Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Network Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

The Solar Chromosphere/Corona Interface: FUV-EUV Observations and Modeling of Unresolved Coronal Funnels - I

A coronal funnel model, developed by Rabin (199l), was tested against a calibrated spectroheliogram recorded in 171 - 175 Angstrom bandpass. This image was recorded on board a sounding rocket experiment flown on 1994 November 3, called the Multi-Spectral Solar Telescope Array, II (MSSTA II), MSSTA, a joint project of Stanford University, the NASA Marshall Space Flight Center and the Lawrence Livermore National Laboratory, is an observing platform composed of a set of normal-incidence, multilayer-coated optics designed to obtain narrow bandpass, high resolution images (1 - 3 arc sec) at selected FUV, EUV and soft X-ray wavelengths (44 Angstroms - 1550 Angstroms). Using full-disk images centered at 1550 Angstroms (C IV) and 173 Angstroms (FE IX/X), the funnel model, which is based on coronal back-heating, was tested against the data incorporating observed constraints on global coverage and measured flux. Found, was a class of funnel models that could account for the quiescent, globally diffuse and unresolved emission seen in the 171 - 175 Angstrom bandpass, where the funnels are assumed to be rooted in the C IV supergranular network. These models, when incorporated with the Chianti spectral code, suggest that this emission is mostly of upper transition region origin and primarily composed of FE IX plasma. The funnels are found to have constrictions, Gamma approx. 6 - 20, which is in good agreement with the observations. Further, the fitted models simultaneously satisfy global areal constraints seen in both images; namely, that a global network of funnels must cover approx. 70 - 95 % of the total solar surface area seen in the 171 - 175 Angstrom image, and = 45 % of the disk area seen in the 1550 Angstrom bandpass. These findings support the configuration of the EUV magnetic network as suggested by Reeves et af. (1974) and put forth in more detail by Gabriel (1976). Furthermore, the models are in good agreement with differential emission measure estimates made of the transition region by Raymond & Doyle (1981) for temperatures, 250,000 K = T = 650,000 K, based on full-disk observations made on board by SkyLab.

Martinez-Galarce, D. S.↗
NASA NTRS1992

Neural networks in structural analysis and design - An overview

The present paper provides an overview of the state-of-the-art in the application of neural networks in problems of structural analysis and design, including a survey of published applications in structural engineering. Such applications have included, among others, the use of neural networks in modeling nonlinear analysis of structures, as a rapid reanalysis capability in optimal design, and in developing problem parameter sensitivity of optimal solutions for use in multilevel decomposition based design. While most of the applications reported in the literature have been restricted to the use of the multilayer perceptron architecture and minor variations thereof, other network architectures have also been successfully explored, including the ART network, the counterpropagation network and the Hopfield-Tank model.

Hajela, P.↗
NASA NTRS2000

Performance Evaluation of the NASA/KSC Transmission System

NASA-KSC currently uses three bridged 100-Mbps FDDI segments as its backbone for data traffic. The FDDI Transmission System (FTXS) connects the KSC industrial area, KSC launch complex 39 area, and the Cape Canaveral Air Force Station. The report presents a performance modeling study of the FTXS and the proposed ATM Transmission System (ATXS). The focus of the study is on performance of MPEG video transmission on these networks. Commercial modeling tools - the CACI Predictor and Comnet tools - were used. In addition, custom software tools were developed to characterize conversation pairs in Sniffer trace (capture) files to use as input to these tools. A baseline study of both non-launch and launch day data traffic on the FTXS is presented. MPEG-1 and MPEG-2 video traffic was characterized and the shaping of it evaluated. It is shown that the characteristics of a video stream has a direct effect on its performance in a network. It is also shown that shaping of video streams is necessary to prevent overflow losses and resulting poor video quality. The developed models can be used to predict when the existing FTXS will 'run out of room' and for optimizing the parameters of ATM links used for transmission of MPEG video. Future work with these models can provide useful input and validation to set-top box projects within the Advanced Networks Development group in NASA-KSC Development Engineering.

Christensen, Kenneth J.↗
NASA NTRS1994

Modeling and simulation of the data communication network at the ASRM Facility

This paper describes the modeling and simulation of the communication network for the NASA Advanced Solid Rocket Motor (ASRM) facility under construction at Yellow Creek near Luka, Mississippi. Manufacturing, testing, and operations at the ASRM site will be performed in different buildings scattered over an 1800 acre site. These buildings are interconnected through a local area network (LAN), which will contain one logical Fiber Distributed Data Interface (FDDI) ring acting as a backbone for the whole complex. The network contains approximately 700 multi-vendor workstations, 22 multi-vendor workcells, and 3 VAX clusters interconnected via Ethernet and FDDI. The different devices produce appreciably different traffic patterns, each pattern will be highly variable, and some patterns will be very bursty. Most traffic is between the VAX clusters and the other devices. Comdisco's Block Oriented Network Simulator (BONeS) has been used for network simulation. The two primary evaluation parameters used to judge the expected network performance are throughput and delay.

Nirgudkar, R. P.↗
NASA NTRS1992

Synchronization Of Parallel Discrete Event Simulations

Adaptive, parallel, discrete-event-simulation-synchronization algorithm, Breathing Time Buckets, developed in Synchronous Parallel Environment for Emulation and Discrete Event Simulation (SPEEDES) operating system. Algorithm allows parallel simulations to process events optimistically in fluctuating time cycles that naturally adapt while simulation in progress. Combines best of optimistic and conservative synchronization strategies while avoiding major disadvantages. Algorithm processes events optimistically in time cycles adapting while simulation in progress. Well suited for modeling communication networks, for large-scale war games, for simulated flights of aircraft, for simulations of computer equipment, for mathematical modeling, for interactive engineering simulations, and for depictions of flows of information.

Steinman, Jeffrey S.↗
NASA NTRS2006

Simulation of Lunar Surface Communications Network Exploration Scenarios

Simulations and modeling of surface-based communications networks provides a rapid and cost effective means of requirement analysis, protocol assessments, and tradeoff studies. Robust testing in especially important for exploration systems, where the cost of deployment is high and systems cannot be easily replaced or repaired. However, simulation of the envisioned exploration networks cannot be achieved using commercial off the shelf network simulation software. Models for the nonstandard, non-COTS protocols used aboard space systems are not readily available. This paper will address the simulation of realistic scenarios representative of the activities which will take place on the surface of the Moon, including selection of candidate network architectures, and the development of an integrated simulation tool using OPNET modeler capable of faithfully modeling those communications scenarios in the variable delay, dynamic surface environments. Scenarios for exploration missions, OPNET development, limitations, and simulations results will be provided and discussed.

Linsky, Thomas W.↗
NASA NTRS2019

A Communication Channel Density Estimating Generative Adversarial Network

Autoencoder-based communication systems use neural network channel models to backwardly propagate message reconstruction error gradients across an approximation of the physical communication channel. In this work, we develop and test a new generative adversarial network (GAN) architecture for the purpose of training a stochastic channel approximating neural network. In previous research, investigators have focused on additive white Gaussian noise (AWGN) channels and/or simplified Rayleigh fading channels, both of which are linear and have well defined analytic solutions. Given that training a neural network is computationally expensive, channel approximation networks— and more generally the autoencoder systems—should be evaluated in communication environments that are traditionally difficult. To that end, our investigation focuses on channels that contain a combination of non-linear amplifier distortion, pulse shape filtering, intersymbol interference, frequency-dependent group delay, multipath, and non-Gaussian statistics. Each of our models are trained without any prior knowledge of the channel. We show that the trained models have learned to generalize over an arbitrary amplifier drive level and constellation alphabet. We demonstrate the versatility of our GAN architecture by comparing the marginal probability density function of several channel simulations with that of their corresponding neural network approximations

Smith, Aaron↗
NASA NTRS2000

Protocol Architecture Model Report

NASA's Glenn Research Center (GRC) defines and develops advanced technology for high priority national needs in communications technologies for application to aeronautics and space. GRC tasked Computer Networks and Software Inc. (CNS) to examine protocols and architectures for an In-Space Internet Node. CNS has developed a methodology for network reference models to support NASA's four mission areas: Earth Science, Space Science, Human Exploration and Development of Space (REDS), Aerospace Technology. This report applies the methodology to three space Internet-based communications scenarios for future missions. CNS has conceptualized, designed, and developed space Internet-based communications protocols and architectures for each of the independent scenarios. The scenarios are: Scenario 1: Unicast communications between a Low-Earth-Orbit (LEO) spacecraft inspace Internet node and a ground terminal Internet node via a Tracking and Data Rela Satellite (TDRS) transfer; Scenario 2: Unicast communications between a Low-Earth-Orbit (LEO) International Space Station and a ground terminal Internet node via a TDRS transfer; Scenario 3: Multicast Communications (or "Multicasting"), 1 Spacecraft to N Ground Receivers, N Ground Transmitters to 1 Ground Receiver via a Spacecraft.

Dhas, Chris↗
NASA NTRS2012

Reduced-Order Modeling for Flutter/LCO Using Recurrent Artificial Neural Network

The present study demonstrates the efficacy of a recurrent artificial neural network to provide a high fidelity time-dependent nonlinear reduced-order model (ROM) for flutter/limit-cycle oscillation (LCO) modeling. An artificial neural network is a relatively straightforward nonlinear method for modeling an input-output relationship from a set of known data, for which we use the radial basis function (RBF) with its parameters determined through a training process. The resulting RBF neural network, however, is only static and is not yet adequate for an application to problems of dynamic nature. The recurrent neural network method [1] is applied to construct a reduced order model resulting from a series of high-fidelity time-dependent data of aero-elastic simulations. Once the RBF neural network ROM is constructed properly, an accurate approximate solution can be obtained at a fraction of the cost of a full-order computation. The method derived during the study has been validated for predicting nonlinear aerodynamic forces in transonic flow and is capable of accurate flutter/LCO simulations. The obtained results indicate that the present recurrent RBF neural network is accurate and efficient for nonlinear aero-elastic system analysis

Yao, Weigang↗
NASA NTRS2022

Multi-Variate LSTM Prediction of Alaska Magnetometer Chain Utilizing a Coupled Model Approach

During periods of rapidly changing geomagnetic conditions electric fields form within the Earth’s surface and induce currents known as geomagnetically induced currents(GICs), which interact with unprotected electrical systems our society relies on. In this study, we train multi-variate Long-Short Term Memory neural networks to predict magnitude of north-south component of the geomagnetic field (|BN|) at multiple ground magnetometer stations across Alaska provided by the SuperMAG database with a future goal of predicting geomagnetic field disturbances. Each neural network is driven by solar wind and interplanetary magnetic field inputs from the NASA OMNI database spanning from 2000–2015 and is fine tuned for each station to maximize the effectiveness in predicting |BN|. The neural networks are then compared against multivariate linear regression models driven with the same inputs at each station using Heidke skill scores with thresholds at the 50, 75, 85, and 99 percentiles for |BN|. The neural network models show significant increases over the linear regression models for |BN| thresholds. We also calculate the Heidke skill scores for d|BN|/dt by deriving d|BN|/dt from |BN| predictions. However, neural network models do not show clear outperformance compared to the linear regression models. To retain the sign information and thus predict BN instead of |BN|, a secondary so-called polarity model is utilized. The polarity model is run in tandem with the neural networks predicting geomagnetic field in a coupled model approach and results in a high correlation between predicted and observed values for all stations. We find this model a promising starting point for a machine learned geomagnetic field model to be expanded upon through increased output time history and fast turnaround times.

Matthew Blandin↗
NASA NTRS1984

PAN AIR modeling studies. II - Sideslip option, network gaps, three-dimensional forebody flow, and thick-trailing-edge representation

PAN AIR is a computer program that calculates linear potential flow about arbitrary configurations at both subsonic and supersonic Mach numbers. This paper is a follow-on of another paper entitled 'PAN AIR Modeling Studies', in which several studies were presented that exhibited PAN AIR's versatility for modeling diverse configurations. Results from four modeling studies of interest in modeling realistic aircraft shapes are presented. The topics addressed are (1) half-geometry option in sideslip, (2) network gaps, (3) three-dimensional forebody flows, and (4) trailing-edge representation.

Strande, S.↗
NASA NTRS1998

The Error Distribution of BATSE GRB Location

We develop empirical probability models for BATSE GRB location errors by a Bayesian analysis of the separations between BATSE GRB locations and locations obtained with the InterPlanetary Network (IPN). Models are compared and their parameters estimated using 394 GRBs with single IPN annuli and 20 GRBs with intersecting IPN annuli. Most of the analysis is for the 4B (rev) BATSE catalog; earlier catalogs are also analyzed. The simplest model that provides a good representation of the error distribution has 78% of the locations in a 'core' term with a systematic error of 1.85 degrees and the remainder in an extended tail with a systematic error of 5.36 degrees, implying a 68% confidence region for bursts with negligible statistical errors of 2.3 degrees. There is some evidence for a more complicated model in which the error distribution depends on the BATSE datatype that was used to obtain the location. Bright bursts are typically located using the CONT datatype, and according to the more complicated model, the 68% confidence region for CONT-located bursts with negligible statistical errors is 2.0 degrees.

Briggs, Michael S.↗
NASA NTRS2020

A Multiscale Cohesive Law for Carbon Fiber Networks

Better predictive models of mechanical failure in low-weight heat shield composites would aid material certification for missions with aggressive atmospheric entry conditions. Here, we develop such a model for the rapid engineering analysis of the failure limits of phenolic impregnated carbon ablator (PICA) - a leading heat shield material whose structural component is a carbon fiber network. We hypothesize inelastic deformation failure mechanisms and model their behavior using molecular dynamics simulations to calculate the binding energy. We then upscale this binding energy to the macroscale using a renormalization argument. The approach delivers insightful and reasonably accurate macroscale predictions that compare favorably to experiments. In application, the model is validated for a particular variety of PICA by comparison to experiment and would then be used to study design scenarios in different entry conditions.

W. SCHILL↗
NASA NTRSDate not supplied

Interpretable Convolutional Learning Classifier System (C-LCS) for Higher Dimensional Datasets

The purpose of this paper is to devise an interpretable hybrid classification model for Convolutional Neural Networks (CNN) and a Learning Classifier System (LCS). The presented hybrid system integrates the fundamental attributes from both types of these classifiers. In the proposed hybrid model CNN works as an automatic feature extractor, and LCS works to provide interpretable rule-based classification results. Although LCS has limitations working on higher dimensional datasets, we resolve this limitation by using CNN as a feature extractor. The other concept of the non-interpretability of CNN is addressed by using the LCS rule. Furthermore, our experiment with higher dimensional datasets like CIFAR-10 and Fashion-MNIST shows that extended LCS provides comparable performance to the standard neural network model while also providing interpretable results. We named this extended LCS method Convolutional Learning Classifier Cystem (C-LCS).

Jelani Owens↗
NASA NTRS1985

Calculation of geopotential and temperature fields from an array of nearly continuous wind observations

The accuracy is studied of temperature estimates derived from the divergence equation when wind observations of various spatial and temporal resolutions and accuracies are available. The basic data set used is the high resolution model data set used by Kuo and Anthes (1984a) in observing systems simulation experiments (OSSE) designed to estimate the errors in heat and moisture budgets (Kuo and Anthes, 1984b) calculated from the AVE-SESAME-1979 spatial observational network. This model data set is modified in ways to simulate wind observations that appear feasible from an operational regional network of wind profilers.

Kuo, Ying-Hwa↗
NASA NTRS1992

Space-Time Neural Networks

Concept of space-time neural network affords distributed temporal memory enabling such network to model complicated dynamical systems mathematically and to recognize temporally varying spatial patterns. Digital filters replace synaptic-connection weights of conventional back-error-propagation neural network.

Villarreal, James A.↗
NASA NTRS1988

Neural networks with hierarchically correlated patterns

The Hopfield model of neural networks is extended to allow for the storage and retrieval of hierarchically correlated patterns. The overlaps between these patterns form an ultrametric tree. Intermediate states, which serve as ancestors for the following levels, are generated at each level of the tree. The states belonging to each level are stored, by a modified learning rule, in a series of identical networks, one for each level. The retrieval of a particular pattern is preceded and assisted by the successive retrieval of its ancestors. The performance of this scheme is studied analytically and numerically.

Gutfreund, H.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-32188-DND

Engineers rely on a wide variety of modern thermal tools to model thermal problems; many of these tools offer graphical “front ends” whereby users formulate their analytical models using a CAD interface. Behind the scenes, the analysis is performed on a thermal network – this is true whether the analyst uses finite differencing or finite element methodologies. While graphical front ends are very powerful, understanding the resulting thermal network representation used for a model gives the user the ability to check or even modify the models at a basic level. Additionally, there are instances where an engineer may prefer to develop network models from scratch or use heritage code that does not have a graphical front end. Some front-end programs output thermal networks in the widely used SINDA format; our lesson will focus on this input format.

Steven L Rickman↗