Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

LiNbO{sub 3} films: Potential application, synthesis techniques, structure, properties

The main directions of application and synthesis of lithium niobate (LiNbO{sub 3}) and the advantages and drawbacks of the synthesis techniques are considered. The results of structural and morphological characteristics appropriate for use in the creation of devices are shown. The tasks for successful implementation of LiNbO{sub 3} films into novel devices are formulated.

36 MATERIALS SCIENCE↗

Structure and Properties of Boron-Doped LiNbO{sub 3} Single Crystals

We have studied the macro-and microstructure and properties of LiNbO{sub 3}〈B〉 crystals in comparison with LiNbO{sub 3}〈Zn〉 and stoichiometric and congruent lithium niobate crystals. The optical characteristics of the LiNbO{sub 3}〈B〉 crystals have been shown to approach those of the stoichiometric LiNbO{sub 3} and LiNbO{sub 3}〈Zn〉 crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamic Properties of FeNb{sub 2}O{sub 6} and FeTa{sub 2}O{sub 6}

Empirical calculational approaches have been used to evaluate the enthalpy, entropy, heat capacity, and melting point of iron(II) niobate and iron(II) tantalate and the coefficients A, B, and C in an equation for the temperature dependence of their heat capacity. The melting point of FeTa{sub 2}O{sub 6} has been experimentally determined to be 1891 ± 5 K. The calculated heat capacity (C°{sub p} (298.15 K)) of iron tantalate and the Gibbs energies of formation of FeN{sub 2}O{sub 6} and FeTa{sub 2}O{sub 6} have been compared to previously reported data.

36 MATERIALS SCIENCE↗

Dynamic Holography Method for Nondestructive Testing of Optical Homogeneity of Transparent Media

The potential of the dynamic holography method for testing the phase optical homogeneity of media transparent in visible light has been considered. This method is based on imaging samples in the scheme of two-wave mixing of the second-harmonic radiation of a Nd:YAG laser and image amplification in a photorefractive barium-strontium niobate crystal. Examples of identifying phase inhomogeneities at a level of 10{sup -5} cm{sup -1} and less in crystals of different compositions are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequence of phase transitions in PbHfO{sub 3}

The temperature changes in the PbHfO{sub 3} structure in the temperature range of 20 < t < 400 Degree-Sign C have been studied by X-ray powder diffraction. The sequence of phase changes with an increase in temperature was found to be as follows: orthorhombic phase Pbam (O1), orthorhombic phase C2mm (O2), tetragonal phase P4mm (T), and cubic phase Pm3m (C). The C2mm and P4mm phases are ferroelectric, which is confirmed by measuring the dependences {epsilon}(t). The similarity of the transition pattern obtained with the known transition sequences for ferroelectric (barium titanate, potassium niobate, and lead titanate) and antiferroelectric (lead zirconate) oxides is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Eu impurity on the dielectric properties of Sr{sub x}Ba{sub 1−x}Nb{sub 2}O{sub 6} crystals

The dielectric characteristics of barium-strontium niobate crystals with Eu impurities of 2000, 4000, 8000, and 16 000 ppm are presented. The dielectric hysteresis loops observed during heating and exposure to an electric field at room temperature are compared. It is shown that the evolution of the loops in time occurs as a result of sample heating under an ac electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the nature of electrical conductivity in nominally undoped LiNbO{sub 3} crystals

The temperature dependence of electrical conductivity and admittance of two nominally undoped lithium niobate crystals of congruent composition has been investigated in the temperature range of 293–450 K and simulated in the range of 350–700 K. It is shown that the ion conductivity at T < 450 K is mainly determined by OH{sup −} groups; however, some other mechanisms may manifest themselves at higher temperatures; a likely one is diffusion of oxygen vacancies, which leads to an increase in the “averaged” conductivity activation energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of LiNbO{sub 3}:Er Crystals and concentration dependences of their properties

A series of lithium niobate (LiNbO{sub 3}) crystals of congruent and stoichiometric compositions, doped with erbium, have been grown under non-steady-state thermal conditions. A series of LiNbO{sub 3}:Zn crystals, nominally pure LiNbO{sub 3} crystals of congruent and stoichiometric compositions, and a LiNbO{sub 3}:B crystal have also been grown. Both growth conditions and concentration dependences of physicochemical, ferroelectric, and structural characteristics of LiNbO{sub 3}:Er crystals are investigated. The growth regular domain microstructures and periodic nanostructures in LiNbO{sub 3}:Er crystals are analyzed by optical microscopy and atomic force microscopy (AFM). A comparative study of the optical homogeneity and photorefractive properties of LiNbO{sub 3}:Er crystals of congruent and stoichiometric compositions and the Raman spectra of LiNbO{sub 3} crystals of different compositions is performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Oxygen Diffusion in Reduced LiNbO{sub 3} Crystals

Using the method of impedance spectroscopy and optical density measurements, the diffusion of oxygen in single crystals of lithium niobate of the congruent composition after the reductive thermochemical processing is studied. The parameters describing the diffusion of oxygen in the temperature range 493–693 K are established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Piezoelectric Resonance in Stoichiometric LiNbO{sub 3} Crystals at High Temperatures and Conductivities

The piezoelectric characteristics, dielectric properties, and ionic conductivity of close-to-stoichiometry LiNbO{sub 3{sub s{sub t{sub o{sub i{sub c{sub h}}}}}}} crystals have been investigated in a wide temperature range (300–850 K) with the aim of establishing the conditions of use of lithium-niobate-based piezoelectric resonators at high temperatures and, accordingly, high conductivities. It is shown that the piezoelectric phenomenon in LiNbO{sub 3{sub s{sub t{sub o{sub i{sub c{sub h}}}}}}} crystals is observed in a certain temperature range ΔT (and, correspondingly, at certain static-conductivity relaxation times Δτ{sub V}) and a frequency range Δω{sub R} at the condition τ{sub V}{sup −1}≪ ω{sub R} satisfied. Apparently, not only LiNbO{sub 3{sub s{sub t{sub o{sub i{sub c{sub h}}}}}}} crystals exhibit such regularities, but also some other piezoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Polarization Relaxation of Ba{sub 0.5}Sr{sub 0.5}Nb{sub 2}O{sub 6}/(001)Si Films

The structure and dielectric characteristics of strontium barium niobate thin films deposited on single-crystalline silicon substrates without buffer layers are studied. It is found that the c axis in these heterostructures runs largely normally to the substrate surface and the a and b axes are randomly oriented in the plane of the substrate. The polarization relaxation in such heterostructures is investigated. It is shown that the film–substrate interface in the heterostructures grown by rf cathode sputtering may contain a low amount of long-lived charged defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring small absorptions by exploiting photothermal self-phase modulation

We present a method for the measurement of small optical absorption coefficients. The method exploits the deformation of cavity Airy peaks that occur if the cavity contains an absorbing material with a nonzero thermorefractive coefficient dn/dT or a nonzero expansion coefficient ath. Light absorption leads to a local temperature change and to an intensity-dependent phase shift, i.e., to a photothermal self-phase modulation. The absorption coefficient is derived from a comparison of time-resolved measurements with a numerical time-domain simulation applying a Markov-chain Monte Carlo algorithm. We apply our method to the absorption coefficient of lithium niobate doped with 7mol.% magnesium oxide and derive a value of {alpha}LN=(5.9{+-}0.9)x10{sup -4}/cm. Our method should also apply to materials with much lower absorption coefficients. Based on our modeling, we estimate that, with cavity finesse values of the order of 10{sup 4}, absorption coefficients of as low as 10{sup -8}/cm can be measured.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical stress sensor based on electro-optic compensation for photoelastic birefringence in a single crystal

An optical stress sensor is proposed by using a single crystal with both electro-optic and photoelastic effects. Different from previous crystal-based stress sensors, the proposed sensor is based on electro-optic compensation for stress-induced birefringence and does not need an additional quarter-wave plate or modulator, because the stress-sensing element is simultaneously used as an electro-optic compensator. Candidate sensing materials include electro-optic crystals of the 3 m symmetry group and all glass with large Kerr coefficients. A primary experiment has demonstrated that the stress-induced birefringence in lithium niobate crystal can be compensated by its electro-optic birefringence. The proposed stress sensor is compact and low cost, and it is possible to achieve closed-loop stress measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New materials for high-energy-resolution x-ray optics

The use of crystals other than silicon for x-ray optics is becoming more common for many challenging experiments such as resonant inelastic x-ray scattering and nuclear resonant scattering. As more—and more specialized—spectrometers become available at many synchrotron radiation facilities, interest in pushing the limits of experimental energy resolution has increased. The potentially large improvements in resolution and efficiency that nonsilicon optics offer are beginning to be realized. Furthermore, this article covers the background and state of the art for nonsilicon crystal optics with a focus on a resolution of 10 meV or better, concentrating on compounds that form trigonal crystals, including sapphire, quartz, and lithium niobate, rather than the more conventional cubic materials, including silicon, diamond, and germanium.

36 MATERIALS SCIENCE↗

Amplitude Modulator Chassis

The Amplitude Modulator Chassis (AMC) is the final component in the MOR system and connects directly to the PAM input through a 100-meter fiber. The 48 AMCs temporally shape the 48 outputs of the MOR using an arbitrary waveform generator coupled to an amplitude modulator. The amplitude modulation element is a two stage, Lithium Niobate waveguide device, where the intensity of the light passing through the device is a function of the electrical drive applied. The first stage of the modulator is connected to a programmable high performance Arbitrary Waveform Generator (AWG) consisting of 140 impulse generators space 250 ps apart. An arbitrary waveform is generated by independently varying the amplitude of each impulse generator and then summing the impulses together. In addition to the AWG a short pulse generator is also connected to the first stage of the modulator to provide a sub 100-ps pulse used for timing experiments. The second stage of the modulator is connect to a square pulse generator used to further attenuate any pre or post pulse light passing through the first stage of the modulator. The fast rise and fall time of the square pulse generator is also used to produce fast rise and fall times of the AWG by clipping the AWG pulse. For maximum extinction, a pulse bias voltage is applied to each stage of the modulator. A pulse voltage is applied as opposed to a DC voltage to prevent charge buildup on the modulator. Each bias voltage is adjustable to provide a minimum of 50-dB extinction. The AMC is controlled through ICCS to generate the desired temporal pulse shape. This process involves a closed-loop control algorithm, which compares the desired temporal waveform to the produced optical pulse, and iterates the programming of the AWG until the two waveforms agree within an allowable tolerance.

42 ENGINEERING↗

Depth of the Disintegrated Layer in the Abrasive Finishing of Single Crystals

The abrasive finishing of monocrystalline lithium niobate is considered. The action of abrasive grains on the surface of the workpiece creates a layer of disintegrated material. The depth F of the disintegrated layer may be calculated as F = 12h, where h is the height of the surface relief, corresponding to the roughness R{sub max}.

36 MATERIALS SCIENCE↗

Effects of Coating on the Electrochemical Performance of a Nickel-Rich Cathode Active Material

Due to their safety and high power density, one of the most promising types of all-solid-state lithium batteries is the one made with the argyrodite solid electrolyte (ASE). Although substantial efforts have been made toward the commercialization of this battery, it is still challenged by some technical issues. One of these issues is to prevent the side reactions at the interface of the ASE and the cathode active material (CAM). A solution to address this issue is to coat the CAM particles with a material that is compatible with both ASE and CAM. Prior studies show that the lithium niobate, LiNbO 3 , (LNO) is a promising material for coating CAM particles to reduce the interfacial side reactions. However, no systematic study is available in the literature to show the effect of coating LNO on CAM performance. This paper aims to quantify the effect of LNO coating on the electrochemical performance of a nickel-rich CAM. The electrochemical performance parameters that are studied are the capacity, cycling performance, and rate performance of the coated-CAM; and the effectiveness of the coating to prevent the side reactions at the ASE and CAM interface is out of the scope of this study. To eliminate the effect of side reactions at the ASE and CAM interface, we conduct all tests in the organic liquid electrolyte (OLE) cells to solely present the effect of coating on the CAM performance. For this purpose, 0.5 wt.% and 1 wt.% LNO are used to coat the LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-60) CAM through two synthesizing methods. Consequently, the effects of the synthesizing method and the coating weight percentage on the NMC-60 performance are presented.

10 SYNTHETIC FUELS↗

High-Quality Dry Etching of LiNbO3 Assisted by Proton Substitution through H2-Plasma Surface Treatment

The exceptional material properties of Lithium Niobate (LiNbO3) make it an excellent material platform for a wide range of RF, MEMS, phononic and photonic applications; however, nano-micro scale device concepts require high fidelity processing of LN films. Here, we reported a highly optimized processing methodology that achieves a deep etch with nearly vertical and smooth sidewalls. We demonstrated that Ti/Al/Cr stack works perfectly as a hard mask material during long plasma dry etching, where periodically pausing the etching and chemical cleaning between cycles were leveraged to avoid thermal effects and byproduct redeposition. To improve mask quality on X- and Y-cut substrates, a H2-plasma treatment was implemented to relieve surface tension by modifying the top surface atoms. Structures with etch depths as deep as 3.4 µm were obtained in our process across a range of crystallographic orientations with a smooth sidewall and perfect verticality on several crystallographic facets.

36 MATERIALS SCIENCE↗