Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

New Strainmeters used to Monitor Deformation During Injection and Withdrawal

Injecting or removing fluids from reservoirs or aquifers causes deformation that can be used as a diagnostic signal in some cases, while it can interfere with geodetic interpretations in other cases. This has motivated us to develop instrumentation and methods to characterize the strain field resulting from injection and pumping. Three new instruments have been deployed at our field stations near Clemson University and at the Avant Field north of Tulsa, OK. Two use non-contact eddy current transducers configured to measure four components of strain and two tilts to 1 part-per-billion. One system is designed for permanent installation, the other is removable for short term deployments. Another system is a low cost volumetric strainmeter consisting of an embedded optical fiber that is interrogated using laser interferometry. This strainmeter is designed to be a permanently installed and has a resolution of several parts-per-trillion. The field sites are designed to characterize strains during pumping or injection over different scales and in different geologic settings. The Clemson field station is underlain by biotite gneiss, a low permeability crystalline rock overlain by moderate permeability, soft saprolite above 30m depth. The water table is at approximately 9m depth. The strainmeters are in the crystalline rock at approximately 40m depth, and pumping occurs in the overlying saprolite. In contrast, wells at the Avant Field site are much deeper. They are approximately 500m deep and completed in a 25-m-thick oil-bearing sandstone. Strainmeters at the Avant Field are at ~30m depth. These two sites provide contrasting approaches to characterizing strain at 30-40m depth. Water is pumped from an overlying formation at the Clemson site, whereas it is pumped from a much deeper underlying formation at the Avant Field. Preliminary results are available from a brief injection test, and from a longer shut-in test at the Avant Field. Injection is characterized by an increase in tensile strains in both the radial and circumferential directions approximately 220m from the well. The shut-in was characterized by radial tension and circumferential compression in response to a well approximately 1km from the strainmeter. These are the expected signals caused by injection and shut-in according to poroelastic simulations.

DeWolf, Scott↗

Western USA Assessment of High Value Materials in Geothermal Fluids and Produced Fluids

This submission includes the following: - Field Characteristics: Describes the geological and production field characteristics of sampling sites - Geochemistry of Produced Fluids Idaho-Nevada-New Mexico-Oregon-Utah: Summarizes the all the analytical results for aqueous samples collected from geothermal production wells, hydrocarbon production wells, and hot springs. - Geochemistry of Reservoir Rocks & Calcite Scales Nevada-Utah: Analytical results of trace element analyses of reservoir drill cuttings from Beowawe, Dixie Valley, Roosevelt Hot Springs, Uinta Basin, and Paradox Basin (Aneth field); also includes analyses of Dixie Valley calcite scales and rocks in the Sevier Thermal Belt, Utah. - Lithology and mineralogy of drill cuttings from Beowawe, Dixie Valley and Roosevelt Hot Springs: Lithological and mineralogical characterization of drill cuttings from Beowawe, Dixie Valley and Roosevelt Hot Springs - Geological Settings of Critical Element Mineral Deposits: Brief summary and references regarding the geological settings of critical element mineral deposits

15 GEOTHERMAL ENERGY↗

The fourth decade of underground research at the Grimsel Test Site - what we have learned and where we go from here - 15075

At the Grimsel Test Site, NAGRA and its partners have celebrated thirty years' worth of essential contributions to the characterization of crystalline host rock, and the development and confirmation of safe geological disposal concepts. In operation since 1984, the underground research laboratory in the Swiss Alps shall not accept radioactive waste but can host experiments with radiotracers/radionuclides under strictly controlled conditions. The strong drive for international cooperation at the Grimsel Test Site is reflected in the more than two dozen organizations and research institutes from twelve countries and the European Union which have participated in the research program to date. The program has been designed dynamically to always mirror the current requirements of national programs for the long-term management of radioactive waste, as well as attempt to anticipate the next steps. Early work featured the development of methodologies for formation characterization. Then followed a period concentrating on performance assessment issues, before radionuclide migration and barriers were investigated intensely. The past 15 years have been dominated by engineering demonstration experiments. The research conducted at the Grimsel Test Site has complemented laboratory experiments, surface investigations and numerical modelling studies through the bridging of different scales and drawing off links between laboratory setups and natural analogues. The crystalline rock formations of the Aar Massif have provided an opportunity to do experiments in environments similar to those of future repositories. The facility also serves as a platform for continual knowledge transfer between generations of scientists and fosters synergies among disciplines. However, considering the ambitious schedule for repository implementation in several continuous, one may ask whether the era of generic underground rock laboratories is approaching its end. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of Used Fuel Disposition in Clay-Bearing Rock

The DOE R&D program under the Spent Fuel Waste Science Technology (SFWST) campaign has made key progress in modeling and experimental approaches towards the characterization of chemical and physical phenomena that could impact the long-term safety assessment of nuclear waste disposition in deep clay/shale/argillaceous rock. Interactional collaboration activities such as heater tests, particularly postmortem sample recovery and analysis, have elucidated important information regarding changes in engineered barrier system (EBS) material exposed to years of thermal loads. Chemical and structural analyses of bentonite material from such tests has been key to the characterization of thermal effects affecting clay composition, sorption behavior, and swelling. These are crucial to evaluating the nature and extent of bentonite barrier sacrificial zones in the EBS during the thermal period. Thermal, hydrologic, and chemical data collected from heater tests and laboratory experiments has been used in the development and validation of THMC simulators to model near-field coupled processes affecting engineered and natural barrier materials, particularly during the thermal period. This information leads to the development of simulation approaches (e.g., continuum vs. discrete) to tackle issues related to flow and transport depending on the nature of the host-rock and EBS design concept. This report describes R&D efforts on disposal in argillaceous geologic media through developments of coupled THMC process models, hydrothermal experiments and characterization of clay/metal barrier material interactions, and spent fuel and canister material degradation. Currently, the THM modeling focus is on heater test experiments in argillite rock and gas migration in bentonite as part of international collaboration activities at underground research laboratories (URLs). In addition, field testing at an URL involves probing of fault movement and characterization of fault permeability changes. Analyses of barrier samples (bentonite) from heater tests at URLs provide compositional and structural data to evaluate changes in clay swelling and thermal behavior with distance from the heater surface. Development of a spent fuel degradation model coupled with canister corrosion effects has been centered towards its integration with Generic Disposal System Analysis (GDSA) to describe source term behavior. As in previous milestone deliverables, this report is structured according to various national laboratory contributions describing R&D activities applicable to clay/shale/argillite media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterizing the Evolution of Trapped scCO 2 Curvature in Bentheimer and Nugget Sandstone Pore Geometry

During a Geologic Carbon Storage process, supercritical CO 2 (scCO 2 ) is subjected to a series of dynamic and static conditions where the relationship between pore geometry and the trapped scCO 2 curvature remains to be established. To mimic the dynamic process, two sandstones, Bentheimer and Nugget, were subjected to two successive drainage and imbibition (D-I) cycles and X-ray computed tomography scanned at each residual state to capture the wettability evolution at static conditions in the same pore geometry. Both sandstones contain similar grain size distributions, pore size distributions, and pore interconnectivity but differ in that the Nugget formation contains approximately half the porosity of the Bentheimer sandstone, and the pore network contains dead-end pores. scCO 2 size distributions, strain calculations, and geometric contact angle measurements were used to characterize the curvature of scCO 2 in different pore types between cycles. An increase in geometric contact angle was the greatest when advancement along the pore network of the same ganglion occurred between cycles while strain increased the most with pore-filling trapping. Moreover, Nugget sandstone results in a greater aggregated residual saturation and shows a clear increase in scCO 2 sizes with an additional D-I cycle while scCO 2 in the Bentheimer core shows a more complex response with some ganglion increasing and some decreasing in size with an additional D-I cycle. From this work, we suspect the pore geometry is playing a role in scCO 2 size distributions and use this information to suggest using water pulses to enhance trapping capacity in lower porosity sandstones.

58 GEOSCIENCES↗

Correlative X-ray micro-nanotomography with scanning electron microscopy at the Advanced Light Source

Geological samples are inherently multi-scale. Understanding their bulk physical and chemical properties requires characterization down to the nano-scale. A powerful technique to study the three-dimensional microstructure is X-ray tomography, but it lacks information about the chemistry of samples. To develop a methodology for measuring the multi-scale 3D microstructure of geological samples, correlative X-ray micro- and nanotomography were performed on two rocks followed by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis. The study was performed in five steps: (i) micro X-ray tomography was performed on rock sample cores, (ii) samples for nanotomography were prepared using laser milling, (iii) nanotomography was performed on the milled sub-samples, (iv) samples were mounted and polished for SEM analysis and (v) SEM imaging and compositional mapping was performed on micro and nanotomography samples for complimentary information. Correlative study performed on samples of serpentine and basalt revealed multiscale 3D structures involving both solid mineral phases and pore networks. Significant differences in the volume fraction of pores and mineral phases were also observed dependent on the imaging spatial resolution employed. This highlights the necessity for the application of such a multiscale approach for the characterization of complex aggregates such as rocks. Information acquired from the chemical mapping of different phases was also helpful in segmentation of phases that did not exhibit significant contrast in X-ray imaging. Adoption of the protocol used in this study can be broadly applied to 3D imaging studies being performed at the Advanced Light Source and other user facilities.

58 GEOSCIENCES↗

Electrostatic Origins of CO 2 -Increased Hydrophilicity in Carbonate Reservoirs

Injecting CO 2 into oil reservoirs appears to be cost-effective and environmentally friendly due to decreasing the use of chemicals and cutting back on the greenhouse gas emission released. However, there is a pressing need for new algorithms to characterize oil/brine/rock system wettability, thus better predict and manage CO 2 geological storage and enhanced oil recovery in oil reservoirs. We coupled surface complexation/CO 2 and calcite dissolution model, and accurately predicted measured oil-on-calcite contact angles in NaCl and CaCl 2 solutions with and without CO 2 . Contact angles decreased in carbonated water indicating increased hydrophilicity under carbonation. Lowered salinity increased hydrophilicity as did Ca 2+ . Hydrophilicity correlates with independently calculated oil-calcite electrostatic bridging. The link between the two may be used to better implement CO 2 EOR in fields.

Science & Technology - Other Topics↗

Initial Report on Reservoir Modeling (SECARB Phase III Work Product 4.2.4.b)

The SECARB Partnership Anthropogenic Test, located in the Southeast Unit of the Citronelle oilfield will inject CO 2 into the saline waters of the Cretaceous Paluxy sandstone formation for three to four years. In order to accurately model the injection, migration, and long-term fate of carbon dioxide (CO 2 ) in the subsurface, GEM-GHG, a Computer Modeling Group software program for reservoir simulation and transport modeling was selected for the simulation. GEM-GHG is a very robust compositional reservoir simulator, with all the necessary options available for modeling CO 2 trapping mechanisms (including solubility, residual gas and mineralization). This simulation tool is widely known and used in the petroleum and sequestration industries. A reservoir model was built, based on a previously developed comprehensive picture of the subsurface geology at the site (Work Product 4.2.1.d - Report on Subsurface Characterization for the Anthropogenic Test Project Site). This report describes in details the different inputs that were used to create the model as well as the results of the injection scenario in terms of achievable injection rates, plume extension and pressure response.

01 COAL, LIGNITE, AND PEAT↗

Final Report on Reservoir Modeling (SECARB Phase III Work Product 4.2.4.c)

The SECARB Partnership Anthropogenic Test, located in the Southeast Unit of the Citronelle oilfield will inject CO 2 into the saline waters of the Cretaceous Paluxy sandstone formation for three years. In order to accurately model the injection, migration, and long-term fate of CO 2 in the subsurface, GEM, a Computer Modeling Group software program for transport and geochemical modeling, was selected for the simulation. GEM is a very robust compositional reservoir simulator, with all the necessary options available for modeling CO 2 trapping mechanisms (including solubility, residual gas and mineralization). This simulation tool is widely known and used in the petroleum and sequestration industries. A reservoir model was built, based on a previously developed comprehensive picture of the subsurface geology at the site (Work Product 4.2.1.d - Report on Subsurface Characterization for the Anthropogenic Test Project Site). This report describes in details the different inputs that were used to create the model as well as the results of the injection scenario in terms of achievable injection rates, plume extent and pressure response.

01 COAL, LIGNITE, AND PEAT↗

Effects of Supercritical CO 2 Injection on the Shale Pore Structures and Mass Transport Rates

Characterizing the pore structures and transport properties of low-permeability shales is critical for evaluating these formations as potential seals or storage sites for geological CO 2 sequestration. Here, we use low-pressure gas adsorption in conjunction with nuclear magnetic resonance (NMR) to characterize the pore-size distribution of shales before and after injection of supercritical CO 2 . Nitrogen gas was used as the detecting phase for the adsorption experiments and pentane liquid was used for the NMR experiments. We also performed time-resolved NMR and gravimetric microbalance measurements to observe mass transport during desaturation. We use these data to estimate the self-diffusion coefficient of pentane and changes in the saturation state of the pore network. We analyzed samples with a range of compositions from the Wolfcamp shale before and after exposure to supercritical CO 2 for 3 days. Integrating the gas adsorption and NMR data shows how supercritical CO 2 injection alters the pore-size distribution for pore sizes <1 nm to 1 mm. Finally, our results provide insights on how the pore structure and mass transport properties of different shale lithologies may evolve during storage of supercritical CO 2 .

58 GEOSCIENCES↗

Detailed Geophysical Fault Characterization in Yucca Flat, Nevada Test Site, Nevada

Yucca Flat is a topographic and structural basin in the northeastern part of the Nevada Test Site (NTS) in Nye County, Nevada. Between the years 1951 and 1992, 659 underground nuclear tests took place in Yucca Flat; most were conducted in large, vertical excavations that penetrated alluvium and the underlying Cenozoic volcanic rocks. Radioactive and other potential chemical contaminants at the NTS are the subject of a long-term program of investigation and remediation by the U.S. Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office, under its Environmental Restoration Program. As part of the program, the DOE seeks to assess the extent of contamination and to evaluate the potential risks to humans and the environment from byproducts of weapons testing. To accomplish this objective, the DOE Environmental Restoration Program is constructing and calibrating a ground-water flow model to predict hydrologic flow in Yucca Flat as part of an effort to quantify the subsurface hydrology of the Nevada Test Site. A necessary part of calibrating and evaluating a model of the flow system is an understanding of the location and characteristics of faults that may influence ground-water flow. In addition, knowledge of fault-zone architecture and physical properties is a fundamental component of the containment of the contamination from underground nuclear tests, should such testing ever resume at the Nevada Test Site. The goal of the present investigation is to develop a detailed understanding of the geometry and physical properties of fault zones in Yucca Flat. This study was designed to investigate faults in greater detail and to characterize fault geometry, the presence of fault splays, and the fault-zone width. Integrated geological and geophysical studies have been designed and implemented to work toward this goal. This report describes the geophysical surveys conducted near two drill holes in Yucca Flat, the data analyses performed, and the integrated interpretations developed from the suite of geophysical methodologies utilized in this investigation. Data collection for this activity started in the spring of 2005 and continued into 2006. A suite of electrical geophysical surveys were run in combination with ground magnetic surveys; these surveys resulted in high-resolution subsurface data that portray subsurface fault geometry at the two sites and have identified structures not readily apparent from surface geologic mapping, potential field geophysical data, or surface effects fracture maps.

58 GEOSCIENCES↗

Characterization of CO 2 storage and enhanced oil recovery in residual oil zones

Residual oil zones (ROZs) are reservoirs in which oil is swept over geologic time period and exists at residual saturation. The oil in such reservoirs cannot be commercially exploited using conventional oil recovery methods as the oil exists at residual oil saturation. Instead, enhanced oil recovery methods such as CO 2 injection are required. Recently, ROZs have been increasingly studied as potential CO 2 storage targets. In spite of increased interest in ROZs, there are significant gaps in the knowledge of parameters and processes that impact CO 2 storage and oil recovery. In this work, we identify key geologic and operational characteristics that affect CO 2 storage capacity and oil recovery potential by performing Monte Carlo simulations and sensitivity analysis. In addition to CO 2 storage capacity, we also characterize the long-term CO 2 fate in ROZs. The distinction of CO 2 storage in ROZs from conventional oil reservoirs and saline aquifers are also characterized. Furthermore, predictive models based on machine learning techniques are developed to estimate CO 2 storage and oil production potentials for ROZs. The applicability of the predictive models is demonstrated for five ROZs in the Permian Basin.

54 ENVIRONMENTAL SCIENCES↗

Imaging and quantification of spreading and trapping of carbon dioxide in saline aquifers using meter-scale laboratory experiments

The role of capillary forces during buoyant migration of CO 2 is critical toward plume immobilization within the postinjection phase of a geological carbon sequestration operation. However, the inherent heterogeneity of the subsurface makes it very challenging to evaluate the effects of capillary forces on the storage capacity of these formations and to assess in situ plume evolution. To overcome the lack of accurate and continuous observations at the field scale and to mimic vertical migration and entrapment of realistic CO 2 plumes in the presence of a background hydraulic gradient, we conducted two unique long-term experiments in a 2.44 m × 0.5 m tank. X-ray attenuation allowed measuring the evolution of a CO 2 -surrogate fluid saturation, thus providing direct insight into capillarity-dominated and buoyancy-dominated flow processes occurring under successive drainage and imbibition conditions. The comparison of saturation distributions between two experimental campaigns suggests that layered-type heterogeneity plays an important role on nonwetting phase (NWP) migration and trapping, because it leads to (i) longer displacement times (3.6 months versus 24 days) to reach stable trapping conditions, (ii) limited vertical migration of the plume (with center of mass at 39% versus 55% of aquifer thickness), and (iii) immobilization of a larger fraction of injected NWP mass (67.2% versus 51.5% of injected volume) as compared to the homogenous scenario. Finally, while these observations confirm once more the role of geological heterogeneity in controlling buoyant flows in the subsurface, they also highlight the importance of characterizing it at scales that are below seismic resolution (1–10 m).

54 ENVIRONMENTAL SCIENCES↗

CO 2 storage in depleted oil and gas fields in the Gulf of Mexico

Depleted oil and gas reservoirs are one of the prime-candidate formations for geologic CO 2 storage. Although both the geological structure and the physical properties of most of them have been extensively studied and characterized, there is limited data on the assessment of the CO 2 storage capacity, especially in the offshore fields. The purpose of this study is to develop a high-level quantitative assessment of the CO 2 volume that can be stored in depleted oil and gas fields in the Federal offshore regions of the Gulf of Mexico (GOM), both on a field-by-field and on a reservoir-by-reservoir basis. In this study, we simulated CO 2 storage in 461 of the depleted oil and gas reservoirs (73 fields) among 3514 reservoirs (675 fields) in the GOM (2013 BOEM Reserves database). Based on the simulation results, we improved the Department of Energy (DOE) CO 2 Storage Resource Estimate Equation to make more refined and accurate estimates of storable CO 2 volumes. Newly revised efficiency factor (ERoil/gas) correlates better with hydrocarbon recovery factor (HCRF), which is found to be a strong indicator of the CO 2 storage capacity of the reservoir. The higher HCRF results in higher ERoil/gas. The further investigations resulted in an improved, material balance-based correlation—which is called the Production-CO 2 Storage Correlation—between cumulative production (free gas, oil and water) at reservoir conditions and CO 2 storage volume at standard conditions. This relationship, which is unique for all three types of reservoirs (gas, oil and combination), allows for making direct estimates of CO 2 storage volume using only existing production data. Application of these correlations to all of the depleted fields (3514 reservoirs) yields CO 2 storage capacities of 4748 MMtons, and the CO 2 storage capacity in all 1295 depleted and active fields (13,289 reservoirs) in the GOM calculated to be 21.57 Billion tons. If a 5000 psia surface injection pressure constraint was applied, these volumes would be reduced to 4075 MMtons for all depleted fields only and to 15.80 Billion tons for all depleted and active fields in the GOM. Therefore, the production-CO 2 storage correlations can be used to make more accurate CO 2 storage volume estimates in all onshore and offshore depleted oil and gas fields.

03 NATURAL GAS↗

Comparison of Microbial Profiling and Tracer Testing for the Characterization of Injector-Producer Interwell Connectivities

Insufficient understanding of the microbial communities and associated microbial processes in geological reservoirs hinders the utilization of this rich data source for improved resource management. In this study, along with four interwell tracer tests at a 1478-m deep fractured crystalline-rock aquifer, we analyzed the microbial communities in the injected and produced water by high-throughput sequencing. The microbial community similarities across boreholes during an interwell flow scenario frequently encountered in reservoir development was explored. Despite the significant tracer recoveries (~30%) in all tracer tests and the cumulatively >100,000 L of exogenous water (carrying exogenous microbes) injected into the 10-m-scale reservoir, the overall structure of produced-fluid microbiome did not increasingly resemble that of the injectate. However, producers with better connectivity with the injector (based on tracer test results) did have more amplicon sequence variants (ASVs) that overlapped with those in the injectate. We identified possible drivers behind our observations and verified the practicality of repeated microbial sampling in the context of reservoir characterization and long-term monitoring. We highlight that injector-producer microbial profiling could provide insights on the relative connectivities across different producers with a given injector, and that the associated logistical needs may be comparable or even less than that of classic tracer tests.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluating the Suitability for CO 2 Storage at the FutureGen 2.0 Site, Morgan County, Illinois, USA

FutureGen 2.0 site will be the first near-zero emission power plant with fully integrated long-term storage in a deep, non-potable saline aquifer in the United States. The proposed FutureGen 2.0 CO 2 storage site is located in northeast Morgan County, Illinois, U.S.A., forty-eight kilometres from the Meredosia Energy Center where a large-scale oxy-combustion demonstration will be conducted. The demonstration will involve > 90% carbon capture, which will produce more than one million metric tons (MMT) of CO 2 per year. The CO 2 will be compressed at the power plant and transported via pipeline to the storage site. To examine CO 2 storage potential of the site, a 1,467m characterization well (FGA#1) was completed in December 2011. The target reservoir for CO 2 storage is the Mt. Simon Sandstone and Elmhurst Sandstone Member of the lower Eau Claire Formation for a combined thickness of 176 m. Confining beds of the overlying Lombard and Proviso Members (upper Eau Claire Formation) reach a thickness of 126 m. Characterization of the target injection zone and the overlying confining zone was based on wellbore data, cores, and geophysical logs, along with surface geophysical (2-D seismic profiles, magnetic and gravity), and structural data collected during the initial stage of the project . Based on this geological model, 3D simulations of CO 2 injection and redistribution were conducted using STOMP-CO 2 , a multiphase flow and transport simulator. After this characterization stage, it appears that the injection site is a suitable geologic system for CO 2 sequestration and that the injection zone is sufficient to receive up to 33 MMT of CO 2 at a rate of 1.1 MMT/yr. GHGT-11 conference

54 ENVIRONMENTAL SCIENCES↗

A Novel Technique for Distributed Measuring of Strain in the Vadose Zone

Characterizing water content and pressure changes in the vadose zone is important to understanding a variety of geologic processes, ranging from permeability, to evapotranspiration, and aquifer recharge. Changes in water content, or pressure, cause strain in the solid porous medium of the vadose zone, and it is possible that measuring those strains could be used a characterization tool. The Coherence-length-gated Microwave Photonics Interferometry (CMPI) technique measures strain at high resolution along many intervals defined by pairs of reflectors distributed along an optical fiber. This technique has recently been developed at Clemson University, and it has the spatial, and temporal resolution to characterize the strains that are expected to occur with hydrologic changes in the vadose zone. However, the technique has never been used to measure strain in porous media, so its capabilities remain uncertain. The objective of this thesis is to evaluate the ability of using CMPI to measure strain changes in the vadose zone. The research approach consists of conducting laboratory tests using a column filled with sand that was subjected to changes in water content and pressure. An optical fiber with CMPI reflectors was deployed in a high surface area ribbon and used to measure strain along the axis of the column. The column was made from 8-inch, Schedule 40 PVC pipe (75 cm tall, 20 cm inner diameter) and filled with medium-grained sand (K = 2.5x10-6 m/s, porosity = 0.28, Coefficient of Uniformity = 2, van Genuchten (n = 4.34 and  = 0.00039 m-1), Young’s Modulus = 18 – 47 MPa). Five pressure and four temperature sensors attached to probes inserted into the wall. The optical fiber includes five reflectors spaced 10 cm apart on the inside and outside of the column along the vertical axis. Strain measurements are made between pairs of reflectors. The reflectors are created in 250-micron-diameter acrylate-coated single mode Corning SMF28e+ optical fiber using a femtosecond laser. The optical fiber was laminated between two pieces of polyester film creating a large surface area to transfer strain from the porous media to the optical fiber. The experiments were conducted by filling the column from the bottom or infiltrating water from the top. The water was allowed to equilibrate to room temperature prior to each test in order to limit thermoelastic strain. Five injection tests with a rate of 250 ml/min and three infiltration tests at varying rates were conducted, and the results show patterns of strain and pressure are generally similar. Hydrologic conditions define three zones based on the pressure magnitude and distribution. 1.) Ambient Zone where the pressure heads are quasi-static and the pressure gradient is roughly unity (head gradient of zero). This is the uppermost zone and is characterized by negative pressures. 2.) Transition Zone where the pressures increase from ambient to zero, are changing relatively rapidly and the pressure gradient is relatively steep (pressure head gradients of 2). The Transition zone is 10 to 15 cm thick. 3.) Positive Pressure Zone where the pressure is positive, the rate of change is slower than in the transition zone and the gradient is flatter (pressure head gradient 1.1 to 1.2). This is the lowest zone in the column. Injection of water causes the pressure to increase and the three zones to move upward. The Transition zone moves at a rate of approximately 0.0002 m/s +/- .00005, according to analyses of pressure profiles. This is the same as the average velocity of the water calculated as volumetric flux/effective porosity =5.4x10-5 m/s/0.28. Strain signals in the range of 10s  were observed with a noise level of generally less than 0.1  (signal to noise ratio of greater than 100) during injection and drainage. The spatial and temporal distributions of strain caused by injection depend on the location of the moving pressure zones. The locations of the different pressure zones were determined from pressure profiles at different times and these data were transferred to strain time series. This showed that strain in the Ambient pressure zone is either unchanged or slightly compressive, whereas strain in Transition zone is tensile and roughly proportional to the pressure change, and strain ranges from tensile to compressive in the Positive Pressure zone. In general, the strain is variable at the top of the Positive Pressure zone, but it appears to be consistently tensile lower in the zone. The spatial distribution of strain causes three distinct stages in the strain times series measured between pairs of CMPI reflectors. The strain is unchanged or slightly compressive during Stage 1, it increases (positive strain is tensile) approximately linearly at a rate of 0.02 to 0.03 μ/s during the Stage 2, and then flattens out in Stage 3. The strain increases again during Stage 4 of the time series. The pressure also changes in stages. It is unchanged during Stage 1 and then increases relatively rapidly at a rate of between 4 and 10 Pa/s during Stage 2 and continues to increase during Stages 3 and 4, but at a rate slightly slower than during Stage 2 (from 2.5 to 3.5 Pa/s). The rates of pressure and strain change are consistent with basic analyses. The rate of pressurization is similar to the calculated velocity of flow in the saturated zone, and this is similar to the measured velocity of the strain increase. The ratio of the pressurization rate and strain rate during Stage 2 (2.5 (Pa/s) /0.03 (μ/s)) is 80 MPa, which is approximately equal to the upper range expected considering the uniaxial compression and the Young’s Modulus of the sand. An interesting effect occurs when the upper surface of the sand becomes saturated. Significant compression (several 10s of ) occurs as the pressure and saturation increase at the upper surface. Compression occurs throughout the column, but the effect is greatest at the top of the column. The rate of compression is fastest slightly before ponding occurs, but it slows markedly and nearly stops when water starts to accumulate at the surface (ponding). This effect reverses when the surface of the sand is drained, resulting in tension throughout the column. The compression caused by this effect can be as large or larger than the tensile strain that accumulated during filling. This effect was unexpected because increasing pressure is normally associated with tensile strain. Nevertheless, this effect was observed consistently in all tests where the pressure changes at the upper surface, including tests where water was injected from below or infiltrated from above. This effect behaves as if the pore pressure at the upper surface of the sand exerts a normal force on the boundary (increasing pore pressure exerts a downward compression on the boundary). The results of these laboratory experiments indicate that CMPI can measure strain caused by fluid pressure changes in the vadose zone with a signal to noise ratio of 100 or more. Injection and drainage cause a strain signal that is complex, but repeatable. The magnitudes of the strain signal are consistent with magnitudes that are expected based on poroelastic calculations using independently measured properties of the sand. These results indicate that the CMPI technique with an optical fiber laminated in a polyester ribbon generates data that represent the strain distribution during hydrologic processes of imbibition and drainage in variably saturated sand. This suggests that distributed strain measurements using CMPI could be a viable approach for evaluating processes in the vadose zone, laying the groundwork for future field implementation.

47 OTHER INSTRUMENTATION↗