Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Growth efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Heat exchanger-ingot casting/slicing process, phase 1: Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

A controlled growth, heat-flow and cool-down process is described that yielded silicon with a high degree of single crystallinity. Even when the seed melted out, very large grains formed. Solar cell samples made from cast material yielded conversion efficiency of over 9%. Representative characterizations of grown silicon demonstrated a dislocation density of less than 100/sq cm and a minority carrier diffusion length of 31 micron. The source of silicon carbide in silicon ingots was identified to be from graphite retainers in contact with silica crucibles. Higher growth rates were achieved with the use of a graphite plug at the bottom of the silica crucible.

Schmid, F.↗
NASA NTRS1992

Columbus proto-planetesimal dust aggregation experiment

A microgravity experiment to study the growth of dust particles which has been proposed to be flown on one of the Columbus precursor flights is described. The microgravity environment will allow for low collision velocities (of order of mm/s) of the dust grains and for a large Knudsen number of the embedding gas; conditions expected in the early solar nebula. The outcome of the experiment will yield estimates of the sticking efficiency and the critical velocity for agglomeration. The values of these two parameters will provide substantial improvements in the constraints for models of the formation of planetesimals. In particular, the questions related to growth rate and mode of the aggregation process will be answered. The range of material type, collision velocities, properties of the environment in which growth takes place, and other factors permit a natural extension of this experiment to take advantage of the capabilities of the Space Station Columbus. Other astrophysical applications, such as processes in Saturnian rings, with somewhat different regimes could also be investigated.

Keller, H. U.↗
NASA NTRS1988

The growth of continents and some consequences since 1.5 Ga

The budget of Earth's oceanic sediment masses was discussed in terms of crustal growth and recycling. Based on estimates of the volume of oceanic sediments and the average age of oceanic crust, a continental denudation rate of 1.65 cu km/yr was computed. This crudely balances estimated crustal production rates of about 1 cu km/yr, but the efficiency of sediment loss via subduction, for example, must be considered. It was argued, on the basis of earthquake focal solutions, imagery of subduction zones, and plate kinematic reconstructions that little, if any, sediment was lost in this way. This yields a present day crustal growth rate of about 1 cu km/yr. The volume of continents to 1.5 Ga ago was discussed, assuming constant continental thickness and freeboard, and a constant hydrosphere volume. It was concluded that ocean ridge length was a factor of about 1.75 greater 1.5 Ga ago, but a major uncertainty is the average spreading rate in the past.

Howell, David G.↗
NASA NTRS1976

Design, fabrication and test of prototype furnace for continuous growth of wide silicon ribbon

A program having the overall objective of growing wide, thin silicon dendritic web crystals quasi-continuously from a semi-automated facility is discussed. The design considerations and fabrication of the facility as well as the test and operation phase are covered; detailed engineering drawings are included as an appendix. During the test and operation phase of the program, more than eighty growth runs and numerous thermal test runs were performed. At the conclusion of the program, 2.4 cm wide web was being grown at thicknesses of 100 to 300 micrometers. As expected, the thickness and growth rate are closely related. Solar cells made from this material were tested at NASA-Lewis and found to have conversion efficiencies comparable to devices fabricated from Czochralski material.

Duncan, C. S.↗
NASA NTRS1980

Tailored emitter, low-resistivity, ion-implanted silicon solar cells

Open-circuit voltages as high as 0.645 V (AM0, 25 C) have been obtained by a new process developed for low-resistivity silicon. The process utilizes high-dose phosphorus implantation followed by furnace annealing and simultaneous oxide growth. The effect of the thermally grown oxide is a reduction of surface recombination velocity; the oxide also acts as a moderately efficient antireflection (AR) coating. Boron-doped, float-zone silicon with resistivities from 0.1 to 1.0 (omega)(cm) has been processed according to this sequence; results show that the highest open-circuit voltage is obtained with 0.1(omega)(cm) starting material. The effects of Auger recombination and bandgap narrowing caused by high doping concentrations in the n(+)junction region have been investigated by implanting phosphorus over a wide range of dose levels. The effects of emitter-phosphorus concentrations tailored to optimize electric fields in the emitter have also been investigated.

Minnucci, J. A.↗
NASA NTRS1982

A general solution to the hidden-line problem

The requirements for computer-generated perspective projections of three dimensional objects has escalated. A general solution was developed. The theoretical solution to this problem is presented. The method is very efficient as it minimizes the selection of points and comparison of line segments and hence avoids the devastation of square-law growth.

Hedgley, D. R., Jr.↗
NASA NTRS1987

Predictability in the extended range

This paper describes the results of extended range predictability experiments using an efficient two-level spherical quasi-geostrophic model. The experiments have an initial rms doubling time of about two days. This growth rate, along with an initial error of about one-half the initial error of present operational models, produces an rms error equal to the climatological rms error and a correlation of 0.5 on about day 12 of the forecast. On the largest scales, this limiting point is reached shortly thereafter. The error continues to grow at a decreasing rate until at about 30 days the forecast skill is extremely small and comparable to the skill of a persistence forecast. Various time averages at various lags are examined for skill in the extended range. Filters that weighted most strongly in the initial forecast days provide increased skill.

Roads, John O.↗
NASA NTRS1992

Analysis of soil and species composition

Measurements were made during May to October, 1987 and June to August, 1989 over a tallgrass prairie near Manhattan, Kansas. Soil at the experimental site is predominantly Dwight silty clay loam. The prairie was burned on 16 April 1987 and on 28 April 1989 to improve the mix of grasses and forbs. The experimental area was not grazed during 1986 - 1989. A summary of results are given for soil moisture and plant growth; momentum flux and canopy aerodynamic characteristics; evapotranspiration, components of energy balance and canopy conductance; modeling canopy stomatal conductance; canopy photosynthesis, photosynthetic efficiency and water use efficiency; modeling canopy photosynthesis; the carbon dioxide budget in a temperate grassland ecosystem; and photosynthesis and stomatal conductance related to reflectance on the canopy scale.

Verma, Shashi B.↗
NASA NTRS1993

Investigation of ZnSe-coated silicon substrates for GaAs solar cells

Studies are being carried out to determine the feasibility of using ZnSe as a buffer layer for GaAs solar cells grown on silicon. This study was motivated by reports in the literature indicating ZnSe films had been grown by metallorganic chemical vapor deposition (MOCVD) onto silicon with EPD values of 2 x 10(exp 5) cm(sup -2), even though the lattice mismatch between silicon and ZnSe is 4.16 percent. These results combined with the fact that ZnSe and GaAs are lattice matched to within 0.24 percent suggest that the prospects for growing high efficiency GaAs solar cells onto ZnSe-coated silicon are very good. Work to date has emphasized development of procedures for MOCVD growth of (100) ZnSe onto (100) silicon wafers, and subsequent growth of GaAs films on ZnSe/Si substrates. In order to grow high quality single crystal GaAs with a (100) orientation, which is desirable for solar cells, one must grow single crystal (100) ZnSe onto silicon substrates. A process for growth of (100) ZnSe was developed involving a two-step growth procedure at 450 C. Single crystal, (100) GaAs films were grown onto the (100) ZnSe/Si substrates at 610 C that are adherent and specular. Minority carrier diffusion lengths for the GaAs films grown on ZnSe/Si substrates were determined from photoresponse properties of Al/GaAs Schottky barriers. Diffusion lengths for n-type GaAs films are currently on the order of 0.3 microns compared to 2.0 microns for films grown simultaneously by homoepitaxy.

Huber, Daniel A.↗
NASA NTRS2004

The minimal cost of life in space

The cost of keeping people alive in space is assessed from a theoretical viewpoint and using two actual designs for plant growth systems. While life support is theoretically not very demanding, our ability to implement life support is well below theoretical limits. A theoretical limit has been calculated from requirements and the state of the art for plant growth has been calculated using data from the BIO-Plex PDR and from the Cornell CEA prototype system. The very low efficiency of our current approaches results in a high mission impact, though we can still see how to get a significant reduction in cost of food when compared to supplying it from Earth. Seeing the distribution of costs should allow us to improve our current designs. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Discipline Life Support Systems↗
NASA NTRS2002

High performance P-type thermoelectric materials and methods of preparation

The present invention is embodied in high performance p-type thermoelectric materials having enhanced thermoelectric properties and the methods of preparing such materials. In one aspect of the invention, p-type semiconductors of formula Zn.sub.4-x A.sub.x Sb.sub.3-y B.sub.y wherein 0.ltoreq.x.ltoreq.4, A is a transition metal, B is a pnicogen, and 0.ltoreq.y.ltoreq.3 are formed for use in manufacturing thermoelectric devices with substantially enhanced operating characteristics and improved efficiency. Two methods of preparing p-type Zn.sub.4 Sb.sub.3 and related alloys of the present invention include a crystal growth method and a powder metallurgy method.

Caillat, Thierry↗
NASA NTRS2016

Microarray Data Analysis of Space Grown Arabidopsis Leaves for Genes Important in Vascular Patterning

Venation patterning in leaves is a major determinant of photosynthesis efficiency because of its dependency on vascular transport of photo-assimilates, water, and minerals. Arabidopsis thaliana grown in microgravity show delayed growth and leaf maturation. Gene expression data from the roots, hypocotyl, and leaves of A. thaliana grown during spaceflight vs. ground control analyzed by Affymetrix microarray are available through NASA's GeneLab (GLDS-7). We analyzed the data for differential expression of genes in leaves resulting from the effects of spaceflight on vascular patterning. Two genes were found by preliminary analysis to be up-regulated during spaceflight that may be related to vascular formation. The genes are responsible for coding an ARGOS (Auxin-Regulated Gene Involved in Organ Size)-like protein (potentially affecting cell elongation in the leaves), and an F-box/kelch-repeat protein (possibly contributing to protoxylem specification). Further analysis that will focus on raw data quality assessment and a moderated t-test may further confirm up-regulation of the two genes and/or identify other gene candidates. Plants defective in these genes will then be assessed for phenotype by the mapping and quantification of leaf vascular patterning by NASA's VESsel GENeration (VESGEN) software to model specific vascular differences of plants grown in spaceflight.

venation↗
NASA NTRS2018

Climatespark: an In-Memory Distributed Computing Framework for Big Climate Data Analytics

The unprecedented growth of climate data creates new opportunities for climate studies, and yet big climate data pose a grand challenge to climatologists to efficiently manage and analyze big data. The complexity of climate data content and analytical algorithms increases the difficulty of implementing algorithms on high performance computing systems. This paper proposes an in-memory, distributed computing framework, ClimateSpark, to facilitate complex big data analytics and time-consuming computational tasks. Chunking data structure improves parallel I/O efficiency, while a spatiotemporal index is built for the chunks to avoid unnecessary data reading and preprocessing. An integrated, multi-dimensional, array-based data model (ClimateRDD) and ETL operations are developed to address big climate data variety by integrating the processing components of the climate data lifecycle. ClimateSpark utilizes Spark SQL and Apache Zeppelin to develop a web portal to facilitate the interaction among climatologists, climate data, analytic operations and computing resources (e.g., using SQL query and Scala/Python notebook). Experimental results show that ClimateSpark conducts different spatiotemporal data queries/analytics with high efficiency and data locality. ClimateSpark is easily adaptable to other big multiple- dimensional, array-based datasets in various geoscience domains.

Hu, Fei↗
NASA NTRS2019

Mid-Latitude Freshwater Availability Reduced by Projected Vegetation Responses to Climate Change

Plants are expected to generate more global-scale runoff under increasing atmospheric carbon dioxide concentrations through their influence on surface resistance to evapotranspiration. Recent studies using Earth System Models from phase 5 of the Coupled Model Intercomparison Project ostensibly reaffirm this result, further suggesting that plants will ameliorate the dire reductions in water availability projected by other studies that use aridity metrics. Here we complicate this narrative by analysing the change in precipitation partitioning to plants, runoff and storage in multiple Earth system models under both high carbon dioxide concentrations and warming. We show that projected plant responses directly reduce future runoff across vast swaths of North America, Europe and Asia because bulk canopy water demands increase with additional vegetation growth and longer and warmer growing seasons. These runoff declines occur despite increased surface resistance to evapotranspiration and vegetation total water use efficiency, even in regions with increasing or unchanging precipitation. We demonstrate that constraining the large uncertainty in the multimodel ensemble with regional-scale observations of evapotranspiration partitioning strengthens these results. We conclude that terrestrial vegetation plays a large and unresolved role in shaping future regional freshwater availability, one that will not ubiquitously ameliorate future warming-driven surface drying.

Mankin, Justin S.↗
NASA NTRS2018

Using Remote Sensing to Assess of Growth and Distribution for Floating Invasive Plants and Growth Response Times to Altered Environments

Management of aquatic weeds in complex watersheds and river systems present many challenges to assessment, planning and implementation of management practices for aquatic invasive plants. The Delta Region Areawide Aquatic Weed Project (DRAAWP), a USDA (U. S. Dept. of Agriculture)-sponsored area-wide project, is working to enhance planning, decision-making and operational efficiency of invasive plant management in the California Sacramento-San Joaquin Delta. Satellite and airborne remote sensing are used to map area of plant coverage and estimate biomass density to aid operations and assess management impacts on plant communities. Modeling at local and watershed scales using the SWAT (Soil Water Assessment Tool) modeling tool provides insight into land-use effects on water quality. Environmental variability in the Delta occurs across a range of time scales from long-term climate and seasonal trends to short-term water flow mediated variations. Controlled environment growth studies have been conducted to quantify the growth response of invasive aquatic plants to water quality and other environmental factors. Response time for invasive species response are examined at time scales of weeks, day, and hours using a combination of study duration and growth assessment techniques to assess water quality, temperature (air and water), and light effects. These provide response parameters for plant growth models in response to environmental variation and interact with management and economic models associated with aquatic weed management. Plant growth models are to be informed by remote sensing and applied spatially across the Delta to balance location and type of aquatic plant, growth response to altered environments and phenology. Initial utilization of remote sensing tools developed for mapping of aquatic invasive plants improved operational efficiency in management practices. These assessment methods provide a comprehensive and quantitative view of aquatic invasive plant communities in the California Delta.

Floating↗
NASA NTRS1992

Information models of software productivity - Limits on productivity growth

Research into generalized information-metric models of software process productivity establishes quantifiable behavior and theoretical bounds. The models establish a fundamental mathematical relationship between software productivity and the human capacity for information traffic, the software product yield (system size), information efficiency, and tool and process efficiencies. An upper bound is derived that quantifies average software productivity and the maximum rate at which it may grow. This bound reveals that ultimately, when tools, methodologies, and automated assistants have reached their maximum effective state, further improvement in productivity can only be achieved through increasing software reuse. The reuse advantage is shown not to increase faster than logarithmically in the number of reusable features available. The reuse bound is further shown to be somewhat dependent on the reuse policy: a general 'reuse everything' policy can lead to a somewhat slower productivity growth than a specialized reuse policy.

Tausworthe, Robert C.↗
NASA NTRS1990

The 30-kW ammonia arcjet technology

The technical results are summarized of a 30 kW class ammonia propellant arcjet technology program. Evaluation of previous arcjet thruster performance, including materials analysis of used thruster components, led to the design of an arcjet with improved performance and thermal characteristics. Tests of the new engine demonstrated that engine performance is relatively insensitive to cathode tip geometry. Other data suggested a maximum sustainable arc length for a given thruster configuration, beyond which the arc may reconfigure in a destructive manner. A flow controller calibration error was identified. This error caused previously reported values of specific impulse and thrust efficiency to be 20 percent higher than the real values. Corrected arcjet performance data are given. Duration tests of 413 and 252 hours, and several tests 100 hours in duration, were performed. The cathode tip erosion rate increased with increasing arc current. Elimination of power source ripple did not affect cathode tip whisker growth. Results of arcjet modeling, diagnostic development and mission analyses are also discussed. The 30 kW ammonia arcjet may now be considered ready for development for a flight demonstration, but widespread application of 30 kW class arcjet will require improved efficiency and lifetime.

Deininger, W. D.↗
NASA NTRS2003

Adaptation of SUBSTOR for controlled-environment potato production with elevated carbon dioxide

The SUBSTOR crop growth model was adapted for controlled-environment hydroponic production of potato (Solanum tuberosum L. cv. Norland) under elevated atmospheric carbon dioxide concentration. Adaptations included adjustment of input files to account for cultural differences between the field and controlled environments, calibration of genetic coefficients, and adjustment of crop parameters including radiation use efficiency. Source code modifications were also performed to account for the absorption of light reflected from the surface below the crop canopy, an increased leaf senescence rate, a carbon (mass) balance to the model, and to modify the response of crop growth rate to elevated atmospheric carbon dioxide concentration. Adaptations were primarily based on growth and phenological data obtained from growth chamber experiments at Rutgers University (New Brunswick, N.J.) and from the modeling literature. Modified-SUBSTOR predictions were compared with data from Kennedy Space Center's Biomass Production Chamber for verification. Results show that, with further development, modified-SUBSTOR will be a useful tool for analysis and optimization of potato growth in controlled environments.

NASA Discipline Life Support Systems↗