Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Michigan”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Soil phosphorus drawdown by perennial bioenergy cropping systems in the Midwestern US

Abstract Without fertilization, harvest of perennial bioenergy cropping systems diminishes soil nutrient stocks, yet the time course of nutrient drawdown has not often been investigated. We analyzed phosphorus (P) inputs (fertilization and atmospheric deposition) and outputs (harvest and leaching losses) over 7 years in three representative biomass crops—switchgrass ( Panicum virgatum L.), miscanthus ( Miscanthus × giganteus ) and hybrid poplar trees ( Populus nigra × P. maximowiczii )—as well as in no‐till corn (maize; Zea mays L.) for comparison, all planted on former cropland in SW Michigan, USA. Only corn received P fertilizer. Corn (grain and stover), switchgrass, and miscanthus were harvested annually, while poplar was harvested after 6 years. Soil test P (STP; Bray‐1 method) was measured in the upper 25 cm of soil annually. Harvest P removal was calculated from tissue P concentration and harvest yield (or annual woody biomass accrual in poplar). Leaching was estimated as total dissolved P concentration in soil solutions sampled beneath the rooting depth (1.25 m), combined with hydrological modeling. Fertilization and harvest were by far the dominant P budget terms for corn, and harvest P removal dominated the P budgets in switchgrass, miscanthus, and poplar, while atmospheric deposition and leaching losses were comparatively insignificant. Because of significant P removal by harvest, the P balances of switchgrass, miscanthus, and poplar were negative and corresponded with decreasing STP, whereas P fertilization compensated for the harvest P removal in corn, resulting in a positive P balance. Results indicate that perennial crop harvest without P fertilization removed legacy P from soils, and continued harvest will soon draw P down to limiting levels, even in soils once heavily P‐fertilized. Widespread cultivation of bioenergy crops may, therefore, alter P balances in agricultural landscapes, eventually requiring P fertilization, which could be supplied by P recovery from harvested biomass.

09 BIOMASS FUELS↗
DOE OSTI2023

Climate cooling benefits of cellulosic bioenergy crops from elevated albedo

Abstract Changes in land surface albedo can alter ecosystem energy balance and potentially influence climate. We examined the albedo of six bioenergy cropping systems in southwest Michigan USA: monocultures of energy sorghum ( Sorghum bicolor ), switchgrass ( Panicum virgatum L.), and giant miscanthus ( Miscanthus × giganteus) , and polycultures of native grasses, early successional vegetation, and restored prairie. Direct field measurements of surface albedo ( α s ) from May 2018 through December 2020 at half‐hourly intervals in each system quantified the magnitudes and seasonal differences in albedo (∆ α ) and albedo‐induced radiative forcing (RF ∆ α ). We used a nearby forest as a historical native cover type to estimate reference albedo and RF ∆ α change upon original land use conversion, and a continuous no‐till maize ( Zea mays L .) system as a contemporary reference to estimate change upon conversion from annual row crops. Annually, α s differed significantly ( p < 0.05) among crops in the order: early successional (0.288 ± 0.012SE) >> miscanthus (0.271 ± 0.009) ≈ energy sorghum (0.270 ± 0.010) ≥ switchgrass (0.265 ± 0.009) ≈ restored prairie (0.264 ± 0.012) > native grasses (0.259 ± 0.010) > maize (0.247 ± 0.010). Reference forest had the lowest annual α s (0.134 ± 0.003). Albedo differences among crops during the growing season were also statistically significant, with growing season α s in perennial crops and energy sorghum on average ~20% higher (0.206 ± 0.003) than in no‐till maize (0.184 ± 0.002). Average non‐growing season (NGS) α s (0.370 ± 0.020) was much higher than growing season α s (0.203 ± 0.003) but these NGS differences were not significant. Overall, the original conversion of reference forest and maize landscapes to perennials provided a cooling effect on the local climate (RF αMAIZE : −3.83 ± 1.00 W m −2 ; RF αFOREST : −16.75 ± 3.01 W m −2 ). Significant differences among cropping systems suggest an additional management intervention for maximizing the positive climate benefit of bioenergy crops, with cellulosic crops on average ~9.1% more reflective than no‐till maize, which itself was about twice as reflective as the reference forest.

Lei, Cheyenne↗
DOE OSTI2024

High temperatures and low soil moisture synergistically reduce switchgrass yields from marginal field sites and inhibit fermentation

‘Marginal lands’ are low productivity sites abandoned from agriculture for reasons such as low or high soil water content, challenging topography, or nutrient deficiency. To avoid competition with crop production, cellulosic bioenergy crops have been proposed for cultivation on marginal lands, however on these sites they may be more strongly affected by environmental stresses such as low soil water content. In this study we used rainout shelters to induce low soil moisture on marginal lands and determine the effect of soil water stress on switchgrass growth and the subsequent production of bioethanol. Five marginal land sites that span a latitudinal gradient in Michigan and Wisconsin were planted to switchgrass in 2013 and during the 2018–2021 growing seasons were exposed to reduced precipitation under rainout shelters in comparison to ambient precipitation. The effect of reduced precipitation was related to the environmental conditions at each site and biofuel production metrics (switchgrass biomass yields and composition and ethanol production). During the first year (2018), the rainout shelters were designed with 60% rain exclusion, which did not affect biomass yields compared to ambient conditions at any of the field sites, but decreased switchgrass fermentability at the Wisconsin Central–Hancock site. In subsequent years, the shelters were redesigned to fully exclude rainfall, which led to reduced biomass yields and inhibited fermentation for three sites. When switchgrass was grown in soils with large reductions in moisture and increases in temperature, the potential for biofuel production was significantly reduced, exposing some of the challenges associated with producing biofuels from lignocellulosic biomass grown under drought conditions.

09 BIOMASS FUELS↗
DOE OSTI2024

Uncertainties in greenhouse gas emission factors: A comprehensive analysis of switchgrass‐based biofuel production

Abstract This study investigates uncertainties in greenhouse gas (GHG) emission factors related to switchgrass‐based biofuel production in Michigan. Using three life cycle assessment (LCA) databases—US lifecycle inventory (USLCI) database, GREET, and Ecoinvent—each with multiple versions, we recalculated the global warming intensity (GWI) and GHG mitigation potential in a static calculation. Employing Monte Carlo simulations along with local and global sensitivity analyses, we assess uncertainties and pinpoint key parameters influencing GWI. The convergence of results across our previous study, static calculations, and Monte Carlo simulations enhances the credibility of estimated GWI values. Static calculations, validated by Monte Carlo simulations, offer reasonable central tendencies, providing a robust foundation for policy considerations. However, the wider range observed in Monte Carlo simulations underscores the importance of potential variations and uncertainties in real‐world applications. Sensitivity analyses identify biofuel yield, GHG emissions of electricity, and soil organic carbon (SOC) change as pivotal parameters influencing GWI. Decreasing uncertainties in GWI may be achieved by making greater efforts to acquire more precise data on these parameters. Our study emphasizes the significance of considering diverse GHG factors and databases in GWI assessments and stresses the need for accurate electricity fuel mixes, crucial information for refining GWI assessments and informing strategies for sustainable biofuel production.

Kim, Seungdo↗
DOE OSTI2020

Synergistic Flow-Induced Oscillation of Multiple Cylinders in Harvesting Marine Hydrokinetic Energy

Abstract Flow-induced oscillations/vibrations (FIO/V) of cylinders in tandem can be enhanced by proper in-flow spacing to increase hydrokinetic energy harnessing. In a farm of multiple cylinders in tandem, the effect of interference on harnessing efficiency arises. Three years of systematic experiments in the Marine Renewable Laboratory (MRELab) of the University of Michigan, on an isolated cylinder, and two and three cylinders in tandem have revealed that synergistic FIO can enhance oscillations of cylinders in close proximity. Two cylinders in tandem can harness 2.5–13.5 times the hydrokinetic power of one isolated cylinder. Three cylinders in tandem can harness 3.4–26.4 times the hydrokinetic power of one isolated cylinder. Negative impact on the harnessed energy by multiple cylinders, such as the shielding effect for the downstream cylinder/s, is possible. Specifically for the three-cylinder configuration, at a certain flow speed, the decrease in the power of the middle cylinder can be overcome by adjusting its stiffness and/or damping.

Engineering↗
DOE OSTI2022

Use of Mini-CT Specimens for Fracture Toughness Characterization of Irradiated Highly Embrittled Weld

In the 1990’s, the Heavy Section Steel Irradiation Program at the ORNL performed investigation of the shape of the fracture toughness master curve for reactor pressure vessel steel highly embrittled because of irradiation exposure. A radiation-sensitive reactor pressure vessel (RPV) weld with intentionally enhanced copper content, designated KS-01, has been characterized in terms of static initiation (KJc) and Charpy impact toughness in the unirradiated and irradiated conditions. The objective of this original project was to investigate the ability of highly embrittled material to maintain the shape of the unirradiated transition fracture toughness curve, as well as to examine the ability of the Charpy 41-J shift to predict the fracture toughness shift at such high level of embrittlement. Irradiation of this weld was performed at the University of Michigan Ford Reactor in the new HSSI irradiation-anneal-reirradiation (IAR) facility. Broken specimens from that project have been saved in ORNL storage. To verify applicability of Mini-CT specimens for fracture toughness characterization of RPV materials as part of the DOE Light Water Reactor Sustainability Program, Mini-CT specimens were machined from broken Charpy specimens and tested according to ASTM E1921 standard. As result of this study, the fracture toughness of this weld derived by testing Mini-CT specimens in the unirradiated and irradiated conditions is compared to previously reported fracture toughness derived by large number of conventional specimens.

Sokolov, Mikhail A.↗
DOE OSTI2020

Dedicated short range communications used as fail-safe in autonomous navigation

Here in this paper, we have analyzed scenarios for leader-follower vehicle convoys that have the potential to be unsafe, hazardous, or even fatal in order to provide insight on dangerous driving conditions for autonomous vehicle platoons. These scenarios were created in a simulation software called Prescan, and are made to reflect the behavior of the vehicle dynamics and sensor characteristics of a real-world vehicle convoy that is currently being tested at the American Center for Mobility (ACM) and sponsored by the Department of Energy (DOE), National Renewable Energy Laboratory (NREL), the U.S. Army Combat Capabilities Development Command - Ground Vehicle Systems Center (U.S. Army CC-DEVCOM) and the Michigan Department of Transportation (MDOT). The follower vehicle in this study is tested under multiple scenarios, equipped with a Dedicated Short Range vehicle-to-vehicle communication system (DSRC), a radar-based adaptive cruise control system (ACC) and a precision global positioning system (GPS).

42 ENGINEERING↗
DOE OSTI2024

An exopolysaccharide pathway from a freshwater Sphingomonas isolate

Bacteria embellish their cell envelopes with a variety of specialized polysaccharides. Biosynthesis pathways for these glycans are complex, and final products vary greatly in their chemical structures, physical properties, and biological activities. This tremendous diversity comes from the ability to arrange complex pools of monosaccharide building blocks into polymers with many possible linkage configurations. Due to the complex chemistry of bacterial glycans, very few biosynthetic pathways have been defined in detail. As part of an initiative to characterize novel polysaccharide biosynthesis enzymes, we isolated a bacterium from Lake Michigan called Sphingomonas sp. LM7 that is proficient in exopolysaccharide (EPS) production. We identified genes that contribute to EPS biosynthesis in LM7 by screening a transposon mutant library for colonies displaying altered colony morphology. A gene cluster was identified that appears to encode a complete wzy/wzx-dependent polysaccharide assembly pathway. Deleting individual genes in this cluster caused a non-mucoid phenotype and a corresponding loss of EPS secretion, confirming the role of this gene cluster in polysaccharide production. We extracted EPS from LM7 cultures and determined that it contains a linear chain of 3- and 4-linked glucose, galactose, and glucuronic acid residues. Finally, we show that the EPS pathway in Sphingomonas sp. LM7 diverges from that of sphingan-family EPSs and adhesive polysaccharides such as the holdfast that are present in other Alphaproteobacteria. Our approach of characterizing complete biosynthetic pathways holds promise for engineering polysaccharides with valuable properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Soil Origin and Plant Genotype Modulate Switchgrass Aboveground Productivity and Root Microbiome Assembly

Switchgrass (Panicum virgatum) is a model perennial grass for bioenergy production that can be productive in agricultural lands that are not suitable for food production. There is growing interest in whether its associated microbiome may be adaptive in low- or no-input cultivation systems. However, the relative impact of plant genotype and soil factors on plant microbiome and biomass are a challenge to decouple. To address this, a common garden greenhouse experiment was carried out using six common switchgrass genotypes, which were each grown in four different marginal soils collected from long-term bioenergy research sites in Michigan and Wisconsin. We characterized the fungal and bacterial root communities with high-throughput amplicon sequencing of the ITS and 16S rDNA markers, and collected phenological plant traits during plant growth, as well as soil chemical traits. At harvest, we measured the total plant aerial dry biomass. Significant differences in richness and Shannon diversity across soils but not between plant genotypes were found. Generalized linear models showed an interaction between soil and genotype for fungal richness but not for bacterial richness. Community structure was also strongly shaped by soil origin and soil origin × plant genotype interactions. Overall, plant genotype effects were significant but low. Random Forest models indicate that important factors impacting switchgrass biomass included NO 3 – , Ca 2+ , PO 4 3– , and microbial biodiversity. We identified 54 fungal and 52 bacterial predictors of plant aerial biomass, which included several operational taxonomic units belonging to Glomeraceae and Rhizobiaceae, fungal and bacterial lineages that are involved in provisioning nutrients to plants.

plant biomass↗
DOE OSTI2023

Genome-sequenced bacterial collection from sorghum epicuticular wax

ABSTRACT A collection of 44 isolates isolated from the epicuticular wax of stems of energy sorghum is available at the Great Lakes Bioenergy Researcher Center, Michigan State University, MI, USA. We enriched bacteria with putative plant-beneficial phenotypes and include information on their phenotypic diversity, taxonomy, and whole-genome sequences.

Mechan-Llontop, Marco E.↗
DOE OSTI2024

Bacterial isolate collection from switchgrass rhizosphere

ABSTRACT We provide a collection of 78 bacterial isolates from the rhizosphere of switchgrass ( Panicum virgatum L .) at the Lux Arbor Reserve in Delton, MI, a site of the Great Lakes Bioenergy Research Center (GLBRC), Michigan State University, MI, USA. We include information on isolation conditions and full-length 16S rRNA sequences.

Grady, Keara L.↗
DOE OSTI2023

Nonparametric Inference for the Reproductive Rate in Generalized Compartmental Models

We develop a tractable nonparametric model for the time-varying reproductive rate of infectious diseases that combines the structure of a deterministic compartmental model and a stochastic model for incidence data. We use Bayesian inference to estimate, with uncertainty, the reproductive rate of the Coronavirus 2019 outbreak in the U.S. states of California, Florida, Michigan, New Mexico, New York, and Texas from January 2020 to March 2022. Employing the inferred reproductive rates, we estimate the posterior distribution of the time-varying reproduction numbers for each state. Compering the time-varying reproduction numbers across the states, we identify some epidemic waves, potentially driven from changes in human behavior and virus mutations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

RF deflecting cavity for fast radioactive ion beams

Abstract The Facility for Rare Isotope Beams (FRIB) will be a new scientific user facility that produces rare-isotope beams for experiments from the fragmentation of heavy ions at energies of 100–200 MeV/u. During the projectile fragmentation, the rare isotope of interest is produced along with many contaminants that need to be removed before the beam reaches detectors. At FRIB, this is accomplished with a magnetic projectile fragment separator. However, to achieve higher beam purity, in particular for proton-rich rare isotopes, additional purification is necessary. RadiaBeam in collaboration with Michigan State University (MSU) has designed a 20.125 MHz radiofrequency (RF) fragment separator capable of producing a 4 MV kick with 18 cm aperture in order to remove contaminant isotopes based on their time of flight. In this paper, we will discuss the RF and engineering design considerations of this separator cavity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Accelerator commissioning and rare isotope identification at the Facility for Rare Isotope Beams

In 2008, Michigan State University was selected to establish the Facility for Rare Isotope Beams (FRIB). Construction of the FRIB accelerator was completed in January 2022. Phased accelerator commissioning with heavy ion beams started in 2017 with the normal-conducting ion source and radio-frequency quadrupole. In April 2021, the full FRIB driver linear accelerator (linac) was commissioned, with heavy ion beams accelerated to energies above 200 MeV/nucleon by 324 superconducting radiofrequency (SRF) resonators operating at 2 K and 4 K with liquid-helium cooling. Further, in preparation for high-power operation, a liquid lithium charge stripper was commissioned with heavy ion beams up to uranium-238, followed by the simultaneous acceleration of multiple-charge-state heavy ion beams to energies above 200 MeV/nucleon. In December 2021, selenium-84 was produced with the FRIB target using a krypton-86 primary beam, demonstrating FRIB’s capability for scientific discovery.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Budget Constrained Machine Learning for Early Prediction of Adverse Outcomes for COVID-19 Patients

Background: Machine learning (ML) based risk stratification models of Electronic Health records (EHR) data may help to optimize treatment of COVID-19 patients, but are often limited by their lack of clinical interpretability and cost of laboratory tests. We develop a ML based tool for predicting adverse outcomes based on EHR data to optimize clinical utility under a given cost structure. This cohort study was performed using deidentified EHR data from COVID-19 patients from ProMedica Healthcare in northwest Ohio and southeastern Michigan. Methods: We tested performance of various ML approaches for predicting either increasing ventilatory support or mortality and the set of model features under a budget constraint was optimized via exhaustive search across all combinations of features. Results: The optimal sets of features for predicting ventilation under any budget constraint included demographics and comorbidities (DCM), basic metabolic panel (BMP), D-dimer, lactate dehydrogenase (LDH), erythrocyte sedimentation rate (ESR), CRP, brain natriuretic peptide (BNP), and procalcitonin and for mortality included DCM, BMP, complete blood count, D-dimer, LDH, CRP, BNP, procalcitonin and ferritin. Conclusions: This study presents a quick, accurate and cost-effective method to evaluate risk of deterioration for patients with SARS-CoV-2 infection at the time of clinical evaluation.

Cadena Pico, JoseE.↗
DOE OSTI2025

pnnl/Lagrangian-Droplets

The Lagrangian Droplet cloud microphysics scheme uses high-resolution data of air velocity, temperature, and water vapor mixing ratio to drive particle-based simulations of cloud microphysics. The model was first implemented using a high-resolution Large Eddy Simulation of the Pi Chamber at Michigan Tech, which is small-scale convection chamber the generates clouds in a laboratory setting

Fierce, Laura [Pacific Northwest National Laborato↗
DOE OSTI2024

Discovery of Nuclides Project

The Discovery of Nuclides project compiles detailed discovery information for all naturally occurring and artificially produced nuclides. The short abstracts for each nuclide include the authors, institution, country, year, method of discovery, and reference. The database contains over 3300 nuclides and is continuously updated as new nuclides are discovered. The work is performed at the Facility for Rare Isotope Beams (FRIB) and is supported by the U.S. Department of Energy, Office of Nuclear Physics under Grant No. DE-SC0016948 and Michigan State University. The FRIB Nuclear Data group is responsible for coordinating and updating the database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗