SEARCH · Engineering Papers

Results for “GHZ RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Microwave Radiometer: Meteorological Temperature Profiler (raw)

The microwave radiometer profiler (MWRP) provides vertical profiles of temperature, humidity, and cloud liquid water content as a function of height or pressure at approximately 5-minute intervals for nearly all weather conditions. The profiles are derived from measurements of absolute microwave radiances (expressed as "brightness temperatures") obtained at 12 frequencies in the range of 22-30 GHz and 51-59 GHz. The data are useful for input to numerical weather forecast models and others that require continuous, high-temporal-resolution profiles. The microwave radiance measurements are useful for testing models of microwave radiation transfer used to derive the profiles.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1973

Avalanche diodes for the generation of coherent radiation

Solid state devices and characterization, and optimum imbedding networks for realizing best performance were investigated along with a barrier injection transit time diode. These diodes were investigated for possible application as microwave amplifiers and oscillators. Measurements were made of diode noise figures in the frequency ranges of 4 - 6 GHz. Initial results indicate that a noise figure of 6 - 8 db may be possible. Optimum device structure and fabrication techniques necessary for low noise performance were investigated. Previously published documents on electrodynamics are included.

Penfield, P., Jr.↗

NASA NTRS1975

Electromagnetic wave propagation in a magneto-plasma filled coaxial structure. I - Theoretical. II - Experimental

This study is concerned with the problem of electromagnetic wave propagation in a magneto-plasma filled coaxial structure. The problem is formulated using the classical boundary value problem approach. A numerical investigation shows the existence of propagating slow modes, backward modes, a quasi-TEM mode, and waveguide-type modes in a magneto-plasma filled coaxial structure. Dispersion curves for these different modes are presented. Measurements have been made of electromagnetic propagation in a coaxial electrode structure filled with longitudinally magnetized plasma. The annular plasma region had a 9.55 cm outer diameter, a 3.82 cm inner diameter and was approximately 60 cm long. A magnetic field of 300 gauss was employed. Electromagnetic wave frequencies were in the range .5 to 2.4 GHz. The plasma was generated by a continuous glow discharge. The resulting dispersion curves closely follow the predicted curves for the quasi-TEM mode.

Askins, H. W., Jr.↗

NASA NTRS1975

Effects of roughness on the radar response to soil moisture of bare ground

The radar response to soil moisture content was experimentally determined for three different bare fields with considerably different surface roughnesses at eight frequencies in the 2 to 8 GHz band and for Horizontal transmit-Horizontal receive (HH) and Vertical transmit-Vertical receive (VV) polarizations. Analysis of the data indicated that the effect of roughness on the radar backscattering coefficient can be minimized by proper choice of the radar parameters. If, in addition, sensitivity to soil moisture variations and system design constraints are considered, the following radar parameters for an operational soil moisture mapper are recommended: frequency= 4 GHz, angle of incidence range= 7 deg to 15 deg and either HH or VV polarization. The corresponding sensitivity is about 0.25 db/ 0.01 gram/cubic cm.

Batlivala, P. P.↗

NASA NTRS1977

Advanced thermionic converter developments with microwave external pumping

This work reports ion generation in a cesium thermionic converter as part of advanced-model thermionic converter development research. A microwave with frequency in the range between 1-2 GHz is used to externally pump a thermionic converter as part of our effort in the verification of Lam's theory. It is found that the motive peak as predicted in the theory disappears whenever microwave power is used to excite the cesium plasma of the converter. The electron temperature is effectively heated by the microwave and the experimental data agrees with theory in the low-power output region.

Chiu, H. S.↗

NASA NTRS1978

The SETI Radio Observational Project - Strategy, instrumentation, and objectives

The paper describes strategies, tradeoffs, instrumentation, and overall objectives for the SETI Radio Observation Project. Novel approaches have been formulated in order to achieve coverage of the desirable frequency and spatial regimes (about 80% of the sky and in the frequency range of 1.4-25 GHz). A mixed strategy has been developed which uses the survey capability of small antennas and the sensitivity of modern maser amplifiers to achieve sensitivities comparable to those reached by previous observers, but with as much as 10,000 times the scope of both the frequency and spatial coverage possible to those experimenters.

Edelson, R. E.↗

NASA NTRS1979

Pattern measurements of a low-sidelobe horn antenna

The techniques and results of measuring the power pattern of a corrugated horn antenna designed for low sidelobes to levels 90 dB below the main beam maximum on both the E- and H- planes are presented. The study was motivated by a requirement for an antenna with very low side lobes to measure properties of the cosmic microwave background radiation from a satellite. The particular application calls for horn antennas of approximately 7 deg beamwidth, operating at discrete frequencies in the range of 20-90 GHz. It is demonstrated that the side lobes of horn antennas can be measured to significantly lower levels than has been achieved previously. Finally, it is noted that an improvement could be achieved by allowing for longer signal integrations and incorporating a switched reference measurement scheme to enable the accurate determination of very low signal levels.

Janssen, M. A.↗

NASA NTRS1980

Sub mm laser local oscillators: Design criteria and results

Diagnostic results are given of the spectral features and the power conversion efficiency of submillimeter (SMM) laser local oscillators. Several criteria are obtained for the design of frequency stable and efficient smm lasers for local oscillator applications. Finally, a design is described and results on the power output and power and frequency stability are given. The mode pattern is very close to a Gaussian profile so that efficient coupling to a quasioptical mixer is possible. The laser provides sufficient output power at a large number of lines to drive the mixer into the low conversion loss regime. Radiometric integration times of several minutes with a spectral resolution of 1 MHz will be possible. With present state-of-the-art Schottky mixers and low noise preamplifiers a radiometric temperature resolution of a few K can be expected over a spectral range from 500to 900 GHz.

Koepf, G. A.↗

NASA NTRS1982

Mechanics aspects of NDE by sound and ultrasound

Nondestructive evaluation (NDE) is considered as a means to detect the energy release mechanism of defects and the interaction of microstructures within materials with sound waves and/or ultrasonic waves. Ultrasonic inspection involves the frequency range 20 kHz-1 GHz with amplitudes depending on the sensitivity of the test instrumentation. Pulse echo systems are most frequently used in NDE. Information is extracted from the signals through measurements of the signal velocity, attenuation, the acoustic emission when stress is applied, and calculation of the acoustoelastic coefficients. Fracture properties, tensile and shear strengths, the interlaminar shear strength, the cohesive strength, yield and impact strengths, the hardness, and the residual stress can be assayed by ultrasonic methods. Finally, attention is given to analytical treatment of the derived data, with mention given to transition matrix, integral equation, and eigenstrain approaches.

Fu, L. S.↗

NASA NTRS1987

Microwave surface resistance of reactively sputtered NbN thin films

The surface resistance of niobium nitride (NBN) thin films was measured at 7.78 and 10.14 GHz in the temperature range of 1.5 to 4.2 K. The films were reactively sputtered on sapphire substrates to a thickness of approximately 1 micron. The surface resistance was determined by measuring the quality factor (Q) of the TE sub 011 mode of a lead-plated copper cavity where the NbN served as one end-cap of the cavity.

Bautista, J. J.↗

NASA NTRS1987

Research in millimeter wave techniques

The areas of millimeter wave (MMW) research include atmospheric propagation and radiometry, advanced MMW component design with emphasis on quasi-optical techniques, and the development of MMW receivers, especially those using subharmonic mixers. Calculations of atmospheric attenuation and radiometric antenna temperature were made in the range 100 to 700 GHz, together with measurements of atmospheric antenna temperature near 95 and 183 GHz. Quasi-optical components designed include lenses, mirrors, and wire grid devices, as well as feedhorns for interference with waveguide components. Subharmonic mixers with state-of-the-art performance at 183 GHz were also developed. Each of these areas of research is summarized.

Mcmillan, R. W.↗

NASA NTRS1986

The NASA SETI program at JPL

The NASA All Sky Survey strategy for detecting signals of extraterrestrial origin is examined. The All Sky Survey observes the entire celestial sphere, covers a frequency range of 1-10 Ghz, and has spatial direction and frequency coverage. The survey time is dependent on the area of the sky surveyed, the telescope diameter, scan rate, the angular separation of the scans, the bandwidth of the receiver, and the frequency coverage. The distance at which a transmitter can be detected for a given sensitivity is analyzed. The interaction between scan strategy and various accumulation strategies and its effect on the sensitivity of the survey are investigated using field tests. A diagram of the SETI Sky Survey observational system is provided.

Gulkis, Sam↗

NASA NTRS1989

Microwave microstrip resonator measurements of Y1Ba2Cu3O(7-x) and Bi2Sr2Ca1Cu2O(8-y) thin films

Radio frequency (RF) surface resistance measurement experiments on high T(sub c) thin films were performed. The method uses a microstrip resonator comprising a top gold conductor strip, an alumina dielectric layer, and a separate superconductivity ground plane. The surface resistance of the superconducting ground plane can be determined, with reference to a gold calibration standard, from the measured quality factor of the half-wave resonator. Initial results near 7 GHz over the temperature range from 25 to 300 K are presented for YBa2Cu3O(7-x) and Bi2Sr2CaCu2O(8-y) thin film samples deposited by an electron beam flash evaporation process. The RF surface resistance at 25 K for both materials in these samples was found to be near 25 milliohms.

Lichtenberg, Christopher L.↗

NASA NTRS1990

Coplanar waveguide discontinuities for P-I-N diode switches and filter applications

A full wave space domain integral equation (SDIE) analysis of coplanar waveguide (CPW) two port discontinuities is presented. An experimental setup to measure the S-parameters of such discontinuities is described. Experimental and theoretical results for CPW realizations of pass-band and stop-band filters are presented. The S-parameters of such structures are plotted in the frequency range 5 to 25 GHz.

Dib, N. I.↗

NASA NTRS1990

Microwave conductivity of laser ablated YBaCuO superconducting films and its relation to microstrip transmission line

The discovery of high temperature superconductor oxides has raised the possibility of a new class of millimeter and microwave devices operating at temperatures considerably higher than liquid helium temperatures. Therefore, materials properties such as conductivity, current density, and sheet resistance as a function of temperature and frequency, possible anisotropies, moisture absorption, thermal expansion, and others, have to be well characterized and understood. The millimeter wave response was studied of laser ablated YBa2Cu3O(7-x)/LaAlO3 thin films as a function of temperature and frequency. In particular, the evaluation of their microwave conductivity was emphasized, since knowledge of this parameter provides a basis for the derivation of other relevant properties of these superconducting oxides, and for using them in the fabrication of actual passive circuits. The microwave conductivity for these films was measured at frequencies from 26.5 to 40.0 GHz, in the temperature range from 20 to 300 K. The values of the conductivity are obtained from the millimeter wave power transmitted through the films, using a two fluid model.

Bhasin, K. B.↗

NASA NTRS1989

Microwave response of a HEMT photoconductive detector

Interdigitated photoconductive detectors with 5-micron geometry have been fabricated on HEMT material and their optical response characteristics at 820 nm have been examined at dc and in the frequency range of 2-8 GHz. These have been compared with characteristics of similar 1-micron devices on MESFET material. The shapes of the frequency responses were found to differ, but the useful bandwidth of both types of devices was found to be similar.

Claspy, P. C.↗

NASA NTRS1990

Coplanar-waveguide/microstrip probe coupler and applications to antennas

A method to couple microwave power from a coplanar waveguide to a microstrip line on opposite sides of a ground plane is demonstrated. The coupler uses a metallic post which passes through an aperture on the ground plane connecting the strip conductor of the coplanar waveguide to the microstrip line. The measured insertion loss and return loss are about 1 dB and 10 dB, respectively, across the frequency range of 0.045-6.5 GHz. To demonstrate potential applications of the coupler as a feeding network for a microstrip patch array, measured radiation patterns of two rectangular patch antennas with a direct coplanar-waveguide/microstrip feed and with a proximity coupled coplanar-waveguide/microstrip feed are presented.

Simons, R. N.↗

NASA NTRS1991

Microwave conductivity of laser ablated YBa2Cu3O(7-delta) superconducting films and its relation to microstrip transmission line performance

The discovery of high temperature superconductor oxides has raised the possibility of a new class of millimeter and microwave devices operating at temperatures considerably higher than liquid helium temperatures. Therefore, materials properties such as conductivity, current density, and sheet resistance as a function of temperature and frequency, possible anisotropies, moisture absorption, thermal expansion, and others, have to be well characterized and understood. The millimeter wave response of laser ablated YBa2Cu3O(7-delta)/LaAlO3 thin films was studied as a function of temperature and frequency. In particular, the evaluation of their microwave conductivity was emphasized, since knowledge of this parameter provides a basis for the derivation of other relevant properties of these superconducting oxides, and for using them in the fabrication of actual passive circuits. The microwave conductivity for these films was measured at frequencies from 26.5 to 40.0 GHz, in the temperature range from 20 to 300 K. The values of the conductivity are obtained from the millimeter wave power transmitted through the films, using a two fluid model.

Bhasin, K. B.↗