Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Navigation Errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Fault detection and isolation

Erroneous measurements in multisensor navigation systems must be detected and isolated. A recursive estimator can find fast growing errors; a least squares batch estimator can find slow growing errors. This process is called fault detection. A protection radius can be calculated as a function of time for a given location. This protection radius can be used to guarantee the integrity of the navigation data. Fault isolation can be accomplished using either a snapshot method or by examining the history of the fault detection statistics.

Bernath, Greg↗
NASA NTRS1990

Preliminary error budget for an optical ranging system: Range, range rate, and differenced range observables

Future missions to the outer solar system or human exploration of Mars may use telemetry systems based on optical rather than radio transmitters. Pulsed laser transmission can be used to deliver telemetry rates of about 100 kbits/sec with an efficiency of several bits for each detected photon. Navigational observables that can be derived from timing pulsed laser signals are discussed. Error budgets are presented based on nominal ground stations and spacecraft-transceiver designs. Assuming a pulsed optical uplink signal, two-way range accuracy may approach the few centimeter level imposed by the troposphere uncertainty. Angular information can be achieved from differenced one-way range using two ground stations with the accuracy limited by the length of the available baseline and by clock synchronization and troposphere errors. A method of synchronizing the ground station clocks using optical ranging measurements is presented. This could allow differenced range accuracy to reach the few centimeter troposphere limit.

Folkner, W. M.↗
NASA NTRS1972

Software control for large scale on-board checkout: A concept

Two level system checkout in which first level satisfies continuous monitoring requirements and second level provides fault isolation to satisfy maintenance requirements, provides self-checking capability for monitoring system and enables recovery from unexpected error or failure interruptions. System must perform operational duties of navigation, control, and experimentation.

Grounds, H. K.↗
NASA NTRS1973

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. Significant results from ERTS-1 imagery are: (1) Several new lineaments or faults have been identified. (2) Study of navigational maps and the ERTS-1 imagery suggests significant mapping errors in the geodetic position of Baja California.

Abdel-Gawad, M.↗
NASA NTRS1973

Low-thrust solar electric propulsion navigation simulation program

An interplanetary low-thrust, solar electric propulsion mission simulation program suitable for navigation studies is presented. The mathematical models for trajectory simulation, error compensation, and tracking motion are described. The languages, input-output procedures, and subroutines are included.

Hagar, H. J.↗
NASA NTRS1975

Vehicle systems and payload requirements evaluation

Techniques developed for identifying launch vehicle system requirements for NASA automated space missions are discussed. Emphasis is placed on development of computer programs and investigation of astrionics for OSS missions and Scout. The Earth Orbit Mission Program - 1 which performs linear error analysis of launch vehicle dispersions for both vehicle and navigation system factors is described along with the Interactive Graphic Orbit Selection program which allows the user to select orbits which satisfy mission requirements and to evaluate the necessary injection accuracy.

Rea, F. G.↗
NASA NTRS2007

Learning and Prediction of Slip from Visual Information

This paper presents an approach for slip prediction from a distance for wheeled ground robots using visual information as input. Large amounts of slippage which can occur on certain surfaces, such as sandy slopes, will negatively affect rover mobility. Therefore, obtaining information about slip before entering such terrain can be very useful for better planning and avoiding these areas. To address this problem, terrain appearance and geometry information about map cells are correlated to the slip measured by the rover while traversing each cell. This relationship is learned from previous experience, so slip can be predicted remotely from visual information only. The proposed method consists of terrain type recognition and nonlinear regression modeling. The method has been implemented and tested offline on several off-road terrains including: soil, sand, gravel, and woodchips. The final slip prediction error is about 20%. The system is intended for improved navigation on steep slopes and rough terrain for Mars rovers.

rover↗
NASA NTRS2010

Advanced Navigation Strategies For Asteroid Sample Return Missions

Flyby and rendezvous missions to asteroids have been accomplished using navigation techniques derived from experience gained in planetary exploration. This paper presents analysis of advanced navigation techniques required to meet unique challenges for precision navigation to acquire a sample from an asteroid and return it to Earth. These techniques rely on tracking data types such as spacecraft-based laser ranging and optical landmark tracking in addition to the traditional Earth-based Deep Space Network radio metric tracking. A systematic study of navigation strategy, including the navigation event timeline and reduction in spacecraft-asteroid relative errors, has been performed using simulation and covariance analysis on a representative mission.

Getzandanner, K.↗
NASA NTRS2021

Maneuver Design Implementation and Verification for the Mars 2020 Mission

On February 18, 2021, the Perseverance rover landed in Jezero Crater on Mars, transported by the Mars 2020 spacecraft on a nearly seven-month journey to the Red Planet. The execution of three propulsive maneuvers during the interplanetary cruise phase was required to remove the launch-injection bias and deliver the spacecraft to the Mars atmospheric entry point. This paper focuses on the maneuver implementation and verification process between the navigation and spacecraft teams. Additionally, this paper discusses the execution error models that were used to determine maneuver performance and delivery accuracy at the atmospheric entry interface point.

Kruizinga, Gerhard↗
DOE OSTI2025

From Obsolete to Optimal (ATR Demineralized Water System)

My project was migrating a Human-Machine Interface (HMI) and Programmable Logic Controller (PLC) program from legacy software to a modern platform, enhancing operational efficiency and eliminating unsupported, obsolete equipment. Initially, I used a migration tool to transfer the programs to the new software, then manually updated variables to align with the new PLC. I optimized the PLC code by leveraging new scaling features in the I/O cards, removing over 45 obsolete rungs, and enhancing clarity with functional tag aliases. Next, I modernized the HMI's visuals with an updated color scheme and 3D buttons. I developed multiple interface versions iteratively refining them based on operator feedback. I also designed and created a dedicated "Rounds" screen incorporating insights from a previous intern’s project to streamline daily rounds. To improve clarity, consistency, and efficiency I redesigned the entire interface. Adding visual indicators to enhance operational awareness: red is used for values outside normal specifications, green for normal operating modes, yellow for manual mode, and grey for offline units. Additionally, I added a dynamic visual representation of tank levels, creating PLC logic to show the level in inches as well as inches and feet. I then incorporated a navigation sidebar to facilitate efficient screen transitions. Risk of human error was mitigated by defining narrow input ranges for tank level shutoff and password protecting setpoint changes. I also fixed issues with datatypes that caused inaccuracies in the original code. Overall, this comprehensive upgrade significantly enhanced the HMI's functionality, user experience, and operational reliability.

47 - OTHER INSTRUMENTATION↗
NASA NTRS2000

Stardust Navigation Covariance Analysis

The Stardust spacecraft was launched on February 7, 1999 aboard a Boeing Delta-II rocket. Mission participants include the National Aeronautics and Space Administration (NASA), the Jet Propulsion Laboratory (JPL), Lockheed Martin Astronautics (LMA) and the University of Washington. The primary objective of the mission is to collect in-situ samples of the coma of comet Wild-2 and return those samples to the Earth for analysis. Mission design and operational navigation for Stardust is performed by the Jet Propulsion Laboratory (JPL). This paper will describe the extensive JPL effort in support of the Stardust pre-launch analysis of the orbit determination component of the mission covariance study. A description of the mission and it's trajectory will be provided first, followed by a discussion of the covariance procedure and models. Predicted accuracy's will be examined as they relate to navigation delivery requirements for specific critical events during the mission. Stardust was launched into a heliocentric trajectory in early 1999. It will perform an Earth Gravity Assist (EGA) on January 15, 2001 to acquire an orbit for the eventual rendezvous with comet Wild-2. The spacecraft will fly through the coma (atmosphere) on the dayside of Wild-2 on January 2, 2004. At that time samples will be obtained using an aerogel collector. After the comet encounter Stardust will return to Earth when the Sample Return Capsule (SRC) will separate and land at the Utah Test Site (UTTR) on January 15, 2006. The spacecraft will however be deflected off into a heliocentric orbit. The mission is divided into three phases for the covariance analysis. They are 1) Launch to EGA, 2) EGA to Wild-2 encounter and 3) Wild-2 encounter to Earth reentry. Orbit determination assumptions for each phase are provided. These include estimated and consider parameters and their associated a-priori uncertainties. Major perturbations to the trajectory include 19 deterministic and statistical maneuvers planned for the mission. The spacecraft is three axis stabilized and has unbalanced thrusters for attitude control. Accelerations due to the attitude control system are treated stochastically. The tracking scenario for the study is patterned after the actual schedule employed during the different phases of the mission. Conventional X-band two-way Doppler and SRA range data was simulated and the standard accuracy for these data types was assumed throughout most of the mission. However, a deweighting scheme was used for the Doppler data during times of low Sun-Earth-Probe angles, especially in the case of the DSM. Optical data is assumed to be available starting at 50 days prior to the comet encounter. The optical data will be used to improve the ephemeris of Wild-2, which is considered crucial to properly target the comet flyby. Results of the covariance analysis are presented for all mission phases. Navigation capability will be discussed in terms of the uncertainty in the encounter B-Plane (B.R and B.T) and linearized time of flight. Delivery errors based on the final maneuver prior to the comet encounter will be presented. The most stringent navigation requirement is for the Earth reentry. The uncertainty in the flight path angle must be less than 0.02 degree (orbit determination and maneuver performance) to assure successful recovery of the SRC. Results presented show that this requirement can be met.

Menon, Premkumar R.↗
NASA NTRS2003

Navigation for the Mars PREMIER netlander delivery

This paper presents covariance and propulsive maneuver analyses performed to determine the impact on navigation performance of parameters such as: the addition of deltaDOR measurements, tracking data schedule, and maneuver execution errors.

approach↗
NASA NTRS1980

Space shuttle navigation analysis. Volume 2: Baseline system navigation

Studies related to the baseline navigation system for the orbiter are presented. The baseline navigation system studies include a covariance analysis of the Inertial Measurement Unit calibration and alignment procedures, postflight IMU error recovery for the approach and landing phases, on-orbit calibration of IMU instrument biases, and a covariance analysis of entry and prelaunch navigation system performance.

Jones, H. L.↗
NASA NTRS1980

Navigation accuracy analysis for the Halley flyby phase of a dual comet mission using ion drive

A dual comet (Halley Flyby/Tempel 2 Rendezvous) mission, making use of the solar electric propulsion system, is under consideration for a 1985 launch. This paper presents navigation accuracy analysis results for the Halley flyby phase of this mission. Orbit determination and guidance accuracies are presented for the baseline navigation strategy, along with the results of a number of sensitivity studies involving parameters such as data frequencies, data accuracies, ion drive thrust vector errors, comet ephemeris uncertainties, time lags associated with data processing and command sequence generation, probe release time, and navigation coast arc duration.

Wood, L. J.↗
NASA NTRSDate not supplied

Streamlining GNC Architecture Development and FSW Integration forthe Mars Ascent Vehicle

The Mars Ascent Vehicle (MAV) will be the first vehicle to perform an ascent from the surface ofanother atmospheric planetary body outside of the Earth-Moon system. Significant light-time delayrequires complete autonomy of flight throughout ascent, and naturally a high level of reliability isdesired in both MAV’s hardware and software subsystems. The MAV Guidance, Navigation and Controls(GNC) team and the MAV Flight Software (FSW) team have partnered together to improve the efficiencyof algorithm integration onto the MAV flight processor, and to increase confidence that said integrationis successful and without human error. An interface architecture is proposed for the GNC suite thatallows both the guidance and navigation subsystems to provide code algorithms directly in C++, and thecontrols subsystem to provide MATLAB Simulink auto-coded algorithms. Several continuous integration/deployment (CI/CD) methodologies have been considered for ease of transition of algorithm code fromthe GNC team to the FSW team. The GNC/FSW teams also worked together to develop a cFS-friendlywrapper which abstracts the integration of the GNC algorithm code into an interface-level API that iscompatible with cFS. Several iterations of vehicle GNC code have been produced between the GNC/FSWteam’s partnership, and this strong interface between these two teams have allowed the GNC/FSWteams to greatly increase confidence of efficient and error-free implementation of the GNC code ontoMAV for a successful flight.

GNC↗
NASA NTRS1975

Imaging on ballistic missions to comet Encke

Imaging for navigation and science has been studied for a 1980 Encke flyby at 0.4 to 0.8 AU from the sun with spinning and three-axis spacecraft. Trajectory errors, maneuvers, encounter geometry, imaging performance, and data transmission were considered. Onboard comet sightings are needed for navigation. Recommended for a three-axis spacecraft are two vidicon cameras and a nucleus sensor for closed-loop pointing control. The cameras are essentially the Mariner 9 and Mariner 10 instruments; the nucleus sensor is an updated version of a sensor flown on Mariners 6 and 7. For a spinning spacecraft, a framing camera using a charge-coupled device and a spin-scan photometer are proposed. The framing camera would be a new design; it would not be despun, but the spin axis should point along the comet-centered velocity vector. The photometer is essentially that flown on Pioneer 10 and 11.-

Jaffe, L. D.↗
NASA NTRS1981

GPS aiding of ocean current determination

The navigational accuracy of an oceangoing vessel using conventional GPS p-code data is examined. The GPS signal is transmitted over two carrier frequencies in the L-band at 1575.42 and 1227.6 MHz. Achievable navigational uncertainties of differenced positional estimates are presented as a function of the parameters of the problem, with particular attention given to the effect of sea-state, user equivalent range error, uncompensated antenna motion, varying delay intervals, and reduced data rate examined in the unaided mode. The unmodeled errors resulting from satellite ephemeris uncertainties are shown to be negligible for the GPS-NDS (Navigation Development) satellites. Requirements are met in relatively calm seas, but accuracy degradation by a factor of at least 2 must be anticipated in heavier sea states. The aided mode of operation is examined, and it is shown that requirements can be met by using an inertial measurement unit (IMU) to aid the GPS receiver operation. Since the use of an IMU would mean higher costs, direct Doppler from the GPS satellites is presented as a viable alternative.

Mohan, S. N.↗