and UV-Vis absorption spectra have been discussed. -- Graphical Abstract: Four heterometallic polymers, Ni-Cd, Ni-Zn, Co-Cd, Co-Zn, were synthesized and characterized. The photoelectric properties of heterometallic polymers were discussed by SPS. The introduction of heterometallic ions will broaden the SPS of corresponded monometallic complexes. Display Omitted highlights: > Four new heterometallic coordination polymers were reported. > The surface photoelectric properties of heterometallic polymers were studied by SPS. > They all possess photoelectric conversion properties. > The SPS of heterometallic polymers are broadened than that of monometallic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structures and characterization of four coordination polymers based on 5-amino-2,4,6-triiodoisophthalic acid

One homochiral 1D coordination polymer [Cu(ATIBDC)(2,2'-bipy)].3H{sub 2}O.CH{sub 3}OH (1) and three achiral 1D coordination polymers: [Cd(ATIBDC)(2,2'-bipy)(H{sub 2}O)].3H{sub 2}O (2), [Cd(ATIBDC)(phen)(H{sub 2}O)].4H{sub 2}O (3), and [Mn(ATIBDC)(phen){sub 2}].5H{sub 2}O (4) have been synthesized and characterized (H{sub 2}ATIBDC=5-amino-2,4,6-triiodoisophthalic acid, 2,2'-bipy=2,2'-bipyridine, and phen=1,10-phenanthroline). Extended high dimensional network architectures are further constructed with the help of weak secondary interactions, such as hydrogen bonding, aromatic stacking, and halogen bonding (C-I..{pi} and C-I...N/O). Complex 1 crystallizes in the monoclinic system with chiral space group P2(1) and exhibits a right-handed 2{sub 1} helical chain structure. The homochirality of 1 was confirmed by CD spectrum. Interestingly, two new configurations of decameric water cluster are found in 3 and 4. The acyclic tetrameric cluster (H{sub 2}O){sub 3}(CH{sub 3}OH) in 1 and (H{sub 2}O){sub 4} in 2 array into highly ordered helical infinite chains. Thermal stabilities of all the complexes have been studied. Solid state fluorescent properties of the Cd(II) complexes have been explored. -- Graphical abstract: The synthesis, crystal structures and characterization of one 1D homochiral coordination polymer and three achiral 1D coordination polymers with 5-amino-2,4,6-triiodoisophthalic acid (H{sub 2}ATIBDC) are reported. Display Omitted highlights: > Four 1D coordination polymers with 5-amino-2,4,6-triiodoisophthalate are reported. > The halogen bonds play important roles in the supramolecular assembly. > Solid state fluorescent properties of the Cd(II) complexes are explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of TiN nanorods by electrospinning and their electrochemical properties

TiN nanorods were synthesized using electrospinning technique followed by thermolysis in different atmospheres. A dimethyl formamide-ethanol solution of poly-(vinyl pyrrolidone) and Ti (IV)-isopropoxide was used as the electrospinning precursor solution and as-spun nanofibers were calcined at 500 {sup o}C in air to generate TiO{sub 2} nanofibers. Subsequently, a conversion from TiO{sub 2} nanofibers to TiN nanorods was employed by the nitridation treatment at 600{approx}1400 {sup o}C in ammonia atmosphere. A typical characteristic of the final products was that the pristine nanofibers were cut into nanorods. The conversion from TiO{sub 2} to TiN was realized when the nitridation temperature was above 800 {sup o}C. As-prepared nanorods were composed of TiN nano-crystallites and the average crystallite size gradually increased with the increase of the nitridation temperature. Electrochemical properties of TiN nanorods showed strong dependence on the nitridation temperature. The maximum value of the specific capacitance was obtained from the TiN nanorods prepared at 800 {sup o}C. -- Graphical Abstract: TiN nanorods were prepared using electrospinning followed by thermolysis under different atmospheres. Electrochemical properties of the TiN nanorods showed strong dependence on the nitridation temperature. Display Omitted Highlights: {yields} TiN nanorods were synthesized by a combination of electrospinning and thermolysis. {yields} Electrochemical properties showed strong dependence on the nitridation temperature. {yields} The TiN nanorods prepared at 800 {sup o}C possessed the highest specific capacitance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surfactant-assisted hydrothermal crystallization of nanostructured lithium metasilicate (Li{sub 2}SiO{sub 3}) hollow spheres: (I) Synthesis, structural and microstructural characterization

Lithium metasilicate (Li{sub 2}SiO{sub 3}) was successfully synthesized using a hydrothermal process in the presence of different surfactants with cationic, non-ionic and anionic characters. The samples obtained were compared to a sample prepared by the conventional solid-state reaction method. The structural and microstructural characterizations of different Li{sub 2}SiO{sub 3} powders were performed using various techniques. Diffraction analyses revealed the successful crystallization of pure Li{sub 2}SiO{sub 3} single phase by hydrothermal technique, even without further heat-treatments and independent of the surfactant used. Electron microscopy analyses revealed that Li{sub 2}SiO{sub 3} powders were composed of uniform micrometric particles with a hollow sphere morphology and nanostructured walls. Finally, different thermal analyses showed that Li{sub 2}SiO{sub 3} samples preserved their structure and microstructure after further thermal treatments. Specific aspects regarding the formation mechanism of the spherical aggregates under hydrothermal conditions are discussed, and there is a special emphasis on the effect of the synthesis pathway on the morphological characteristics. -- Graphical abstract: Li{sub 2}SiO{sub 3} was synthesized using a hydrothermal process in the presence of different surfactants. Li{sub 2}SiO{sub 3} powders were composed of uniform micrometric particles with a hollow sphere morphology and nanostructured walls. Display Omitted Highlights: {yields} Pure Li{sub 2}SiO{sub 3} was synthesized by the hydrothermal method. {yields} Surfactant addition produced microstructural and morphological variations. {yields} TEM reveled the generation of nanostructured hollow spheres.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanochemical-thermal preparation and structural studies of mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions

A series of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions (0{<=}x{<=}1), prepared by mechanochemical processing of Bi{sub 2}O{sub 3}/Ga{sub 2}O{sub 3}/Al{sub 2}O{sub 3} mixtures and subsequent annealing, was investigated by XRD, EDX, and {sup 27}Al MAS NMR. The structure of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions is found to be orthorhombic, space group Pbam (No. 55). The lattice parameters of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} series increase linearly with increasing gallium content. Rietveld refinement of the XRD data as well as the analysis of the {sup 27}Al MAS NMR spectra show a preference of gallium cations for the tetrahedral sites in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9}. As a consequence, this leads to a far from random distribution of Al and Ga cations across the whole series of solid solutions. -- Graphical Abstract: Mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} mixed crystals (0{<=}x{<=}1) prepared by a combined mechanochemical-thermal route possess a non-random distribution of Ga{sup 3+} and Al{sup 3+} cations over the sites of tetrahedral (T) and octahedral [O] coordination, characterized by the preference of Ga{sup 3+} (Al{sup 3+}) for tetrahedral (octahedral) sites. Display Omitted Highlights: {yields} Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} (0{<=}x{<=}1) were synthesized via mechanochemical-thermal route. {yields} The lattice parameters of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} increase linearly with gallium content. {yields} Quantitative information on the cation distribution in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} is derived. {yields} Ga{sup 3+} and Al{sup 3+} show the preference for tetrahedral and octahedral sites, respectively.

36 MATERIALS SCIENCE↗

Functionalized mesoporous silica materials for molsidomine adsorption: Thermodynamic study

A series of unmodified and organically modified mesoporous silica materials was prepared. The unmodified mesoporous silica was synthesized via sol–gel synthesis in the presence of D-glucose as pore-forming agent. The functionalized by phenyl, aminopropyl and mercaptopropyl groups silica materials were prepared via grafting. The fabricated adsorbent materials were characterized by Fourier transform infrared spectroscopy (FTIR) analysis, N{sub 2} adsorption/desorption and elemental analysis methods. Then their adsorption properties for mesoionic dug molsidomine were investigated at 290–313 K and physiological pH value. Thermodynamic parameters of molsidomine adsorption on the synthesized materials have been calculated. The obtained results showed that the adsorption process of molsidomine on the phenyl modified silica is the most quantitatively and energetically favorable. The unmodified and mercaptopropyl modified silica materials exhibit significantly higher adsorption capacities and energies for molsidomine than the aminopropyl modified sample. The effects are discussed from the viewpoint of nature of specific interactions responsible for the adsorption. - Graphical abstract: Comparative analysis of the thermodynamic characteristics of molsidomine adsorption showed that the adsorption process on mesoporous silica materials is controlled by chemical nature of surface functional groups. Molsidomine adsorption on the phenyl modified silica is the most quantitatively and energetically favorable. Taking into account ambiguous nature of mesoionic compounds, it was found that molsidomine is rather aromatic than dipolar. Display Omitted - Highlights: • Unmodified and organically modified mesoporous silica materials were prepared. • Molsidomine adsorption on the silica materials was studied. • Phenyl modified silica shows the highest adsorption capacity and favorable energy. • Molsidomine exhibits the lowest affinity to aminopropyl modified silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new naturally-occurring nanoporous copper sheet–silicate with 6{sup 4}8{sup 2} cages related to synthetic “CuSH” phases

The structure of a new naturally-occurring nanoporous copper silicate of formula Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O (disodium calcium dicopper octasilicate monohydrate) is reported and its relations to synthetic nanoporous “CuSH” compounds are discussed. The new phase is monoclinic C2/m with unit cell parameters a=12.2439(6) Å, b=15.7514(4) Å, c=10.6008(3) Å, β=125.623(2)°, and V=1661.87(10) Å{sup 3} (Z=4). The structure has been refined to R{sub 1}(all)=0.033, wR{sub 2}(all)=0.071, and GoF=1.090. In the double-sheet of SiO{sub 4} tetrahedra, 6{sup 4}8{sup 2} cages connect to form a chequer-board motif within which Na atoms and H{sub 2}O groups occupy channels. Each cage is occupied by 7-coordinated Na atom lying in a mirror plane. An intra-sheet corridor between the 6{sup 4}8{sup 2} cages is occupied by Na in 8-fold cuboidal coordination. The silicate skeleton is highly porous, with obvious channels and pathways for ion migration. The interlayer between double-sheets is occupied by CaO{sub 8}, CuO{sub 5} and NaO{sub 5}(H{sub 2}O) polyhedra. CuO{sub 5} polyhedra occur as rows of edge-sharing Cu{sub 2}O{sub 9} pairs connected by NaO{sub 5}(H{sub 2}O) octahedra and CaO{sub 8} square antiprisms. Both CuO{sub 5} and NaO{sub 5}(H{sub 2}O) polyhedra are features shared with closely-related synthetic “CuSH” phases of interest to the solid-state chemistry community as potential nanoporous catalysts. However, Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O is the only natural representative of this group of structures, and the only one to contain essential Ca. The discovery of Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O points to a new group of CuSH-type phases containing alkaline-earth elements. Its close natural association and structural affinity with wesselsite SrCuSi{sub 4}O{sub 10} suggest the possibility of transformation between CuSH and gillespite-type phases, and thereby a route to synthesising alkaline-earth CuSH derivatives, so widening their potential as nanoporous catalysts. - Graphical abstract: Projection onto (010) of the structure of the natural nanoporous sheet silicate Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O showing the double sheet of corner-linked SiO{sub 4} tetrahedra, intralayer Na and interlayer Na, Ca Cu and H{sub 2}O. Small green sphere Cu, large blue spheres Ca, orange purple and yellow small spheres Na, large grey sphere H{sub 2}O molecules. Bonds from inter/intralayer species to sheets have been omitted for clarity. - Highlights: • A new naturally-occurring nanoporous Cu sheet–silicate containing 6{sup 4}8{sup 2} cages. • A bridge between synthetic nanoporous CuSH phases and gillespite-type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology control of open-framework zinc phosphate Zn{sub 4}(H{sub 3}O)(NH{sub 4}){sub 3}(PO{sub 4}){sub 4} via microwave-assisted technique

Open-framework zinc phosphates were synthesized by microwave-assisted technique, and it was shown that the morphology of as-prepared materials could be easily tailored by changing synthesis temperature, reaction time and pH value. During the synthesis, when the reaction temperature increases from 130 °C to 220 °C, the products transformed from hexagonal prisms to polyhedron along with the disappearance of the hexagonal prisms vertical plane. Simultaneously, both the reaction time and pH value could promote the nucleation and growth of crystal particles. More interestingly, the target products with different morphologies could be obtained by varying the usage of NaOH or NH{sub 3}·H{sub 2}O at 130 °C during the microwave synthesis process. - Graphical abstract: Zinc phosphates with variable morphologies can be obtained by simply tuning the microwave-heating temperatures. Display Omitted - Highlights: • Synthesis of open-framework Zn{sub 4} (H{sub 3}O) (NH{sub 4}){sub 3}(PO{sub 4}){sub 4} compounds employing microwave technique. • Dependence of morphology on the reaction conditions. • Morphology transformation from hexagonal prisms to polyhedron was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of polymorphs of photoluminescent Eu(III)-(2,5-furandicarboxylic acid, oxalic acid) MOFs

A novel metal organic framework (MOF) formulated as [Eu(H{sub 2}O){sub 2}(fdc)(ox){sub 0.5}·(H{sub 2}O)]{sub n} (1, fdc{sup 2−}=2,5-furandicarboxylate, ox{sup 2−}=oxalate), was hydrothermally synthesized via in situ ox{sup 2−} generation from the partial decomposition of the fdc{sup 2−} ligand. This material crystallizes in the monoclinic space group C2/c, unit cell parameters of 1: a=16.7570(10), b=10.5708(7), c=13.5348(14) Å, β=116.917(2)° (Z=8), and exhibits a three-dimensional (3D)-porous framework, with guest water molecules residing in the channel linking all other ligands (H{sub 2}O, ox{sup 2−}and fdc{sup 2−}) via hydrogen bonding interactions. Compound 2 is a polymorph of 1 crystallizing in monoclinic P21/c space group. The photoluminescence properties of 1 and 2 were studied at room temperature. The spectra show the typical Eu{sup 3+} red emission and the differences observed reflects the slightly different structures of these polymorphs. - Graphical abstract: Exploring metal organic framework polymorphism in the system Eu(H{sub 2}O){sub 2}(fdc)(ox){sub 0.5}·(H{sub 2}O)]{sub n} (fdc{sup 2−}=2,5-furandicarboxylate, ox{sup 2−}=oxalate) for tuning light emission. Display Omitted - Highlights: • Synthesis of Eu(III)-(2,5-furandicarboxylic acid, oxalic acid) MOF polymorphs. • Detailed single-crystal study of polymorphs including hydrogen-bonding networks. • Photoluminescence spectroscopy show subtle differences light emission properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, magnetism and transport properties of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}

Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} were obtained from a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. The initial phase, CeRu{sub 2}Al{sub 2}B, does not recrystallize, instead, crystals of a new phase, Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}, could be isolated once the flux was removed. The title compound crystallizes in the tetragonal space group P4/nmm (No. 129) with a=1139.02(8), c=801.68(6) pm (c/a=0.70) in the Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} structure type. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 µΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. - Graphical abstract: Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}A{sub l4.1}B{sub 10} were obtained using a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a Ni–In flux. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 μΩ cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. Display Omitted - Highlights: • Flux synthesis of high quality single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} is presented along with the crystal structure, magnetic and transport properties. • The compound is isostructural to Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} but is first of this structure type showing mixed occupancies of d-elements. • This is an intermetallic phase with Ce in either the 4+ or an intermediate valence state. • The fact that this structure with mixed occupied transition metal sites exists suggests that more compounds of this type should be accessible and the physical properties tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lifting the geometric frustration through a monoclinic distortion in “114” YBaFe{sub 4}O{sub 7.0}: Magnetism and transport

The possibility to lift the geometric frustration in the “114” stoichiomeric tetragonal oxide YBaFe{sub 4}O{sub 7.0} by decreasing the temperature has been investigated using neutron and synchrotron powder diffraction techniques. Besides the structural transition from tetragonal to monoclinic symmetry that appears at T{sub S}=180 K, a magnetic transition is observed below T{sub N}=95 K. The latter corresponds to a lifting of the 3D geometric frustration toward an antiferromagnetic long range ordering, never observed to date in a cubic based “114’” oxide. The magnetic structure, characterized by the propagation vector k{sub 1}=(0,0,½), shows that one iron Fe2 exhibits a larger magnetic moment than the three others, suggesting a possible charge ordering according to the formula YBaFe{sup 3+}Fe{sub 3}{sup 2+}O{sub 7.0}. The magnetic M(T) and χ′(T) curves, in agreement with neutron data, confirm the structural and magnetic transitions and evidence the coexistence of residual magnetic frustration. Moreover, the transport measurements show a resistive transition from a thermally activated conduction mechanism to a variable range hopping mechanism at T{sub S}=180 K, with a significant increase of the dependence of the resistivity vs. temperature. Mössbauer spectroscopy clearly evidences a change in the electronic configuration of the iron framework at the structural transition as well as coexistence of several oxidation states. The role of barium underbonding in these transitions is discussed. - Graphical abstract: Atomic displacements at the tetragonal-monoclinic transition in YBaFe{sub 4}O{sub 7}. Display Omitted - Highlights: • The structural and magnetic phase transitions of YBaFe{sub 4}O{sub 7} were studied below room temperature. • The tetragonal to monoclinic transition, characterized by NPD and SXRD, was studied using mode crystallography approach. • Monoclinic distortion allows the lifting of the geometrical frustration on the iron sublattice, leading to AF order at T=95 K.

36 MATERIALS SCIENCE↗