Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mars data sets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

A simple model of clastic sediments on Mars

In preparation for the start of Mars Observer operations at Mars later this year, Viking Infrared Thermal Mapper (IRTM) observations were synthesized into a simple but geologically coherent conceptual model for use in establishing targets for coordinated Thermal Emission Spectrometer (TES) and Mars Observer Camera (MOC) observations. The model is based on three assumptions that are, at best, only partly true: that albedo is a measure of the presence or absence of dust; that thermal inertia is a measure of the weighted average particle size; and that rock abundance is a measure of the statistical thickness of fine sediment (i.e., that the observed areal abundance of rock reflects the whole or partial burial of rocks). Using this model, it is possible to show that, on the scale of 30 km, mantles of wind-transportable sediment (dust and sand) are at most about 1 m thick, and that on a global average such mantles are about 35 cm thick. It is shown that 3.8 x 10(exp 19) cu cm of such sediment covers Mars equatorward of +/- 60 deg latitude. Using the model, interpretation of digital maps of IRTM data focus attention not only on areas where dust is the primary sediment (e.g., Arabia Terra), but also on areas where sand is the primary sediment (e.g., eastern Valles Marineris) and where rocks and other coarse materials are abundant (e.g., eastern Kasei Vallis). Three IRTM data sets are used in the analysis: Viking 1 and 2 pre-dawn observations mosaiced into a global map of single-point thermal inertias at 0.5 deg/bin resolution; Pleskot and Miner's global albedo map using the best available, clear-period IRTM observations (1x/bin); and Christensen's 1 deg/bin rock abundance map. Uncertainty analyses indicate these data sets to be accurate to 5 percent, 2 percent, and 20 percent, respectively.

Christensen, Philip R.↗

Improvements in Electron-Probe Microanalysis: Applications to Terrestrial, Extraterrestrial, and Space-Grown Materials

Improvement in the accuracy of electron-probe microanalysis (EPMA) has been accomplished by critical assessment of standards, correction algorithms, and mass absorption coefficient data sets. Experimental measurement of relative x-ray intensities at multiple accelerating potential highlights errors in the absorption coefficient. The factor method has been applied to the evaluation of systematic errors in the analysis of semiconductor and silicate minds. Accurate EPMA of Martian soil stimulant is necessary in studies that build on Martian rover data in anticipation of missions to Mars.

Carpenter, Paul↗

Intensity-based rock detection for acquiring onboard rover science

Missions to Mars already under study call for very long autonomous traverses (on the order of hundreds of meters per sol) during which there will be limited contact with Earth. The onboard Autonomous Science Investigation System (OASIS) is a technology for increasing science return during rover traverses by prioritizing science opportunities. By prioritizing data for downlink onboard, it is expected that the set of images selected for downlink by OASIS will have a consistently higher scientific interest then any set of equal number of images of the same traverse obtained using random or periodic sampling. Thus, OASIS can be used to increase the science returned from a long traverse. OASIS prioritizes data and identifies science opportunities by extracting information from image data and then using this information to prioritize the data and identify potential new science opportunities. Currently, the information extracted from the images is the location of the rocks in the image and several properties of these rocks such as size, albedo, texture and shape, In this paper we give an overview of the role of rock detection in the OASIS system and describe the functionality of the rock detector. We then present results on representative images

Judd, Michele↗

MARCUS ARM CN and CCN data reprocessed to remove ship exhaust influence

The data presented in this collection are the cloud condensation nuclei (CCN) and condensation nuclei (CN) from the MARCUS (Measurements of Aerosols, Radiation and CloUds over the Southern Oceans) campaign. This campaign involved the deployment of the ARM Mobile Facility aboard the RSV Aurora Australis between October 2017 and March 2018 during its summer season resupplying Australia’s Antarctic research stations from its port in Hobart, Australia. Routine processing undertaken by ARM does not remove platform exhaust associated with its deployment aboard ships. Consequently, the raw data were obtained and manually filtered to remove the influence of platform exhaust on the measurements by reviewing CCN, CN and BC data simultaneously and flagging all affected periods. Remaining data were then quality controlled for when instrument parameters were out of specification. CCN data are split into different streams for supersaturation settings before statistics for each hour being calculated. All data files contain NaN values for periods when data was removed for QC or exhaust reasons. Original raw data available at: Kulkarni, G. R., Flynn, C. and Koontz, A.: Atmospheric Radiation Measurement (ARM) user facility. 2017, updated hourly. Cloud Condensation Nuclei Particle Counter (AOSCCN100). 2017-10-29 to 2018-03-24, ARM Mobile Facility (MAR) Hobart, AUS to Antarctic Coast - resupply ship Aurora Australis; AMF2 (M1)., Atmospheric Radiation Measurement (ARM) user facility Data Center: Oak Ridge, Tennessee, USA [online] Available from: http://dx.doi.org/10.5439/1227964 (Accessed 9 November 2018), 2018. Kuang, C., Salwen, C., Boyer, M. and Singh, A.: Atmospheric Radiation Measurement (ARM) user facility. 2017, updated hourly. Condensation Particle Counter (AOSCPCF). 2017-10-29 to 2018-03-26, ARM Mobile Facility (MAR) Hobart, AUS to Antarctic Coast - resupply ship Aurora Australis; AMF2 (M1)., Atmospheric Radiation Measurement (ARM) user facility Data Center: Oak Ridge, Tennessee, USA [online] Available from: http://dx.doi.org/10.5439/1046184 (Accessed 9 November 2018), 2018.

54 ENVIRONMENTAL SCIENCES↗

Planetary geodesy

The results of investigations of the geodesy of the planets and their satellites conducted during the period 1975 - 1978 are surveyed. Analysis of the photographic data of Mercury taken by Mariner 10 have revealed the mass, oblateness, radius rotation period and density of the panet, and allowed the high-resolution mapping of the surface. Earth-based radar imagery has permitted the identification of large-scale topographic features on Venus. Knowledge of the gravitational field of Mars has been improved by Mariner 9 and Viking tracking data, and the global topography and geometric figure of Mars have been derived. Doppler and ranging tracking data from the Viking landers have provided data for the precise determination of Martian rotational dynamics and the topographic features and figures of Phobos and Deimos have been observed. Pioneer 10 and 11 data have yielded information on the mass, gravitational field and dynamic parameters of Jupiter. Discoveries of a satellite of Pluto and a set of rings around Uranus have been made, the rotation of Uranus and Neptune have been measured, and the geodetic properties of the rings and satellites of Saturn have been investigated. Future developments in planetary geodesy are expected from continued Viking data and the Pioneer Venus probe and Voyager probes to Jupiter and Saturn.

Michael, W. H., Jr.↗

The Imager for Mars Pathfinder Insurance Pan

The Imager for Mars Pathfinder (IMP) obtained a full panorama of the Sagan Memorial Station landing site on Sol 2, before the IMP mast was deployed. The images in this panorama were taken in 4 filters (including stereo) and losslessly compressed to provide a high-quality multispectral survey of the landing site even if the IMP mast did not successfully deploy; this data set was therefore called the Insurance Pan. It was completed late in the afternoon of Sol 2, just before the IMP mast was (successfully) deployed. The data were stored in memory and returned to Earth after it became clear that downlink rates were higher than expected. The Insurance Pan horizontal (azimuth) coverage is nearly complete, with gaps caused by pointing errors and data packet losses. Stereo data were acquired in the blue (445 nm) filter, as well as right-eye green (531 nm), orange (600 nm), and near-infrared (752 nm) data.

K E Herkenhoff↗

Detecting Organic Compounds Released from Iron Oxidizing Bacteria using Sample Analysis at Mars (SAM) Like Instrument Protocols

Mars is a planet of great interest for Astrobiology since its past environmental conditions are thought to have been favourable for the emergence life. At present, the Red Planet is extremely cold and dry and the surface is exposed to intense UV and ionizing radiation, conditions generally considered to be incompatible with life as we know it on Earth. It was proposed that the shallow subsurface of Mars, where temperatures can be above freezing and liquid water can exist on rock surfaces, could harbor chemolithoautotrophic bacteria such as the iron oxidizing microorganism Pseudomonas sp. HerB. The Mars Science Laboratory (MSL) mission will provide the next opportunity to carry out in situ measurements for organic compounds of possible biological origin on Mars. One instrument onboard MSL, called the Sample Analysis at Mars (SAM) instrument suite, will carry out a broad and sensitive search for organic compounds in surface samples using either high temperature pyrolysis or chemical extraction followed by gas chromatography mass spectrometry. We present gas chromatograph mass spectrometer (GC/MS) data on crushed olivine rock powders that have been inoculated with Pseudomonas sp. HerB at different concentrations ranging from approx 10(exp 2) to 10(exp 7) cells per gram. The inoculated olivine samples were heated under helium carrier gas flow at 500 C and the pyrolysis products concentrated using a SAM-like hydrocarbon trap set at -20 C followed by trap heating and analysis by GC/Ms. In addition, the samples were also extracted using a low temperature "one-pot" chemical extraction technique using N-methyl, N-(tert-butyldimethylsilyl) trifluoroacetamide (MTBSTFA) as the silylating agent prior to GC/MS analysis. We identified several aldehydes, thiols, and alkene nitriles after pyrolysis GC/MS analysis of the bacteria that were not found in the olivine control samples that had not been inoculated with bacteria. The distribution of pyrolysis products extracted from the bacteria was clearly distinct from similar GC/MS analyses of the carbonaceous meteorite Murchison that was dominated by sulfur containing aromatic compounds. A similar comparison, if organic compounds are detected by SAM on Mars, could be useful to help discriminate between meteoritic or biological origins.

Glavin, D. P.↗

Summer mean and extreme precipitation over the Mid-Atlantic region: climatological characteristics and contributions from different precipitation types

Based on a long-term observational dataset from the tracking of mesoscale convective systems (MCSs), isolated deep convection (IDC), and tropical cyclones (TCs), we examine the climatological characteristics of summer mean and extreme precipitation during 2004 – 2017 and their respective contributions from MCS, IDC, TC, and non-convective (NC) systems and the local vs. remote influence of MCS and IDC over the MAR. On average, MCS, IDC, TC, and NC contribute 22%, 29%, 4%, and 45% to the total summer mean precipitation in the region. While MCS and TC precipitation primarily occurs in the coastal areas east of the Appalachian Mountains, IDC precipitation is more concentrated in the southern MAR and near the mountain windward slopes. Each summer, ~41 MCSs with an average lifetime of 19.6 hours influence the MAR, with 80% initiated outside and traveling on average 10 hours to the region. Around 13 MCSs initiated in the Great Plains and Midwest propagate across the Appalachian Mountains and contribute 20-40% to summer MCS precipitation in the central Mid-Atlantic coastal areas. In contrast, more than 2000 IDCs with an average lifetime of 2.0 hours influence the MAR each summer, and 77% are initiated locally. MCS, IDC, TC, and NC contribute 31% (30%), 26% (31%), 18% (7%), and 26% (32%) to the top 1% (5%) extreme daily precipitation, respectively. Considering extreme hourly precipitation, however, the IDC contributions increase to 41% (top 1%) and 38% (top 5%) due to the shorter duration of IDC events than the other precipitation types.

Li, Jianfeng↗

Communication Bandwidth Considerations for Exploration Medical Care During Space Missions

Destinations beyond low Earth orbit, especially Mars, have several important constraints, including limited resupply, limited to no possibility of medical evacuation, and delayed communication with ground support teams. Therefore, medical care is driven towards greater autonomy and necessitates a medical system that supports this paradigm, including the potential for high medical data transfer rates in order to share medical information and coordinate care with the ground in an intermittent fashion as communication allows. The medical data transfer needs for a Martian exploration mission were estimated by defining two medical scenarios that would require high data rate communications between the spacecraft and Earth. One medical scenario involves a case of hydronephrosis (outflow obstruction of the kidney) that evolves into pyelonephritis (kidney infection), then urosepsis (systemic infection originating from the kidney), due to obstruction by a kidney stone. A second medical scenario involved the death of a crewmember’s child back on Earth that requires behavioral health care. For each of these scenarios, a data communications timeline was created following the medical care described by the scenario. From these timelines, total medical data transfers and burst transmission rates were estimated. Total data transferred from the vehicle-to-ground were estimated to be 94 gigabytes (GB) and 835 GB for the hydronephrosis and behavioral health scenarios, respectively. Data burst rates were estimated to be 7.7 megabytes per second (MB/s) and 15 MB/s for the hydronephrosis and behavioral health scenarios, respectively. Even though any crewed Mars mission should be capable of functioning autonomously, as long as the possibility of communication between Earth and Mars exists, Earth-based subject matter experts will be relied upon to augment mission medical capability. Therefore, setting an upper boundary limit for medical communication rates can help factor medical system needs into total vehicle communication requirements.

Krihak, Michael↗

VLBI Data Processing on Coronal Radio-sounding Experiments of Mars Express

The ESA’s Mars Express solar corona experiments were performed at two solar conjunctions in the years 2015 and 2017 by a number of radio telescopes in the European VLBI Network. This paper presents the methods to measure the frequency and phase fluctuations of the spacecraft radio signal, and the applications to study the characteristics of the plasma turbulence effects on the signal at a single station and at multiple stations via cross correlation. The power spectra of the frequency fluctuations observed between 4.9 and 76.3 R {sub s} have a power-law shape close to a Kolmogorov spectrum over the frequency interval ν {sub lo} < ν < ν {sub up}, where the nominal value of ν {sub lo} is set to 3 mHz and ν {sub up} is in the range of 0.03–0.15 Hz. The rms of the frequency fluctuations is presented as a function of the heliocentric distance. Furthermore, we analyze the variations of the electron column density fluctuations at solar offsets 4.9 R {sub s} and 9.9 R {sub s} and the cross-correlation products between the VLBI stations. The power density of the differential fluctuations between different stations decreases at ν < 0.01 Hz. Finally, the fast flow speeds of solar wind >700 km s{sup -1} are derived from the cross correlation of frequency fluctuations at ν < 0.01 Hz. The fast flow speeds of solar wind correspond to the high heliolatitude of the coronal region that the radio rays passed. The VLBI observations and analysis methods can be used to study the electron column density fluctuations and the turbulence at multiple spatial points in the inner solar wind by providing multiple lines of sight between the Earth and the spacecraft.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal fatigue and oxidation data for directionally solidified MAR-M 246 turbine blades

Thermal fatigue and oxidation data were obtained for 11 plasma spray coated and 13 uncoated directionally solidified and single crystal MAR-M 246 blades. Blade coatings on the airfoil included several metal-oxide thermal barrier layers based on Al2O3, Cr2O3, or ZrO2. The 24 turbine blades were tested simultaneously for 3000 cycles in fluidized beds maintained at 950 and 25 C using a symmetrical 360 set thermal cycle. In 3000 cycles, only uncoated turbine blades exhibited cracking on the trailing edge near the platform; 3 of the 13 uncoated blades did not crack. Cracking occurred over the range 400 to 2750 cycles, with single crystal blades indicating the poorest thermal fatigue resistance. Oxidation of the uncoated blades was limited in 3000 cycles. All coatings indicated microscopically visible spalling at the trailing edge radius after 3000 cycles. Severe general spalling on the airfoil was observed for two multilayered coatings.

Hill, V. L.↗

MaROS: Information Management Service

This software is provided by the Mars Relay Operations Service (MaROS) task to a variety of Mars projects for the purpose of coordinating communications sessions between landed spacecraft assets and orbiting spacecraft assets at Mars. The Information Management Service centralizes a set of functions previously distributed across multiple spacecraft operations teams, and as such, greatly improves visibility into the end-to-end strategic coordination process. Most of the process revolves around the scheduling of communications sessions between the spacecraft during periods of time when a landed asset on Mars is geometrically visible by an orbiting spacecraft. These relay sessions are used to transfer data both to and from the landed asset via the orbiting asset on behalf of Earth-based spacecraft operators. This software component is an application process running as a Java virtual machine. The component provides all service interfaces via a Representational State Transfer (REST) protocol over https to external clients. There are two general interaction modes with the service: upload and download of data. For data upload, the service must execute logic specific to the upload data type and trigger any applicable calculations including pass delivery latencies and overflight conflicts. For data download, the software must retrieve and correlate requested information and deliver to the requesting client. The provision of this service enables several key advancements over legacy processes and systems. For one, this service represents the first time that end-to-end relay information is correlated into a single shared repository. The software also provides the first multimission latency calculator; previous latency calculations had been performed on a mission-by-mission basis.

Allard, Daniel A.↗

Spacecraft data and relay management using delay tolerant networking

NASA’s demonstration of the successful transmission of relay data through the orbiting Mars Odyssey, Mars Global Surveyor, and Mars Express by the Mars Exploration Rovers has shown not only the benefit of using a relay satellite for multiple landed assets in a deep space environment but also the benefit of international standards for such an architecture. As NASA begins the quest defined in the Vision for Exploration with robotic and manned missions to the Moon, continues its study of Mars, and is joined in these endeavors by countries world-wide, landed assets transmitting data through relay satellites will be crucial for completing mission objectives. However, this method of data delivery will result in increased complexity in routing and prioritization of data transmission as the number of missions increases. Also, there is currently no standard method among organizations conducting such missions to return these data sets to Earth given a complex environment. One possibility for establishing such a standard is for mission designers to deploy protocols which fall under the umbrella of Delay Tolerant Networking (DTN). These developing standards include the Bundle Protocol (BP) which provides a standard, secure, store and forward mechanism designed for high latency and asymmetric communication links and the Licklider Transmission Protocol (LTP) which is used to provide a reliable deep space link transmission service.

Torgerson, J. Leigh↗

Spacecraft Data and Relay Management using Delay Tolerant Networking

NASA's demonstration of the successful transmission of relay data through the orbiting Mars Odyssey, Mars Global Surveyor, and Mars Express by the Mars Exploration Rovers has shown not only the benefit of using a relay satellite for multiple landed assets in a deep space environment but also the benefit of international standards for such architecture. As NASA begins the quest defined in the Vision for Exploration with robotic and manned missions to the Moon, continues its study of Mars, and is joined in these endeavors by countries world-wide, landed assets transmitting data through relay satellites will be crucial for completing mission objectives. However, this method of delivery of data will result in increased complexity in routing and prioritization of data transmission as the number of missions increases. Also, there is currently no standard method among organizations conducting such missions to return these data sets to Earth given a complex environment. One possibility for establishing such a standard is for mission designers to deploy protocols which fall under the umbrella of Delay Tolerant Networking (DTN). These developing standards include the Bundle Protocol (BP) which provides a standard, secure, store and forward mechanism designed for high latency and asymmetric communication links and the Licklider Transmission Protocol (LTP) which is used to provide a reliable deep space link transmission service.

network congestion control algorithm↗

Scheduling Results for the THEMIS Observation Scheduling Tool

We describe a scheduling system intended to assist in the development of instrument data acquisitions for the THEMIS instrument, onboard the Mars Odyssey spacecraft, and compare results from multiple scheduling algorithms. This tool creates observations of both (a) targeted geographical regions of interest and (b) general mapping observations, while respecting spacecraft constraints such as data volume, observation timing, visibility, lighting, season, and science priorities. This tool therefore must address both geometric and state/timing/resource constraints. We describe a tool that maps geometric polygon overlap constraints to set covering constraints using a grid-based approach. These set covering constraints are then incorporated into a greedy optimization scheduling algorithm incorporating operations constraints to generate feasible schedules. The resultant tool generates schedules of hundreds of observations per week out of potential thousands of observations. This tool is currently under evaluation by the THEMIS observation planning team at Arizona State University.

Thermal Emission Imaging System (THEMIS)↗

NASA Tech Briefs, March 2012

The topics include: 1) Spectral Profiler Probe for In Situ Snow Grain Size and Composition Stratigraphy; 2) Portable Fourier Transform Spectroscopy for Analysis of Surface Contamination and Quality Control; 3) In Situ Geochemical Analysis and Age Dating of Rocks Using Laser Ablation-Miniature Mass Spectrometer; 4) Physics Mining of Multi-Source Data Sets; 5) Photogrammetry Tool for Forensic Analysis; 6) Connect Global Positioning System RF Module; 7) Simple Cell Balance Circuit; 8) Miniature EVA Software Defined Radio; 9) Remotely Accessible Testbed for Software Defined Radio Development; 10) System-of-Systems Technology-Portfolio-Analysis Tool; 11) VESGEN Software for Mapping and Quantification of Vascular Regulators; 12) Constructing a Database From Multiple 2D Images for Camera Pose Estimation and Robot Localization; 13) Adaption of G-TAG Software for Validating Touch and Go Asteroid Sample Return Design Methodology; 14) 3D Visualization for Phoenix Mars Lander Science Operations; 15) RxGen General Optical Model Prescription Generator; 16) Carbon Nanotube Bonding Strength Enhancement Using Metal Wicking Process; 17) Multi-Layer Far-Infrared Component Technology; 18) Germanium Lift-Off Masks for Thin Metal Film Patterning; 19) Sealing Materials for Use in Vacuum at High Temperatures; 20) Radiation Shielding System Using a Composite of Carbon Nanotubes Loaded With Electropolymers; 21) Nano Sponges for Drug Delivery and Medicinal Applications; 22) Molecular Technique to Understand Deep Microbial Diversity; 23) Methods and Compositions Based on Culturing Microorganisms in Low Sedimental Fluid Shear Conditions; 24) Secure Peer-to-Peer Networks for Scientific Information Sharing; 25) Multiplexer/Demultiplexer Loading Tool (MDMLT); 26) High-Rate Data-Capture for an Airborne Lidar System; 27) Wavefront Sensing Analysis of Grazing Incidence Optical Systems; 28) Foam-on-Tile Damage Model; 29) Instrument Package Manipulation Through the Generation and Use of an Attenuated-Fluent Gas Fold; 30) Multicolor Detectors for Ultrasensitive Long-Wave Imaging Cameras; 31) Lunar Reconnaissance Orbiter (LRO) Command and Data Handling Flight Electronics Subsystem; and 32) Electro-Optic Segment-Segment Sensors for Radio and Optical Telescopes.

Source record↗

New Support for Hypotheses of an Ancient Ocean on Mars

A new analog for the giant polygons in the Chryse-Acidalia area suggests that those features may have formed in a major body of water - likely a Late Hesperian to Early Amazonian ocean. This analog -terrestrial polygons in subsea, passive margin basins derives from 3D seismic data that show similar-scale, polygonal fault systems in the subsurface of more than 50 terrestrial offshore basins. The terrestrial and martian polygons share similar sizes, basin-wide distributions, tectonic settings, and association with expected fine-grained sediments. Late Hesperian deposition from outflow floods may have triggered formation of these polygons, by providing thick, rapidly-deposited, fine-grained sediments necessary for polygonal fracturing. The restriction of densely occurring polygons to elevations below approx. -4000 m to -4100 m supports inferences that a body of water controlled their formation. Those same elevations appear to restrict occurrence of polygons in Utopia Planitia, suggesting that this analog may apply also to Utopia and that similar processes may have occurred across the martian lowlands.

Oehler, Dorothy Z.↗

Viking GCMS Data Restoral and Perceiving Temperature on Other Worlds: Astrobiology Projects at NASA Ames

The primary task for the summer was to procure the GCMS data from the National Space Science Data Coordinated Archive (NSSDCA) and to assess the current state of the data set for possible reanalysis opportunities. After procurement of the Viking GCMS data set and analysis of its current state, the internship focus shifted to preparing a plan for restoral and archiving of the GCMS data set. A proposal was prepared and submitted to NASA Headquarters to restore and make available the 8000 mass chromatographs that are the basic data generated by the Viking GCMS instrument. The relevance of this restoral and the methodology we propose for restoral is presented. The secondary task for the summer is to develop a thermal model for the perceived temperature of a human standing on Mars, Titan, or Europa. Traditionally, an equation called "Fanger's comfort equation" is used to measure the perceived temperature by a human in a given reference environment. However, there are limitations to this model when applied to other planets. Therefore, the approach for this project has been to derive energy balance equations from first principles and then develop a methodology for correlating "comfort" to energy balance. Using the -20 C walk-in freezer in the Space Sciences building at NASA Ames, energy loss of a human subject is measured. Energy loss for a human being on Mars, Titan and Europa are calculated from first principles. These calculations are compared to the freezer measurements, e.g. for 1 minute on Titan, a human loses as much energy as x minutes in a -20 C freezer. This gives a numerical comparison between the environments. These energy calculations are used to consider the physiological comfort of a human based on the calculated energy losses.

FangeraEuro(TM)s comfort equation↗