Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEACHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Economic analysis of precious metal recovery from electronic waste through gas-assisted microflow extraction

The recycling of end-of-life (EoL) electronic products is motivated by the enormous investment of resources in their creation and the environmental concerns associated with electronic waste (e-waste). Hydrometallurgical methods that utilize conventional leaching and solvent extraction are often applied to extract target materials from e-waste; however, these techniques have significant technical and economic limitations when extracting high-value, low concentration metals from complex waste streams. This study proposes and evaluates a novel process based on gas-assisted microflow extraction (GAME) that efficiently recovers precious metals from waste printed circuit boards (WPCBs). Further, an economic analysis is conducted to verify the economic feasibility of the GAME-based process at an industrial scale. The economic outputs are further investigated to identify the most cost-effective production strategies, particularly with respect to the plant feedstock rate. It is envisioned that this study may establish a paradigm for making economically-informed decisions for sustainable technologies.

42 ENGINEERING↗
DOE OSTI2022

Current nature-based biological practices for rare earth elements extraction and recovery: Bioleaching and biosorption

There is a growing demand for advancing products and renewable technologies worldwide that rely on rare earth elements (REEs), including those directly necessary for a low-carbon energy transition, national security applications, and consumer electronics. This study focuses on current nature-based biological methods (i.e., bioleaching and biosorption) for REEs extraction from electronic wastes (e-wastes) and ore deposits. Herein, comprehensive narrative and systematic reviews of bioleaching and biosorption extraction methods are performed to identify their sustainability challenges and benefits, and highlight the potential pathways that would address the existing gaps. From the narrative review, it is evident that biological methods for REEs extraction are more environmentally friendly than conventional methods currently used in the REE mining industry (e.g., acid leaching and solvent extraction). From the systematic review, it is clear that bioleaching and biosorption research has been a rapidly growing field of interest over the last 10 years, particularly for precious metals extraction (e.g., copper and gold). From both reviews, it is apparent that REEs extraction from domestic ore deposits alone is inadequate, and sustainable REEs recovery from e-wastes is also necessary to meet the growing REEs demand. It is concluded that targeted mixed REEs extraction for specific products can be a potential pathway for sustainable REEs extraction from both ore and e-wastes that would reduce separation costs and emissions from the associated use of harsh chemicals. It is further concluded that nature-based biological REE extraction solutions offer an opportunity to generate significant socio-economic and environmental benefits.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Black carbon enriches short-range-order ferrihydrite in Amazonian Dark Earth: Interplay mechanism and environmental implications

Our study underpins the mechanism of organo-mineral interaction between black carbon (BC, biochar) and associated minerals in the historical BC-rich Amazonian Dark Earth (ADE) by using synchrotron-based microscopic (TXM), microspectroscopic (μFTIR) and spectroscopic (XAS and μ-diffraction) approaches. The BC-rich ADE contained over 100% more poorly crystalline minerals than the adjacent tropical soil. Linear combination fitting of k-spacing in the X-ray Absorption Spectra (XAS) revealed that ferrihydrite contributed to 81.1% of the Fe-minerals in BC. A small but distinct peak was observed at 5.7 Å –1 in the extended X-ray absorption fine structure k oscillation of BC, revealing the presence of Fe—C (including Fe-O-C) covalent bonds. No Fe—C path was yielded by the XAS fitting when an obvious peak downshift of the first (Fe—Fe 1 ) shell was observed, suggesting that the availability of inner-sphere Fe—C complexation was limited to the BC surface and interphase region. In this study, the main minerals for organo-mineral complexation were short-range-order (SRO) ferrihydrite on BC instead of corner-sharing FeO 6 octahedra. Compared to ADE, the coordination number of the first (Fe—Fe 1 ) and second (Fe—Fe 2 ) shell was higher in BC, revealing a higher degree of order in coordination between the neighboring Fe mineral crystals. Black C limited the progressive aging of amorphous Fe phases and greatly enriched SRO ferrihydrite in the redox-fluctuating and high-leaching environment. The transformation of SRO ferrihydrite into the more crystalline Fe oxides was controlled by the local pH environment. A strong signal from the complexed phenolic group (aryl-OH, 1241 cm –1 ) and a distinct band of inner-sphere complexation (Fe-aryl C, 1380–1384 cm –1 ) were identified in the FTIR spectra. The enrichment of poorly crystalline minerals can have positive feedback on the long-term stabilization of BC. The scale-up application of biochar to agricultural and ecological systems may have a long-lasting impact on the enrichment and transformation of the SRO minerals in the soil.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Water acidification aggravates lithium-induced toxicity represented by energy supply, oxidative stress, and cell fate in Daphnia magna neonates

Lithium is extensively utilized in industrial energy production, particularly in lithium-ion batteries, and in pharmaceuticals for the treating clinical mood disorders. Consequently, lithium is frequently detected in various environmental matrices. It has been reported to cause a range of toxic effects on aquatic organisms including oxidative stress, neurological disorders, and reproductive suppression. Water acidification is a global issue with numerous negative impacts on aquatic organisms. It can alter the physio-chemical properties and bioavailability of metal ions. The acidic leaching process during lithium battery treatment and global water acidification both suggest that lithium contamination often occurs in acidic environments. In the present study, Daphnia magna neonates were exposed to four treatments (control, lithium alone, low pH, and combined) to investigate whether an acidic environment exacerbates the toxic effects of lithium on aquatic organisms and to explore potential toxic action mechanisms. The results indicated that low pH posed a significant threat to the growth and reproduction of D. magna. When exposed to both lithium and low pH, there was increased lithium accumulation and an energy trade-off response, leading to increased energy allocation to reproduction and reduced energy for growth. Lithium exposure stimulated D. magna activity, while low pH inhibited it, suggesting that an imbalance in energy consumption and supply. Combined exposure to lithium and low pH resulted in severe oxidative stress due to mitochondrial dysfunction, under-utilization of energy substances, and increased ionic homeostasis disturbances. Consequently, the exposed organism altered apoptosis and autophagy processes to maintain homeostasis. In conclusion, the present study demonstrated that lithium and water acidification posed a population-level threat to D. magna, and their combined exposure significantly largely exacerbated the toxic effects.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Bioleaching ion-unexchangeable rare earth in ion-adsorption type rare earth waste tailing

Ion-adsorption type rare earth ores (IREO) in China serve as the primary source of medium and heavy rare earth globally. With the rapidly growing demand for rare earth elements (REEs) and the dwindling supply of premium IREO, enhancing the recovery of REEs, especially the ion-unexchangeable REEs with ultra-low content and ambiguous speciation from IREO or its tailing, has become a critical trend and challenge. Here, this study identified the occurrences of ion-unexchangeable REEs, primarily detected in Fe-enriched minerals, xenotime, and monazite of IREO using TESCAN integrated mineral analyzer (TIMA) and laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) analysis. To extract these elusive REEs, a bioleaching technique utilizing Aspergillus niger (A. niger) metabolites was proposed, achieving a leaching yield of 31.4 wt%. Complementary sequential chemical extraction methods (SCEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations further elucidate the underlying mechanism, involving the carboxylic acid produced by the metabolic process of microbes that dissolves goethite by disrupting Fe—O bonds and liberating REEs, which complexed with carboxylate (R—COO—), to promote further dissolution. This work offers insight into enhancing the recovery of ion-unexchangeable REEs from IREO or its tailing, paving the way for sustainable and efficient rare earth mining practices.

42 ENGINEERING↗
DOE OSTI2022

Susceptibility of new soil organic carbon to mineralization during dry-wet cycling in soils from contrasting ends of a precipitation gradient

The persistence of soil organic carbon (SOC) is influenced by soil physicochemical properties, organic matter quality, and climatic conditions that govern its vulnerability to microbial activity. We compared the susceptibility of newly formed SOC to mineralization in two soils (Andosols) that developed under contrasting precipitation regimes. Soil from the high rainfall region (‘high rain ’) had higher SOC and lower iron concentrations than soils exposed to less rainfall (‘low rain ’). We amended soils with 13 C-labeled carbohydrates and measured the amount of substrate-derived SO 13 C mineralized when exposed to dry-wet cycling following months-long incubations. We hypothesized that susceptibility would differ due to iron content and mineralogy, initial SOC, substrate solubility (cellulose versus glucose amendment), and microbial substrate use efficiency (SUE). We found that SO 13 C was less susceptible to dry-wet cycling when more 13 C was assimilated into microbial biomass and co-localized with mineral surfaces than when co-localized with existing organo-mineral surfaces, according to microscale NanoSIMS imaging. Considerably less SO 13 C was susceptible to mineralization in the ferrihydrite-rich (low SOC) low rain soil than the leached (high SOC) high rain soil when C was added as either glucose (7.3-fold less C mineralized) or cellulose (15.2-fold less). Additionally, the SUE of glucose was comparable to cellulose in low rain soil where SO 13 C was less water soluble and coprecipitated with ferrihydrite, and used half as efficiently as cellulose in high rain soil. Our results show that the susceptibility of newly formed SOC to mineralization is modified by the effects of bioavailability on microbial metabolism and the availability of mineral surfaces for forming new organo-mineral complexes.

21 NanoSIMS↗
DOE OSTI2020

Critical material content in modern conventional U.S. vehicle electronics

Critical materials (CM) are vital to modern technology. Components of modern vehicles can be recycled to recover and reuse the CMs to help ensure a supply of these materials. Electronic components from a 2015 GMC Sierra truck (21 components) and 2016 Toyota Camry sedan (10 components) were analyzed for CMs. The components were processed via size reduction, aqua regia leaching and dissolution, and final solutions were analyzed for metal content. It was found that most electronic components of both vehicles contain CM. The most concentrated CM in the components were Sn, Nb, and Tb. Nd and Co were found in several of the magnetic components. CM economic value was found to be low compared to the overall value of the components, and the CM content would not allow for a viable pathway for recycling. Remanufacturing of components may be a more economic option of reuse in the future.

2015 GMC Sierra↗
DOE OSTI2020

Selective sulfur removal from semi-dry flue gas desulfurization coal fly ash for concrete and carbon dioxide capture applications

High-sulfur mixed fly ash residues from semi-dry flue gas desulfurization units in coal-fired power plants are unsuitable for use as supplementary cementitious material (SCM) for concrete production or carbon dioxide utilization. In this work, we explore the potential for upcycling a representative spray dry absorber ash (10.44 wt% SO 3 ) into concrete-SCM by selective sulfur removal via weak acid dissolution while simultaneously exploring the possibility for CO 2 capture. Towards this effort, parametric studies varying liquid-to-solid ratio, acidity, and CO 2 pressure were conducted in a batch reactor to establish the sulfur removal characteristics in de-ionized water, nitric acid, and carbonic acid, respectively. The dissolution studies show that the leaching of sulfur from calcium sulfite hemihydrate, which is the predominant S phase, is rapid and achieves a concentration plateau within 5 min, and subsequently, appears to be controlled by the primary mineral solubility. Here, preferential S removal was sufficient to meet SCM standards (e.g., 5.0 wt% as per ASTM C618) using all three washing solutions with 0.62–0.72 selectivity (S^), defined as the molar ratio of S to Ca in the leachate, for a raw fly ash with bulk S^ = 0.3. Acid dissolution with 1.43 meq/g of ash or under 5 atm CO 2 retained > 18 wt% CaO and other Si-, Al-rich phases in the fly ash. Based on the experimental findings, two sulfur removal schemes were suggested for either integration with CO 2 capture and utilization processes using flue gas or to produce fly ash for use as a SCM.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Nitrate loading projection is sensitive to freeze-thaw cycle representation

Climate change can have substantial impacts on nitrogen runoff, which is a major cause of eutrophication, harmful algal blooms, and hypoxia in freshwaters and coastal regions. We examined responses of nitrate loading to climate change in the Upper Mississippi River Basin (UMRB) with an enhanced Soil and Water Assessment Tool with physically based Freeze-Thaw cycle representation (SWAT-FT), as compared with the original SWAT model that employs an empirical equation. Driven by future climate projections from five General Circulation Models (GCMs) from 1960 to 2099 under the Representative Concentrations Pathways (RCP) 8.5 scenario, we analyzed changes in riverine nitrate loadings, as well as terrestrial surface and subsurface contributions of the UMRB in the 21st century relative to the baseline period of 1960–1999. By the end of the 21st century, the original SWAT model predicted about a 50% increase in riverine nitrate loadings which is nearly twice as much as that estimated by SWAT-FT (ca. 25%). Such a large difference in projected nitrate changes can potentially mislead mitigation strategies that aim to reduce nitrogen runoff from the UMRB. Further analysis shows that the difference between the original SWAT model and SWAT-FT led to substantial discrepancies in the spatial distribution of surface and subsurface nitrate loadings in the UMRB. In general, SWAT-FT predicted more nitrate leaching for northwestern parts of the UMRB which are more sensitive to freeze-thaw cycle, mainly because SWAT-FT simulated less frequent frozen soils. This study highlights the importance of using physically based freeze-thaw cycle representation in water quality modeling. Design of future nitrogen runoff reduction strategies should include careful assessment of effects that land management has on the freeze-thaw cycles to provide reliable projection of water quality under climate change.

Wang, Qianfeng↗
DOE OSTI2022

Polydiketoenamines for a Circular Plastics Economy

The mismanagement and leakage of plastic waste into the environment are failures of modern society. Once in the environment, plastic waste degrades into microplastics on a time scale dependent on the resin chemistry and the associated biotic or abiotic process. Here, the high surface area of microplastics results in the contamination of ecosystems through the leaching of toxic chemicals compounded with plastics during manufacturing. In addition, the small size of microplastics increases the likelihood that they will be inhaled or ingested, which has led to the bioaccumulation of microplastics with documented harm. Furthermore, microplastics are more readily aerosolized and distributed by weather systems to areas remote from locations where plastic waste has been mismanaged. Consequently, the carbon cycle must now account for plastic waste discharge, degradation, and dispersal in the environment after the end of useful life on a global scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Flexible 2D Boron Imidazolate Framework for Polysulfide Adsorption in Lithium–Sulfur Batteries

We report the "polysulfide shuttle," a process initiated by the dissolution of polysulfides, is recognized to be one of the major failure mechanisms of lithium-sulfur (Li-S) batteries. Much research effort has been dedicated toward efficient cathode additives and host materials to suppress the leaching of polysulfide species. Herein, we report a new 2D metal-organic framework constituted by a tritopic ligand, boron imidazolate ([BH(Im) 3 ] - , Im = imidazole), and Co 2+ ions for lithium polysulfide adsorption. The cobalt imidazolate framework (CoN 6 -BIF) contains octahedrally coordinated Co centers that form two-dimensional layers in the a,b plane. Composite cathodes containing CoN 6 -BIF exhibited high sulfur utilization and capacity retention, resulting in improved specific capacity and cycle life compared to sulfur/carbon controls. Density functional theory (DFT) calculations suggest that CoN 6 -BIF linkers are rotationally flexible, allowing the framework to accommodate polysulfide in the expanded pores. This unusual property of BIFs opens up new avenues for exploring flexible metal-organic frameworks (MOFs) and their applications to energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

Corrosion of Ferrous Structural Alloys in Biomass Derived Fuels and Organic Acids

This work investigated the corrosivity of biomass-derived liquid fuels and organic acids associated with bio-oils and conducted a corrosion compatibility evaluation of several structural ferrous alloys in the fuels and acids. Here, the acidity parameters and solution conductivity values were higher in raw pyrolysis bio-oils than postprocessed oils with significant corrosion attack for carbon steel and Fe-2.25Cr-1Mo. However, higher-grade stainless steels, ferritic Fe-15Cr (15Cb) and austenitic types 304L and 316L, showed negligible corrosion loss, whereas lower-Cr ferritic grades 409, 410, and 416 were attacked. Metal leaching tests and electrochemical impedance spectroscopy measurements revealed superior corrosion resistance of 316 over 410 stainless steels in solutions of formic and oxalic acids that can be present in bio-oils. The corrosion evaluation methods utilized in this work provide effective screening tools to identify the compatible structural alloys for bio-oils.

09 BIOMASS FUELS↗
DOE OSTI2020

Chemical Speciation and Stability of Uranium in Unconventional Shales: Impact of Hydraulic Fracture Fluid

Uranium and other radionuclides are prominent in many unconventional oil/gas shales and is a potential contaminant in flowback/produced waters due to the large volumes/types of chemicals injected into the subsurface during stimulation. In this work, to understand the stability of U before and after stimulation, a geochemical study of U speciation was carried out on three shales (Marcellus, Green River, and Barnett). To do so, two types of samples for each shale were subjected to sequential chemical extractions: unreacted and shale-reacted with a synthetic hydraulic fracture fluid. Furthermore, a significant proportion of the total U (20–57%) was released from these three shales after reaction with fracture fluid, indicating that U is readily leachable. The total U released exceeds labile water-soluble and exchangeable fractions in unreacted samples, indicating that fluids leach more recalcitrant phases in the shale. Radiographic analysis of unreacted Marcellus shale thin sections shows U associated with detrital quartz and the clay matrix in the shale. Detrital zircon and TiO2 identified by an electron microprobe could account for the hot spots. This study shows that significant proportions of U in three shales are mobile upon stimulation. In addition, the extent of mobilization of U depends on the U species in these rocks.

58 GEOSCIENCES↗
DOE OSTI2022

Impacts of Forest Fire Ash on Aquatic Mercury Cycling

Mercury (Hg) is a ubiquitous contaminant in the environment and its methylated form, methylmercury (MeHg), poses a worldwide health concern for humans and wildlife, primarily through fish consumption. Global production of forest fire ash, derived from wildfires and prescribed burns, is rapidly increasing due to a warming climate, but their interactions with aqueous and sedimentary Hg are poorly understood. In this study, we compared the differences of wildfire ash with activated carbon and biochar on the sorption of aqueous inorganic Hg and sedimentary Hg methylation. Sorption of aqueous inorganic Hg was greatest for wildfire ash materials (up to 0.21 μg g ₋1 or 2.2 μg g ₋1 C) among all of the solid sorbents evaluated. A similar Hg adsorption mechanism for activated carbon, biochar made of walnut, and wildfire ash was found that involves the formation of complexes between Hg and oxygen-containing functional groups, especially the ₋COO group. Notably, increasing dissolved organic matter from 2.4 to 70 mg C L ₋1 remarkably reduced Hg sorption (up to 40% reduction) and increased the time required to reach Hg–sorbent pseudo-equilibrium. Surprisingly, biochar and wildfire ash, but not activated carbon, stimulated MeHg production during anoxic sediment incubation, possibly due to the release of labile organic matter. Overall, our study indicates that while wildfire ash can sequester aqueous Hg, the leaching of its labile organic matter may promote production of toxic MeHg in anoxic sediments, which has an important implication for potential MeHg contamination in downstream aquatic ecosystems after wildfires.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Manganese Oxidation States in Volcanic Soils across Annual Rainfall Gradients

Manganese (Mn) exists as Mn(II), Mn(III), or Mn(IV) in soils, and the Mn oxidation state controls the roles of Mn in numerous environmental processes. However, the variations of Mn oxidation states with climate remain unknown. Here we determined the Mn oxidation states in highly weathered bulk volcanic soils (primary minerals free) across two rainfall gradients covering mean annual precipitation (MAP) of 0.25–5 m in the Hawaiian Islands. With increasing MAP, the soil redox conditions generally shifted from oxic to suboxic and to anoxic despite fluctuating at each site; concurrently, the proportions of Mn(IV) and Mn(II) decreased and increased, respectively. Mn(III) was low at both low and high MAP, but accumulated substantially, up to 80% of total Mn, in soils with prevalent suboxic conditions at intermediate MAP. Mn(III) was likely hosted in Mn(III,IV) and iron(III) oxides or complexed with organic matter, and its distribution among these hosts varied with soil redox potentials and soil pH. Soil redox conditions and rainfall-driven leaching jointly controlled exchangeable Mn(II) in soils, with its concentration peaking at intermediate MAP. The Mn redox chemistry was at disequilibrium, with the oxidation states correlating with long-term average soil redox potentials better than with soil pH. The soil redox conditions likely fluctuated between oxic and anoxic conditions more frequently at intermediate than at low and high MAP, creating biogeochemical hot spots where Mn, Fe, and other redox-sensitive elements may be actively cycled.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H 2 O 2 ) by converting it into a hydroxyl radical ( • OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced • OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H 2 O 2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of • OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H 2 O 2 activation processes, such as those by ultraviolet light.

42 ENGINEERING↗
DOE OSTI2025

Complex Adsorption Behavior of Neodymium and Ytterbium on Structurally-Distinct Alumina Surfaces

New sources of rare earth elements (REEs) are needed to support a green energy transition. REEs adsorbed to aluminum-rich clays in weathering deposits represent important resources but the mechanisms responsible for their retention and ease of extraction are unresolved. Disordered coordination and co-occurrence of multiple species pose challenges to investigating REE adsorption processes via established spectroscopic methods. In this study, we applied element-specific surface crystallography methods to obtain a new perspective on the complexity of REE adsorption mechanisms and affinities. Alumina (001) and (012) crystal surfaces were utilized to evaluate surface-specific controls on Nd(III) and Yb(III) adsorption behavior. The REEs displayed similar total adsorption to alumina (001) as a mixture of inner- and outer-sphere complexes, but Nd displayed a greater proportion of inner-sphere binding. Adsorption of ordered inner- and outer-sphere REE species was substantially lower on alumina (012). These distinct behaviors reflect differences in the surface functional group charging and topography of the two surfaces. However, alumina (012) also hosted a substantial population of disordered adsorbed species, especially for Nd, potentially associated with Al vacancy surface defects. Here, the accumulation of light versus heavy REEs via adsorption in weathering deposits likely results from multiple, competing reactions affected by clay particle morphology. Leaching procedures for resource recovery should account for differential rates of desorption by coexisting inner- and outer-sphere REE surface complexes.

58 GEOSCIENCES↗