Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Effect of Heat Treatment and Combination of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Ti6Al2V2Zr1.5Mo

The heat treatment and cold rolling combinations have been carried out on titanium alloy Ti6Al2V2Zr1.5Mo, and microstructure evolution and mechanical behavior have been studied. Solution treatment below the β-transus temperature, followed by air cooling, resulted in higher microhardness/strength as compared to the same with water quenching. A sudden drop in microhardness/strength is observed in sample solution heat-treated above β-transus temperature followed by air cooling. The former is attributed to the additional presence of fine secondary α-phase formed by dynamic aging during air cooling as compared to water-quenched samples which did not have fine secondary α-phase. Solution treatment above β-transus temperature resulted in Widmanstatten microstructure with no significant fine secondary α in air-cooled samples. Among the studied conditions of cold rolling (CR), gain in strength of the alloy from annealed condition is significant with first 15% reduction and thereafter it is marginal for 30% reduction. Initiation of cracks at the edges has been observed in 30% CR. The microstructure of cold-rolled samples confirms the fragmentation of α-plates with the presence of high dislocation density. Heat treatment of cold-rolled samples resulted in significant reduction in strength from the as-cold-rolled conditions. The marginally lower strength than the as-received (annealed) or heat-treated alloy samples is due to the recrystallization in CR samples and the formation of Widmanstatten microstructure in air-cooled samples. The alloy does not have fine secondary α or regions with large dislocation density in this condition. The microstructure in the samples heat-treated (with air cooling) below as well as above β-transus temperature (after CR) is similar to air-cooled samples (without prior CR) with heat treatment above β-transus temperature. This indicates the reduction in recrystallization temperature with cold working, which is substantiated with the reduction in strength as well.

36 MATERIALS SCIENCE↗

Techno-economic analysis of hybrid PV/T systems for process heat using electricity to subsidize the cost of heat

Process heat applications make up a large potential market for renewable energy. Despite heating demand being approximately double that of electricity, relatively little work has been done to develop renewable energy for process heat applications. Concentrated solar thermal (CST) systems are capable of reaching temperatures necessary for industrial and commercial steam applications but are often overlooked due to the difficulty of competing with natural gas. Novel hybrid photovoltaic/thermal systems (PV/T) are capable of simultaneously generating electricity and heat. The electricity produced is of higher value and offsets the lifetime cost of the system by producing a cost savings to the facility, ultimately making solar heat competitive with natural gas, propane, coal, and other fuels. The design and economic feasibility of a dish concentrator PV/T (CPV/T) system utilizing a transmissive CPV array is explored through a techno-economic model including technical, financial, and geographical inputs. Through practical design choices, the levelized cost of heat (LCOH) is competitive with natural gas or could even be reduced to zero in some locations by factoring in the electricity savings from additional energy generated by the transmissive CPV module.

14 SOLAR ENERGY↗

A model for droplet heating and evaporation of water-in-oil emulsified fuel

Water-in-oil (W/O) emulsified fuel is a promising alternative fuel by inducing flash boiling of water at high temperature that can improve the atomization of fuel spray. The heating and evaporation process of emulsified fuel droplet is affected by the diffusion and coalescence of small dispersed water droplets in oil during the heating. In this study, a model is developed for the droplet heating and evaporation of W/O emulsified fuel with these key physics considered. The diffusivity of dispersed water droplets in oil is calculated using the Stokes-Einstein equation. The deactivation temperature of surfactant is selected as a criterion for the water coalescence since the water coalescence is due to the deactivation of surfactant. The process of water coalescence is simplified that the dispersed water droplets coalesce into one single water sub-droplet at the center of the oil droplet instantly as the droplet temperature reaches the deactivation temperature of surfactant. The model is validated against experimental data of single droplet under different heating temperatures, surfactant concentrations, and sizes of dispersed water droplets. Based on the proposed model, the effects of fuel properties and heating conditions on the droplet heating and evaporation are analyzed.

Droplet coalescence↗

Phase transformation kinetics in rolled U-10 wt. % Mo foil: Effect of post-rolling heat treatment and prior γ-UMo grain size

The effect of sub-eutectoid heat treatment on the phase transformation behavior in rolled U-10 wt.percent Mo (U10Mo) foils was systematically investigated. The as-cast 5 mm thick foils were initially homogenized at 900 degrees C for 48 hours and were hot rolled to 2 mm and later cold rolled down to 0.2 mm. Three starting microstructures were evaluated: (i) hot- + cold-rolled to 0.2 mm (as-rolled condition), (ii) hot- + cold-rolled to 0.2 mm + annealed at 700 deg. C for 1 hour, and (iii) hot- + cold-rolled to 0.2 mm + annealed at 1000 deg. C for 60 hours. U10Mo rolled foils went through various degrees of decomposition when subjected to the sub-eutectoid heat-treatment step and formed a lamellar microstructure through a cellular reaction mostly along the previous γ-UMo grain boundaries.

Jana, Saumyadeep↗

Membrane-Based Osmotic Heat Engine with Organic Solvent for Enhanced Power Generation from Low-Grade Heat

We present a hybrid osmotic heat engine (OHE) system that uses draw solutions with an organic solvent for enhanced thermal separation efficiency. The hybrid OHE system produces sustainable energy by combining pressure-retarded osmosis (PRO) as a power generation stage and membrane distillation (MD) utilizing low-grade heat as a separation stage. While previous OHE systems employed aqueous electrolyte draw solutions, using methanol as a solvent is advantageous because methanol is highly volatile and has a lower heat capacity and enthalpy of vaporization than water. Hence, the thermal separation efficiency of a draw solution with methanol would be higher than that of an aqueous draw solution. In this study, we evaluated the performance of LiCl-methanol as a potential draw solution for a PRO-MD hybrid OHE system. The membrane transport properties as well as performance with LiCl methanol draw solution were evaluated using thin-film composite (TFC) PRO membranes and compared to the results obtained with a LiCl water draw solution. Experimental PRO methanol flux and maximum projected power density of 47.1 L m(-2) h(-1) and 72.1 W m(-2), respectively, were achieved with a 3 M LiCl-methanol draw solution. The overall efficiency of the hybrid OHE system was modeled by coupling the mass and energy flows between the thermal separation (MD) and power generation (PRO) stages under conditions with and without heat recovery. The modeling results demonstrate higher ORE energy efficiency with the LiCl methanol draw solution compared to that with the LiCl water draw solution under practical operating conditions (i.e., heat recovery <90%). We discuss the implications of the results for converting low-grade heat to power.

Shaulsky, E↗

Effect of post-deposition heat treatment on electrodeposited NiCoCrAlY coatings

An electrolytic process was utilised to fabricate NiCoCrAlY coatings, involving deposition of a composite coating consisting of the (Ni,Co) matrix and CrAlY particles, followed by a diffusion heat treatment to convert the composite coating to the desired NiCoCrAlY microstructure. This study focused on the effects of the post-deposition heat-treating conditions (temperature and atmosphere) on the final coating microstructure and composition. The (Ni,Co)–CrAlY composite coatings were heat-treated for 2 h at 1000, 1100 and 1200°C in vacuum and Ar, respectively. Phase constituents and concentrations of the major elements in the coating after heat treatment were examined. Vacuum heat treatment at temperatures ≥1100°C resulted in a significant decrease in Cr content at the coating surface due to Cr evaporation. Heat treatment at 1200°C also caused outward diffusion of Ti from the substrate alloy to the coating layer.

Zhang, L. Z.↗

Integrated modelling of steady-state scenarios and heating and current drive mixes for ITER

Recent progress on ITER steady-state (SS) scenario modelling by the ITPA-IOS group is reviewed. Code-to-code benchmarks as the IOS group's common activities for the two SS scenarios (weak shear scenario and internal transport barrier scenario) are discussed in terms of transport, kinetic profiles, and heating and current drive (CD) sources using various transport codes. Weak magnetic shear scenarios integrate the plasma core and edge by combining a theory-based transport model (GLF23) with scaled experimental boundary profiles. The edge profiles (at normalized radius rho = 0.8-1.0) are adopted from an edge-localized mode-averaged analysis of a DIII-D ITER demonstration discharge. A fully noninductive SS scenario is achieved with fusion gain Q = 4.3, noninductive fraction f(NI) = 100%, bootstrap current fraction f(BS) = 63% and normalized beta beta(N) = 2.7 at plasma current I(p) = 8MA and toroidal field B(T) = 5.3 T using ITER day-1 heating and CD capability. Substantial uncertainties come from outside the radius of setting the boundary conditions (rho = 0.8). The present simulation assumed that beta(N)(rho) at the top of the pedestal (rho = 0.91) is about 25% above the peeling-ballooning threshold. ITER will have a challenge to achieve the boundary, considering different operating conditions (T(e)/T(i) approximate to 1 and density peaking). Overall, the experimentally scaled edge is an optimistic side of the prediction. A number of SS scenarios with different heating and CD mixes in a wide range of conditions were explored by exploiting the weak-shear steady-state solution procedure with the GLF23 transport model and the scaled experimental edge. The results are also presented in the operation space for DT neutron power versus stationary burn pulse duration with assumed poloidal flux availability at the beginning of stationary burn, indicating that the long pulse operation goal (3000s) at I(p) = 9 MA is possible. Source calculations in these simulations have been revised for electron cyclotron current drive including parallel momentum conservation effects and for neutral beam current drive with finite orbit and magnetic pitch effects.

Murakami, Masanori↗

Relation between photon thermal Hall effect and persistent heat current in nonreciprocal radiative heat transfer

In this work, we study the photon thermal Hall effect and the persistent heat current in radiative heat transfer. We show that the photon thermal Hall effect is not a uniquely nonreciprocal effect; it can arise in some reciprocal systems with broken-mirror symmetry. This is in contrast with the persistent heat current, which is a uniquely nonreciprocal effect that cannot exist in any reciprocal system. Nevertheless, for a specific class of systems with C 4 rotational symmetry, we note that the photon thermal Hall effect is uniquely nonreciprocal, and moreover there is a direct connection between the persistent heat current and the photon thermal Hall effect. In the near-equilibrium regime, the magnitude of the photon thermal Hall effect is proportional to the temperature derivative of the persistent heat current in such systems. Therefore, the persistent heat current as predicted for the equilibrium situation can be probed by the photon thermal Hall effect away from equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat transfer from glass melt to cold cap: Melting rate correlation equation

Increasing the efficiency of all-electric melters is a hot topic not only in the waste glass melting industry, where the melting rate directly influences the life cycle of the cleanup process, but also in the commercial glass industry, where increasingly stringent environmental regulations and rapid development of renewable energy sources ask for transformation of traditional fossil fuel technology. Batch-to-glass conversion in an all-electric melter proceeds in the cold cap—a layer of reacting and melting material floating on molten glass. The heat transfer into the cold cap is controlled by convection and conduction in the thermal boundary layer on the melt side, and by the properties of the foam layer at the cold cap/melt boundary. An overview of factors affecting heat transfer is presented and assessed using data from laboratory and pilot-scale experiments. The heat flux can be improved by (i) decreasing glass melt viscosity, (ii) decreasing the temperature at which the foam starts to collapse at the cold cap bottom, and (iii) increasing melt convection by bubbling gas into the glass melt under the cold cap. Detailed understanding of the conversion process can guide the formulation of feeds that melt easily and quickly.

Hrma, Pavel↗

Heat Transfer from Glass Melt to Cold Cap: Effect of Heating Rate

The feed-to-glass conversion occurs in the cold cap floating on the melt pool in the nuclear waste glass melter. The conversion rate (the melting rate, or the glass production rate) is controlled by the heat flux delivered to the cold cap from molten glass. In an attempt to analyze the intricate relationship between rate of heating, the feed foaming response, and the rate of melting, we experimentally investigated the change in feed volume at different heating rates by using several melter feeds known to exhibit a wide range of melting rates under identical melter operating conditions. As expected, the maximum foam porosity increased as the heating rate increased but, surprisingly, the temperature at which foam reached maximum volume either decreased or increased with the heating rate depending on the feed. The cold cap bottom temperature, a critical factor for the heat flow to the cold cap, and thus the rate of melting, is hypothesized to be roughly equal to the maximum foam temperature measured by the feed volume expansion test.

Lee, Seung Min↗

Heat Generation versus Heat Dissipation Maps for Batteries (Battery Safety Maps) [SWR-21-27]

NREL's Battery Safety Map (Heat Generation versus Heat Dissipation Maps for Batteries) generates a response surface that is grouped into regions where the battery is deemed safe from the propagation of thermal runaway, those where an engineering solution would render the battery safe, and finally instances where thermal runaway is inevitable. The demarcation for the different regions is provided by specifications or constraints imposed by the end user. NREL's Battery Safety Map is a user-defined subroutine that sweeps through a set of parameters describing the operating conditions and short-circuit scenarios for battery safety simulations. For each run, the electrochemical-thermal model implementing reaction kinetics and gas generation are run to evaluate the amount of heat generated. A thermal model then captures the amount of heat dissipation based on boundary conditions defined (e.g., forced convection, constant temperature at the surface, etc.). Based on the rate of heat transfer and the amount of heat generated, each run is classified into "safe," "mitigation possible," or "unsafe" zones. These categories are defined based on constraints or tolerance specifications provided by the end user.

Santhanagopalan, Shriram↗