Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRATINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The Bikinians

On March 29, 1944, a small contingent of Marines invaded Bikini Atoll. Their mission was to wrest control of the atoll from Japan and, at the same time, prevent the Bikinians from interfering with the ongoing war effort. The Marines found only five Japanese, all dead by suicide, and about 150 starving islanders who also were suffering from such diseases as the Yaws. The Marines fed the Bikinians and secured medical treatment for them. The Bikinians, like all Marshallese, were extremely grateful to be rescued by Americans. Two years later, the Navy landed on Bikini to send the islanders into exile so that their ancestral homeland could be used for Operation Crossroads. On March 7 th , the Bikinians were relocated to uninhabited Rongerik Atoll, where the Navy had built a village complete with twenty-six homes, canvas water tanks, screened toilets, and nine concrete cisterns. Although the accommodations were adequate, the Navy did not understand that uninhabited Marshallese atolls cannot sustain native life. Within two years, the Bikinians would have to be rescued from starvation again.

99 GENERAL AND MISCELLANEOUS↗

Pinwheel Experiment Confirmatory Shot 1 Pre-Shot Report

The purpose of this experimental series is to validate the reactive burn model in the PAGOSA hydrodynamic code. It will also help validate the EOS and Strength models for the aluminum and tantalum cylinders. C4 high explosive (HE) is used to drive an aluminum cylinder into an aluminum sandwiched PBX-9501. The follow-on experiment will drive the aluminum cylinder into a tantalum sandwiched PBX-9501. The experiment will provide time of arrival (TOA) data for the burn front in the HE through the metal cylinders using Fiber Bragg Gratings (FBG). Photon Doppler Velocimetry (PDV) will provide shock wave TOA and the velocity of the inward moving cylinder. The PAGOSA code will be used to predict TOA and cylinder wall velocity using PDV and tracers.

42 ENGINEERING↗

Development of Optical Fiber-Based Sensors for Nuclear Microreactor Structural Health Monitoring

This report provides an experimental assessment of two different optical fiber–based acoustic sensors that are being investigated for application in nuclear microreactors to enhance structural health monitoring capabilities. Optical fibers are resilient in high-temperature and high-radiation environments, have a small sensor footprint, are immune to electromagnetic interference, and are capable of spatially distributed sensing. The two sensors investigated here are (1) Fabry–Pérot Cavities (FPCs) between two copper-coated fibers, embedded in nickel capillary tubes and (2) type-I fiber Bragg grating (FBG) arrays contained within metal capillary tubes. These sensors can be interrogated using low-coherence interferometry or swept wavelength interferometry, respectively, to measure the resonant frequencies of the components or systems to which these sensors are bonded. The FPC developed herein has been subjected to temperatures up to nearly 800°C while tack-welded to a tubular test specimen. Even at the highest temperatures, the measured resonant frequencies compared well with those obtained using an accelerometer that was bonded to an unheated portion of the specimen. The FBG array was tested in multiple bonding configurations to a tubular test specimen, all at room temperature, with the understanding that high temperature (i.e., type II) FBGs could be used to obtain similar data at high temperatures; the FBG array data were validated with noncontact laser vibrometry, which is being used at Los Alamos National Laboratory to relate acoustic signatures to component stresses and/or structural defects. The goal of this work is to identify the most promising techniques that are also compatible with operation in a microreactor environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Pinwheel Experiment Tantalum Shot 1 Pre-Shot Report

The purpose of this experimental series is to validate the reactive burn model in the PAGOSA hydrodynamic code. It will also help validate the EOS and Strength models for the aluminum and tantalum cylinders. C4 high explosive (HE) is used to drive an aluminum cylinder into a tantalum sandwiched PBX‐9501. The experiment will provide time of arrival (TOA) data for the burn front in the HE through the metal cylinders using Fiber Bragg Gratings (FBG). Photon Doppler Velocimetry (PDV) will provide shock wave TOA and the velocity of the inward moving cylinder. The PAGOSA code will be used to predict TOA and cylinder wall velocity using PDV and tracers.

36 MATERIALS SCIENCE↗

Fusion Materials Semiannual Progress Report for the Period Ending December 31, 2022

This is the seventy-third in a series of semiannual technical progress reports on fusion materials science activity supported by the Fusion Energy Sciences Program of the U.S. Department of Energy. It covers the period ending December 31, 2022. This report focuses on research addressing the effects on materials properties and performance of exposure to the neutronic, thermal and chemical environments anticipated in the chambers of fusion experiments and energy systems. This research is a major element of the national effort to establish the materials knowledge base for an economically and environmentally attractive fusion energy source. Research activities on issues related to the interaction of materials with plasmas are reported separately. The results reported are the products of a national effort involving a number of national laboratories and universities. A large fraction of this work, particularly in relation to fission reactor irradiations, is carried out collaboratively with partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of fusion materials scientists to the broader fusion community, both nationally and worldwide. This report has been compiled by Stephanie Melton, Oak Ridge National Laboratory. Her efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of WIRE-21 SPND and Optical Fiber Sensor Measurements

The Wireless Instrumented RB Experiment 2021 (WIRE-21) was a highly instrumented experiment designed to test prototype wireless temperature and pressure sensors developed by Westinghouse Electric Corporation (WEC) in the High Flux Isotope Reactor (HFIR). In addition to these sensors, a suite of other sensors was also integrated into the experiment capsule, including various types of distributed optical fiber sensors and self-powered neutron detectors (SPNDs). This report presents an analysis of the data generated by the SPNDs and optical fiber sensors that were tested under the highest reported neutron flux. The distributed optical fiber sensor results demonstrate that F-doped optical fibers, particularly those inscribed with fs fiber Bragg gratings (FBGs), are capable of surviving fast neutron fluences on the order of 1021 n fast /cm 2 at temperatures relevant to light-water reactors (between 200 and 400°C). However, a significant blue-shift in the optical spectra of these sensors was observed over the course of irradiation which cannot be explained based on the current understanding of radiation-induced compaction in fused silica glass. A mechanistic understanding of this drift has not yet been developed and is proposed as future scope under the Advanced Sensors and Instrumentation program. Of the four SPNDs, only one appeared to operate normally during three cycles of irradiation. A radiation transport model of the experiment in HFIR was used to determine time-dependent neutron flux in this SPND and to calculate the neutron sensitivity of the device. Results showed a cycle averaged sensitivity of 1.5 ×10 -22 and 1.4 ×10 -22 A/nν for the first and third cycles of irradiation, respectively. Additional details pertaining to the optical fibers and SPNDs are included herein.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evacuations: Reva Hurwitz, The Red Cross, and Operation Crossroads

On April 1, 1946, an earthquake off Unimak Island, Alaska, generated a tsunami that raced across the Pacific. One of the islands in danger was Kwajalein, the logistical hub for Operation Crossroads. Commodore Ben Wyatt, the U.S. naval commander of the Marshall Islands, ordered the evacuation of “10 Red Cross workers, 19 USO women, 17 native women, 16 male [hospital] patients, four tiny babies, one small boy, and two navy doctors,” to the USS Rockbridge, which then steamed in deep water off the atoll until the danger passed. One of the Red Cross workers, Reva Hurwitz, played bridge in the ship’s wardroom until 2 a.m., a luxury since the island curfew, strictly enforced, was 10:30 pm. The tsunami bypassed Kwajalein, and everyone returned to the island less than twenty-four hours after being evacuated. Although the evacuation proved unnecessary, the women were grateful, said Hurwitz, because they had the opportunity “to use hot water and eat fresh fruit.”

99 GENERAL AND MISCELLANEOUS↗

Probing coherence in nanoscale energy transport with high spatial-temporal resolution. Final Technical Report for DOE Award Number DE-SC0019244

The overarching goal of this project is to understand how the phase coherence of phonons and the interaction of phonons with other microscopic degrees of freedom in nanomaterials, such as 2D materials, can affect the energy transport properties and eventually lead to control of energy transport by manipulating phonon interference and phonon scatterings. On the computational side, we are developing and applying first-principles methods to study emerging phonon properties in nanomaterials, including coherent phonons, resonant bonding and gate-tunable phonon-electron scatterings, which hold the promise of enabling significant tunability of energy transport processes with external fields for a wide range of applications. On the experimental side, we are developing ultrafast transient grating spectroscopy and scanning ultrafast electron microscopy (SUEM) to directly probe the coherent phonon transport and phonon-electron interaction processes in nanomaterials with high combined spatial-temporal resolutions. This program will not only provide new insights into the microscopic transport and interaction processes of fundamental energy carriers, but also open new venue towards energy-relevant applications such as thermal switches and coherent energy harvesters.

42 ENGINEERING↗

Summary of October 2023 ARM User Executive Committee Meeting

The User Executive Committee (UEC) provides objective, timely feedback to the leadership of the Atmospheric Radiation Measurement (ARM) user facility with respect to the user experience. The UEC held a hybrid meeting at the ARM Southern Great Plains Observatory in October 2023. Four goals were identified for this meeting: (1) to take an in-depth look at the ARM user facility, (2) to provide actionable items to ARM within the context of the UEC subgroups, (3) to develop new user engagement strategies, and (4) to see an ARM facility in operation, providing valuable context for future UEC discussions. The outcomes of the successful meeting are highlighted in this report. The UEC is grateful to ARM for facilitating this in-person meeting and to our gracious hosts at SGP.

54 ENVIRONMENTAL SCIENCES↗

Mid-IR UAV-based sensing platform with deep learning to Identify and Quantify Gaseous Emission in Gas Flares

This report details the development and evaluation of a Mid-Infrared (Mid-IR) Unmanned Aerial Vehicle (UAV)-based sensing platform integrated with deep learning algorithms for the identification and quantification of gaseous emissions in gas flares. The project, spearheaded by Omega Optics, Inc., aimed to address environmental monitoring challenges by leveraging advanced photonic technologies and autonomous UAV operations. The research focused on designing, optimizing, and fabricating photonic crystal waveguides and grating couplers to enhance the sensitivity and accuracy of gas detection. A comprehensive drone-based system was developed, featuring a miniaturized sensor, GPS module, and microcontroller communication network for real-time gas concentration monitoring. The system's adaptive sampling algorithm, implemented using the Robot Operating System (ROS), enables autonomous detection and localization of gas emission sources. Preliminary results demonstrate the platform's capability to detect and monitor gas emissions with high precision, cost-effectiveness, and scalability. Future work will expand upon this foundation by introducing 3D wind model-based learning for dynamic environmental conditions and further enhancing the user interface and data processing algorithms to support broader environmental monitoring applications. Overall, this project represents a significant step forward in UAV-based environmental sensing technologies, offering robust solutions for detecting and mitigating the impacts of gaseous emissions on public health and safety.

47 OTHER INSTRUMENTATION↗

Computational Analysis of Hydraulic Capacity of Ohio DOT Catch Basin No. 6 in On-Grade and Sag Locations

Stormwater runoff from streets and highways is typically captured by drainage structures strategically placed when roadways use curb or curb and gutter systems. These structures include catch basins with grates, inlets, or combination grates/inlets that collect and discharge storm water runoff to buried pipe conveyance systems. The performance of these drainage structures is measured in terms of hydraulic efficiency, which is defined as the percentage of flow captured by the basin as compared to the total flow draining to the structure. Understanding the performance of these drainage structures allows for a safe and economical design which prevents flooding along Ohio roadways.

42 ENGINEERING↗

Enhancing Molecular Isotope Detection with a Chirp Tuned Optical Centrifuge

This paper gives a brief experimental overview on creating a chirp-tunable optical centrifuge with the goal of amplifying the isotope shift of a given molecule. Results for this experiment were recorded with a CO 2 plume as the probed material. Beyond amplification of the isotope shift, this technology could be modified to alter magnetic field characteristics of common molecules as well as simulating high temperature gases found in combustion environments. Our specific design uses double mirror and grating stretcher and will include a unique tuning feature for customization of the beam’s red and blue components' temporal chirp, allowing for quick reactivity to varying task requirements. The design and parameters will be discussed, as well as the methods used to model the optical centrifuge. Although this experiment is ongoing, results have been gathered previously that display the efficacy of the optical centrifuge. For the probed CO 2 sample, Raman Shifts centered around a wavenumber of 60 and 275 were recorded with durations of 1000 and 800 picoseconds, respectively.

47 OTHER INSTRUMENTATION↗

Rapid Fabrication of High Frame Rate Multichannel FTIR Spectrometers

Spectrally resolved signals in the short- to mid-wave infrared (SWIR/MWIR) bands at high-temporal resolution are critical for many national security remote sensing missions. Currently available off the shelf technology can achieve either high temporal resolution or high spectral resolution, but rugged instruments that can achieve both simultaneously remain mostly in the realm of one-off R&D projects. This report documents efforts to demonstrate a new technique for designing and building high resolution, high framerate multichannel FTIR (MC-FTIR) spectrometers that operate in the SWIR/MWIR bands. The core optical element in a MC-FTIR spectrometer is an array of statically-tuned lamellar grating interferometers (LGI). In the original MC-FTIR work these arrays were fabricated using a synchrotron x-ray lithography method. We proposed to instead fabricate these LGI arrays using multiphoton lithography (MPL), a 3D printing technique that can fabricate meso-scale structures with sub-micron precision. Although we were able to fabricate LGI arrays of sufficient size using MPL, the realized optical surfaces had unsuitably high optical form errors, precluding their use in a fieldable instrument. Further advancement in MPL technology may eventually enable fabrication of interferometer-grade LGI arrays.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-invasive Pipe Pressure Monitoring for Safeguards

Our project explores a new solution to complement current safeguards toolbox by independently, and noninvasively, determining the pressure inside uranium hexafluoride (UF 6 )-carrying Gas Centrifuge Enrichment Plant (GCEP) pipes. Proof-of-principle, non-invasive pipe pressure monitoring tests were conducted through measurements of hoop and axial strain using an optical-interference dilatometry technique based on fiber Bragg gratings (FBGs) inscribed in the core of telecommunication-type 125 µm diameter optical fibers. The fibers were affixed to commercial stainless steel and aluminum tubes and pipes of the type expected to be found at GCEP’s, each measuring four inches in diameter. When the internal air pressure in the pipes changes their external diameter and length follow, and the pitch in the FBG shrinks and/or expands accordingly. In turn, these changes result in a shift of the light wavelength reflected by the FBGs. Several FBGs physically attached to the pipe, as well as control FBGs not attached, were interrogated during the process using state-of-the-art commercial interrogators that operate on swept-wavelength laser technology. Strains measured were contrasted against calculations based on the known elastic and mechanical properties of the pipes. Good agreement is found, and strategies are proposed for further improvement of the experimental resolution as well as future implementation of this novel approach for GCEP safeguards.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Prototyping of 2D and 3D photonic nanodevices by Electron Beam Lithography (CRADA Final Report)

Team developed a large area and fast electron beam lithographic for patterning visible wavelength optical materials to create 2 or 3 dimensional gratings and metasurfaces. Metasurfaces,are arrays of nanoantennas or optical resonators, are dielectric or plasmonic structures that allow control of the amplitude, phase, and polarization of light by locally modulating its wavefront The team was able to write a 1cm2 pattern with resolution better than 30 nm without visible discontinuities in the pattern. Performance to this specification allowed prototyping of optical lenses for production applications such as augmented reality goggles (optical displays) and other applications for visible light manipulations

36 MATERIALS SCIENCE↗

Novel High Resolution High Temperature In-Line Sensors for Steel Manufacturing

To support efficiency, productivity, yield improvements, and future industry 4.0 and SMART manufacturing objectives for a competitive and prosperous steel industry, this program has embarked on an effort to develop, demonstrate and deploy several novel sensing technologies based on fiber optics for use in production steel facilities. Over the duration of this program, our team has successfully demonstrated three of these technologies: (1) near continuous Rayliegh Scattering optical frequency domain reflectometry (OFDR) sensing with single mode silica fibers for temperature sensing to 700 C, (2) semi-distributed fiber Bragg grating (FBG) sensing with multimode sapphire fibers for temperature sensing to >1600 C, and (3) remote in-situ Raman analysis for slag and flux chemistry analysis at steelmaking temperatures >1550 C. Each of these sensor and interrogation systems was developed, refined, and tested in our labs at Missouri S&T and then successfully deployed at SSAB’s production facilities at two sites, one in Montpelier, IA and one in Mobile, AL.

36 MATERIALS SCIENCE↗

Fusion Materials Semiannual Progress Report for the Period Ending June 30, 2024

This is the seventy-sixth in a series of semiannual technical progress reports on fusion materials science activity supported by the Fusion Energy Sciences Program of the U.S. Department of Energy. It covers the period ending June 30, 2024. This report focuses on research addressing the effects on materials properties and performance of exposure to the neutronic, thermal and chemical environments anticipated in the chambers of fusion experiments and energy systems. This research is a major element of the national effort to establish the materials knowledge base for an economically and environmentally attractive fusion energy source. Research activities on issues related to the interaction of materials with plasmas are reported separately. The results reported are the products of a national effort involving a number of national laboratories and universities. A large fraction of this work, particularly in relation to fission reactor irradiations, is carried out collaboratively with partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of fusion materials scientists to the broader fusion community, both nationally and worldwide. This report has been compiled by Stephanie Melton, Oak Ridge National Laboratory. Her efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged.

36 MATERIALS SCIENCE↗

6G Sparse Transmitarray

This powerpoint presents a sparse transmitarray design for 6G technology. The proposed approach leverages aperiodic arrays with large inter-element spacings, offering grating lobe-free operation, enhanced gain, and narrow beamwidths. The transmitarray topology, designed for sub-THz and THz frequencies, simplifies feed-network complexity, and minimizes losses. Numerical analysis and full wave simulation results show this approach is feasible.

Christian, Thomas Edward↗