Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modernization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Some modern control techniques for human operator modeling and identification

Some recent results in quantitative modeling of the human operator are reviewed as well as a method for processing his input-output data. Modern control techniques are applied to the pilot operating in a dynamic compensatory tracking task. Trained pilots are known to behave in an optimal manner under fully stressed conditions. This has led to the development of an optimal control model of the human operator which takes his limitations into account. A rationale for determining the appropriate cost functions is determined. Experimental results indicate that the model can closely predict pilot performance in one- or two-axis tracking tasks. The model predicts pilot remnant (noise), error scores, and frequency response in both single-axis and multi-axis tracking tasks.

Shirley, R. S.↗
NASA NTRS1977

Feasibility of modern airships - Preliminary assessment

Attention is given to the NASA program, Feasibility Study of Modern Airships, initiated to investigate potential research and technology programs associated with airship development. A historical survey of the program is presented, including the development of past airship concepts, aerodynamical and design improvements, structure and material concepts, and research in controls, avionics, instrumentation, flight operations, and ground handling. A mission analysis was carried out which considered passenger and cargo transportation, heavy-lift, short-haul applications, surveillance missions, and the transportation of natural gas. A vehicle parametric analysis examined the entire range of airship concepts, discussing both conventional airships and hybrids. Various design options were evaluated, such as choice of structural materials, use of boundary-layer control, and choice of lifting gas.

Ardema, M. D.↗
NASA NTRS1978

Mechanical and physical properties of modern boron fibers

Measurements of the Young's modulus, flexural modulus, shear modulus and Poisson's ratio for boron fibers prepared by modern deposition techniques are reported. Physical properties of the boron fibers, including density, thermal expansion and resistance, are also surveyed. In addition, prediction of the total deformation strain in an anelastic boron fiber subjected to tensile or flexural stress is discussed.

Dicarlo, J. A.↗
NASA NTRS1980

Modern programming language

Structural-programming language is especially-tailored for producing assembly language programs for MODCOMP II and IV mini-computes. Modern programming language consists of set of simple and powerful control structures that include sequencing alternative selection, looping, sub-module linking, comment insertion, statement continuation, and compilation termination capabilities.

Feldman, G. H.↗
NASA NTRS1979

Modern estimation techniques applied to microwave sensing of the marine boundary layer

Previous efforts in the area of satellite microwave sensing of the marine boundary layer have relied upon linear regression techniques to extract geophysical parameters from the microwave measurement data. The approach used in the present paper shifts emphasis away from the generation of regression weighting matrices which implicitly assume that the data are linear in the parameters to be determined and that the problem is statistically stationary. The idea is simply to employ modern computational estimation techniques to obtain parameter estimates from nonlinear noisy measurements. The approach is limited only to the region of validity of Grody's (1976) model. Attention is focused on documenting how estimation techniques, in particular the square root information filter (SRIF), are used to solve a nonlinear function optimization problem.

Bierman, G. J.↗
NASA NTRS1979

The size and performance effects of high lift system technology on a modern twin engine jet transport

The energy and economic benefits of low-speed aerodynamic system technology applied to a modern 200-passenger, 2000-nmi range, twin engine jet transport are reviewed. Results of a new method to design flap systems at flight Reynolds number are summarized. The study contains the airplane high lift configuration drag characteristics and design selection charts showing the effect of flap technology on the airplane size and performance. The study areas include: wing and flap geometry, climb and descent speed schedules with partial flap deflection, flap system technology, and augmented stability. The results compare the improvements in payload from a hot, high elevation airport.

Sullivan, R. L.↗
NASA NTRS1979

A parametric wing design study for a modern laminar flow wing

The results of a parametric wing design study using a modern laminar flow airfoil designed to exhibit desirable stall characteristics while maintaining high cruise performance are presented. It was found that little is sacrificed in cruise performance when satisfying the stall margin requirements if a taper ratio of 0.65 or greater is used.

Koegler, J. A., Jr.↗
NASA NTRS1980

Gnotobiology in modern medicine

A review is given of currently accepted theories and applications of gnotobiology. A brief history of gnotobiology is supplied. Problems involved in creating germ-free gnotobiota and the use of these animals in experimental biology are cited. Examples of how gnotobiology is used in modern medical practice illustrate the future prospects for this area of science.

Podoprigora, G. I.↗
NASA NTRS1981

Classical and modern control design of a speed-hold system for a STOL airplane

A speed-hold system for an experimental short takeoff and landing jet airplane has been designed using both classical root-locus and modern optimal control synthesis techniques. The purpose of the speed-hold system is to maintain airspeed during final approach in the presence of wind shears, gusts, engine failures, and pilot control inputs. Designs were based on using airspeed as a single measurement and two symmetrically deployed upper surface blown flaps as a single control. An optimal control law feeding back all the states and the integral of airspeed through constant gains provided superior performance in terms of speed tracking and control surface activity. However, when a constant-gain Kalman filter was inserted to estimate the states using only the measurement of airspeed, the performance of the optimal control law was reduced to the same as that of a much simpler classical proportional-path plus integral-path control law. To improve the performance of the optimal control law, additional measurements would be required.

Blight, J. D.↗
NASA NTRS1981

Predesign study for a modern 4-bladed rotor for the NASA rotor systems research aircraft

Trade-off study results and the rationale for the final selection of an existing modern four-bladed rotor system that can be adapted for installation on the Rotor Systems Research Aircraft (RSRA) are reported. The results of the detailed integration studies, parameter change studies, and instrumentation studies and the recommended plan for development and qualification of the rotor system is also given. Its parameter variants, integration on the RSRA, and support of ground and flight test programs are also discussed.

Bishop, H. E.↗
NASA NTRS1981

Pre-design study for a modern four-bladed rotor for the Rotor System Research Aircraft (RSRA)

Various candidate rotor systems were compared in an effort to select a modern four-bladed rotor for the RSRA. The YAH-64 rotor system was chosen as the candidate rotor system for further development for the RSRA. The process used to select the rotor system, studies conducted to mate the rotor with the RSRA and provide parametric variability, and the development plan which would be used to implement these studies are presented. Drawings are included.

Hughes, C. W.↗
NASA NTRS1980

A modern control approach to the design of the SPS control system

The structural dynamics of the solar power satellite were considered. The requirements on the vibration of the microwave antenna and the possibility of thermal induced vibration and severe structural-thermal interactions were considered. The possibility of using an active control system and modern control methods to mitigate structural problems is discussed.

Gran, R.↗
NASA NTRS1982

The role of modern control theory in the design of controls for aircraft turbine engines

The development, applications, and current research in modern control theory (MCT) are reviewed, noting the importance for fuel-efficient operation of turbines with variable inlet guide vanes, compressor stators, and exhaust nozzle area. The evolution of multivariable propulsion control design is examined, noting a basis in a matrix formulation of the differential equations defining the process, leading to state space formulations. Reports and papers which appeared from 1970-1982 which dealt with problems in MCT applications to turbine engine control design are outlined, including works on linear quadratic regulator methods, frequency domain methods, identification, estimation, and model reduction, detection, isolation, and accommodation, and state space control, adaptive control, and optimization approaches. Finally, NASA programs in frequency domain design, sensor failure detection, computer-aided control design, and plant modeling are explored

Zeller, J.↗
NASA NTRS1980

Application of modern time series analysis to high stability oscillators

Techniques of modern time series analysis useful for investigating the characteristics of high-stability oscillators and identifying systematic perturbations are discussed with reference to an experiment in which the frequencies of superconducting cavity-stabilized oscillators and hydrogen masers were compared. The techniques examined include transformation to stationarity, autocorrelation and cross-correlation, superresolution, and transfer function determination.

Farrell, B. F.↗
NASA NTRS1981

Predesign study for a modern 4-bladed rotor for RSRA

The feasibility of providing a modern four-bladed rotor for flight research testing on a rotor system aircraft was evaluated. The capabilities of a state of the art rotor system and the contributions of key design parameters to these capabilities were investigated. Three candidate rotors were examined: the UH-60A BLACK HAWK rotor with and without root extenders and the H-3 composite blade rotor. It was concluded that the technical/cost objectives could best be accomplished using the basic BLACK HAWK rotor (i.e. without root extenders). Further, the availability of three existing sets of blade tip of varying design, together with a demonstrated capability for altering airfoil geometry should provide early research information on important design variables at reduced cost.

Davis, S. J.↗
NASA NTRS1982

On the establishment and maintenance of a modern conventional terrestrial reference system

The frame of the Conventional Terrestrial Reference System (CTS) is defined by an adopted set of coordinates, at a fundamental epoxh, of a global network of stations which contribute the vertices of a fundamental polyhedron. A method to estimate this set of coordinates using a combination of modern three dimensional geodetic systems is presented. Once established, the function of the CTS is twofold. The first is to monitor the external (or global) motions of the polyhedron with respect to the frame of a Conventional Inertial Reference System, i.e., those motions common to all stations. The second is to monitor the internal motions (or deformations) of the polyhedron, i.e., those motions that are not common to all stations. Two possible estimators for use in earth deformation analysis are given and their statistical and physical properties are described.

Bock, Y.↗
NASA NTRS1985

The design, development, and flight testing of a modern-control-designed autoland system

This paper discusses the design, development, and flight test results of a full-state feedback modern-controls-designed autoland system - the Digital Integrated Automatic Landing System (DIALS). The lateral and longitudinal control laws were designed by formulating a linear quadratic regulator with disturbances problem. Although the designs were independent of each other, in implementation cross-coupling of the lateral and longitudinal variables does occur. A brief discussion of the control modes - localizer capture, localizer track, decrab, glideslope capture, glideslope track, and flare - and the modifications made to the basic design during the simulation phase to achieve desired performance is given. Some of the efforts required to implement the system in the flight computers and some problems encountered in the ground hardware simulation checkout are discussed. Finally, flight test data is presented for this system which performed 10 'hands off' automatic landings. The flight test data includes the performance of the aircraft in mild, gust, and wind shear conditions.

Hueschen, R. M.↗