Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Constraints on the Neutron Star and Inner Accretion Flow in Serpens X-1 Using Nustar

We report on an observation of the neutron star low-mass X-ray binary Serpens X-1, made with NuSTAR. The extraordinary sensitivity afforded by NuSTAR facilitated the detection of a clear, robust, relativistic Fe K emission line from the inner disk. A relativistic profile is required over a single Gaussian line from any charge state of Fe at the 5 sigma level of confidence, and any two Gaussians of equal width at the same confidence. The Compton back-scattering "hump" peaking in the 10-20 keV band is detected for the first time in a neutron star X-ray binary. Fits with relativistically blurred disk reflection models suggest that the disk likely extends close to the innermost stable circular orbit (ISCO) or stellar surface. The best-fit blurred reflection models constrain the gravitational redshift from the stellar surface to be ZnS (is) greater than 0.16. The data are broadly compatible with the disk extending to the ISCO; in that case,ZnS(is) greater than 0.22 and RNS (is) less than12.6 km (assuming MnS = 1.4 solar mass and a = 0, where a = cJ/GM2). If the star is as large or larger than its ISCO, or if the effective reflecting disk leaks across the ISCO to the surface, the redshift constraints become measurements. We discuss our results in the context of efforts to measure fundamental properties of neutron stars, and models for accretion onto compact objects.

accretion↗

Agentic Diagrammatica: Towards Autonomous Symbolic Computation in High Energy Physics

We present Diagrammatica, a symbolic computation extension to the HEPTAPOD agentic framework, which enables LLM agents to plan and execute multi-step theoretical calculations. Symbolic computation poses a distinctive reliability challenge for LLM agents, as correctness is governed by implicit mathematical conventions that are not encoded in a form that can be easily checked in the computational backend. We identify two complementary remedies, tool-constrained computation and targeted knowledge grounding, and pursue the first as the primary architecture. Concretely, we concentrate the agent's action distribution onto tool calls with convention-fixing semantics, in which the agent specifies a compact, human-auditable diagram specification and a trusted backend performs the symbolic or numerical manipulations exactly. The toolkit provides two complementary calculation paths consuming a shared diagram specification: Naive Dimensional Analysis (NDA) for order-of-magnitude rate estimates and Exact Diagrammatic Analysis (EDA) for tree-level symbolic calculations via automatic FeynCalc code generation, both supplemented by automatic Feynman diagram enumeration and a navigable theory knowledge base. The architecture is validated on two benchmarks: (1) an exhaustive catalog of all tree-level, single-vertex $1\to 2$ partial decay widths across scalar, fermion, and vector parents, with complete massless and threshold limits and Standard Model validation; and (2) an NDA sensitivity study of the muon decay multiplicity $μ^+ \to ν_μ\barν_e + n(e^+e^-) + e^-$, determining the maximum observable $n$ at current and planned muon experiments.

Menzo, Tony [Alabama U.; Fermilab] (ORCID:00000002↗

A new method for measuring the 3D turbulent velocity dispersion of molecular clouds

ABSTRACT The structure and star formation activity of a molecular cloud are fundamentally linked to its internal turbulence. However, accurately measuring the turbulent velocity dispersion is challenging due to projection effects and observational limitations, such as telescope resolution, particularly for clouds that include non-turbulent motions, such as large-scale rotation. Here, we develop a new method to recover the 3D turbulent velocity dispersion (σv,3D) from position–position–velocity (PPV) data. We simulate a rotating, turbulent, collapsing molecular cloud, and compare its intrinsic σv,3D with three different measures of the velocity dispersion accessible in PPV space: (1) the spatial mean of the 2nd-moment map, σi, (2) the standard deviation of the gradient/rotation-corrected 1st-moment map, σ(c − grad), and (3) a combination of (1) and (2), called the ‘gradient-corrected parent velocity dispersion’, $\sigma _{\mathrm{(p}-\mathrm{grad)}}=(\sigma _{\mathrm{i}}^2+\sigma _{(\mathrm{c}-\mathrm{grad)}}^2)^{1/2}$. We show that the gradient correction is crucial in order to recover purely turbulent motions of the cloud, independent of the orientation of the cloud with respect to the line of sight. We find that with a suitable correction factor and appropriate filters applied to the moment maps, all three statistics can be used to recover σv,3D, with method 3 being the most robust and reliable. We determine the correction factor as a function of the telescope beam size for different levels of cloud rotation, and find that for a beam full width at half-maximum f and cloud radius R, the 3D turbulent velocity dispersion can best be recovered from the gradient-corrected parent velocity dispersion via $\sigma _{v,\mathrm{3D}}= \left[(-0.29\pm 0.26)\, f/R + 1.93 \pm 0.15\right] \sigma _{\mathrm{(p}-\mathrm{grad)}}$ for f/R < 1, independent of the level of cloud rotation or LOS orientation.

Stewart, Madeleine↗

Measurement of the -3 keV resonance in the {sup 13}C({alpha},n){sup 16}O reaction and its influence on the synthesis of s-process nuclei

The {sup 13}C({alpha},n){sup 16}O reaction is the neutron source for the main component of the s-process, responsible of the production of most nuclei in the mass range 90 < A < 204. It is active inside the helium-burning shell in asymptotic giant branch stars, at temperatures < 10{sup 8} K, corresponding to an energy interval where the {sup 13}C({alpha},n){sup 16}O is effective of 140 - 230 keV. In this region, the astrophysical S(E)-factor is dominated by the -3 keV sub-threshold resonance due to the 6.356 MeV level in {sup 17}O, giving rise to a steep increase of the S-factor. Notwithstanding that it plays a crucial role in astrophysics, no direct measurements exist. Therefore, we have applied the Trojan Horse Method (THM) to the {sup 13}C({sup 6}Li,n{sup 16}O)d quasi-free reaction to achieve an experimental estimate of such contribution. For the first time, the ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing to attain an unprecedented accuracy in the {sup 13}C({alpha},n){sup 16}O study. Though a larger ANC for the 6.356 MeV level is measured, our experimental S(E) factor agrees with the most recent extrapolation in the literature in the 140 - 230 keV energy interval, the accuracy being greatly enhanced thanks to this innovative approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ON THE MEASUREMENT OF THE {sup 13}C(α, n){sup 16}O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

The {sup 13}C(α, n){sup 16}O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼< A ∼< 208. This reaction takes place inside the helium-burning shell of asymptotic giant branch stars, at temperatures ∼< 10{sup 8} K, corresponding to an energy interval where the {sup 13}C(α, n){sup 16}O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in {sup 17}O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the {sup 13}C({sup 6}Li, n {sup 16}O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the {sup 13}C(α, n){sup 16}O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde{sub α{sup 1}{sup 3}C}{sup 17O(1/2+)2} = 7.7 ± 0.3{sub stat} {sub -1.5}{sup +1.}|6 norm fm{sup –1}, yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the {sup 13}C(α, n){sup 16}O reaction rate below about 8 × 10{sup 7} K if compared with the recommended values. At ∼10{sup 8} K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MID-INFRARED PROPERTIES OF NEARBY LUMINOUS INFRARED GALAXIES. I. SPITZER INFRARED SPECTROGRAPH SPECTRA FOR THE GOALS SAMPLE

The Great Observatories All-Sky LIRG Survey (GOALS) is a comprehensive, multiwavelength study of luminous infrared galaxies (LIRGs) in the local universe. Here we present low resolution Spitzer Infrared Spectrograph spectra covering 5-38 {mu}m and provide a basic analysis of the mid-IR spectral properties observed for nearby LIRGs. In a companion paper, we discuss detailed fits to the spectra and compare the LIRGs to other classes of galaxies. The GOALS sample of 244 nuclei in 180 luminous (10{sup 11} {<=} L {sub IR}/L {sub Sun} < 10{sup 12}) and 22 ultraluminous (L {sub IR}/L {sub Sun} {>=} 10{sup 12}) IR galaxies represents a complete subset of the IRAS Revised Bright Galaxy Sample and covers a range of merger stages, morphologies, and spectral types. The majority (>60%) of the GOALS LIRGs have high 6.2 {mu}m polycyclic aromatic hydrocarbon (PAH) equivalent widths (EQW{sub 6.2{mu}m} > 0.4 {mu}m) and low levels of silicate absorption (s {sub 9.7{mu}m} > -1.0). There is a general trend among the U/LIRGs for both silicate depth and mid-infrared (MIR) slope to increase with increasing L {sub IR}. U/LIRGs in the late to final stages of a merger also have, on average, steeper MIR slopes and higher levels of dust obscuration. Together, these trends suggest that as gas and dust is funneled toward the center of a coalescing merger, the nuclei become more compact and more obscured. As a result, the dust temperature increases also leading to a steeper MIR slope. The sources that depart from these correlations have very low PAH equivalent width (EQW{sub 6.2{mu}m} < 0.1 {mu}m) consistent with their emission being dominated by an active galactic nucleus (AGN) in the MIR. These extremely low PAH EQW sources separate into two distinct types: relatively unobscured sources with a very hot dust component (and thus very shallow MIR slopes) and heavily dust obscured nuclei with a steep temperature gradient. The most heavily dust obscured sources are also the most compact in their MIR emission, suggesting that the obscuring (cool) dust is associated with the outer regions of the starburst and not simply a measure of the dust along the line of sight through a large, dusty disk. A marked decline is seen for the fraction of high EQW (star formation dominated) sources as the merger progresses. The decline is accompanied by an increase in the fraction of composite sources while the fraction of sources where an AGN dominates the MIR emission remains low. When compared to the MIR spectra of submillimeter galaxies (SMGs) at z {approx} 2, both the average GOALS LIRG and ULIRG spectra are more absorbed at 9.7 {mu}m and the average GOALS LIRG has more PAH emission. However, when the AGN contributions to both the local GOALS LIRGs and the high-z SMGs are removed, the average local starbursting LIRG closely resembles the starburst-dominated SMGs.

79 ASTRONOMY AND ASTROPHYSICS↗

TEM Analyses of Itokawa Regolith Grains and Lunar Soil Grains to Directly Determine Space Weathering Rates on Airless Bodies

Samples returned from the moon and Asteroid Itokawa by NASA's Apollo Missions and JAXA's Hayabusa Mission, respectively, provide a unique record of their interaction with the space environment. Space weathering effects result from micrometeorite impact activity and interactions with the solar wind. While the effects of solar wind interactions, ion implantation and solar flare particle track accumulation, have been studied extensively, the rate at which these effects accumulate in samples on airless bodies has not been conclusively determined. Results of numerical modeling and experimental simulations do not converge with observations from natural samples. We measured track densities and rim thicknesses of three olivine grains from Itokawa and multiple olivine and anorthite grains from lunar soils of varying exposure ages. Samples were prepared for analysis using a Leica EM UC6 ultramicrotome and an FEI Quanta 3D dual beam focused ion beam scanning electron microscope (FIB-SEM). Transmission electron microscope (TEM) analyses were performed on the JEOL 2500SE 200kV field emission STEM. The solar wind damaged rims on lunar anorthite grains are amorphous, lack inclusions, and are compositionally similar to the host grain. The rim width increases as a smooth function of exposure age until it levels off at approximately 180 nm after approximately 20 My (Fig. 1). While solar wind ion damage can only accumulate while the grain is in a direct line of sight to the Sun, solar flare particles can penetrate to mm-depths. To assess whether the track density accurately predicts surface exposure, we measured the rim width and track density in olivine and anorthite from the surface of rock 64455, which was never buried and has a surface exposure age of 2 My based on isotopic measurements. The rim width from 64455 (60-70nm) plots within error of the well-defined trend for solar wind amorphized rims in Fig. 1. Measured solar flare track densities are accurately reflecting the surface exposure of the grains. Track densities correlate with the amorphous rim thicknesses. While the space-weathered rims of anorthite grains are amorphous, the space-weathered rims on both Itokawa and lunar olivine grains show solar wind damaged rims that are not amorphous. Instead, the rims are nanocrystalline with high dislocation densities and sparse inclusions of nanophase Fe metal. The rim thicknesses on the olivine grains also correlate with track density. The Itokawa olivine grains have track densities that indicate surface exposures of approximately 10(exp 5) years. Longer exposures (up to approximately 10(exp 7) years) do not amorphize the rims, as evidenced by lunar soil olivines with high track densities (approximately 10(exp 11) cm(exp -2)). From the combined data, shown in Fig. 1, it is clear that olivine is damaged (but not amorphized) more rapidly by the solar wind compared to anorthite. The olivine damaged rim forms quickly (in approximately 10(exp 6) y) and saturates at approximately 120nm with longer exposure time. The anorthite damaged rims form more slowly, amorphize, and grow thicker than the olivine rims. This is in agreement with numerical modeling data which predicts that solar wind damaged rims on anorthite will be thicker than olivine. However, the models predict that both olivine and anorthite rims will amorphize and reach equilibrium widths in less than 10(exp 3) y, in contrast to what is observed for natural samples. Laboratory irradiation experiments, which show rapid formation of fully amorphous and blistered surfaces from simulated solar wind exposures are also in contrast to observations of natural samples. These results suggest that there is a flux dependence on the type and extent of irradiation damage that develops in olivine. This flux dependence suggests that great caution be used in extrapolating between high-flux laboratory experiments and the natural case, as demonstrated by. We constrain the space weathering rate through analysis of returned samples. Provided that the track densities and the solar wind damaged rim widths exhibited by the Itokawa grains are typical of the fine-grained regions of Itokawa, then the space weathering rate is on the order of 10(exp 5) y. Space weathering effects in lunar soils saturate within a few My of exposure while those in Itokawa regolith grains formed in approximately 10(exp 5) y. Olivine and anorthite respond differently to solar wind irradiation. The space weathering effects in olivine are particularly difficult to reconcile with laboratory irradiation studies and numerical models. Additional measurements, experiments, and modeling are required to resolve the discrepancies among the observations and calculations involving solar wind amorphization of different minerals on airless bodies.

Berger, Eve L.↗

A first order theory of the p/+/-n-n/+/ edge-illuminated silicon solar cell at very high injection levels

A first order theory of the edge-illuminated p(+)-n-n(+) silicon solar cell under very high injection levels has been derived. The very high injection level illuminated J-V characteristic is derived for any general base width to diffusion length (W/L) ratio and it includes the minority carrier reflection by the n-n(+) high-low junction. The beneficial effects of the high-low junction are shown to be significant until extremely high injection levels are reached. The theoretical dependencies of Jsc and Voc on temperature, incident intensity, and base resistivity are derived and discussed in detail. Some experimental results are given and these are discussed in relation to the theory.

Goradia, C.↗

Gyrokinetic simulations of reverse shear Alfven eigenmodes in DIII-D plasmas

A gyrokinetic ion/mass-less fluid electron hybrid model as implemented in the GEM code [Y. Chen and S. E. Parker, J. Comput. Phys. 220, 837 (2007)] is used to study the reverse shear Alfven eigenmodes (RSAE) observed in DIII-D, discharge no. 142111. This is a well diagnosed case with measurement of the core-localized RSAE mode structures and the mode frequency, which can be used to compare with simulations. Simulations reproduce many features of the observation, including the mode frequency up-sweeping in time and the sweeping range. A new algorithmic feature is added to the GEM code for this study. Instead of the gyrokinetic Poisson equation itself, its time derivative, or the vorticity equation, is solved to obtain the electric potential. This permits a numerical scheme that ensures the E Multiplication-Sign B convection of the equilibrium density profiles of each species cancel each other in the absence of any finite-Larmor-radius effects. These nonlinear simulations generally result in an electron temperature fluctuation level that is comparable to measurements, and a mode frequency spectrum broader than the experimental spectrum. The spectral width from simulations can be reduced if less steep beam density profiles are used, but then the experimental fluctuation level can be reproduced only if a collision rate above the classical level is assumed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photodissociation resonances of jet-cooled NO{sub 2} at the dissociation threshold by CW-CRDS

Around 398 nm, the jet-cooled-spectrum of NO{sub 2} exhibits a well identified dissociation threshold (D{sub 0}). Combining the continuous-wave absorption-based cavity ringdown spectroscopy technique and laser induced fluorescence detection, an energy range of ∼25 cm{sup −1} is analyzed at high resolution around D{sub 0}. In addition to the usual molecular transitions to long-lived energy levels, ∼115 wider resonances are observed. The position, amplitude, and width of these resonances are determined. The resonance width spreads from ∼0.006 cm{sup −1} (i.e., ∼450 ps) to ∼0.7 cm{sup −1} (∼4 ps) with large fluctuations. The identification of at least two ranges of resonance width versus the excess energy can be associated with the opening of the dissociation channels NO{sub 2}→NO(X {sup 2}Π{sub 1/2}, v=0, J=1/2)+O({sup 3}P{sub 2}) and NO{sub 2}→NO(X {sup 2}Π{sub 1/2}, v=0, J=3/2)+O({sup 3}P{sub 2}). This analysis corroborates the existence of loose transition states close to the dissociation threshold as reported previously and in agreement with the phase space theory predictions as shown by Tsuchiya’s group [Miyawaki et al., J. Chem. Phys. 99, 254–264 (1993)]. The data are analyzed in the light of previously reported frequency- and time-resolved data to provide a robust determination of averaged unimolecular dissociation rate coefficients. The density of reactant levels deduced (ρ{sub reac} ∼ 11 levels/cm{sup −1}) is discussed versus the density of transitions, the density of resonances, and the density of vibronic levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved microscopic-macroscopic approach incorporating the effects of continuum states

The Woods-Saxon-Strutinsky method (the microscopic-macroscopic method) combined with the Kruppa prescription for positive-energy levels, which is necessary to treat neutron-rich nuclei, is studied to clarify the reason for its success and to propose improvements for its shortcomings. The reason why the plateau condition is met for the Nilsson model but not for the Woods-Saxon model is understood in a new interpretation of the Strutinsky smoothing procedure as a low-pass filter. Essential features of the Kruppa level density is extracted in terms of the Thomas-Fermi approximation modified to describe spectra obtained from diagonalization in truncated oscillator bases. A method is proposed, which weakens the dependence on the smoothing width by applying the Strutinsky smoothing only to the deviations from a reference level density. The BCS equations are modified for the Kruppa spectrum, which is necessary to treat the pairing correlation properly in the presence of a continuum. The potential depth is adjusted for the consistency between the microscopic and macroscopic Fermi energies. It is shown, with these improvements, that the microscopic-macroscopic method is now capable to reliably calculate binding energies of nuclei far from stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Tolerance levels of EPID-based quality control for volumetric modulated arc therapy

Purpose: Volumetric modulated arc therapy (VMAT) includes features such as a variable dose rate and gantry speed in addition to the beam modulation achieved with multileaf collimator (MLC) motion patterns employed in intensity modulated radiotherapy. Three tests have previously been proposed for the evaluation of the performance of VMAT delivery. In order to enable a convenient and accurate routine machine quality control (QC) program, the present study proposes tolerance levels for these tests based on a department-wide implementation of an electronic portal imaging device (EPID)-based QC. Methods: Three different VMAT tests--a picket fence (PF) test, a dose rate versus gantry speed (DRGS) test, and a dose rate versus MLC leaf speed (DRMLC) test--were performed on nine accelerators using two different EPIDs (aS1000 and aS500, Varian Medical Systems). All tests were repeated six times for each accelerator. The images were analyzed using an in-house-developed software. For the PF test, the positions and widths of individual MLC leaf gaps were compared to the mean value. In the DRGS and DRMLC tests, different combinations of dose rate, gantry speed, and MLC leaf speed were used to deliver identical doses to separate parts of the EPID. The tests were evaluated by looking for deviations in the constancy of the measured dose for the preset combinations of dose rate, gantry speed, and MLC leaf speed. Results: For the PF test, a 0.3 mm tolerance level was suggested for the positioning of the MLC leaves. The tolerance level for the gap width was 0.5 mm. For the DRGS and DRMLC tests, a 3% tolerance level was proposed. Conclusions: With the adapted levels of tolerance for an EPID-based approach, the PF, the DRGS, and the DRMLC tests offer a convenient and accurate machine QC program for linear accelerators used for VMAT.

07 ISOTOPE AND RADIATION SOURCES↗

Broadening of the D lines and the relaxation of the resonance levels of sodium due to collisions with helium.

Calculated potentials for the NaHe molecule are used to obtain collision-induced widths and shifts for the sodium D lines together with cross sections for fine-structure transitions and the relaxation of the multipole polarizations of the resonance levels. The atomic collision is treated in an adiabatic approximation in which the colliding atoms form a molecular system which rotates during the collision. We find the resonance lines to be broadened equally and to be approximately 70% wider, and with associated shifts of an order of magnitude smaller, than expected on the basis of van der Waals forces. The dependence of the cross sections for relaxation of the multipole polarizations of the resonance levels on the molecular-coupling conditions and the rotation of the system during collision is discussed and indicates a limitation of the sum rule for these cross sections.

Lewis, E. L.↗

Quantum heating of a parametrically modulated oscillator: Spectral signatures

We show that the noise spectrum of a parametrically excited nonlinear oscillator can display a fine structure. It emerges from the interplay of the nonequidistance of the oscillator quasienergy levels and quantum heating that accompanies relaxation. The heating leads to a finite-width distribution over the quasienergy, or Floquet states, even for zero temperature of the thermal reservoir coupled to the oscillator. The fine structure is due to transitions from different quasienergy levels, and thus it provides a sensitive tool for studying the distribution. For larger damping, where the fine structure is smeared out, quantum heating can be detected from the characteristic double-peak structure of the spectrum, which results from transitions accompanied by the increase or decrease of the quasienergy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model-independent Higgs coupling measurements at the LHC using the H{yields}ZZ{yields}4l lineshape

We show that combining a direct measurement of the Higgs total width from the H{yields}ZZ{yields}4l lineshape with Higgs signal rate measurements allows Higgs couplings to be extracted in a model-independent way from CERN LHC data. Using existing experimental studies with 30 fb{sup -1} at one detector of the 14 TeV LHC, we show that the couplings squared of a 190 GeV Higgs to WW, ZZ, and gg can be extracted with statistical precisions of about 10%, and a 95% confidence level upper limit on an unobserved component of the Higgs decay width of about 22% of the standard model Higgs width can be set. The method can also be applied for heavier Higgs masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Temperature dependence of the photoluminescence emission from In{sub x}Ga{sub 1-x}As quantum wells on GaAs(311) substrates

We studied the photoluminescence (PL) properties of In{sub 0.2}Ga{sub 0.8}As/GaAs quantum well structures grown by molecular beam epitaxy on (311)-oriented substrates. The structure consists of three quantum wells (QWs) of 100, 50, and 25 A nominal thickness. The temperature dependence of the PL emission from the QWs in the range of 5-250 K is reported. Three models by Varshni, Vina, and Paessler, respectively, were employed to analyze the variation in the excitonic energy transitions as a function of temperature. We compared the excitonic behavior with the band gap temperature dependence of bulk In{sub 0.2}Ga{sub 0.8}As and found a difference, as opposed to the unstrained AlGaAs/GaAs system. We attributed this difference to the modification of the QW energy levels by the quantum confinement Stark effect, which is temperature and well width dependent.

36 MATERIALS SCIENCE↗

Calculation of narrower confidence intervals for tree mortality rates when we know nothing but the location of the death/survival events

Abstract Many ecological applications, like the study of mortality rates, require the estimation of proportions and confidence intervals for them. The traditional way of doing this applies the binomial distribution, which describes the outcome of a series of Bernoulli trials. This distribution assumes that observations are independent and the probability of success is the same for all the individual observations. Both assumptions are obviously false in many cases. I show how to apply bootstrap and the Poisson binomial distribution (a generalization of the binomial distribution) to the estimation of proportions. Any information at the individual level would result in better (narrower) confidence intervals around the estimation of proportions. As a case study, I applied this method to the calculation of mortality rates in a forest plot of tropical trees in Lambir Hills National Park, Malaysia. I calculated central estimates and 95% confidence intervals for species‐level mortality rates for 1,007 tree species. I used a very simple model of spatial dependence in survival to estimate individual‐level risk of mortality. The results obtained by accounting for heterogeneity in individual‐level risk of mortality were comparable to those obtained with the binomial distribution in terms of central estimates, but the precision increased in virtually all cases, with an average reduction in the width of the confidence interval of ~20%. Spatial information allows the estimation of individual‐level probabilities of survival, and this increases the precision in the estimates of mortality rates. The general method described here, with modifications, could be applied to reduce uncertainty in the estimation of proportions related to any spatially structured phenomenon with two possible outcomes. More sophisticated approaches can yield better estimates of individual‐level mortality and thus narrower confidence intervals.

59 BASIC BIOLOGICAL SCIENCES↗