Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Remote In-Situ Quantitative Mineralogical Analysis Using XRD/XRF

X-Ray Diffraction (XRD) is the most direct and accurate method for determining mineralogy. The CHEMIN XRD/XRF instrument has shown promising results on a variety of mineral and rock samples. Additional information is contained in the original extended abstract.

Blake, D. F.↗

CHEMIN: A Mineralogical Dust Analyzer for the Odyssey Mission to Comet Kopff

The Odyssey spacecraft will be launched in June 2006 and will rendezvous with periodic Comet Kopff in September 2009. Odyssey will initially perform slow flybys of the active Kopff nucleus at distances between 500 and 100 km, and will then be placed in orbit around the nucleus at altitudes between 200 and 50 km. Odyssey's scientific payload of seven instruments includes CHEMIN, a mineralogical dust analyzer, which will make the first direct measurements of the crystal structure and elemental composition of cometary dust. CHEMIN will simultaneously perform X-ray Diffraction and X-ray Fluorescence (XRD/XRF) of individual 1-100 micron dust particles collected passively as the spacecraft is immersed in the comet's coma. The instrument has the geometry of a microfocus X-ray camera, with a postage stamp-sized energy-discriminating CCD in place of the film, and a miniature Cu target X-ray tube as the X-ray source. The CHEMIN flight instrument will weigh less than 2 kg., will have a total volume of about 1 liter, and will operate on 3 watts of power. Individual analyses will require 1-2 hours. XRD maxima from 5 to 65 degrees two-theta will be collected, encompassing definitive peaks for all known minerals. XRF data will be simultaneously collected for elements C through U. The instrument has sufficient resolution to allow Rietveld refinement of the diffraction data. Rock types as complex as basalt have been quantitatively analyzed using a CHEMIN laboratory prototype. Selected examples of diffraction experiments performed on more than 30 minerals and rock types by the CHEMIN laboratory prototype will be discussed.

Blake, David↗

Mineralogy and Petrology of Amoeboid Olivine Inclusions in CO3 Chondrites: Relationship to Parent-Body Aqueous Alteration

Petrographic and mineralogic studies of amoeboid olivine inclusions (AOIs) in CO3 carbonaceous chondrites reveal that they are sensitive indicators of parent-body aqueous and thermal alteration. As the petrologic subtype increases from 3.0 to 3.8, forsteritic olivine (Fa(sub 0-1)) is systematically converted into ferroan olivine (Fa(sub 60-75)). We infer that the Fe, Si and O entered the assemblage along grain boundaries, forming ferroan olivine that filled fractures and voids. As temperatures increased, Fe(+2) from the new olivine exchanged with Mg(+2) from the original AOI to form diffusive haloes around low-FeO cores. Cations of Mn(+2), Ca(+2) and Cr(+3) were also mobilized. The systematic changes in AOI textures and olivine compositional distributions can be used to refine the classification of CO3 chondrites into subtypes. In subtype 3.0, olivine occurs as small forsterite grains (Fa(sub 0-1)), free of ferroan olivine. In petrologic subtype 3.2, narrow veins of FeO-rich olivine have formed at forsterite grain boundaries. With increasing alteration, these veins thicken to form zones of ferroan olivine at the outside AOI margin and within the AOI interior. By subtype 3.7, there is a fairly broad olivine compositional distribution in the range Fa(sub 63-70), and by subtype 3.8, no forsterite remains and the high-Fa peak has narrowed, Fa(sub 64-67). Even at this stage, there is incomplete equilibration in the chondrite as a whole (e.g., data for coarse olivine grains in Isna (CO3.8) chondrules and lithic clasts show a peak at Fa(sub39)). We infer that the mineral changes in A01 identified in the low petrologic types required aqueous or hydrothermal fluids whereas those in subtypes greater than or equal to 3.3 largely reflect diffusive exchange within and between mineral grains without the aid of fluids.

Chizmadia, Lysa J.↗

Definitive Mineralogical Analysis of Martian Rocks and Soil Using the CheMin XRD/XRF Instrument and the USDC Sampler

The search for evidence of extant or extinct life on Mars will initially be a search for evidence of present or past conditions supportive of life (e.g., evidence of water), not for life itself. Definitive evidence of past or present water activity lies in the discovery of: * Hydrated minerals: The "rock type" hosting the hydrated minerals could be igneous, metamorphic, or sedimentary, with only a minor hydrated mineral phase. Therefore, the identification of minor phases is important. * Clastic sediments: Clastic sediments are commonly identified by the fact that they contain minerals of disparate origin that could only have come together as a mechanical mixture. Therefore, the identification of all minerals present in a mixture to ascertain mineralogical source regions is important. * Hydrothermal precipitates and chemical sediments: Some chemical precipitates are uniquely identified only by their structure. For example, Opal A, Opal CT, tridymite, crystobalite, high and low Quartz all have the same composition (SiO2) but different crystal structures indicative of different environments - from hydrothermal hydrothermal formation to low temperature precipitation. Other silica types such as stishovite can provide evidence of shock metamorphism. Therefore, identification of crystal structures and structural polymorphs is important. The elucidation of the nature of the Mars soil will require the identification of mineral components that can unravel its history and the history of the Mars atmosphere.

D F Blake↗

Mineralogical Characterization of Lunar Highland Soils

Ten pristine highland soils were selected for this study from Apollo 14 and 16 collections. These soils were chosen for their contrasting maturities, as reflected in their Is/FeO values [6]. For each soil, the 44- 20, 20-10, and < 10 m size fractions were obtained by wet sieving, with triply distilled water [7]. As outlined in Taylor et al. [2], each soil was split into appropriate sizes and distributed to LSCC members. The Tennessee team has characterized these soil size fractions both chemically and mineralogically, with detailed modal and phase compositional analyses, using techniques described previously by our group [8]. The results of the bulk chemistry of each size fraction of the highland soils was presented earlier.

Taylor, L. A.↗

Comparative Planetary Mineralogy: Basaltic Plagioclase from Earth, Moon, Mars and 4 Vesta

Major, minor and trace element analysis of silicates has allowed for the study of planetary basalts in a comparative planetary mineralogy context. We continue this initiative by exploring the chemistry of plagioclase feldspar in basalts from the Earth, Moon, Mars and 4 Vesta. This paper presents new data on plagioclase from six terrestrial basalt suites including Keweenawan, Island Arc, Hawaiian, Columbia Plateau, Taos Plateau, and Ocean Floor; six lunar basalt suites including Apollo 11 Low K, Apollo 12 Ilmenite, Apollo 12 Olivine, Apollo 12 Pigeonite, Apollo 15 Olivine, and Apollo 15 Pigeonite; two basaltic martian meteorites, Shergotty and QUE 94201; and one unequilibrated eucrite, Pasamonte.

Karner, J. M.↗

Characterization of the Effects of Precursor Mineralogy on Hematite Spectra: Application to Martian Hematite Mineralization

The Thermal Emission Spectrometer (TES) instrument aboard Mars Global Surveyor discovered several isolated deposits of gray, crystalline hematite in Sinus Meridiani, Aram Chaos, and Valles Marineris. A variety of formation mechanisms has been proposed for the martian hematite deposits, including aqueous and nonaqueous processes. Comparison of the average Sinus Meridiani hematite spectrum measured by TES to laboratory emissivity spectra for a variety of naturally occurring hematites shows small but potentially important differences. In particular, the emissivity minimum at 300 and 445/cm in the Sinus Meridiani (SM) spectrum is displaced 10-25/cm to lower frequencies compared to some natural hematite samples. In addition, these bands in the TES data are narrower than the broad bands seen in many natural hematite spectra. These differences may imply that the natural variability of hematite spectra has not been fully characterized, especially with respect to the reaction pathway (precursor mineralogy and temperature of hematite formation) and crystal morphology. Here, we describe the thermal infrared spectral characteristics of several series of synthetic hematite samples derived by direct precipitation, dehydroxylation of fine-grained goethite and the oxidation of magnetite. Several natural hematite sample spectra are also presented for comparison. Transmission electron microscopy (TEM) and Mossbauer spectral analyses of selected samples were performed in order to help determine the causes of the changes seen in the infrared spectra.

Glotch, Timothy D.↗

Properties of the Hermean Regolith: New Optical Reflectance Spectra, Comparison with Lunar Anorthosites and Mineralogical Modelling - 5

We present new optical (0.4-0.65 micron) spectra of Mercury and lunar pure anorthosite locations, obtained quasi-simultaneously with the Nordic Optical Telescope (NOT) in 2002. A comparative study is performed with the model of Lucey et al. between iron-poor, mature, pure anorthosite (less than 90% plagioclase feldspar) Clementine spectra from the lunar farside and a combined 0.4-1.0 micron mercurian spectrum, obtained with the NOT, calculated for standard photometric geometry. Mercury is located at more extreme locations in the Lucey ratio-reflectance diagrams than any known lunar soil, specifically with respect to the extremely iron-poor mature anorthosites. Though quantitative prediction of FeO and TiO2 abundances cannot be made without a more generally applicable model, we find qualitatively that the abundances of both these oxides must be near zero for Mercury. We utilize the theory of Hapke, with realistic photometric parameters, to model laboratory spectra of matured mineral powders and lunar soils, and remotely sensed spectra of lunar anorthosites and Mercury. An important difference between fabricated and natural powders is the high value for the internal scattering parameter necessary to interpret the spectra for the former, and the requirement of rough and non-isotropically scattering surfaces in the modelling of the latter. The mature lunar anorthosite spectra were well modelled with binary mixtures of calcic feldspars and olivines, grain sizes of 25-30 micron and a concentration of submicroscopic metallic iron (SMFe) of 0.12-0.15% in grain coatings. The mercurian spectrum is not possible to interpret from terrestrial mineral powder spectra without introducing an average particle scattering function for the bulk soil that increases in backscattering efficiency with wavelength. The observed spectrum is somewhat better predicted with binary mixture models of feldspars and pyroxenes, that single-component regoliths consisting of either albite or diopside. Correct spectral reflectance values were predicted with a concentration of 0.1 wt% SMFe in coatings of 15-30 micron sized grains. Since reasonable cosmogonical formation scenarios for Mercury, or meteoritic infall, predict iron concentrations at least this high, we draw the conclusion that the average grain size of Mercury is about a factor of two smaller than for average returned lunar soil samples. The 0.6-2.5 micron spectrum of McCord and Clark is used to further limit the possible range of mineralogical composition of Mercury. It is found that an intimately mixed and matured 3 : 1 labradorite-to-enstatite regolith composition best matches both the optical and near-infrared spectra, yielding an abundance of approx. 1.2 wt% FeO and -approx. 0 wt% TiO2.

Warell, J.↗

Lunar and Planetary Science XXXV: Mars: Surface Coatings, Mineralogy, and Surface Properties

The session "Mars: Surface Coatings, Mineralogy, and Surface Properties" contained the following reports:High-Silica Rock Coatings: TES Surface-Type 2 and Chemical Weathering on Mars; Old Desert Varnish-like Coatings and Young Breccias at the Mars Pathfinder Landing Site; Analyses of IR-Stealthy and Coated Surface Materials: A Comparison of LIBS and Reflectance Spectra and Their Application to Mars Surface Exploration; Contrasting Interpretations of TES Spectra of the 2003 Rover:Opportunity-Landing Site: Hematite Coatings and Gray Hematite; A New Hematite Formation Mechanism for Mars; Geomorphic and Diagenetic Analogs to Hematite Regions on Mars: Examples from Jurassic Sandstones of Southern Utah, USA; The Geologic Record of Early Mars: A Layered, Cratered, and "Valley-"ed: Volume; A Simple Approach to Estimating Surface Emissivity with THEMIS; A Large Scale Topographic Correction for THEMIS Data; Thermophysical Properties of Meridiani Planum, Mars; Thermophysical and Spectral Properties of Gusev, the MER-Spirit Landing Site on Mars; Determining Water Content of Geologic Materials Using Reflectance Spectroscopy; and Global Mapping of Martian Bound Water at 6.1 Microns Based on TES Data: Seasonal Hydration.

Source record↗

Lunar and Planetary Science XXXV: Mars: Radar, Gamma Ray Spectrometer, and Cratering Mineralogy

The session "Mars: Radar, Gamma Ray Spectrometer, and Cratering Mineralogy" contained the following reports:The Dielectric Properties of Martian Soil Simulant JSC Mars-1 in the Range from 20Hz to 10kHz; Eastern Sahara Geology from Orbital Radar: Potential Analog to Mars On the Dielectric Properties of the Martian-like Surface Sediments; Radar Observations of Recent Mars Landing Sites; Sounding of Subsurface Water Through Conductive Media in Mars Analog Environments Using Transient Electromagnetics and Low Frequency Ground-penetrating Radar; Burial Depth of the Reservoirs of Hydrogen at the Equatorial Latitudes on Mars; Elemental Composition Variations for Large Dusty and Rocky Regions on Mars Using Gamma-Ray Data from the Mars Odyssey Gamma-Ray Spectrometer; The Distribution of Non-Volatile Elements on Mars: Mars Odyssey GRS Results; Using Mars Odyssey GRS Data to Assess Models for the Bulk Composition of Mars; Mars: The Terra Arabia Low Epithermal Neutron Flux Anomaly; The Isidis Basin of Mars: New Results from MOLA, MOC, and THEMIS; Remote Sensing of the Haughton Impact Structure (HIS): A Terrestrial Proof of Concept for Using the Remote Sensing of Martian Craters as a Probe of Subsurface Composition;and Thermal Emission Spectra of Impact Glass and Shocked Deccan Basalt from Lonar Crater, India and Implications for Remote Sensing of Mars.

Source record↗

Mineralogy and Petrology of Unbrecciated Lunar Basaltic Meteorite LAP 02205

LAP 02205 is a 1.2 kg unbrecciated basalt found in the LaPaz icefield of Antarctica during the 2002-2003 ANSMET season [1]. It has been classified as a lunar basalt on the basis of pyroxene Fe/Mn ratios (approx. 60) and oxygen isotopes [1]; both are within previously defined compositional ranges for the Moon [2]. We have initiated a comprehensive study of the mineralogy, petrology and geochemistry of this new and unique meteorite. The results reported here will allow the comparison of this sample both to the other lunar basaltic meteorites (NWA 032, A881757, Y793169, Dho287A), as well as to lunar basalts in the Apollo and Luna collections.

Righter, K.↗

Mineralogy, Abundance, and Hydration State of Sulfates and Chlorides at the Mars Pathfinder Landing Site

Detection of elevated concentrations of S and Cl at the landing sites of Viking 1 and 2 [1], and Mars Pathfinder (MP) [2-5] reveals the presence of sulfates and chlorides in soil and rock samples [1-10]. These data are consistent with the findings of Ca sulfates and NaCl in Martian meteorites [11,12], and with Earth-based spectroscopic observations [13,14] tentatively indicating the presence of sulfates on Mars. Although the correlation of S and Mg in Viking and MP samples could reveal the occurrence of Mg sulfate [1-10], the mineralogy of sulfates and chlorides remains unclear.

Zolotov, M. Y.↗

Mineralogical Study of Hydrated IDPs: X-Ray Diffraction and Transmission Electron Microscopy

Chondritic hydrated interplanetary dust particles (IDPs) comprise up to 50% of all IDPs collected in the stratosphere [1]. Hydrated IDPs are generally believed to be derived from asteroidal sources that have undergone aqueous alteration. However, the high C contents of hydrated IDPs (by 2 to 6X CI levels [2,3]) indicate that they are probably not derived from the same parent bodies sampled by the known chondritic meteorites. Some hydrated IDPs exhibit large deuterium enrichments [4] similar to those observed in anhydrous IDPs. Both anhydrous and hydrated IDPs contain a variety of anhydrous minerals such as silicates, sulfides, oxides, and carbonates. Controversies on hydrated IDPs still exist regarding their formation, history, and relationship to other primitive solar system materials, because of the lack of a systematic series of analysis on individual hydrated IDPs. In this study, we combine our observations of the bulk mineralogy, mineral/ organic chemistry in order to derive a more complete picture of hydrated IDPs.

Nakamura, K.↗

Quantitative Mineralogical Analysis of Mars Analogues Using CHEMIN Data and Rietveld Refinement

Mineralogical analysis is a critical component of planetary surface exploration. Chemical data alone leave serious gaps in our understanding of the surfaces of planets where complex minerals may form in combination with H, S, and halogens. On such planets (e.g., Mars) a single chemical composition may represent a range of mineral assemblages. For example, Viking chemical analyses of excavated duricrust indicate that Mg and S are correlated and ~10% MgSO4 (anhydrous weight) is a likely cementing agent. Pathfinder chemical data support a similar abundance of MgSO4 in the most altered materials. However, there are many possible Mg-sulfates with widely varying hydration states (including dehydrated and 1-, 2-, 3-, 4-, 5-, 6-, and 7-hydrates). In addition, other sulfate minerals such as gypsum (CaSO4 .2H2O) and other salts containing Cl may also exist. X-ray diffraction (XRD) has the ability to decipher mixtures of these phases that would be difficult, if not impossible to unravel using only chemical or spectral data.

Bish, D. L.↗

Mineralogical and chemical characterization of iron-, manganese-, and copper-containing synthetic hydroxyapatites

The National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program is evaluating the use of Fe-, Mn-, and Cu-containing synthetic hydroxyapatite (SHA) as a slow release fertilizer for crops that might be grown on the International Space Station or at Lunar and Martian outposts. Separate Fe-, Mn-, and Cu-containing SHA materials along with a transition-metal free SHA (pure-SHA) were synthesized using a precipitation method. Chemical and mineralogical analyses determined if and how Fe, Mn, and Cu were incorporated into the SHA structure. X-ray diffraction (XRD), Rietveld refinement, and transmission electron microscopy (TEM) confirmed that SHA materials with the apatite structure were produced. Chemical analyses indicated that the metal containing SHA materials were deficient in Ca relative to pure-SHA. The shift in the infrared PO4-mu 3 vibrations, smaller unit cell parameters, smaller particle size, and greater structural strain for Fe-, Mn-, and Cu-containing SHA compared with pure-SHA suggested that Fe, Mn, and Cu were incorporated into SHA structure. Rietveld analyses revealed that Fe, Mn, and Cu substituted into the Ca2 site of SHA. An Fe-rich phase was detected by TEM analyses and backscattered electron microscopy in the Fe-containing SHA material with the greatest Fe content. The substitution of metals into SHA suggests that metal-SHA materials are potential slow-release sources of micronutrients for plant uptake in addition to Ca and P.

NASA Center JSC↗

Low-temperature carbonate concretions in the Martian meteorite ALH84001: evidence from stable isotopes and mineralogy

The martian meteorite ALH84001 contains small, disk-shaped concretions of carbonate with concentric chemical and mineralogical zonation. Oxygen isotope compositions of these concretions, measured by ion microprobe, range from delta18O = +9.5 to +20.5 per thousand. Most of the core of one concretion is homogeneous (16.7 +/- 1.2 per thousand) and over 5 per thousand higher in delta18O than a second concretion. Orthopyroxene that hosts the secondary carbonates is isotopically homogeneous (delta18O = 4.6 +/- 1.2 per thousand). Secondary SiO2 has delta18O = 20.4 per thousand. Carbon isotope ratios measured from the core of one concretion average delta13C = 46 +/- 8 per thousand, consistent with formation on Mars. The isotopic variations and mineral compositions offer no evidence for high temperature (>650 degrees C) carbonate precipitation and suggest non-equilibrium processes at low temperatures (< approximately 300 degrees C).

NASA Center JSC↗

Astrobiological Significance of Definitive Mineralogical Analysis of Martian Surface Samples Using the CheMin XRD/XRF Instrument

The search for evidence of habitability, or of extant or extinct life on Mars, will initially be a search for evidence of past or present conditions supportive of life. The three key requirements for the emergence of life are thought to be liquid water; a suitable energy source; and chemical building blocks. CheMin is a miniaturized XRD/XRF (X-Ray diffraction / X-ray fluorescence) instrument which has been developed for definitive mineralogic analysis of soils and rocks on the Martian surface. The CheMin instrument can provide information that is highly relevant to each of these habitability requirements as summarized below.

Feldman, S. M.↗

Searching for Life Underground: An Analysis of Remote Sensing Observations of a Drill Core from Rio Tinto, Spain for Mineralogical Indications of Biological Activity

Water is unstable on the surface of Mars, and therefore the Martian surface is not likely to support life. It is possible, however, that liquid water exists beneath the surface of Mars, and thus life might also be found in the subsurface. Subsurface life would most likely be microbial, anaerobic, and chemoautotrophic; these types of biospheres on Earth are rare, and not well understood. Finding water and life are high priorities for Mars exploration, and therefore it is important that we learn to explore the subsurface robotically, by drilling. The Mars Analog Rio Tinto Experiment (MARTE), has searched successfully for a subsurface biosphere at Rio Tinto, Spain [1,2,3,4]. The Rio Tinto study site was selected to search for a subsurface biosphere because the extremely low pH and high concentrations of elements such as iron and copper in the Tinto River suggest the presence of a chemoautotrophic biosphere in the subsurface beneath the river. The Rio Tinto has been recognized as an important mineralogical analog to the Sinus Meridiani site on Mars [5].

Battler, M.↗