SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ionospheric electron density profiles with continuous gradients and underlying ionization corrections, discussing integral transformation properties, integral equation inversion and second order lamination process
The threshold law of the titled process, which is of the same form as that for electron-impact ionization of H, can experimentally be contaminated by simultaneous single photodetachment and Rydberg excitation of the residual atom, followed by ionization of the Rydberg atom by (room-temperature) blackbody photons. This gives a signal indistinguishable from direct double photodetachment. The correction is here calculated and shown to be finite at the double photodetachment threshold, and to have, possibly, an implication about the form of the threshold law itself. However, at room temperature its contribution is found to be small as it pertains to a recently initiated experiment at the Los Alamos Meson Physics Facility for available energies greater than a millivolt above threshold. The temperature dependence of the correction is shown to be large (k/B/T) to the 7/2; thus at higher temperatures the effect may be observable.
The Alfven critical velocity mechanism for ionization of a neutral gas streaming across the magnetic field has been demonstrated in laboratory experiments. In March 1983, two rocket-borne experiments with Ba and Sr tested the effect in the wall-less laboratory of space from Punto Lobos, Peru, near 430 km altitude. 'Star of Lima' used a conical Ba shaped charge aimed at an instrument payload about 2 km away. Because of rocket overperformance the detonation occurred in partial sunlight, so that less than 21.6 percent of the ionizing UV was present. Particle and field measurements indicate the production of hot electrons and waves in the energy and frequency range that are respectively predicted to produce a cascade of ionization by the Alfven mechanism. However, the ionization fluxes and wave energy density did not reach cascade levels, and optical observations indicate that only 2.5 to 5 x 10 to the 20th Ba ions were produced. A substantial portion and perhaps all of the ionization could have been produced by solar UV. The failure of the Alfven process in this experiment is not well understood.
Recent investigations of CO photoabsorption demonstrate that photodissociation longward of the ionization threshold at 88.5 nm occurs primarily through line absorptions rather than continuous processes. High-resolution photoabsorption cross sections for CO at rotational temperatures near 250 K have been constructed from the improved data on dissociating transitions. The effects of the new cross sections on the rate of solar photodissociation of CO in the thermosphere of Venus are examined, and the results are compared to values obtained with the lower resolution cross sections available previously. It is found that the photodissociation profile peaks slightly higher in the atmosphere and the peak value and integrated total rate both decrease by about a factor of two.
Monte Carlo techniques are used to study the energy deposition of gamma rays from the radioactive decay of Co-56 in Type Ib and Type II SN. It is found that above an electron fraction of about 0.1, direct excitations are negligible, and the line emission arises from thermal processes. The results indicate that the emission is dominated by neutral and singly ionized lines, including forbiden O I, forbidden Ca II, forbidden C I, and forbidden Si I. The late spectrum is shown to be useful as a diagnostic of the nucleosynthetic structure of the ejecta. The present model has been applied to observations of the Type Ib SN 1985F, and it is suggested that Type Ib SN come from stars of greater than 25 solar masses.
Apollo UV spectrometer experiment set limits on the density of oxygen of less than 500/cu cm, and the Apollo Lunar Atmospheric Composition Experiment data imply a value less than 50/cu cm above the subsolar point. These limits are surprisingly small relative to the measured value for sodium. A simple consideration of sources and sinks predicts significantly greater densities of oxygen. It is possible but doubtful that the Apollo measurements occurred during an epoch in which source rates were small. A preferential loss process for oxygen on the darkside of the moon is considered in which ionization by electron capture in surface collisions leads to escape through acceleration in the local electric field. Cold trapping in permanently shadowed regions as a net sink is considered and discounted, but the episodic nature of cometary insertion may allow formation of ice layers which act as a stabilized source of OH. On the basis of an assumed meteoroid impact source, a possible emission brightness of 50 R in the OH(A - X)(0,0) band above the lunar bright limb is predicted.
This paper presents calculations of radiative losses, which include the effects of geometry and optical depth, that can be used to improve the energy losses in many flux-tube calculations for loops with constant and variable cross sections. The results include the non-LTE ionization state of hydrogen and helium, thus allowing the determination of the ionization energy in the gas and the relative importance of collisional and radiative processes. These calculations show that optical depth effects are important under solar conditions in the temperature range of 8000-40,000 K.
The traditionally measured electric fields in the solar wind plasma (about 1-10 mV/m) are not the natural, primordial ones but are the result of plasma-vehicle interaction. The theory of this interaction is not complete now and current interpretation of the measurements can fail. The state of fully ionized plasma depends on the entropy of the creating source and on the process in which plasma is involved. The increasing twofold of a moving volume in the solar wind (with energy transfer across its surface which is comparable with its whole internal energy) is a more rapid process than the relaxation for the pressure. The presumptive source of the solar wind creation - the induction electric field of the solar origin - has very low entropy. The state of plasma must be very far from the state of thermodynamic equilibrium. The internal energy of plasma can be contained mainly in plasma waves, resonant plasma oscillations, and electric currents. The primordial microscopic oscillating electric fields could be about 1 V/m. It can be checked by special measurements, not ruining the natural plasma state. The tool should be a dielectrical microelectroscope outside the distortion zone of the spacecraft, having been observed from the latter.
Upon impact of the shockwaves generated by a supernova remnant, molecular gas and the associated dust grains are substantially excited and become prominent sources of infrared emission. Recent studies of such interactions, utilizing the infrared data and information from other wavelengths, have revealed many details of the physical processes in the interstellar medium. In particluar, the understanding of the temperature and ionization structures in the postshock material is helpful in modeling the star-gas cycles in the Galaxy, and probing the circumstances of star formation.
The purpose of this paper is to provide an overview of the current trends and practices in small-satellite software verification and validation. This document is not intended to promote a specific software assurance method. Rather, it seeks to present an unbiased survey of software assurance methods used to verify and validate small satellite software and to make mention of the benefits and value of each approach. These methods include simulation and testing, verification and validation with model-based design, formal methods, and fault-tolerant software design with run-time monitoring. Although the literature reveals that simulation and testing has by far the longest legacy, model-based design methods are proving to be useful for software verification and validation. Some work in formal methods, though not widely used for any satellites, may offer new ways to improve small satellite software verification and validation. These methods need to be further advanced to deal with the state explosion problem and to make them more usable by small-satellite software engineers to be regularly applied to software verification. Last, it is explained how run-time monitoring, combined with fault-tolerant software design methods, provides an important means to detect and correct software errors that escape the verification process or those errors that are produced after launch through the effects of ionizing radiation.
For the Orion Multi-Purpose Crew Vehicle (MPCV) project, NASA is minimizing the use of onboard diagnostics, especially external sensors that penetrate the structure. Nonetheless, there is a desire to measure the Thermal Protection System (TPS) recession during reentry. One noninvasive technique currently under investigation is the insertion of indicator metals into the heatshield at varied depths and spatial locations. A remote (airborne) spectrometer detects the emissions from the ionized metal to reveal the time (thus depth) of the metal release. Innovative processing enables the emission features from trace amounts of the selected metals to be reliably detected against the complex and structured spectral background of the shock layer and ablated TPS material. The con-cept has been proven viable through ground testing at NASA HyMETS and AHF arc jet facilities using the Orion TPS material (Avcoat). This presentation highlights the parametric testing that was conducted to select the optimal indicator metals and to assess the accuracy of remote recession measurements using this technique. The CONOPS for integrating the technique into the Orion flight tests is also presented. This includes the onboard indicator metal "seeded plugs" and the offboard airborne sensor platform that would be deployed.
The differences in chemistry, mineralogy, and structure of chondrites demonstrate thevariations in time/space of their forming regions in the solar nebula. In contrast, the variationof the organic reserves in the solar nebula is unclear. Furthermore, their subsequent evolutionof organic matter on the parent body is still under debate. In a previous study on Tagish Lake(C2 ungrouped) we showed that the primordial soluble organic matter (SOM) could bedistinguished from the parent body's secondary alteration threw mass distribution. This studywill show the Tarda meteorite SOM primordial distribution, using the model from ourprevious study. We discuss its organic reservoirs and secondary alteration effects. We alsocompare the character of the SOM with previously analysed Orgueil (CI). Sample and method: Tarda (fall, 2020) was classified as a C2 ungroup carbonaceouschondrite. Its bulk three oxygen isotope composition is distinct from other chondrite groupsbut similar to CI-chondrite-like and Yamato-type-like [1] values. We analysed themethanol/toluene extract using the high-resolution Orbitrap mass spectrometer at the Institutede Planétologie et d’Astrophysique Grenoble (IPAG) by directly injecting and ionizing theSOM and the solvent using the Heated Electrospray Ionization (HESI) source. After thespectra acquisition, the in-house developed post-processing data analysis tools, Attributor [2],was used. Preliminary Result: The SOM mass distribution of Tarda was well-fitted by the modelinterpreted as the primordial SOM distribution in Tagish lake. This common distributionpattern implies the presence of a common organic reservoir or SOM formation mechanism.Orgueil’s mass spectrum showed a more complex mass-distribution and seemed to be affectedby secondary processes. In contrast to the mass-distribution, SOM’s elemental abundance wasdistinct. The Tarda extract was enriched in S-bearing organic compounds which was incontrast to the Tagish Lake extract consisting of mostly CHNO elements. The presentationwill also discuss the application of our technique to Ryugu or Bennu samples. [1] Meteoriticalbulletin database [2] Orthous-Daunay, F. R. et al. (2019) Geochemical Journal, 53(1), 21-32
Determination of wind velocity by means of Doppler meteor radars is based on the assumption that an ionized meteor trail drifts together with the neutral atmosphere. From the Doppler frequency shift it is possible to estimate the radial velocity of the trail drift. Conversion of the recorded radial velocity to the true wind velocity vector in the given space region depends both on the radar technical parameters and the chosen atmospheric motion model. The atmospheric dynamic processes structure is considered.
A number of active galaxies are now known at very large redshifts, some of them even have properties suggestive of galaxies in the process of formation. They commonly show strong Ly-alpha emission, at least some of which appears to be ionized by young stars. Inferred star formation rates are in the range approximately = 100-500 solar mass/yr. An important question is: are there radio-quiet, field counterparts of these systems at comparable redshifts? Whereas, we are probably already observing some evolutionary and formative processes of distant radio galaxies, the ultimate goal is to observe normal galaxies at the epoch when most of their stars form. We have, thus, started a search for emission-line objects at large redshifts, ostensibly young and forming galaxies. Our method is to search for strong line emission (hopefully Ly alpha) employing two techniques: a direct, narrow-band imaging search, using a Fabry-Perot interferometer; and a serendipitous long-slit spectroscopic search.
Abiogenic synthesis of protobiochemicals in hydrothermal model system under influence of ionizing radiation
It is found that the line width of the excitation spectrum for multiphoton ionization is broadened much more severely than the cascade fluorescence originating from the resonant intermediate level. These results derive from the mutual effects of the ionizing and resonating transitions, which are not properly accounted for in perturbative treatments. In general, the ionization line shape can be expressed as the sum of two Lorentzian components, each with different degrees of broadening. This line shape reduces to that of the resonating transition in the limit of vanishing intensities. Moreover, the fluorescence line shape may also exhibit a second component whose amplitude may become important under certain conditions.
Many environments in space contain very low temperature mixed molecular ices that are exposed to ionizing radiation in the form of cosmic rays and high-energy photons. While traditional chemistry would not be expected to occur at the temperatures typical of these ices (T < 50 K), ionizing radiation can break bonds in the original molecules in the ices to form highly reactive ions and radicals. These ions and radicals are subsequently free to react despite the low temperatures of the original ices. Laboratory experiments, many of them carried out at the Astrochemistry Laboratory at NASA-Ames, show that the irradiation of ices made of even simple molecules like H2O, CO, CO2, CH4, NH3, etc. can result in the robust formation of large numbers of far more complex organic compounds. Many of these new products are of direct interest to astrobiology. For example, the irradiation of mixed molecular ices has been shown to produce amino acids, amphiphiles, quinones, sugars, heterocyclic compounds, and nucleobases, all molecular building blocks used by terrestrial life. Insofar as the presence of these materials plays a role in the origin of life on planets, this has profound implications for the potential abundance of life in the universe since these experiments simulate universal conditions that are expected to be found wherever new stars and planets form.
Rhenium, with its high melting temperature, excellent elevated temperature properties, and lack of a ductile-to-brittle transition temperature (DBTT), is ideally suited for the hot gas components of the ACM (Attitude Control Motor), and other high-temperature applications. However, the high cost of rhenium makes fabricating these components using conventional fabrication techniques prohibitive. Therefore, near-net-shape forming techniques were investigated for producing cost-effective rhenium and rhenium alloy components for the ACM and other propulsion applications. During this investigation, electrochemical forming (EL-Form ) techniques were evaluated for producing the hot gas components. The investigation focused on demonstrating that EL-Form processing techniques could be used to produce the ACM flow distributor. Once the EL-Form processing techniques were established, a representative rhenium flow distributor was fabricated, and samples were harvested for material properties testing at both room and elevated temperatures. As a lower cost and lighter weight alternative to an all-rhenium component, rhenium- coated graphite and carbon-carbon were also evaluated. The rhenium-coated components were thermal-cycle tested to verify that they could withstand the expected thermal loads during service. High-temperature electroforming is based on electrochemical deposition of compact layers of metals onto a mandrel of the desired shape. Mandrels used for electro-deposition of near-net shaped parts are generally fabricated from high-density graphite. The graphite mandrel is easily machined and does not react with the molten electrolyte. For near-net shape components, the inner surface of the electroformed part replicates the polished graphite mandrel. During processing, the mandrel itself becomes the cathode, and scrap or refined refractory metal is the anode. Refractory metal atoms from the anode material are ionized in the molten electrolytic solution, and are deposited onto the cathodic mandrel by electrochemical reduction. Rotation of the mandrel ensures uniform distribution of refractory material. The EL-Form process allows for manufacturing in an inert atmosphere with deposition rates from 0.0004 to 0.002 in./h (10.2 to 50.8 m/h). Thicknesses typically range from microns to greater than 0.5 in. (13 mm). The refractory component produced is fabricated, dependably, to within one micron of the desired tolerances with no shrinkage or distortion as in other refractory metal manufacture techniques. The electroforming process has been used to produce solid, nonporous deposits of rhenium, iridium, niobium, tungsten, and their alloys.