Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inverter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Application and sensitivity investigation of Fourier transforms for microwave radiometric inversions

Existing microwave radiometer technology now provides a suitable method for remote determination of the ocean surface's absolute brightness temperature. To extract the brightness temperature of the water from the antenna temperature equation, an unstable Fredholm integral equation of the first kind was solved. Fast Fourier Transform techniques were used to invert the integral after it is placed into a cross-correlation form. Application and verification of the methods to a two-dimensional modeling of a laboratory wave tank system were included. The instability of the Fredholm equation was then demonstrated and a restoration procedure was included which smooths the resulting oscillations. With the recent availability and advances of Fast Fourier Transform techniques, the method presented becomes very attractive in the evaluation of large quantities of data. Actual radiometric measurements of sea water are inverted using the restoration method, incorporating the advantages of the Fast Fourier Transform algorithm for computations.

Holmes, J. J.↗
NASA NTRS1975

Development of a breadboard design of a high-performance, high-reliability switching regulator

A comparison of two potential conversion methods, the series inverter and the inductive energy transfer (IET) conversion technique, is presented. The investigations showed that a characteristic of the series inverter circuit (high equalizing current values in each half cycle) could not be accomplished with available components, and the investigations continued with the IET circuit only. An IET circuit system was built with the use of computer-aided design in a 2, 4, and 8 stage configuration, and these stages were staggered 180, 90, and 45 degrees, respectively. All stages were pulsewidth modulated to regulate over an input voltage range from 200 to 400 volts dc at a regulated output voltage of 56 volts. The output power capability was 100 to 500 watts for the 2 and 8 stage configuration and 50 to 250 watts for the 4 stage configuration. Equal control of up to eight 45 degree staggered stages was accomplished through the use of a digital-to-analog control circuit. Equal power sharing of all stages was achieved through a new technique using an inductively coupled balancing circuit. Conclusions are listed.

Lindena, S. J.↗
NASA NTRS1975

Electron angular distributions above the dayside auroral oval

An electrostatic analyzer was employed on the Ariel 4 satellite to determine pitch angle distributions of electron intensities over the dayside auroral oval. Two major precipitation zones were encountered: an equatorward zone of broad spectra with intensities of approximately 1000 electrons/(sq cm-sec-sr-eV) and a poleward zone, the polar cusp, with intensities typical of those of the magnetosheath. Angular distributions within the equatorward zone are generally isotropic outside of the atmospheric backscatter cone. The precipitation mechanism appears to be pitch angle scattering near the distant magnetic equator. In contrast, pitch angle distributions within the polar cusp are often found to be strongly field aligned with intensities within the atmospheric loss cone greater by factors of approximately 10 than the mirroring intensities. These distributions are qualititatively similar to those for the inverted V precipitation events at later local times, and probably share a common acceleration mechanism with the inverted V phenomenon.

Craven, J. D.↗
NASA NTRS1976

A study of satellite remote measurements of stratospheric aerosol and gas parameters using the solar occultation technique

Satellite remote measurements of stratospheric aerosol and ozone profiles using the solar occultation approach were analyzed based on the known properties of the atmospheric parameters. Atmospheric refraction effects which are important in this experiment were determined analytically. Different inversion techniques were developed based on inverting simulated irradiance data. It was shown that aerosol and ozone profiles in the stratosphere can be inverted from the irradiance measurements to an accuracy of better than 10 percent.

Chu, W. P.↗
NASA NTRS1976

Experimental investigation of a double-diffused MOS structure

Self-aligned polysilicon gate technology was applied to double-diffused MOS (DMOS) construction in a manner that retains processing simplicity and effectively eliminates parasitic overlap capacitance because of the self-aligning feature. Depletion mode load devices with the same dimensions as the DMOS transistors were integrated. The ratioless feature results in smaller dimension load devices, allowing for higher density integration with no increase in the processing complexity of standard MOS technology. A number of inverters connected as ring oscillators were used as a vehicle to test the performance and to verify the anticipated benefits. The propagation time-power dissipation product and process related parameters were measured and evaluated. This report includes (1) details of the process; (2) test data and design details for the DMOS transistor, the load device, the inverter, the ring oscillator, and a shift register with a novel tapered geometry for the output stages; and (3) an analytical treatment of the effect of the distributed silicon gate resistance and capacitance on the speed of DMOS transistors.

Lin, H. C.↗
NASA NTRS1976

Auroral vector electric field and particle comparisons. 1: Pre-midnight convection topology

Polar 3 was launched in northern Norway on January 27, 1974. Traversing nearly 3 deg latitude, the rocket crossed over a stable IBC II auroral arc in the positive bay region and continued north to a convection boundary which was identified as the Harang discontinuity. Measurement of the complete electric field vector, of energetic electrons and of the auroral N+2 and OI emissions were used to study the convection topology in the pre-magnetic-midnight region. A strong anticorrelation was observed between the electric field and the precipitating energetic electrons. The inverted V nature of the electron precipitations at the convection boundary, compared with the lack of such structure over the arc which was within the positive bay region, leads to the conclusion that auroral arcs are likely to be associated with inverted V type precipitation only at or poleward of convection boundaries and their eddy structures.

Maynard, N. C.↗
NASA NTRS1976

Characteristics of auroral electron acceleration regions observed by Atmosphere Explorer C

Satellite measurements of electron precipitation and ion drift velocities showed that electron acceleration regions (or inverted V's) in the 1200 to 1800 MLT quadrant exhibit the following systematic behavior: electron distribution functions in the accelerated region can be well described by Maxwellian primary electron beams accelerated through an electrostatic potential; the typical inverted V latitudinal structure is always observed in the accelerated regions, the electrostatic potential reaching a maximum and consequently decreasing to near zero over distances of 100 to 250 km; the Maxwellian temperature of the primary electron beam increases systematically with increasing electrostatic potential; rather weak acceleration regions, characterized by values of the electrostatic potential below 1 keV and values of the Maxwellian temperature between 100 and 350 eV, occur in the cusp and in the highest-latitude portion of the dusk side electron precipitation zone.

Burch, J. L.↗
NASA NTRS1976

Properties of spikelike shear flow reversals observed in the auroral plasma by Atmosphere Explorer C

A study of the characteristics of pairs of oppositely directed spikes in ionospheric convection velocities (or shear flow reversals), as first described by Gurnett, has been conducted by using data from Atmosphere Explorer C. These phenomena tend to occur near the large-scale reversal from sunward to antisunward convection on the nightside of the earth. Generally, the spikelike shear flow reversals involve electric field components along the spacecraft orbit that are directed toward the region between them, in which inverted V type electron precipitation is observed. This relationship between the electron precipitation and the electric field spikes is consistent with an upward-flowing field-aligned current that is fed by Pedersen currents from the adjacent regions of strong convection. In one case a divergent equivalent electric field structure was observed, that is, with the spikelike electric fields pointing away from the region in between, which in this case exhibited a sharp electron flux dropout. This opposite configuration may be an example of counterparts to inverted V structures existing in regions of downward-flowing field-aligned currents.

Burch, J. L.↗
NASA NTRS1976

Definition study for photovoltaic residential prototype system

A parametric sensitivity study and definition of the conceptual design is presented. A computer program containing the solar irradiance, solar array, and energy balance models was developed to determine the sensitivities of solar insolation and the corresponding solar array output at five sites selected for this study as well as the performance of several solar array/battery systems. A baseline electrical configuration was chosen, and three design options were recommended. The study indicates that the most sensitive parameters are the solar insolation and the inverter efficiency. The baseline PST selected is comprised of a 133 sg m solar array, 250 ampere hour battery, one to three inverters, and a full shunt regulator to limit the upper solar array voltage. A minicomputer controlled system is recommended to provide the overall control, display, and data acquisition requirements. Architectural renderings of two photovoltaic residential concepts, one above ground and the other underground, are presented. The institutional problems were defined in the areas of legal liabilities during and after installation of the PST, labor practices, building restrictions and architectural guides, and land use.

Imamura, M. S.↗
NASA NTRS1976

An algorithm for constructing minimal order inverses

In this paper an algorithm is presented for constructing minimal order inverses of linear, time invariant, controllable and observable, multivariable systems. By means of simple matrix operations, a 'state-overdescribed' system is first constructed which is an inverse of the given multivariable system. A simple Gauss-Jordan type reduction procedure is then used to remove the redundancy in the state vector of the inverse system to obtain a minimal order inverse. When the given multivariable system is not invertible, the algorithm enables a minimal order inverse of an invertible subsystem to be constructed. Numerical examples are given to illustrate the use of the algorithm.

Patel, R. V.↗
NASA NTRS1977

Auroral vector electric field and particle comparisons. I - Preliminary convection topology

Data obtained by Polar 3, launched from northern Norway January 27, 1974, are interpreted. The rocket, which traversed nearly 3 deg of latitude, crossed over a stable IBC II auroral arc in the positive bay region and continued north to a convection boundary which has been identified as the Harang discontinuity. Measurements of the complete electric field vector, of energetic electrons, and of auroral emissions were used to study the convection topology in the premagnetic midnight region. The inverted V nature of the electron precipitations at the convection boundary, compared with the lack of such structure over the arc which was within the positive bay region, is thought to indicate that auroral arcs are likely to be associated with inverted V type precipitation only at or poleward of convection boundaries and their eddy structures.

Maynard, N. C.↗
NASA NTRS1976

Substorm effects observed in the auroral plasma

The effects of substorm temporal development on high-latitude particle precipitation and ionospheric convection patterns near midnight were studied with the aid of data from Atmosphere Explorer C. During quiet periods generally Maxwellian electron precipitation is observed from the central plasma sheet, which is completely contained within the sunward flow region. As substorms grow and begin to recover, a strong sunward flow appears within the high latitude ionospheric electron trough, equatorward of the central plasma sheet electron precipitation. Intense inverted-V electron structures consistent with strong electrostatic acceleration appear near the Harang discontinuity and extend poleward to the polar cap boundary. Then the trough flow weakens, the Harang discontinuity becomes a gradual reversal, and the electron inverted-V precipitation becomes localized at the polar cap boundary.

Burch, J. L.↗
NASA NTRS1977

Design and evaluation of a toroidal wheel for planetary rovers

The inverted toroidal wheel concept was perceived, mathematically quantified, and experimentally verified. The wheel design has a number of important characteristics, namely; (1) the low footprint pressures required for Mars exploration (0.5 to 1.0 psi); (2) high vehicle weight to wheel weight ratios capable of exceeding 10:1; (3) extremely long cyclic endurances tending towards infinite life; and (4) simplicity of design. The concept, in combination with appropriate materials such as titanium or composites, provides a planetary roving vehicle with a very high degree of exploratory mobility, a substantial savings in weight and a high assurity of mission success. Design equations and computation procedures necessary to formulate an inverted wheel are described in detail.

Koskol, J.↗
NASA NTRS1977

Electric prototype power processor for a 30cm ion thruster

An electrical prototype power processor unit was designed, fabricated and tested with a 30 cm mercury ion engine for primary space propulsion. The power processor unit used the thyristor series resonant inverter as the basic power stage for the high power beam and discharge supplies. A transistorized series resonant inverter processed the remaining power for the low power outputs. The power processor included a digital interface unit to process all input commands and internal telemetry signals so that electric propulsion systems could be operated with a central computer system. The electrical prototype unit included design improvement in the power components such as thyristors, transistors, filters and resonant capacitors, and power transformers and inductors in order to reduce component weight, to minimize losses, and to control the component temperature rise. A design analysis for the electrical prototype is also presented on the component weight, losses, part count and reliability estimate. The electrical prototype was tested in a thermal vacuum environment. Integration tests were performed with a 30 cm ion engine and demonstrated operational compatibility. Electromagnetic interference data was also recorded on the design to provide information for spacecraft integration.

Biess, J. J.↗
NASA NTRS1978

An inverter/controller subsystem optimized for photovoltaic applications

Conversion of solar array dc power to ac power stimulated the specification, design, and simulation testing of an inverter/controller subsystem tailored to the photovoltaic power source characteristics. Optimization of the inverter/controller design is discussed as part of an overall photovoltaic power system designed for maximum energy extraction from the solar array. The special design requirements for the inverter/ controller include: a power system controller (PSC) to control continuously the solar array operating point at the maximum power level based on variable solar insolation and cell temperatures; and an inverter designed for high efficiency at rated load and low losses at light loadings to conserve energy.

Pickrell, R. L.↗
NASA NTRS1977

Solar photovoltaic power stations

The subsystems of a solar photovoltaic central power system are identified and the cost of major components are estimated. The central power system, which would have a peak power capability in the range of 50 to 1000 MW, utilizes two types of subsystems - a power conditioner and a solar array. Despite differences in costs of inverters, the overall cost of the total power conditioning subsystem is about the same for all approaches considered. A combination of two inverters operating from balanced dc buses as a pair of 6-pulse groups is recommended. A number of different solar cell modules and tracking array structures were analyzed. It is concluded that when solar cell costs are high (greater than $500/kW), high concentration modules are more cost effective than those with low concentration. Vertical-axis tracking is the most effective of the studied tracking modes. For less expensive solar cells (less than $400/kW), fixed tilt collector/reflector modules are more cost effective than those which track.

Chowaniec, C. R.↗
NASA NTRS1980

Determination of the complex refractive index and size distribution of atmospheric particulates from bistatic-monostatic lidar and solar radiometer measurements

A method is presented for inferring both the size distribution and the complex refractive index of atmospheric particulates from combined bistatic-monostatic lidar and solar radiometer observations. The basic input measurements are spectral optical depths at several visible and near-infrared wavelengths as obtained with a solar radiometer and backscatter and angular scatter coefficients as obtained from a biostatic-monostatic lidar. The spectral optical depth measurements obtained from the radiometer are mathematically inverted to infer a columnar particulate size distribution. Advantage is taken of the fact that the shape of the size distribution obtained by inverting the particulate optical depth is relatively insensitive to the particle refractive index assumed in the inversion. Bistatic-monostatic angular scatter and backscatter lidar data are then processed to extract an optimum value for the particle refractive index subject to the constraint that the shape of the particulate size distribution be the same as that inferred from the solar radiometer data. Specifically, the scattering parameters obtained from the bistatic-monostatic lidar data are compared with corresponding theoretical computations made for various assumed refractive index values. That value which yields best agreement, in a weighted least squares sense, is selected as the optimal refractive index estimate. The results of this procedure applied to a set of simulated measurements as well as to measurements collected on two separate days are presented and discussed.

Reagan, J. A.↗
NASA NTRS1980

Power processing technology for spacecraft primary ion propulsion

Advanced technologies developed in support of Ion Propulsion power processing, including the power circuitry portion of the Series L-C Resonant Inverter, Beam Supply, power components, packaging and heat pipe cooling of the 30 cm Ion Engine Power Processor are described. Both the transistorized and SCR versions of the Series L-C Resonant Inverter Beam Supply are discussed. A BIMOD Ion Thruster/Power Processor Prototype Assembly is undergoing environmental and life testing. These advanced technologies can be applied advantageously to other applications of future high power space power processing equipment.

Biess, J. J.↗