Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys

Microstructure and mechanical properties of two kinds of oxide dispersion strengthened concentrated solid solution alloys (CSAs), FeCoNi-1.5Y 2 O 3 (FCNY) and FeCoNi-1.2Ti-1.5Y 2 O 3 (FCNTY), are studied through a comparing investigation with FeCoNi (FCN) CSAs. All these alloys are fabricated by mechanical alloying, spark plasma sintering, hot rolling and annealing treatment. For three kinds of alloys, both the as-milled powders and bulk materials are of single face-centered cubic structure. Electron backscattered diffraction results reveal that the texture transformation is suppressed during the hot rolling process because the movement of grain boundaries is hindered by the oxide particles. Compared with FCN CSAs, grains are refined by 43% and 47% for FCNY and FCNTY CSAs, respectively. Nano-sized Y 2 O 3 (monoclinic structure) and Y 2 Ti 2 O 7 (pyrochlore structure) particles are uniformly distributed in FCNY and FCNTY CSAs, respectively. Both Y2O3 and Y2Ti2O7 particles show a semi-coherent relationship with the matrix. Yield strength of FCN, FCNY and FCNTY CSAs is 559, 981 and 1050 MPa, respectively. Theoretical calculations illustrate that high strength of FCNY and FCNTY CSAs comes from refined grains and high-density nano-sized oxide particles.

36 MATERIALS SCIENCE↗

Connect microstructure evolution to property degradation with validated simulation

Reliable material performance is required for plasma-facing material (PFM) candidates. Previous research has shown that plasma and neutron radiation exposure induces microstructural changes in PFMs; changes in thermal and electrical conductivities and in material hardening and embrittlement were also observed after neutron irradiation. These material property changes will negatively impact the performance of the PFMs in a fusion reactor. Despite the well-known connection between material microstructure, properties, and performance, there is a need for validated modeling capabilities connecting PFM property degradation with microstructural evolution under fusion-relevant conditions. We are developing a simulation capability to couple plasma-induced microstructural evolution to material property degradation. Our approach relies on deliberate mapping between individual simulation models and experimental characterization for validation. The open-source Multiphysics Object-Oriented Simulation Environment (MOOSE) software was used for this simulation capability development. A MOOSE phase-field model was coupled with the cluster dynamics code, Xolotl, to predict microstructural evolution. Microstructure characterization techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), and laser scanning confocal microscopy (LSCM) are used to validate these microstructural evolution simulations. Calculation of thermal and electrical conductivities with first principles simulations was performed for bulk material and for grain boundaries; these results are used within MOOSE models to calculate effective thermal and electrical conductivities as a function of grain characteristics. Thermoreflectance and four-probe techniques were employed to measure the thermal and electrical conductivities, respectively. A MOOSE crystal plasticity model was adapted to predict microstructure-sensitive deformation behavior, and X-ray diffraction (XRD) was used to collect bulk dislocation density data for validation. After individual simulation validation, these models are coupled to predict material property changes resulting from plasma exposure. We focused here on an experimental design to emphasize the separate effects of moderate thermal loads and plasma exposure using tungsten. Annealing of tungsten was performed under a protective environment for temperatures ranging from 500$^o$C to 1500$^o$C. The plasma exposure was completed in the Tritium Plasma Experiment at Idaho National Laboratory under a deuterium flux of 1e22 $\frac{D}{m^2s}$. This incremental approach is employed to build confidence in the modeling capability: separate-effects tests ensure that the models capture key mechanisms from single environmental conditions before predicting PFM property degradation under combined loads. We will show our early results from coupling these simulation models to predict PFM property changes from microstructural evolution. Comparisons of the simulation results with preliminary validation data will be discussed.

36 - MATERIALS SCIENCE↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ba Substitutions on Microstructure and Magnetic Properties of La–Ca–Co System Permanent Ferrite

La{sub 0.6}Ca{sub 0.4−x}Ba{sub x}O⋅n/2(Fe{sub 1−y}Co{sub y}){sub 2}O{sub 3}(x = 0, 0.05, 0.1, 0.15 and 0.2) permanent ferrite materials were prepared by ceramic technique. The topography and the structure were characterized by scanning electron microscopy (SEM) and x-ray diffraction (XRD), respectively. The magnetic properties were measured using vibrating sample magnetometer (VSM) and digital magnetometer. Single M-phase and flake-like grains were obtained for samples without Ba substitution(x = 0), and the magnetic properties of the pre-sintering La–Ca–Co ferrite were as follows: B{sub r} = 440 mT, H{sub cb} = 296 kA/m, H{sub cj} = 426 kA/m, (BH){sub max} = 36.6 kJ/m{sup 3} and H{sub k}/H{sub cj} = 0.83. When Ca was substituted by Ba, pre-sintered powder presents single M-phase structure and close three-dimensional size of grains, resulting in an improved rectangle ratio of sintered magnet. The rectangle ratio of sintered magnet reaches a maximum of 0.93 when x = 0.1. By optimizing process parameters, M-type La–Ca–Ba–Co sintered magnet was prepared with B{sub r} = 445 mT, H{sub cb} = 337 kA/m, H{sub cj} = 420 kA/m, (BH){sub max} = 38.6 kJ/m{sup 3} and H{sub k}/H{sub cj} = 0.95.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and Magnetic Properties of Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} Hexaferrites

Magnetoplumbite-type (M-type) barium ferrites doped with different Y–Co doping content Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) were successfully prepared by ceramic process and investigated in this paper for the first time. X-ray diffraction were used to analyze the phase of the prepared sample. The scanning electron microscopy (SEM) was used to measure the morphology, and magnetic properties were measured by vibrating sample magnetometer (VSM). The results of XRD show that the single phase of M-type barium ferrites was obtained with the increase of Co content (x), but α-Fe{sub 2}O{sub 3} occurred when x exceeds 0.3. The SEM results exhibit the uniform plane hexagonal structures of M-type ferrites with all range of Co doping content. VSM results display that magnetization (M{sub s}) and coercivity (H{sub c}) show the same tendency that their values first increase and then decrease with the increase of Co content.

36 MATERIALS SCIENCE↗

Investigation of Microstructural and Magnetic Properties of BaV{sub x}Fe{sub 12−x}O{sub 19} Nanohexaferrites

Nanohexaferrites of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) were prepared using sol–gel auto-combustion. The structure and morphology of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) nano-sized hexaferrites were explored by X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDXS. XRD analysis indicated particle size in the 55–60-nm interval. SEM and EDXS investigations confirmed the formation of the desired composition of V-substituted Ba-hexaferrites. The magnetic properties of products were studied. The magnetic M(H) hysteresis loops revealed that all produced nanohexaferrites display ferromagnetic-like comportment. The deduced saturation magnetization (M{sub s}), retentivity (M{sub r}), magneto-crystalline anisotropy fields (H{sub a}), and coercive field (H{sub c}) were enhanced for low V{sup 3+} contents and were maximum for BaV{sub 0.04}Fe{sub 11.96}O{sub 19} (x = 0.04) nanohexaferrites, showing the strengthening of magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, microstructure and magnetic properties of Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core

Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core have been synthesized via a modified stöber method combined with following high temperature sintering process. Most of conductive Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by insulating SiO{sub 2} using the modified stöber method. The Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles exhibited good soft magnetic properties with low coercivity and high saturation magnetization. The reaction 4Al+3SiO{sub 2}=2α-Al{sub 2}O{sub 3}+3Si took place during the sintering process. As a result the new Fe{sub 3}Si/Al{sub 2}O{sub 3} composite was formed. The Fe{sub 3}Si/Al{sub 2}O{sub 3} composite core displayed more excellent soft magnetic properties, better frequency stability at high frequencies, much higher electrical resistivity and lower core loss than the pure Fe{sub 3}Si{sub 0.7}Al{sub 0.3} core. The method of introducing insulating layers surrounding magnetic particles provides a promising route to develop new and high compact soft magnetic materials with good magnetic and electric properties. - Graphical abstract: In Fe{sub 3}Si/Al{sub 2}O{sub 3} composite, Fe{sub 3}Si phases are separated by Al{sub 2}O{sub 3} layers and the eddy currents are confined in Fe{sub 3}Si phases, thus increasing resistivity and reducing core loss. - Highlights: • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores were prepared. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by nano-sized SiO{sub 2} clusters. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores showed good soft magnetic properties. • Fe{sub 3}Si/Al{sub 2}O{sub 3} had lower core loss and better frequency stability than Fe{sub 3}Si{sub 0.7}Al{sub 0.3} cores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and fracture properties of open-cell porous Ti-6Al-4V with high porosity fabricated by electron beam melting

Highlights: • The Ti-6Al-4V foams with 80% high porosity are prepared by electron beam melting. • The ligament width appears to play the major role for mechanical properties. • The work of fracture is a linear function of ligament width and roughness/width ratio. - Abstract: The open-cell porous Ti-6Al-4V structure with high porosity, intended to be applied as replacement for human cancellous bone, were fabricated by electron beam melting (EBM). Computer aided design (CAD) was applied to design porous structures using the same unit cell with different unit cell sizes from 2.5 to 4 mm, different ligament widths from 600 to 900 μm, and different pore sizes from 1200 to 1800 μm, in order to achieve high porosity of 80% in avoiding the stress shielding effect. In comparison with the CAD designs and the EBM samples, there were minor discrepancies in terms of pore size and ligament width, mainly a result of melting pool. The measured data on the Young's modulus and yield strength of the EBM porous samples can be predicted by the Gibson and Ashby model. All samples with high porosity were found to match well with cancellous bone, with Young's modulus of 2 GPa and yield stress of 31 MPa, effective to diminish the risk of stress shielding effect. For porous EBM sample with high 80% porosity, the work of fracture can increase from 15.9 to 47.6 kJ/m{sup 2} with increasing ligament width from 600 to 900 μm.

36 MATERIALS SCIENCE↗

Effects of magnetic field assisted heat treatment on the microstructure and mechanical properties of Fe-0.63 %C alloy

This study investigates the influence of an applied magnetic field on the microstructural evolution and mechanical properties of hypoeutectoid steels subjected to heat treatment. Tensile tests and microstructural analysis were performed on samples processed under varying magnetic field strengths (0 T, 5 T, and 9 T) and different austenitization incubation times. The results indicate that the application of a magnetic field alters the fraction of proeutectoid ferrite phase without changing the cooling rates and heat treatment process. Additionally, pearlite microstructural features such as lamellar spacing and misorientation angles exhibit variations under different field strengths. While the pearlite nodule diameter remains largely unaffected, an increase in percentage elongation and strength is observed in the 5 T treated sample, attributed to changes in microstructural features with the magnetic field. Additionally, the percentage elongation is reduced in the samples heat treated with reduced austenitization incubation times. The study further demonstrates that low-angle misorientations increased in the samples taken parallel to the magnetic field direction, influencing the mechanical response. These findings suggest that applying a magnetic field during heat treatment provides an additional driving force for phase transformations, offering a manufacturing process for tailoring microstructures and optimizing mechanical properties. Moreover, integrating magnetic fields in heat treatment processes has potential benefits in energy efficiency.

High magnetic field↗

High Fidelity Ion Beam Simulation of High Dose Neutron Irradiation

The objective of this proposal is to demonstrate the capability to predict the evolution of microstructure and properties of structural materials in-reactor and at high doses, using ion irradiation as a surrogate for reactor irradiations. “Properties” includes both physical properties (irradiated microstructure) and the mechanical properties of the material. Demonstration of the capability to predict properties has two components. One is ion irradiation of a set of alloys to yield an irradiated microstructure and corresponding mechanical behavior that are substantially the same as results from neutron exposure in the appropriate reactor environment. Second is the capability to predict the irradiated microstructure and corresponding mechanical behavior on the basis of improved models, validated against both ion and reactor irradiations and verified against ion irradiations. Taken together, achievement of these objectives will yield an enhanced capability for simulating the behavior of materials in reactor irradiations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Microstructures and Mechanical Properties of Inconel 718 Alloy at Ultralow Temperatures

The microstructures and mechanical properties of powder metallurgy Inconel 718 alloy were investigated in the temperatures range between 25 and − 253 °C. Tensile strength increased with the decrease in temperature, while the ductility first increased and then decreased. There was no significant change in impact toughness. When the temperature was − 253 °C, a zigzag stress–strain curve was observed for the alloy, owing to the interaction of dislocation glide and twinning, which effectively maintained the relatively good ductility.

36 MATERIALS SCIENCE↗

Influence of humidity, temperature, and annealing on microstructure and tensile properties of electrospun polyacrylonitrile nanofibers

This study investigates the microstructure and mechanical properties of electrospun nanofibers from polyacrylonitrile (PAN)-dimethylformamide (DMF) solution at different relative humidity (RH) in the range from 14% to 60% and two different temperatures (20 °C and 40 °C). Nanofibers produced at low RH (22% or less at 20 °C) exhibit relatively smooth surface and solid core, whereas at higher RH (30% or higher at 20 °C) rough surface and porous core are observed. The resulting morphology is explained by means of H 2 O/DMF/PAN ternary phase diagram. At higher RH, the water diffusion into polymer-solution jet brings thermodynamic instability into the system leading to separation of polymer-rich phase and polymer-lean phase, where the later contributes to porosity. Higher process temperature (40 °C) yields larger miscibility area in the ternary phase diagram leading to formation of porous structure at relatively higher RH (40%). Tensile strength of nanofibrous yarns is found to vary from 80 MPa to 130 MPa depending on the processing temperature and RH. The amount of porosity is found to affect the tensile properties of nanofibers most significantly, although diameter and crystallinity play important role. Annealing is found to alleviate surface roughness and porosity and increase crystallinity. Furthermore, tensile strength of nanofibrous yarns is found to improve by up to 25% after annealing.

36 MATERIALS SCIENCE↗

Effect of Rolling Deformation on the Microstructure and Mechanical Properties of an Extruded Mg-Zn-Ca Alloy

The microstructure and mechanical properties of an as-extruded Mg-4.5Zn-1.1Ca (wt.%) alloy subjected to unidirectional rolling and cross-rolling were compared in the present study. The results indicated that rolling deformation refined the microstructure, dispersed second phases and modified the texture, which resulted in an improvement in the mechanical properties of the as-rolled alloys compared with those of the as-extruded alloy. The yield strength of the Mg-4.5Zn-1.1Ca (wt.%) alloy increased from 173 to 297 MPa after unidirectional rolling. The initial fragmented Ca{sub 2}Mg{sub 6}Zn{sub 3} phases were further refined after rolling deformation, which clearly restricted the grain growth and gave rise to a fine microstructure. It was also found that rolling deformation intensified the basal texture in comparison with the as-extruded alloy, which was related to particle pinning.

36 MATERIALS SCIENCE↗

Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel

The effect of heat treatment on microstructure and mechanical properties (microhardness, wear resistance and impact toughness) of laser additively manufactured AISI H13 tool steel was systemically investigated. To understand the variation of microstructure and mechanical properties under different heat treatments, the as-deposited samples were treated at 350, 450, 550, 600 and 650 °C/2 h, respectively. Microstructure and phase transformation were investigated through optical microscopy, scanning electron microscope and transmission electron microscope. The mechanical properties were characterized by nanoindentation tests, Charpy tests and high-temperature wear tests. The microstructure of as-deposited samples consisted of martensite, ultrafine carbides and retained austenite. After the tempering treatment, the martensite was converted into tempered martensite and some fine alloy carbides which precipitated in the matrix. When treated at 550 °C, the greatest hardness and nanohardness were 600 HV{sub 0.3} and 6119.4 MPa due to many needle-like carbides precipitation. The value of hardness increased firstly and then decreased when increasing the temperature. When tempered temperatures exceeded 550 °C, the carbides became coarse, and martensitic matrix recrystallized at the temperature of 650 °C. The least impact energy was 6.0 J at a temperature of 550 °C. Samples tempered at 550 °C had larger wear volume loss than that of others. Wear resistances of all samples under atmospheric condition at 400 °C showed an oxidation mechanism.

36 MATERIALS SCIENCE↗

Role of structure imperfection in the formation of the magnetotransport properties of rare-earth manganites with a perovskite structure

The structure, the structure imperfection, and the magnetoresistance, magnetotransport, and microstructure properties of rare-earth perovskite La{sub 0.3}Ln{sub 0.3}Sr{sub 0.3}Mn{sub 1.1}O{sub 3–δ} manganites are studied by X-ray diffraction, thermogravimetry, electrical resistivity measurement, magnetic, {sup 55}Mn NMR, magnetoresistance measurement, and scanning electron microscopy. It is found that the structure imperfection increases, and the symmetry of a rhombohedrally distorted R3̅c perovskite structure changes into its pseudocubic type during isovalent substitution for Ln = La{sup 3+}, Pr{sup 3+}, Nd{sup 3+}, Sm{sup 3+}, or Eu{sup 3+} when the ionic radius of an A cation decreases. Defect molar formulas are determined for a real perovskite structure, which contains anion and cation vacancies. The decrease in the temperatures of the metal–semiconductor (T{sub ms}) and ferromagnet–paramagnet (T{sub C}) phase transitions and the increase in electrical resistivity ρ and activation energy E{sub a} with increasing serial number of Ln are caused by an increase in the concentration of vacancy point defects, which weaken the double exchange 3d{sup 4}(Mn{sup 3+})–2p{sup 6}(O{sup 2–})–3d{sup 3}(Mn{sup 4+})–V{sup (a)}–3d{sup 4}(Mn{sup 3+}). The crystal structure of the compositions with Ln = La contains nanostructured planar clusters, which induce an anomalous magnetic hysteresis at T = 77 K. Broad and asymmetric {sup 55}Mn NMR spectra support the high-frequency electronic double exchange Mn{sup 3+}(3d{sup 4}) ↔ O{sup 2–}(2p{sup 6}) ↔ Mn{sup 4+}(3d{sup 3}) and indicate a heterogeneous surrounding of manganese by other ions and vacancies. A correlation is revealed between the tunneling magnetoresistance effect and the crystallite size. A composition–structure imperfection–property experimental phase diagram is plotted. This diagram supports the conclusion about a strong influence of structure imperfection on the formation of the magnetic, magnetotransport, and magnetoresistance properties of rare-earth perovskite manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling Long-term Creep Performance for Welded Nickel-base Superalloy Structures for Power Generation Systems

The goal of this project is to model long-term creep performance for nickel-base superalloy weldments in high temperature power generation systems. The project uses physics-based modeling methodologies and algorithms for predicting alloy properties in heterogeneous material structures. The modeling methodology will be demonstrated on a gas turbine combustor liner weldment of Haynes 282 precipitate-strengthened nickel-base superalloy. The major developments are: (1) microstructure-property relationships under creep conditions and microstructure characterization (2) modeling inhomogeneous microstructure in superalloy weld (3) modeling mesoscale plastic deformation in superalloy weld and (4) a constitutive creep model that accounts for weld and base metal microstructure and their long term evolution. The developed modeling technology is aimed to provide a more efficient and accurate assessment of a material’s long-term performance compared with current testing and extrapolation methods. This modeling technology will also accelerate development and qualification of new materials in advanced power generation systems. This document is a final technical report for the project, covering efforts conducted from October 2014 to December 2016.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Correlation of Microstructure and Mechanical Properties of Metal Big Area Additive Manufacturing

Metal Big Area Additive Manufacturing (MBAAM) is a novel wire-arc additive manufacturing method that uses a correction-based approach developed at the Oak Ridge National Laboratory (ORNL). This approach is an integrated software method that minimizes the dynamic nature of welding and compensates for build height. The MBAAM process is used to fabricate simple geometry thin walled specimens, using a C-Mn steel weld wire, to investigate the scatter in mechanical properties and correlate them to the underlying microstructure. The uni-axial tensile tests show isotropic tensile and yield properties with respect to building directions, although some scatter in elongation is observed. Large scatter is observed in the Charpy Impact tests. The microstructure characterization reveals mostly homogenous ferrite grains with some pearlite, except for some changes in morphology and grain size at the interface between the build and the base plate. The measured properties and microstructure are compared with the toughness and strength values reported in the literature, and a hypothesis is developed to rationalize the differences. Overall, the MBAAM process creates stable, isotropic, and weld-like mechanical properties in the deposit, while achieving a precise geometry obtained through a real-time feedback sensing, closed loop control system.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of As-Cast γ-TiAl Alloys with Different Cooling Rates

γ-TiAl alloys composed of Ti-45Al-5Nb-1W-1B (at.%) solidified at three different cooling rates by vacuum electromagnetic induction melting under a controlled degree of vacuum of under 2 Pa. The influence of the cooling rate on the microstructure and mechanical properties of the γ-TiAl alloy samples was investigated. A relatively large temperature gradient at the beginning of solidification led to a thin fine-grained layer around the graphite mold, and undercooling had two main effects: (a) promoting nucleation in the grain-refining surface layer and (b) promoting the growth of columnar crystals beneath the surface. Moreover, all prepared ingots of this alloy could be clearly divided into Regions S, M and C from the surface to the core. The colony size of Region M was larger than those of the other two regions due to composition segregation and the growth of columnar grains. The existence of tungsten led to micro-inhomogeneity, and the mechanical properties of the alloy changed according to concentration fluctuations. The degrees of homogeneity were expressed as H{sub 0.1} and H{sub 0.2}. The alloy with the highest values, which possesses the best mechanical properties, solidified at a relatively low cooling rate. The deformation mechanism is also discussed.

36 MATERIALS SCIENCE↗