Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molecular dynamics simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Molecular Dynamics Free Energy Simulations Reveal the Mechanism for the Antiviral Resistance of the M66I HIV-1 Capsid Mutation

While drug resistance mutations can often be attributed to the loss of direct or solvent-mediated protein−ligand interactions in the drug-mutant complex, in this study we show that a resistance mutation for the picomolar HIV-1 capsid (CA)-targeting antiviral (GS-6207) is mainly due to the free energy cost of the drug-induced protein side chain reorganization in the mutant protein. Among several mutations, M66I causes the most suppression of the GS-6207 antiviral activity (up to ~84,000-fold), and only 83- and 68-fold reductions for PF74 and ZW-1261, respectively. To understand the molecular basis of this drug resistance, we conducted molecular dynamics free energy simulations to study the structures, energetics, and conformational free energy landscapes involved in the inhibitors binding at the interface of two CA monomers. To minimize the protein−ligand steric clash, the I66 side chain in the M66I−GS-6207 complex switches to a higher free energy conformation from the one adopted in the apo M66I. In contrast, the binding of GS-6207 to the wild-type CA does not lead to any significant M66 conformational change. Based on an analysis that decomposes the absolute binding free energy into contributions from two receptor conformational states, it appears that it is the free energy cost of side chain reorganization rather than the reduced protein−ligand interaction that is largely responsible for the drug resistance against GS-6207.

Sun, Qinfang (ORCID:0000000173621543)↗
DOE OSTI2023

Graph-based quantum response theory and shadow Born–Oppenheimer molecular dynamics

Graph-based linear scaling electronic structure theory for quantum-mechanical molecular dynamics simulations [A. M. N. Niklasson et al., J. Chem. Phys. 144, 234101 (2016)] is adapted to the most recent shadow potential formulations of extended Lagrangian Born–Oppenheimer molecular dynamics, including fractional molecular-orbital occupation numbers [A. M. N. Niklasson, J. Chem. Phys. 152, 104103 (2020) and A. M. N. Niklasson, Eur. Phys. J. B 94, 164 (2021)], which enables stable simulations of sensitive complex chemical systems with unsteady charge solutions. The proposed formulation includes a preconditioned Krylov subspace approximation for the integration of the extended electronic degrees of freedom, which requires quantum response calculations for electronic states with fractional occupation numbers. For the response calculations, we introduce a graph-based canonical quantum perturbation theory that can be performed with the same natural parallelism and linear scaling complexity as the graph-based electronic structure calculations for the unperturbed ground state. Further, the proposed techniques are particularly well-suited for semi-empirical electronic structure theory, and the methods are demonstrated using self-consistent charge density-functional tight-binding theory both for the acceleration of self-consistent field calculations and for quantum-mechanical molecular dynamics simulations. Graph-based techniques combined with the semi-empirical theory enable stable simulations of large, complex chemical systems, including tens-of-thousands of atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Shock-induced chemistry and high strain-rate viscoelastic behavior of a phenolic polymer

We use impact experiments and a finite element model (up to 1.2 GPa), and molecular dynamics simulations (up to 60 GPa), to examine the behavior of a phenolic polymer under shock compression, spanning both nonreactive and reactive regimes. In the nonreactive regime, relaxation following compression at strain rates of ∼105 s−1 can be explained by viscoelasticity observed at ordinary laboratory rates (≲1 s−1) by accounting for the temperature dependence of the phenolic β-transition. Reasonable agreement is found between the measured shock Hugoniot up to 1.2 GPa and molecular dynamics simulation for cross-linked structures of comparable density. We also observed a first-order mechanical transition near 0.36 GPa shock stress and estimated a spall strength of 0.102 GPa and Hugoniot elastic limit of 1–2 GPa. The shock stress is found to vary up to 24% among phenolics made with different resin and/or cure processes. Finally, molecular dynamics simulations are used to identify a reactive regime at shock pressures ≳20 GPa that is characterized by chemically driven, rate-dependent relaxation processes, including dehydrogenation and dehydration reactions that promote the formation of a dense, highly cross-linked carbonaceous solid and the release of light volatiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CTRAMER: An open-source software package for correlating interfacial charge transfer rate constants with donor/acceptor geometries in organic photovoltaic materials

In this paper, we present CTRAMER (Charge-Transfer RAtes from Molecular dynamics, Electronic structure, and Rate theory)—an opensource software package for calculating interfacial charge-transfer (CT) rate constants in organic photovoltaic (OPV) materials based on ab initio calculations and molecular dynamics simulations. The software is based on identifying representative donor/acceptor geometries within interfacial structures obtained from molecular dynamics simulation of donor/acceptor blends and calculating the corresponding Fermi’s golden rule CT rate constants within the framework of the linearized-semiclassical approximation. While the methods used are well established, the integration of these state-of-the-art tools originating from different disciplines to study photoinduced CT processes with explicit treatment of the environment, in our opinion, makes this package unique and innovative. The software also provides tools for investigating other observables of interest. After outlining the features and implementation details, the usage and performance of the software are demonstrated with results from an example OPV system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimization of Thermal Conductance at Interfaces Using Machine Learning Algorithms

We report optimization of thermal transport across the interface of two different materials is critical to micro-/nanoscale electronic, photonic, and phononic devices. Although several examples of compositional intermixing at the interfaces having a positive effect on interfacial thermal conductance (ITC) have been reported, an optimum arrangement has not yet been determined because of the large number of potential atomic configurations and the significant computational cost of evaluation. On the other hand, computation-driven materials design efforts are rising in popularity and importance. Yet, the scalability and transferability of machine learning models remain as challenges in creating a complete pipeline for the simulation and analysis of large molecular systems. In this work we present a scalable Bayesian optimization framework, which leverages dynamic spawning of jobs through the Message Passing Interface (MPI) to run multiple parallel molecular dynamics simulations within a parent MPI job to optimize heat transfer at the silicon and aluminum (Si/Al) interface. We found a maximum of 50% increase in the ITC when introducing a two-layer intermixed region that consists of a higher percentage of Si. Because of the random nature of the intermixing, the magnitude of increase in the ITC varies. We observed that both homogeneity/heterogeneity of the intermixing and the intrinsic stochastic nature of molecular dynamics simulations account for the variance in ITC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bayesian force fields from active learning for simulation of inter-dimensional transformation of stanene

Abstract We present a way to dramatically accelerate Gaussian process models for interatomic force fields based on many-body kernels by mapping both forces and uncertainties onto functions of low-dimensional features. This allows for automated active learning of models combining near-quantum accuracy, built-in uncertainty, and constant cost of evaluation that is comparable to classical analytical models, capable of simulating millions of atoms. Using this approach, we perform large-scale molecular dynamics simulations of the stability of the stanene monolayer. We discover an unusual phase transformation mechanism of 2D stanene, where ripples lead to nucleation of bilayer defects, densification into a disordered multilayer structure, followed by formation of bulk liquid at high temperature or nucleation and growth of the 3D bcc crystal at low temperature. The presented method opens possibilities for rapid development of fast accurate uncertainty-aware models for simulating long-time large-scale dynamics of complex materials.

Chemistry↗
DOE OSTI2024

High-pressure phase transition in 3-D printed nanolamellar high-entropy alloy by imaging and simulation insights

Abstract We report on the high-resolution imaging and molecular dynamics simulations of a 3D-printed eutectic high-entropy alloy (EHEA) Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 consisting of nanolamellar BCC and FCC phases. The direct lattice imaging of 3D-printed samples shows the Kurdjumov–Sachs (K–S) orientation relation {111} FCC parallel to {110} BCC planes in the dual-phase lamellae. Unlike traditional iron and steels, this alloy shows an irreversible BCC-to-FCC phase transformation under high pressures. The nanolamellar morphology is maintained after pressure cycling to 30 GPa, and nano-diffraction studies show both layers to be in the FCC phase. The chemical compositions of the dual-phase lamellae after pressure recovery remain unchanged, suggesting a diffusion-less BCC–FCC transformation in this EHEA. The lattice imaging of the pressure-recovered sample does not show any specific orientation relation between the two resulting FCC phases, indicating that many grain orientations are produced during the BCC–FCC phase transformation. Molecular dynamics simulations on phase transformation in a nanolamellar BCC/FCC in K–S orientation show that phase transformation from BCC to FCC is completed under high pressures, and the FCC phase is retained on decompression aided by the stable interfaces. Our work elucidates the irreversible phase transformation under static compression, providing an understanding of the orientation relationships in 3-D printed EHEA under high pressures.

3-D Printing↗
DOE OSTI2025

Developing reliable machine learning interatomic potential for Fe–Cr–Ni austenitic alloys

Gaining atomistic understanding of mechanical behavior of heat-resistant structural materials such as Fe–Cr–Ni-based alloys requires an approach with an accuracy close to density functional theory (DFT) that considers the intrinsic properties of the bulk lattice and important defects such as stacking faults, grain boundaries, and surfaces. This work aims to develop reliable machine learning interatomic potential (MLIAP) at cross-scale for Fe–Cr–Ni ternary alloys with a focus on the face-centered-cubic (fcc) solid solution structure. Leveraging the advantages of moment tensor potentials, which typically necessitate a relatively small training dataset and enable rapid calculations using the large-scale atomic/molecular massively parallel simulator package, we ensure the stability and accuracy of the trained potentials. Important defects such as stacking faults, grain boundaries, and surfaces for wide-range compositions are investigated. Structural, thermal, elastic, and defect properties are determined from molecular dynamics simulations comprising several thousand atoms, generated via canonical Monte Carlo simulations guided by the trained potential. The trained potential allows efficient atomic simulations of structural, thermal, and mechanical properties of fcc Fe–Cr–Ni solid solution alloys as a function of composition and temperature. Therefore, the MLIAP approach represents a major advancement from DFT calculations that are limited to small simulation sizes and traditional molecular dynamics simulations using relatively low accuracy potentials. Furthermore, this work outlines a practical foundation for further investigating the structural evolution and mechanical behavior of austenitic stainless steel and nickel-based alloys in a wide array of applications in extreme environments.

Crystal structure↗
DOE OSTI2021

Granular Flow

LIGGGHTS-INL is a capability-extended version of LIGGGHTS. LIGGGHTS is an Open Source Discrete Element Method Particle Simulation Software (https://www.cfdem.com/media/DEM/docu/Manual.html). LIGGGHTS stands for LAMMPS improved for general granular and granular heat transfer simulations. LAMMPS is a classical molecular dynamics simulator. It is widely used in the field of Molecular Dynamics (https://lammps.sandia.gov/doc/Manual.html). Thanks to physical and algorithmic analogies, LAMMPS is a very good platform for DEM simulations. LAMMPS offers a GRANULAR package to perform these kinds of simulations. LIGGGHTS aims to improve those capability with the goal to apply it to industrial applications.

Xia, Yidong↗
DOE OSTI2024

Machine Learning Enabled Atomistic Study of the Micro-Cold Spray Process [Poster]

Micro-cold spray is typically conducted by impacting 200-2000 nm particles at velocities of ~500 m/s. Molecular dynamics simulations have been used to study micro cold spray, but the particles that can be simulated using conventional potentials are much smaller than those used experimentally. The viewgraphs taken from molecular dynamics simulations and shown below are cross-sections of a 50 nm Ta particle with a 3 nm oxide layer impacting at 500 m/s using a machine learning enabled DeePMD potential. Using more expensive reactive interatomic potentials, the previous largest particle size for a metal/oxide impact simulation was 12 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Grain growth of nanocrystalline aluminum under tensile deformation: A combined in situ TEM and atomistic study

Nanocrystalline Al thin films have been strained in situ in a transmission electron microscope using two separate nanomechanical techniques involving a push-to-pull device and a microelectromechanical system (MEMS) device. Deformation-induced grain growth was observed to occur via stress-assisted grain boundary migration with extensive grain growth occurring in the necked region, indicating that the increase in local stress drives the boundary migration. Under applied tensile stresses close to the ultimate tensile strength of 450 MPa for a nanocrystalline Al specimen, measured boundary migration speeds are 0.2 – 0.7 nm s -1 for grains outside necked region and increases to 2.5 nm s -1 for grains within the necked region where the local estimated tensile stresses are elevated to around 630 MPa. By tracking grain boundary motion over time, molecular dynamics simulations showed qualitative agreement in terms of pronounced grain boundary migration with the experimental observations. The combined in situ observation and molecular dynamics simulation results underscore the important role of stress-driven grain growth in plastically deforming nanocrystalline metals, leading to intergranular fracture through predominant grain boundary sliding in regions with large localized deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Custom-trained Machine-learning Interatomic Potentials: ZnCl2 Aqueous Solution

This dataset was generated using an iterative active-learning strategy implemented in the ArcaNN software package (https://github.com/arcann-chem/arcann_training) to train machine-learning interatomic potentials for aqueous ZnCl2 solutions. Each active-learning cycle consisted of three stages: training, exploration, and labeling. The initial training set combined configurations generated in this work from enhanced-sampling ab initio molecular dynamics simulations with configurations from a previously reported neural-network-potential study of aqueous ZnCl2. The enhanced-sampling ab initio molecular dynamics simulations involved Zn–Cl separation and the chloride coordination number around Zn²? as collective variables. These configurations served as the seed dataset. Subsequent active-learning cycles expanded the training set by identifying and labeling configurations that were poorly represented by the current models, thereby improving coverage of ion-association states and changes in local coordination and charge-state environments relevant to the solution free-energy landscape. For all selected configurations, single-point calculations of the total energies and atomic forces were performed within density functional theory using the CP2K Quickstep module. Reference calculations employed the revPBE-D3 and r2SCAN exchange-correlation functionals. Motivated by recent work on aqueous Zn²?, the main revPBE calculations omitted D3 dispersion contributions involving Zn²?, while retaining the D3 correction for water and chloride. For comparison, fully dispersion-corrected revPBE-D3 reference calculations were also performed, with D3 applied to all species, including Zn²?. Valence electrons were treated explicitly, while core electrons were represented using norm-conserving Goedecker–Teter–Hutter pseudopotentials. The wave functions were expanded using the mixed Gaussian-and-plane-wave scheme with TZV2P-MOLOPT basis sets for all elements and a 600 Ry auxiliary plane-wave cutoff for the electron density. Self-consistent-field convergence was accelerated using the orbital-transformation and Direct Inversion in the Iterative Subspace algorithms, with a convergence threshold of 10?6. All single-point calculations were performed in periodic orthorhombic cells. The CELL_REF keyword in CP2K was used to define a fixed reference cell with a box length of 25 Å. This treatment ensured a consistent reference for configurations extracted from NpT trajectories with fluctuating cell dimensions. The resulting DFT energies and atomic forces constitute the ground-truth labels used to train the MLIPs. The resulting MLIP was trained for aqueous ZnCl2 solutions spanning concentrations from 0 to 30 molal and a broad pH range, from strongly acidic to strongly basic conditions. Representative examples of configurations included in the MLIP training dataset are provided below. These include 1) Representative configurations from the dataset labeled at the revPBE-D3 level, with D3 dispersion interactions involving Zn2+ excluded (revPBE-wo-D3). 2) Representative configurations from the dataset labeled at the fully dispersion-corrected revPBE-D3 level, with D3 interactions applied to all species, including Zn2+ (revPBE-D3). 3) Representative configurations from the dataset labeled at the r2SCAN level of theory (r2SCAN).

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗
DOE OSTI2021

Flow of long chain hydrocarbons through carbon nanotubes (CNTs)

The pressure-driven flow of long-chain hydrocarbons in nanosized pores is important in energy, environmental, biological, and pharmaceutical applications. This paper examines the flow of hexane, heptane, and decane in carbon nanotubes (CNTs) of pore diameters 1–8 nm using molecular dynamic simulations. Enhancement of water flow in CNTs in comparison to rates predicted by continuum models has been well established in the literature. Our work was intended to observe if molecular dynamic simulations of hydrocarbon flow in CNTs produced similar enhancements. We used the OPLS-AA force field to simulate the hydrocarbons and the CNTs. Our simulations predicted the bulk densities of the hydrocarbons to be within 3% of the literature values. Molecular sizes and shapes of the hydrocarbon molecules compared to the pore size create interesting density patterns for smaller sized CNTs. We observed moderate flow enhancements for all the hydrocarbons (1–100) flowing through small-sized CNTs. For very small CNTs the larger hydrocarbons were forced to flow in a cork-screw fashion. As a result of this flow orientation, the larger molecules flowed as effectively (similar enhancements) as the smaller hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Failure of molecular dynamics to provide appropriate structures for quantum mechanical description of the aqueous chloride ion charge-transfer-to-solvent ultraviolet spectrum

The lowest band in the charge-transfer-to-solvent ultraviolet absorption spectrum of aqueous chloride ion is studied by experiment and computation. Interestingly, the experiments indicate that at concentrations up to at least 0.25 M, where calculations indicate ion pairing to be significant, there is no notable effect of ionic strength on the spectrum. The experimental spectra are fitted to aid comparison with computations. Classical molecular dynamic simulations are carried out on dilute aqueous Cl - , Na + , and NaCl, producing radial distribution functions in reasonable agreement with experiment and, for NaCl, clear evidence of ion pairing. Clusters are extracted from the simulations for quantum mechanical excited state calculations. Accurate ab initio coupled-cluster benchmark calculations on a small number of representative clusters are carried out and used to identify and validate an efficient protocol based on time-dependent density functional theory. The latter is used to carry out quantum mechanical calculations on thousands of clusters. The resulting computed spectrum is in excellent agreement with experiment for the peak position, with little influence from ion pairing, but is in qualitative disagreement on the width, being only about half as wide. It is concluded that simulation by classical molecular dynamics fails to provide an adequate variety of structures to explain the experimental CTTS spectrum of aqueous Cl - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Melting point of iron at high pressure: An assessment of uncertainties and effect of electronic temperature

An accurate calculation of the melting point of iron at various pressures in the Earth's core is important for understanding the core structure, geodynamo, and the Earth's history. Previous studies have assessed the melt line of iron at these extreme conditions using various experimental measurement techniques as well as both ab initio and classic molecular dynamics simulations. However, experimental measurements have uncertainties up to several hundred Kelvin, and inconsistencies remain among simulation results. Here in this work, we propose an iterative framework that couples density functional theory (DFT) calculations and molecular dynamics simulations performed using an ensemble of interatomic potentials to assess the effect of electronic temperature on the melting point. We systematically validate the potentials by comparing lattice constants and phonon dispersion curves at 0 K and enthalpy differences between liquid and HCP, FCC, BCC phases of iron close to the melt line at 300 GPa with DFT. Our results show that HCP iron melts at 6144 K (at 300 GPa), BCC phase is thermodynamically unstable, and FCC is metastable at this temperature. The melting points of FCC and BCC phases at 300 GPa are 5858 and 5647 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Accurate and efficient parameterization of an atomic cluster expansion (ACE) potential for ammonia under extreme conditions

We present a machine learning interatomic potential for ammonia designed to capture its complex multiphase behavior, including both molecular and superionic phases. The potential is based on the atomic cluster expansion (ACE) formulation and has been parameterized to facilitate high-fidelity molecular dynamics simulations of ammonia under extreme conditions, for pressures up to 100 GPa and for temperatures above 500 K and up to 6000 K. A diverse range of configurations was generated through high-quality ab initio molecular dynamics simulations, covering insulating and superionic ice phases, liquid ammonia, molecular nitrogen (N 2 ) and hydrogen (H 2 ), and metastable compounds that form upon dissociation, including $NH^{+}_{4}$, $H^{+}_{3}$, N 2 H 4 , and N 3 H. We demonstrate that the ammonia ACE potential accurately reproduces experimental and density functional theory predicted isotherms and Hugoniots. Crucially, the potential is able to capture the intricate phase behavior of ammonia, including the transition from insulating molecular fluid to the superionic phase. This work provides a robust interatomic potential that can be used for large-scale, accurate simulations of ammonia under extreme thermodynamic conditions, offering a powerful tool for investigating its behavior in various phases and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structure and Dynamics of CO 2 at the Air–Water Interface from Classical and Neural Network Potentials

The accurate description of the structure and dynamics of CO 2 at the instantaneous air–water interface, along with the effects of surface fluctuations on the CO 2 -transport processes, is essential for the development of negative emission technologies aimed at minimizing climate change. In this study, we performed molecular dynamics simulations of CO 2 at the air–water interface using neural network potentials (NNPs) trained on ab initio data generated through density-functional-theory-based molecular dynamics simulations. We compared these results with classical force fields to assess their performance in modeling interfacial CO 2 behavior. Our findings revealed that the asymmetric interactions, coupled with thermal surface fluctuations at the air–water interface, significantly influence CO 2 transport into the aqueous phase. The simulations demonstrate that classical force fields underestimate both the free energy of CO 2 transport and the strength of its interactions at the interface compared with the neural network potentials. In conclusion, the free energy and the interfacial dynamics of CO 2 are primarily influenced by the distribution of water within the instantaneous interfacial water layer, responsible for creating an asymmetric intermolecular interaction environment within the interfacial region.

Ab initio molecular dynamics↗
DOE OSTI2022

Functionalization of Electrodes with Tunable [EMIM] x [Cl] x +1 – Ionic Liquid Clusters for Electrochemical Separations

Functionalization of electrodes with clusters of hydrophobic molecules may improve the energy efficiency and selectivity of electrochemical separations by modulating the desolvation process occurring at the interface. Ionic liquids (IL), which have a broad range of compositions and properties, are potential candidates for controlling the transport, desolvation, and adsorption of target ions at electrochemical interfaces. We report a joint experimental and theoretical investigation of the structure, stability, and selective adsorption properties of the IL clusters 1-ethyl-3-methylimidazolium chloride [EMIM] x [Cl] x+1 - (x = 1 – 10) and demonstrate their ability to adsorb and separate ions from solution. The structure and stability of the IL clusters are determined experimentally using high-mass-resolution electrospray ionization mass spectrometry, collision-induced dissociation, and negative ion photoelectron spectroscopy. Global optimization theory and ab initio molecular dynamics simulations provide molecular-level insight into the bonding and structural fluxionality of these species. Ion soft landing is used to selectively functionalize the surface of highly oriented pyrolytic graphite (HOPG) working electrodes with [EMIM] 1 [Cl] 2 - , [EMIM] 3 [Cl] 4 - , and [EMIM] 5 [Cl] 6 - clusters. Kelvin probe microscopy provides insight into the relative stability of the clusters on HOPG and their effect on the work function of IL-functionalized electrodes. Cyclic voltammetry measurements reveal irreversible adsorption of Fe(CN) 6 4-/3- anions during redox cycling, while electrochemical impedance spectroscopy indicates a substantial decrease in the electron transfer resistance of the IL-functionalized electrodes due to adsorption of Fe(CN) 6 4-/3- . Overall, our findings demonstrate that IL clusters with different size and stoichiometry may be used to increase the efficiency of electrochemical separations, opening new horizons in selective electrode functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗