Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inspires”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

AstroPix: ATLAS-Inspired Silicon Pixels for Future Space-Based Gamma-ray Telescopes

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to measure the position of incident gamma-rays with high resolution. At lower energies, two dimensional position information within a single detector is required. This talk investigates the use of monolithic CMOS active pixel silicon sensors –AstroPix – as a novel technology for use in future gamma-ray telescopes. Based upon detectors designed for use in the ATLAS detector at the LHC, AstroPix has the potential to maintain the high energy and angular resolution required of a medium-energy gamma-ray telescope while reducing noise with the dual detection and readout capabilities of a CMOS chip. The status of AstroPix development and testing, as well as outlook for application in future telescopes such as the proposed medium-energy gamma-ray telescope AMEGO-X, will be presented.

Amanda L. Steinhebel↗
NASA NTRSDate not supplied

The Virginia Earth System Science Scholars (VESSS) Experience: Inspiring High School Students in Stem Through Mentorship and Collaborative Skills Development

Since 2016, the Virginia Earth System Science Scholars (VESSS) program offered by the Virginia Space Grant Consortium (VSGC) has provided an interactive science, technology, engineering, and mathematics learning experience for Virginia high school juniors and seniors. The VESSS program was created through a partnership with VSGC, NASA Langley Research Center (LaRC), and Hampton University to engage students in learning about Earth’s climate change and its global impacts. High school students from all areas of Virginia learn about Earth science and climate change in a 16 week online course focused on the Earth’s surface and interior, atmospheric composition, weather, water energy cycles, and climate variability. Students that complete the online course are invited to a no-cost seven-day residential summer academy at NASA LaRC where students are divided into teams based on four of the major spheres of study for Earth: atmosphere, biosphere, hydrosphere, and lithosphere. Each team is guided by a Master Teacher and teams of undergraduate student interns who were also previous VESSS scholars. Students interview for team positions and are given a role reflecting an actual satellite design team position such as project scientist, research scientist, budget analyst, launch and orbit analyst, contamination analyst, and education and public outreach specialist. The students spend a week mentored by NASA and industry scientists and engineers as they learn how to select science goals and objectives, select science instruments, balance a mission budget, determine the mission launch location and orbit, and communicate the importance of the mission to the public. Each team produces a mission proposal, and at the end of the week, each team presents their portion of the mission to a panel of experts, followed by a question and answer period. Through this week students learn teamwork, communication, time management, meeting management, and research skills. Project work is supplemented by team-building activities, NASA facility tours, and lectures by acclaimed guest speakers such as Dr. Christine Darden, a NASA “Hidden Figure.” Students have conveyed through course evaluations and testimonials not only the vast personal learning and growth they achieved, but also the new perspectives they gained on future STEM career fields and opportunities to explore.

Elaine Seasly↗
NASA NTRSDate not supplied

Future Airspace Operations: UTM-Inspired Air Traffic Management

We need to prepare airspace system to accommodate diversity, density and complexity of future operations. Current system will reach its peak due to use of old technology and human-in-the-loop nature to accommodate new entrants. Talk will focus on how an ATM system can be made ready to meet the future needs. Author will discuss a number of lessons based on Unmanned Aircraft System Traffic Management (UTM) could be leveraged to prepare for future.

future airspace operations↗
NASA NTRS2014

Testing Mars Exploration Rover-Inspired Operational Strategies for Semi-Autonomous Rovers on the Moon Ii: the GeoHeuristic Operational Strategies Test in Alaska

We used MER-derived semi-autonomous rover science operations strategies to determine best practices suitable for remote semi-autonomous lunar rover geology. Two field teams studied two glacial moraines as analogs for potential ice-bearing lunar regolith. At each site a Rover Team commanded a human rover to execute observations based on common MER sequences; the resulting data were used to identify and characterize targets of interest. A Tiger Team followed the Rover Team using traditional terrestrial field methods, and the results of the two teams were compared. Narrowly defined goals that can be addressed using cm-scale or coarser resolution may be met sufficiently by the operational strategies adapted from MER survey mode. When reconnaissance is the primary goal, the strategies tested are necessary but not sufficient. Further, there may be a set of optimal observations for such narrowly defined, hypothesis-driven science goals, such that collecting further data would result in diminishing returns. We confirm results of previous tests that indicated systematic observations might improve efficiency during strategic planning, and improve science output during data analysis. This strategy does not markedly improve the rate at which a science team can ingest data to feed back into tactical decision-making. Other methods should be tested to separate the strategic and tactical processes, and to build in time for data analysis.

MER↗
NASA NTRSDate not supplied

Investigation of Lunar-Inspired Geopolymer Concrete Formulations Mixed and Cured in Microgravity on the International Space Station (ISS)

The research outlined in this presentation investigates the use of various lunar regolith simulants in geopolymer lunar concrete mixes mixed and cured on the International Space Station (ISS). The motivation for this work is to study the effects of gravity on the microstructure of alkali-activated materials cured with heat, and to develop materials for the construction of long-term infrastructure on the lunar surface with in-situ resource utilization (ISRU). ISRU for construction materials reduces the cost and mass of payloads related to lunar construction. The advantage of geopolymer concrete as opposed to traditional portland cement concrete is that water acts as a medium for the polymerization reaction and leaves the system throughout the process, reducing its demand. Twelve samples of lunar regolith simulant and a solution composed of sodium hydroxide and sodium silicate were sent to the ISS. The three simulants were OPRH2N, OPRL2N, and JSC-1AF, using only particles less than 53 µm in diameter to increase reactivity of the simulant. Simulant to solution ratios were determined by workability while mixing. The simulant and solution were sealed Burst Pouches® along with 2 other sealed bags to prevent material from leaking. Crew member F-14 conducted testing on the ISS by introducing the solution to the simulant in the Burst Pouch®, mixing the sample with a spatula, and then clamping the specimen in the fresh state to prevent flow inside the Burst Pouch®. These specimens were then put in a thermos heated to 80C via sealed drinking water bags to cure for 24 hours with a temperature logger. The cured specimens remained in microgravity for at least 28 days and were returned from the ISS in February 2025. The specimens were then brought to the NASA Marshall Space Flight Center (MSFC) to analyze. Material characterization consisted of conducting Micro-CT tests of entire samples in their sealed apparatus to a resolution of 25µm. 2D image slices were saved in each orthogonal direction of each specimen at a 0.03 mm step size from the 3D model to conduct analytical porosity calculations. Representative samples from each specimen were sampled to perform helium gas pycnometery and were then mounted in resin for SEM imaging, EDS, and nanoindentation. Porosity was analyzed analytically using micromechanics modelling with the assistance of the NASA Multiscale Analysis Tool (NASMAT), as well as the NASA Advanced Supercomputing (NAS) servers (V. Saseendran & N. Yamamoto, 2024). Density was measured using helium gas pycnometery and was then compared to the theoretical density for experimental porosity calculation. Due to the samples’ non-uniform shape being cured in a pouch, traditional compression and tensile strength testing could not be performed. Nanoindentation was conducted at Clarkson University to determine the microhardness and reduced modulus of elasticity. Results from flight samples can be compared to ground samples currently in DLR’s possession to determine the effect on microstructure from being mixed and cured in microgravity. This study gives further insight and understanding of geopolymer lunar concrete and its viability as a lunar construction material with ISRU.

Adam Johnson↗
DOE OSTI2020

Retinal-inspired method and system for improved detection

The present disclosure provides a method and device for filtering sensor data. Signals from an array of sensor pixels are received and checked for changes in pixel values. Motion is detected based on the changes in pixel values, and motion output signals are transmitted to a processing station. If the sum of correlated changes in pixel values across a predetermined field of view exceeds a predetermined value, indicating sensor jitter, the motion output signals are suppressed. If a sum of motion values within a defined subsection of the field of view exceeds a predetermined threshold, indicating the presence of a large object of no interest, the motion output signals are suppressed for that subsection.

42 ENGINEERING↗