Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISLANDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Using Remote Sensing Data and Research Results for Urban Heat Island Mitigation

This paper provides information on the characteristics of the urban heat island, research designed to provide the data needed to develop effective urban heat island reduction strategies, and the development of local working groups to develop implementation plans. As background, an overview of research results on the urban heat island phenomenon and the resultant effect on energy usage and air quality will be explored. The use of more reflective roofing materials, paving materials, tree planting, and other initiatives will be explored as a basis for strategies to mitigate urban heat islands and improve the urban environment. Current efforts to use aircraft remote sensing data in Atlanta, Baton Rouge, Sacramento, and Salt Lake City and our work with non-profit organizations designated to lead public education and strategic development efforts will be presented. Efforts to organize working groups comprised of key stakeholders, the process followed in communicating research results, and methodology for soliciting feedback and incorporating ideas into local plans, policies and decision-making will be discussed. Challenges in developing and transferring data products and research results to stakeholders will be presented. It is our ultimate goal that such efforts be integrated into plans and/or decision models that encourage sustainable development.

Estes, Maury↗

The Urban Heat Island Phenomenon and Potential Mitigation Strategies

A survey of urban heat island research is provided to describe how heat islands develop, urban landscape and meteorological characteristics that facilitate development, use of aircraft remote sensing data, and why heat islands are of interest to planners, elected officials, and the public. The roles of the National Aeronautics and Space Administration (NASA), the Environmental Protection Agency (EPA), other federal agencies, national laboratories and universities, state and local governments, and non-governmental organizations (NGOS) in studying the urban heat island effect and developing mitigation strategies are explored. Barriers that hamper mitigation efforts and case studies in Atlanta and Salt Lake City are discussed.

Estes, Maurice G., Jr.↗

Crustal Deformation and the Seismic Cycle across the Kodiak Islands, Alaska

The Kodiak Islands are located approximately 130 to 250 km from the Alaska-Aleutian Trench where the Pacific plate is underthrusting the North American plate at a rate of about 57 mm/yr. The southern extent of the 1964 Prince William Sound (${M-w}$ = 9.2) earthquake rupture occurred offshore and beneath the eastern portion of the Kodiak Islands. Here we report GPS results (1993-2001) from northern Kodiak Island that span the transition between the 1964 uplift region along the eastern coast and the region of coseismic subsidence further inland. The horizontal velocity vectors range from 22.9 $\pm$ 2.2 mm/yr at N26.3$\deg$W $\pm$ 2.5$\deg$, about 150 km from the trench, to 5.9 $\pm$ 1.3 mm/yr at N65.9$\deg$W $\pm$ 6.6$\deg$, about 190 km from the trench. Near the northeastern coast of Kodiak the velocity vector above the shallow, locked main thrust zone is between the orientation of PCFC-NOAM plate motion (N22$/deg$W) and the trench-normal (N3O$\deg$W). Further west, our geodetic results suggest the accumulation of shear strain that will be released eventually as left-lateral motion on upper plate faults such as the Kodiak Island fault. These results are consistent with the hypothesis that the difference between the Pacific-North American plate motion and the orientation of the down going slab would lead to 4-8 mm/yr of left-lateral slip. Short-term geodetic uplift rates range from 2 - 14 mm/yr, with the maximum uplift located near the axis of maximum subsidence during the 1964 earthquake. We evaluated alternate interseismic models for Kodiak to test the importance of various mechanisms responsible for crustal deformation rates. These models are based on the plate interface slip history inferred from earlier modeling of coseismic and post-seismic geodetic results. The horizontal (trench perpendicular) and vertical deformation rates across Kodiak are consistent with a model that includes the viscoelastic response to : (1) a downgoing Pacific plate interface that is locked at shallow depths,(2) coseismic slip in the 1964 and (3) interseismic creep below the seismogenic zone. The change in orientation of the horizontal velocity vector occurs down-dip from the locked main thrust zone. In southern Kodiak, the coseismic slip in the 1964 earthquake was smaller than in the northern Kodiak region; yet, the horizontal, interseismic velocities as a function of distance from the trench are comparable to those in northern Kodiak. Based on the earthquake history prior to, and following the 1964 earthquake, we hypothesize that the plate interface in southern Kodiak slips in more frequent large earthquakes than in northern Kodiak.

Sauber, Jeanne↗

Effect of Gravity Waves from Small Islands in the Southern Ocean on the Southern Hemisphere Atmospheric Circulation

The effect of small islands in the Southern Ocean on the atmospheric circulation in the Southern Hemisphere is considered with a series of simulations using the NASA Goddard Earth Observing System Chemistry-Climate Model in which the gravity wave stress generated by these islands is increased to resemble observed values. The enhanced gravity wave drag leads to a 2 K warming of the springtime polar stratosphere, partially ameliorating biases in this region. Resolved wave drag declines in the stratospheric region in which the added orographic gravity waves deposit their momentum, such that changes in gravity waves are partially compensated by changes in resolved waves, though resolved wave drag increases further poleward. The orographic drag from these islands has impacts for surface climate, as biases in tropospheric jet position are also partially ameliorated. These results suggest that these small islands are likely contributing to the missing drag near 60 degrees S in the upper stratosphere evident in many data assimilation products.

chemistry-climate models↗

Coastal Land Change Due to Tectonic Processes and Implications for Relative Sea-Level Rise in the Samoan Islands

Of the major coastal land change mechanisms responsible for relative sea-level change, tectonic subsidence is generally quoted as ranging from < mm/yr to 1 cm/yr. However, we documented coseismic and ongoing post-earthquake surface displacements from continuous GPS and tide gauge/altimetry data that indicated rapid subsidence on two of the major Samoan Islands of 12 - 20 cm during and following the 8.1 2009 Tonga-Samoa earthquake. Earlier results and our modeling of GRACE-derived gravimetric data provided a preliminary forecast of future relative sea-level rise through rapid land subsidence [Han et al., 2019]. Of course these numerical forecasts of time-dependent deformation are only as good as our input observations and our assumed rheological models. As part of our current NASA Earth Surface and Interior study, we are obtaining a wider range of data to constrain and test alternate models of ongoing postseismic deformation across American Samoa and Upolu, Samoa: (1) times series of altimetry plus tide gauge data processed to complement the cGPS data available to provide high-temporal resolution, point measurements of uplift/subsidence, (2) InSAR derived observations of surface deformation across the highly vegetated Samoan Islands, (3) evaluating and using NASA satellite lidar data (ICESat-I & ICESat-II, GEDI) for fusion with multi-source topographic data sets and for estimating topographic change on the decadal time scale. We are evaluating and using these new observations to better understand and separate out local, island-wide, and multi-island subsidence patterns and to evaluate the high impact of rising sea-level in a tectonically active region.

Jeanne Sauber-Rosenberg↗

Maldives Climate: Monitoring Shoreline Changes and Island Loss in Response to Climate Change

Global sea level rise as a result of climate change continues to pose a critical threat to coastal ecosystems and populations. The archipelagic country of the Maldives is of critical concern due to being one of the lowest lying areas in the world. The development of reclaimed land in the Maldives by sand dredging has been a frequent response to both increasing sea levels and population increase. Such disturbance can lead to increased sedimentation off the coast and negatively impact coastal environments. Remote sensing tools such as satellite imagery have proved to be an effective tool in observing coastal changes in response to climate change and development. NASA DEVELOP created a methodology to analyze both water quality and shoreline erosion in the Maldives utilizing satellite imagery. Methods relied on open-source software such as QGIS and Google Earth Engine (GEE) and Satellite Imagery from PlanetScope, Landsat 8 Operational Land Instrument (OLI), Sentinel-2 Multi Spectral Instrument (MSI), and Aqua & Terra Moderate Resolution Imaging Radiospectrometer (MODIS) to analyze the changes in shorelines and assess water quality of select atolls within the Maldives. Findings show less shoreline change in developed parts of the island and more shoreline change in natural parts of the island. Additionally, water quality varies throughout the year and our data did not indicate seasonal trends. The methodology will be replicated to continue to monitor island erosion and water quality with the Maldives and will be applicable to other island and coastal systems.

remote sensing↗

Prairie Island Nuclear Station Spent Filter Processing for Direct Disposal - 12333

This paper will discuss WMG's filter processing experience within the commercial nuclear power industry, specifically recent experience processing high activity spent filters generated by Xcel Energy's Prairie Island Nuclear Station (Prairie Island), located in Welch, MN. WMG processed for disposal eighty-four 55-gallon drums filled with varying types of high activity spent filters. The scope of work involved characterization, packaging plan development, transport to the WMG's Off-Site Processing location, shredding the filter contents of each drum, cement solidifying the shredded filter material, and finally shipping the solidified container of shredded filter material to Clive, Utah where the container was presented to EnergySolutions Disposal site for disposal in their Containerised Waste Facility. This sequence of events presented in this paper took place a total of nine (9) times over a period of four weeks. All 1294 filters were successfully solidified into nine (9) -WMG 142 steel liners, and each was successfully disposed of as Class A Waste at EnergySolutions Disposal Site in Clive, Utah. Prairie Island's waste material was unique in that all its filters were packaged in 55-gallon drums; and since the station packaged its filters in drums it was much easier to develop packaging plans for such a large volume of legacy filters. For this author, having over 20-years of waste management experiences, storing and shipping waste material in 55-gallon drums is not immediately thought of as a highly efficient method of managing its waste material. However, Prairie Island's use of 55-gallon drums to store and package its filters provided a significant advantage. Drums could be mixed and matched to provide the most efficient processing method while still meeting the Waste Class A limits required for disposal. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dispatching Grid-Forming Inverters in Grid-Connected and Islanded Mode: Preprint

This paper explores the dispatch-ability of grid-forming (GFM) inverters in grid-connected and islanded mode. Grid-forming (GFM) inverters usually use droop control to automatically share power with other GFM sources (inverters and synchronous generator (SG)) and follow the change of the load demand. However, they can be dispatched like their grid-following (GFL) counterparts to output the target active and reactive power. This will help the grid operator better manage their inverter-based resources (IBRs) for improved operation efficiency and reliability. Therefore, this paper proposes an innovative concept of dispatching GFM sources (inverters and SG) to output the target power for both grid-connected and islanded mode by adjusting their droop intercepts. The fundamental principle of doing so is that the GFM inverter's active and reactive power is dictated by its frequency and voltage, thus, dispatching active and reactve power of a GFM inverter can be achieved through dispatching its frequency and voltage. Moreover, the concept distinguishes the dispatch rules for grid-connected and islanded mode. Finally, the concept is validated with an example microgrid system with two GFM inverters, one diesel generator, one grid-following inverter and loads in both grid-connected and islanded mode. This pioneering work results in a practical guidance for power system energy management system (EMS) development to control a future grid with GFM and GFL inverters.

droop control↗

A Data-Driven Passive Islanding Detection Scheme

This paper proposes a novel statistical parameters based data driven approach for passive islanding detection. The proposed scheme relies in the voltage data, measured at the point of common coupling, and is comprised of three stages. The Stage-1 quickly detects what is termed as coarse islanding, Stage-2 computes the decaying DC detector (DDCD), and 3) finally, the digital relay logic (DRL) is devised in Stage-3. The proposed scheme is tested as per the IEEE-1547, UL 1741 and IEC-62116 standards. Various tests are investigated on the modified IEEE-13 bus system, modeled in PSCAD/EMTDC, under stringent test scenarios such as power mismatch, induction motor starting effect, capacitor bank switching and various level of loads changes, considered for both single and multiple DG systems. The test results reveal that the proposed scheme can detect islanding in less than 2 cycles, and results in nearly zero non detection zone (NDZ). Also, the scheme can very well be used for single-phase microgrids too as it relies only on the single phase voltage information.

anti-islanding protection↗

Strategies for International Cooperation in Support of Energy Development in Pacific Island Nations

The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has been partnering with island communities around the world to address the technical, policy, social, and economic hurdles to deploying energy efficiency and renewable energy technologies (RETs) on small, islanded systems. The lessons learned from these partnerships are briefly summarized in this document with the goal of supporting the International Renewable Energy Agency (IRENA) in the development of specific near-term and longer-term strategies for island RET deployment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy Department Helps Advance Island Clean Energy Goals (Fact Sheet)

This U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) fact sheet highlights a June 2012 solar power purchase agreement between the Virgin Islands Water and Power Authority and three corporations. The fact sheet describes how financial support from DOE and technical assistance from DOE's National Renewable Energy Laboratory enabled the U.S. Virgin Islands torealistically assess its clean energy resources and identify the most viable and cost-effective solutions to its energy challenges--resulting in a $65 million investment in solar energy in the territory.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Mesoscale evaluation of AMPS using AWARE radar observations of a wind and precipitation event over the Ross Island region of Antarctica

Surface, upper-air, and radar observations are used to assess the performance of the Antarctic Mesoscale Prediction System (AMPS) in simulating the mesoscale aspects of a wind and precipitation event over the Ross Island region of Antarctica that spanned January 16–20, 2016. The observations, collected during the Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment (AWARE), provide a unique dataset for evaluating AMPS, especially the radar observations that facilitate a three-dimensional depiction of winds and precipitation. Comparisons of AMPS forecast data with surface meteorology, balloon-sounding, and profiling radar observations at and above sites near McMurdo Station reveal a mixture of similarities and differences. A generally southerly flow is evident at low levels in both the AMPS simulations and observed Doppler radial velocities. AMPS winds are comparable to those observed at the surface and aloft in terms of magnitude, direction, and timing but the strongest simulated southerly flow is displaced eastward relative to the observations. AMPS-simulated reflectivity over the broader Ross Island region is more limited in areal extent and smaller in magnitude than observed by a scanning Doppler radar. Three episodes of surface precipitation are observed near McMurdo Station over the five-day event with peak rates of ~3 mm h -1 and a total accumulation of ~22 mm. However, AMPS produces no surface precipitation at that location over the five-day event due to a low-level dry bias in the forecasts. Herein, the results show the first observationally based three-dimensional understanding of meteorology in the Ross Island region.

AMPS↗

Island scanning pattern optimization for residual deformation mitigation in laser powder bed fusion via sequential inherent strain method and sensitivity analysis

Laser powder bed fusion (L-PBF) has emerged as one of the mainstream additive manufacturing approaches for fabricating metal parts with complex geometries and intricate internal structures. However, large deformation associated with rapid heating and cooling can lead to build failure and requires post-processing which may increase manufacturing cost and prolong the production period. Here in this work, an island scanning pattern design method is proposed to optimize the scanning direction of each island in order to reduce part deformation after cutting off the build platform. The objective of this optimization is to minimize the upward bending of the part after sectioning, which allows the part deformation to satisfy the tolerance requirement or reduce the post heat treatment time. Inherent strain method is employed in the sequential finite element analysis consisting of layer-by-layer activations and sectioning for fast residual distortion prediction. Full sequential sensitivity analysis for the formulated optimization is provided to update the island scanning directions. To show the feasibility and effectiveness of the proposed method, the scanning patterns of a block structure and a connecting rod were designed and parts were fabricated using an open architecture L-PBF machine. The fabrication experiments demonstrated that the residual deformation of both parts fabricated by optimized scanning pattern can be reduced by over 50% compared to the initial scanning patterns, which demonstrate the effectiveness of the proposed method.

36 MATERIALS SCIENCE↗

Collaboration versus communication: The Department of Energy's Amchitka Island and the Aleut Community

Increasingly managers and scientists are recognizing that solving environmental problems requires the inclusion of a wide range of disciplines, governmental agencies, Native American tribes, and other stakeholders. Usually such inclusion involves communication at the problem-formulation phase, and at the end to report findings. This paper examines participatory research, the differences between the traditional stakeholder involvement method of communication (often one-way, at the beginning and the end), compared to full collaboration, where parties are actively involved in the scientific process. Using the Department of Energy's (DOE) Amchitka Island in the Aleutians as a case study, we demonstrate that the inclusion of Aleut people throughout the process resulted in science that was relevant not only to the agency's needs and to the interested and affected parties, but that led to a solution. Amchitka Island was the site of three underground nuclear tests from 1965 to 1971, and virtually no testing of radionuclide levels in biota, subsistence foods, or commercial fish was conducted after the 1970s. When DOE announced plans to close Amchitka, terminating its managerial responsibility, without any further testing of radionuclide levels in biota, there was considerable controversy, which resulted in the development of a Science Plan to assess the potential risks to the marine environment from the tests. The Consortium for Risk Evaluation with Stakeholder Participation (CRESP) was the principle entity that developed and executed the science plan. Unlike traditional science, CRESP embarked on a process to include the Alaskan Natives of the Aleutian Islands (Aleuts), relevant state and federal agencies, and other stakeholders at every phase. Aleuts were included in the problem-formulation, research design refinement, the research, analysis of data, dissemination of research findings, and public communication. This led to agreement with the results, and to developing a path forward (production of a biomonitoring plan designed to provide early warning of any future radionuclide leakage and ecosystem/human health risks). The process outlined was successful in resolving a previously contentious situation by inclusion and collaboration with the Aleuts, among others, and could be usefully applied elsewhere to complex environmental problems where severe data gaps exist.

54 ENVIRONMENTAL SCIENCES↗

Microgrid Optimal Scheduling With Chance-Constrained Islanding Capability

To facilitate the integration of variable renewable generation and improve the resilience of electricity sup-ply in a microgrid, this paper proposes an optimal scheduling strategy for microgrid operation considering constraints of islanding capability. A new concept, probability of successful islanding (PSI), indicating the probability that a microgrid maintains enough spinning reserve (both up and down) to meet local demand and accommodate local renewable generation after instantaneously islanding from the main grid, is developed. The PSI is formulated as mixed-integer linear program using multi-interval approximation taking into account the probability distributions of forecast errors of wind, PV and load. With the goal of minimizing the total operating cost while preserving user specified PSI, a chance-constrained optimization problem is formulated for the optimal scheduling of mirogrids and solved by mixed integer linear programming (MILP). Numerical simulations on a microgrid consisting of a wind turbine, a PV panel, a fuel cell, a micro-turbine, a diesel generator and a battery demonstrate the effectiveness of the proposed scheduling strategy. Lastly, we verify the relationship between PSI and various factors.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Resource assessment of ocean thermal energy conversion in Puerto Rico and U.S. Virgin Islands

Island communities often struggle to establish and maintain traditional electric grids and are therefore heavily reliant on costly imported fossil fuels. In the case of Puerto Rico, these challenges are enhanced by extreme weather and other natural hazards that threaten the local electricity generation and transmission infrastructure. Ocean thermal energy conversion (OTEC) could play an important role in establishing a more resilient electrical grid in the region. Here, in this study, a detailed analysis is conducted to characterize the ocean thermal resource and power potential of OTEC in Puerto Rico based on a 14-year dataset of modeled ocean temperature. The assessment considers seasonal and interannual variability in the region's thermal resource and examines the operational limitations associated with minimal thermal gradients required to run a typical OTEC heat engine. Notably, the local thermal resource is found to be sensitive to El Niño-Southern Oscillation (ENSO) climate patterns, with La Niña conditions linked to greater OTEC power availability. Seven areas of opportunity are identified based on their resource potential and proximity to existing electrical distribution lines, including two that could benefit the nearby U.S. Virgin Islands. The greatest OTEC power potential is observed to the south of the main island of Puerto Rico in the Caribbean Sea with an estimated capacity of 138 MW for a plant pumping cold water from a depth of 1,000 m, or the equivalent amount of electricity required to power 219,000 households.

OTEC↗

Identification of surface urban heat versus cool islands for arid cities depends on the choice of urban and rural definitions

The urban heat island (UHI) effect in arid cities can be small or even negative, the latter known as the urban cool island (UCI) effect. Differences in defining urban and rural areas can introduce uncertainties in detecting UHI or UCI, especially when the UHI signal is small. Here, we compared the surface UHI intensity (SUHII) estimated by a dozen different methods (with multiple urban and/or rural definitions) across 104 arid cities globally, providing a comprehensive evaluation of the uncertainty in SUHII estimates. Results show that the absolute difference in annual average SUHII (ΔSUHII) among methods exceeded 1°C in about half of the arid cities during both daytime and nighttime. Further, the overall annual mean ΔSUHII for all arid cities was 1.35°C during daytime and 1.03 °C at night. The uncertainty arising from simultaneous variations in urban and rural definitions was generally higher than that resulting from their individual changes. It was observed that, with varying definitions of urban and rural areas, nearly 50% of arid cities experienced a sign reversal in daytime SUHII estimates, while approximately 15% exhibited a sign reversal in nighttime SUHII. Variations in urban-rural differences in surface properties, such as vegetation index and albedo, due to differing urban and rural definitions, contributed strongly to the observed SUHII uncertainties. Overall, our results offer new insights into the ongoing debate on heat and cold islands in arid cities, emphasizing a critical need to standardize SUHII estimation frameworks.

54 ENVIRONMENTAL SCIENCES↗

Urban heat island in southern Europe: The case study of Hania, Crete

The aim of the present paper is to analyze the results of the urban heat island research for a coastal densely built small Mediterranean town namely Hania, Crete, Greece. The specific research targets to verify the existence, the intensity, the size and the form of the urban heat island phenomenon in the specific region as well as to understand its correlation with the local weather conditions. Nine urban and three rural meteorological stations are used for this study. Temperature and relative humidity measurements are collected from May 26, 2007 until October 24, 2007. In parallel, meteorological data including wind speed and direction, barometric pressure, sunlight and precipitation for the specific region are collected and elaborated for cross-correlation with the appearance of the urban heat island (UHI) phenomenon. During summer period, where the temperature is high, the UHI takes its maximum intensity, of about 8 C. Also, the form of the UHI is strongly influenced from the wind speed and direction. The northern winds expand the UHI front, while the western winds contribute to the UHI reduction. Finally the Discomfort Index (DI) is calculated for the 2007 summer period to indicate the outdoor living conditions. (author)

54 ENVIRONMENTAL SCIENCES↗