Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Rod Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

2014 Semi-Annual Progress Letter Report on Used Nuclear Fuel Integrity Study in Transportation Environments

The objective of this project is to perform a systematic study on UNF (Used Nuclear Fuel) integrity under simulated transportation environments by using enabling hot-cell testing technology developed recently at ORNL, CIRFT (Cyclic Integrated Reversible-Bending Fatigue Tester) [1-9]. Out-of-cell study will support the ongoing ORNL hot-cell or in-cell testing. Although the use of CIRFT on H. B. Robinson UNF rods generated many interesting data, a number of important issues remain to be addressed arising from the test system and the rod itself. It has been shown that a direct examination of some of these issues in the hot-cell is prohibitive due to high cost and access limitations. The out-of-cell study has been demonstrated to be cost effective and much more feasible to provide quick turn-around solutions. A testing system with the same configuration as that of CIRFT used in hot-cell has been proposed to study the emerging issues from hot-cell testing and also to investigate the fatigue and failure mechanisms of UNF rods that cannot be identified directly with in hot-cell testing. The developments of hardware and software, test protocol, and hot-cell data analysis will be discussed in this report.

Normal Transportation↗

Development of pebble-based extruded carbon rods for extreme plasma heat flux environments

This work presents first experiments toward the development of continuously renewable (extrudable) pebble-based carbon rods for use as plasma-facing components in extreme steady-state plasma flux environments. The primary envisioned application of this work is a first wall that can survive long-term in future magnetic fusion power reactors while also improving recovery of the reactor fuel (tritium and deuterium atoms). Bench tests applying extreme steady-state front-surface heat loads of up to 50 MW/m 2 are presented. Continuous pebble rod front-surface recession and intact pebble recovery are successfully demonstrated, at a rate of order 0.2 cm/s. Numerical simulations of the pebble rod front-surface recession are able to match observations reasonably well, indicating that the recession mechanism can be understood as occurring due to pebble thermal expansion and resulting shock and cracking of the inter-pebble binder. Tests of the pebble rod extrusion demonstrate that friction between the rods and the stainless-steel extrusion channel is tolerably low (<50 N for the expected channel length) over a wide range of temperatures. Front-surface outgassing rates below 1000 Torr L/s/m 2 are achieved, believed to be sufficiently low for use in magnetic fusion reactors. In conclusion, initial parametric scans over pebble rod size and binder fraction to vary front-surface recession rates are presented.

36 MATERIALS SCIENCE↗

Model biases in high-burnup fast reactor simulations

A new code system called the Advanced Reactor Modeling Interface (ARMI) has been developed that loosely couples multiscale, multiphysics nuclear reactor simulations to provide rapid, user-friendly, high-fidelity full systems analysis. Incorporating neutronic, thermal-hydraulic, safety/transient, fuel performance, core mechanical, and economic analyses, ARMI provides 'one-click' assessments of many multi-disciplined performance metrics and constraints that historically require iterations between many diverse experts. The capabilities of ARMI are implemented in this study to quantify neutronic biases of various modeling approximations typically made in fast reactor analysis at an equilibrium condition, after many repetitive shuffles. Sensitivities at equilibrium that result in very high discharge burnup are considered ( and >20% FIMA), as motivated by the development of the Traveling Wave Reactor. Model approximations discussed include homogenization, neutronic and depletion mesh resolution, thermal-hydraulic coupling, explicit control rod insertion, burnup-dependent cross sections, fission product model, burn chain truncation, and dynamic fuel performance. The sensitivities of these approximations on equilibrium discharge burnup, k{sub eff}, power density, delayed neutron fraction, and coolant temperature coefficient are discussed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity Analysis of Lbloca In Response To 10 Cfr50.46c New Rulemaking

The Nuclear Regulatory Commission (NRC) is proposing a new rulemaking on emergency core system/loss-of-coolant accident (LOCA) performance analysis. In the proposed rulemaking, designated as 10 CFR 50.46c, the US NRC puts forward an equivalent cladding oxidation criterion as a function of cladding pre-transient hydrogen content. The proposed rulemaking imposes more restrictive and burnupdependent cladding embrittlement criteria; consequently more fuel rods need to be analyzed under LOCA conditions to maintain the safety margin, in contrast to the current practice with which only one hot rod needs to be analyzed. New multi-physics analysis methods are required to provide a thorough characterization of the reactor core in order to identify the locations of the limiting rods and quantify safety margins under LOCA conditions. The U.S. DOE’s Light Water Reactor Sustainability (LWRS) Program has initiated a project to develop multi-physics analytical capabilities, called LOTUS, to support the industry in the transition to the proposed rule. An approach to uncertainty quantification and sensitivity analysis with LOTUS was developed. A typical four-loop PWR plant model was developed and simulated by RELAP5-3D with inputs generated from core design and fuel performance analyses, and uncertainty quantification and sensitivity analysis were performed with seventeen uncertain input parameters. The maximum equivalent cladding reacted ratio (ECRR) and peak clad temperature ratio (PCTR) were selected as the figures of merit (FOM). Pearson, Spearman, partial correlation coefficients, and Sobol indices were considered for all of the figures of merit in the sensitivity analysis.

10CFR50.46c↗

Research in Support of TREAT Kinetics Calculations Using Rattlesnake/BISON Coupling Within MAMMOTH

This paper summarizes key aspects of research in evaluation of modeling needs for TREAT transient simulation. Using measured data from transient experiments performed circa 1959 in a small, test core used for startup testing, MAMMOTH multi-physics simulations are per-formed to simulate the core transient behavior. MAMMOTH uses internal libraries from Rattlesnake for time-dependent transport calculations, BISON for fuel performance calcula-tions and the MOOSE multi-physics framework to perform strongly coupled calculations to properly characterize the three-dimensional temperature-driven kinetics performance of the core during rapid power excursions. Early calculations were able to match the general shape of measured transient data but under-predicted peak power. Closer examination of the phys-ics of the core and uncertainty associated with rod positioning led to calculations in which the best estimate of the actual measured reactor period was modeled. This correction resulted in outstanding agreement between measurements and coupled multi-physics simulation results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Selection and Ranking of Experiments from the Halden Database in support of Multiscale Model Validation

Validating fuel performance codes, such as BISON, requires an extensive amount of experiments covering a wide range of operating conditions and fuel types. Within the light-water reactor (LWR) space, there have been several international experimental programs that have contributed to the wealth of available experimental data available for use. One of those international programs, the Halden Reactor Project (HRP), began in 1958 and utilized the Halden Boiling Water Reactor to conduct many highly instrumented experiments until the reactor closed in 2018. Idaho National Laboratory, through the U.S. Department of Energy, has utilized several Halden experiments to perform the initial validation of the BISON code based upon their inclusion in international modeling and simulation benchmarks. Recently, the HRP has provided member organizations a complete copy of all available data, reports, and presentations since the HRP began. This report provides an initial exploration of the data available in the database for use in validating the multiscale models under development in the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program for LWR applications. Ranking tables that identify potential validation cases are provided for the high priority models of interest. It was found that some of the recommended high priority experiments correspond to additional rods in existing assemblies already available in the BISON validation suite. It is expected that several of these cases will be incorporated into future NEAMS milestones in the fuels technical area for increased validation of BISON.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MODELING A SPENT NUCLEAR FUEL CASK SEISMIC TEST

The US Department of Energy Spent Fuel and Waste Science and Technology (SFWST) program is planning to conduct a series of full-scale shake table tests to simulate hypothetical earthquake conditions and record the response of surrogate spent nuclear fuel (SNF) assemblies in a canister dry storage system mockup. The shake table motions will represent a range of hypothetical earthquake conditions at hypothetical locations in the continental US to generally define the range of mechanical loads that SNF can be expected to experience during extended dry storage periods. The earthquake conditions will represent seismic hazards in the 2,000-to-20,000-year return period range. The test will use instrumented pressurized water reactor fuel assemblies with surrogate mass inside the fuel rods instead of radioactive fuel pellets. Dummy assemblies with similar mass and dimensions to actual fuel assemblies will occupy the rest of the fuel assembly locations in a SNF canister that holds 32 fuel assemblies. The canister will be located inside a mockup vertical concrete cask. Instrumentation will record the motion of the major components of the complex dynamic system, and strain gauges will be used to record the cladding strain at select locations. Preparations for the test require modeling predictions to identify the range of response of the system and to help select specific earthquake cases to be simulated on the shake table from a large set of potential cases. This paper describes the pretest nonlinear finite element modeling efforts that have been completed to date, including cask system level modeling and fuel assembly modeling in LS-DYNA. The cask system level models are critical for anticipating sliding or tipping of an unanchored cask during the test. The fuel assembly model is needed to estimate the range of cladding strain response and fuel assembly structural response to be expected during the test and cladding strain measurements will be key metrics for model validation and the development of modeling best practices after the test is concluded.

Klymyshyn, Nicholas A.↗

Re-evaluation of Spent Nuclear Fuel Assay Data for the Three Mile Island Unit 1 Reactor and Application to Code Validation

Destructive radiochemical assay measurements of spent nuclear fuel rod segments from an assembly irradiated in the Three Mile Island unit 1 (TMI-1) pressurized water reactor have been performed at Oak Ridge National Laboratory (ORNL). Assay data are reported for five samples from two fuel rods of the same assembly. The TMI-1 assembly was a 15 X 15 design with an initial enrichment of 4.013 wt% 235 U, and the measured samples achieved burnups between 45.5 and 54.5 gigawatt days per metric ton of initial uranium (GWd/t). Measurements were performed mainly using inductively coupled plasma mass spectrometry after elemental separation via high performance liquid chromatography. High precision measurements were achieved using isotope dilution techniques for many of the lanthanides, uranium, and plutonium isotopes. Measurements are reported for more than 50 different isotopes and 16 elements. One of the two TMI-1 fuel rods measured in this work had been measured previously by Argonne National Laboratory (ANL), and these data have been widely used to support code and nuclear data validation. Recently, ORNL provided an important opportunity to independently cross check results against previous measurements performed at ANL. The measured nuclide concentrations are used to validate burnup calculations using the SCALE nuclear systems modeling and simulation code suite. These results show that the new measurements provide reliable benchmark data for computer code validation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multi-Physics Simulation of The TRIGA Reactor

In nuclear engineering, the description of phenomena occurring in the core involves a coupling between neutronic and thermal hydraulics through the so called reactivity or thermal feedback. In water cooled reactor, thermal feedback and temperature coefficients of reactivity are important, when temperature changes, microscopic cross sections change as well impacting directly the neutron flux and so the thermal power. Other feedback, such as the variation of the macroscopic cross section due to a modification of the density can also have a significant impact on the core performance of the reactor. Those reasons were naturally leading in the development of coupling method in order to predict correctly the behaviour of the core in normal operation and accidental situation. This work describes the coupling scheme developed for the description of the TRIGA mark II reactor at JSI. The demonstration case presented here, the reactor is operating in steady state configuration at several power levels. The aim of our calculation was, for a given thermal power of the reactor, to numerically reproduce fuel temperature value monitored during reactor operation. The expected impact of the control rod on the neutron flux distribution was also verified. The predictions of the coupling scheme seem to be correct according to the few temperature measurements available and the expected neutron flux behaviour expecting from a control rod motion. We are considering precise measurement of the fuel temperature at more positions but also in the coolant channels between the fuel elements to complete the experimental validation phase. An upgrade of the coupling scheme into the transient mode is also considered to observe self-stabilisation of the power level, after a control rod perturbation, due to the negative temperature reactivity coefficient of the fuel. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

BISON Theory Manual The Equations behind Nuclear Fuel Analysis

BISON is a finite element-based nuclear fuel performance code applicable to a variety of fuel forms including light water reactor fuel rods, TRISO particle fuel, and metallic rod and plate fuel. It solves the fully-coupled equations of thermomechanics and species diffusion, for either 2D axisymmetric or 3D geometries. Fuel models are included to describe temperature and burnup dependent thermal properties, fission product swelling, densification, thermal and irradiation creep, fracture, and fission gas production and release. Plasticity, irradiation growth, and thermal and irradiation creep models are implemented for clad materials. Models are also available to simulate gap heat transfer, mechanical contact, and the evolution of the gap/plenum pressure with plenum volume, gas temperature, and fission gas addition. BISON is based on the MOOSE framework and can therefore efficiently solve problems using standard workstations or very large high-performance computers. This document describes the theoretical and numerical foundations of BISON.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of the SHARP Toolkit to Sodium-Cooled Fast Reactor Challenge Problems

The Simulation-based High-efficiency Advanced Reactor Prototyping (SHARP) toolkit is under development by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign of the U.S. Department of Energy, Office of Nuclear Energy. To better understand and exploit the benefits of advanced modeling simulations, the NEAMS Campaign initiated the “Sodium-Cooled Fast Reactor (SFR) Challenge Problems” task, which include the assessment of hot channel factors (HCFs) and the demonstration of zooming capability using the SHARP toolkit. If both challenge problems are resolved through advanced modeling and simulation using the SHARP toolkit, the economic competitiveness of a SFR can be significantly improved. The efforts in the first year of this project focused on the development of computational models, meshes, and coupling procedures for multi-physics calculations using the neutronics (PROTEUS) and thermal-hydraulic (Nek5000) components of the SHARP toolkit, as well as demonstration of the HCF calculation capability for the 100 MWe Advanced Fast Reactor (AFR-100) design. Testing the feasibility of the SHARP zooming capability is planned in FY 2018. The HCFs developed for the earlier SFRs (FFTF, CRBR, and EBR-II) were reviewed, and a subset of these were identified as potential candidates for reduction or elimination through high-fidelity simulations. A one-way offline coupling method was used to evaluate the HCFs where the neutronics solver PROTEUS computes the power profile based on an assumed temperature, and the computational fluid dynamics solver Nek5000 evaluates the peak temperatures using the neutronics power profile. If the initial temperature profile used in the neutronics calculation is reasonably accurate, the one-way offline method is valid because the neutronics power profile has weak dependence on small temperature variation. In order to get more precise results, the proper temperature profile for initial neutronics calculations was obtained from the STAR-CCM+ calculations. The HCFs of the peak temperatures at cladding outer surface, cladding inner wall surface, and fuel centerline induced by cladding manufacturing tolerance and uncertainties on the cladding, coolant, and fuel properties were evaluated for the AFR-100. Some assessment on the effect of wire wrap configuration and size of the bundle shows that it is practical to use the 7-pin bare rod bundle to calculate the HCFs. The resulting HCFs obtained from the high-fidelity SHARP calculations are generally smaller than those developed for the earlier SFRs because the most uncertainties involved in the modeling and simulations were disappeared. For completeness, additional investigations are planned in FY 2018, which will use random sampling techniques.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Verification of plutonium content in spent fuel assemblies using neutron self-interrogation

The large amounts of plutonium in reactor spent fuel assemblies has led to increased research directed toward the measurement of the plutonium for safeguards verification. The high levels of fission product gamma-ray activity and curium neutron backgrounds have made the plutonium measurement difficult. We have developed a new technique that can directly measure both the {sup 235}U concentration and the plutonium fissile concentration using the intrinsic neutron emission fronl the curium in the fuel assembly. The passive neutron albedo reactivity (PNAR) method has been described previously where the curium neutrons are moderated in the surrounding water and reflect back into the fuel assembly to induce fissions in the fissile material in the assembly. The cadmium (Cd) ratio is used to separate the spontaneous fission source neutrons from the reflected thermal neutron fission reactions. This method can measure the sum of the {sup 235}U and the plutonium fissile mass, but not the separate components. Our new differential die-away self-interrogation method (DDSI) can be used to separate the {sup 235}U from the {sup 239}Pu. The method has been applied to both fuel rods and full assemblies. For fuel rods the epi-thermal neutron reflection method filters the reflected neutrons through thin Cd filters so that the reflected neutrons are from the epi-cadmium energy region. The neutron fission energy response in the epi-cadmium region is distinctly different for {sup 235}U and {sup 239}Pu. We are able to measure the difference between {sup 235}U and {sup 239}Pu by sampling the neutron induced fission rate as a function of time and multiplicity after the initial fission neutron is detected. We measure the neutron fission rate using list-mode data collection that stores the time correlations between all of the counts. The computer software can select from the data base the time correlations that include singles, doubles, and triples. The die-away time for the doubles distribution is distinctly different for {sup 235}U and {sup 239}Pu. The {sup 239}Pu has a higher fission cross-section in the epi-cadmium neutron region and larger induced fission moments than {sup 235}U, so the measured die-away time can provide the relative amounts of {sup 239}Pu and {sup 235}U. This paper will present the Monte Carlo simulations for the detector and sample configurations for both fuel pins and full fuel assemblies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Design Study of the Parallel-Slit Ring Collimator for Fast Neutron Emission Tomography of Spent Fuel

For the past 18 months, Oak Ridge National Laboratory has been developing a passive fast-neutron emission tomography capability. The goal of this development is a new passive capability to detect diversion of single fuel pins (rods) from spent or used nuclear fuel assemblies by performing neutron emission tomography. At present, a laboratory prototype imager is under construction. The purpose of the prototype imager is to demonstrate imaging capability sufficient to resolve individual fuel pins in a spent nuclear fuel assembly. This report documents the results of simulation studies to optimize the design of the prototype imager.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The ultimate response guideline simulation and analysis by using TRACE/FRAPTAN for Chinshan Nuclear Power Plant

TRACE and FRAPTRAN models of Chinshan BWR/4 nuclear power plant (NPP) were established for the ultimate response guideline (URG) simulation and analysis. The depressurization of the reactor, low pressure water injection of the reactor, and containment venting are the main actions of URG. This research focuses to evaluate the URG utility under Fukushima-like conditions. This study consists of three steps. The first step is the establishment of TRACE and FRAPTRAN models. The second step is the URG simulation and analysis under Fukushima-like conditions by using TRACE model. In this step, the no URG case was also performed in order to evaluate the URG effectiveness. Additionally, the sensitivity study of URG and the required raw water injection were performed. The final step is the fuel rod analysis of FRAPTRAN for the above cases. According to TRACE results, the URG can keep the peak cladding temperature (PCT) below the criteria 1088.7 K under Fukushima-like conditions. It indicates that Chinshan NPP can be controlled in a safe situation. If Chinshan NPP does not perform the URG under Fukushima-like conditions, the water level may drop lower than TAF (top of active fuel) which may result in the generation of the safety issue about the fuel rods. FRAPTRAN results depicted that zirconium-water reaction generated in no low pressure water injection cases. It may cause a safety issue in fuel rods. And, the actions of URG affected the performance of fuel rods according to FRAPTRAN results. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Coupled Calculations of the NuScale FIV Tests – Pre-test Simulations and Sensitivity Analysis

The NEAMS program aims to develop an integrated multi-physics simulation capability “pellet-to-plant” for the design and analysis of future generations of nuclear power plants. In particular, the Reactor Product Line code suite's multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. Flow-induced vibration (FIV) is widespread problem in energy systems because they rely on fluid movement for energy conversion. Vibrating structures may be damaged as fatigue or wear occurs. Given the importance of reliable components in the nuclear industry, flow-induced vibration has long been a major concern in safety and operation of nuclear reactors. In particular, nuclear fuel rods and steam generators have been known to suffer from flow-induced vibration and related failures. Advanced reactors, such as integral Pressurized Water Reactors (PWRs) considered for Small Modular Reactors (SMR), often rely on innovative component designs to meet cost and safety targets. One component that is the subject of advanced designs is the steam generator, some designs of which forego the usual shell-and-tube architecture in order to fit within the primary vessel. A significant amount of data exists on flow-induced vibration in shell-and-tube heat exchangers, and heuristic methods are available to predict FIV based on a set of given assumptions. In contrast, advanced designs have far less data available. Advanced modeling and simulation based on coupled structural and fluid simulations have the potential to predict flow-induced vibration in a variety of designs, reducing the need for expensive experimental programs, especially at the conceptual design stage. Over the past several years, the Reactor Product Line has developed a FIV capability in SHARP. SHARP contains high-fidelity single-physics codes Diablo for structural mechanics and Nek5000 for fluid mechanics calculations. Both codes are state-of-the-art, highly scalable tools that have been extensively validated. In previous reports we have discussed the implementation and validation of an FIV capability for helical steam generators and fuel assemblies. In this report we discuss one-way coupled calculations performed with Nek5000 and Diablo for the NuScale FIV tests. In the turbulent fretting regime one-way coupling is judged to be sufficient because the pressure loads do not cause substantial displacements. It is also the most common source of vibration in helical steam generators per the low flows expected in integral PWRs. The simulations precede the tests, as experimental data was not available at the delivery of this report. Several assumptions had to be made on the support-tube interaction and multiple tests and sensitivity analysis have been performed. Additional work remains to be done and it is discussed in the future work section.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Reactivity effects in VVER-1000 of the third unit of the kalinin nuclear power plant at physical start-up. Computations in ShIPR intellectual code system with library of two-group cross sections generated by UNK code

The ShIPR intellectual code system for mathematical simulation of nuclear reactors includes a set of computing modules implementing the preparation of macro cross sections on the basis of the two-group library of neutron-physics cross sections obtained for the SKETCH-N nodal code. This library is created by using the UNK code for 3D diffusion computation of first VVER-1000 fuel loadings. Computation of neutron fields in the ShIPR system is performed using the DP3 code in the two-group diffusion approximation in 3D triangular geometry. The efficiency of all groups of control rods for the first fuel loading of the third unit of the Kalinin Nuclear Power Plant is computed. The temperature, barometric, and density effects of reactivity as well as the reactivity coefficient due to the concentration of boric acid in the reactor were computed additionally. Results of computations are compared with the experiment.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantification of the importance of the modeling fidelity in the Best Estimate Plus Uncertainty analysis

In this work, the multi-physics coupling of CTF-PARCS for both steady-state and transient simulations is evaluated focusing on the quantification of the importance of the modeling fidelity when applied to the Best Estimate Plus Uncertainty safety analysis. For the steady-state, a Picard iteration approach is adopted in the coupled code while for the transient an explicit approach has been developed as a first step. The CTF-PARCS coupling is applied to the REA at HFP BOC scenario proposed in the exercise I-2c of LWR-UAM benchmark Phase III. Two different modeling choices are investigated for the nominal calculations. The first consists of including the 3D burnup information in CTF, and the second of modeling the spacers grids in both PARCS and CTF. It is observed that due to the degradation of the fuel thermal conductivity, the 3D burnup inclusion in CTF leads to significant higher centerline temperatures than the base case, with a difference up to 300 K. The spacer grids modeling shows the expected power and temperature decrease in the axial positions of the spacer grids. For the uncertainty quantification study, the multi-physics modeling including the burnup information in CTF is used. The results show that the inserted reactivity has a relative standard deviation of 13.6% mainly attributed to the nuclear data. The maximum linear power has a relative standard deviation of 16.2% due to the nuclear data as well, while the maximum centerline temperature has a relative standard deviation of 3.5% primarily caused by the fuel thermal conductivity. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Hydraulic performance evaluation of rod bundle with a concept spacer grid design

In a pressurized water reactor the spacer grid has a great influence on the thermal-hydraulic and mechanical properties of the fuel assembly. In order to improve the overall performance of the fuel assembly, a new concept spacer grid design names CATF with 'non-bending' guide vane is proposed. The hydraulic performance of the CATF grid design is evaluated by using a commercially computational fluid dynamics (CFD) code, ANSYS CFX12.1, and the evaluation result is compared with ordinary spacer grid including bending guide vane. Three dimensional rod bundles including CATF spacer grid and ordinary spacer grid have been simulated. The analysis results show that local resistance coefficient of CATF spacer grid is smaller than that of ordinary spacer grid by about 29.7% because of the non-bending guide vanes. Furthermore, the cross flow strength between subchannels near the outer strap area, the swirl strength and cross flow strength in subchannels near the outer strap area in 1-10 times hydraulic diameter downstream the spacer grid area of the ordinary grid, are larger than that of CATF spacer grid. The two types of spacer grids appear to have the same mixing characteristics in inner-grid area. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗