Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FILMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Electrokinetic Phenomena Enhanced Lithium-Ion Transport in Leaky Film for Stable Lithium Metal Anodes

The application of lithium (Li) metal anodes in Li metal batteries has been hindered by growth of Li dendrite which leads to short cycling life. Here a Li-ion-affinity leaky film as a protection layer is reported to promote a dendrite-free Li metal anode. The leaky film induces electrokinetic phenomena to enhance Li-ion transport, leading to a reduced Li-ion concentration polarization and homogenous Li-ion distribution. As a result, the dendrite-free Li metal anode during Li plating/stripping is demonstrated even at an extremely high deposition capacity (6 mA h cm -2 ) and current density (40 mA cm -2 ) with improved Coulombic efficiencies. A full-cell battery with the leaky-film protected Li metal as anode and high-areal-capacity LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM-811) (~4.2 mA h cm -2 ) or LiFePO 4 (~3.8 mA h cm -2 ) as cathode shows improved cycling stability and capacity retention, even at lean electrolyte conditions.

25 ENERGY STORAGE↗
DOE OSTI2012

ZnO film with ultra-low background electron concentration grown by plasma-assisted MBE using Mg film as the buffer layer

Highlights: ► High quality ZnO film with ultra-low background electron concentration is grown by plasma-assisted molecular beam epitaxy using Mg film as a buffer layer. ► High resolution X-ray diffraction and photoluminescence (PL) spectroscopy indicate a high degree of crystallization. ► Hall measurement shows a carrier concentration as low as ∼10{sup 14} cm{sup −3}. ► The mechanism of the improved crystallinity is discussed in detail. -- Abstract: High quality ZnO epilayer with background electron concentration as low as 2.6 × 10{sup 14} cm{sup −3} was obtained by plasma-assisted MBE on c-sapphire using a thin Mg film as the buffer layer. High-resolution XRD measurement shows a sharp (0 0 2) peak with full width at half maximum (FWHM) of only 0.029°. Photoluminescence spectroscopy presents a weak defect-related near-edge emission. A metal–semiconductor–metal (MSM) typed photodetector based on the material demonstrates a response of ∼43 A/W under the bias of 1 V and an ON/OFF ratio of 10{sup 4}. This un-doped ZnO with ultra-low background electron concentration could be a promising starting material for p-type doping.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Commissioning of a two-target DC cylindrical magnetron sputter coater for depositing Nb 3 Sn film on Nb superconducting radiofrequency cavities

A DC cylindrical magnetron sputter coater was commissioned and used to coat Nb 2.6 GHz superconducting radiofrequency (SRF) cavity with Nb 3 Sn. The sputter coater has two identical cylindrical magnetrons that can move, with a controlled speed, along the axis of the SRF cavity to coat the inside surface of the cavity. The design of the sputter coater is discussed, along with its performance. Initially, a sample holder that allows coating on flat substrates at positions similar to the equator and beam tubes of a 2.6 GHz SRF cavity was used to test conditions for fabricating Nb 3 Sn layers. Multilayers of Nb and Sn were sequentially sputtered on flat Nb and sapphire substrates mounted on the equivalent positions of the cavity's beam tubes and the equator using the two identical cylindrical magnetrons. Then, the Nb/Sn multilayers were annealed at 950 °C for 3 h. Here, the ~1.2 μm thick Nb 3 Sn film did not show any other Nb–Sn compounds and had a superconducting transition temperature of 17.61–17.76 K. The 2.6 GHz SRF cavity was coated using similar conditions as flat samples. Cryogenic RF testing of the Nb 3 Sn-coated cavity demonstrated a quality factor of 3.2 × 10 8 at an accelerating gradient of 5 MV/m at 4.4 K.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Modeling the mechanical properties of ultra-thin polymer films [Structural modeling of films of atomic scale thickness]

A modeling method to extract the mechanical properties of ultra-thin films (10–100 nm thick) from experimental data generated by indentation of freestanding circular films using a spherical indenter is presented. The relationship between the mechanical properties of the film and experimental parameters including load, and deflection are discussed in the context of a constitutive material model, test variables, and analytical approaches. As a result, elastic and plastic regimes are identified by comparison of finite element simulation and experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Hybrid Polymer/Metal–Organic Framework Films for Colorimetric Water Sensing over a Wide Concentration Range [Hybrid Polymer/MOF Films for Colorimetric Water Sensing over a Wide Concentration Range]

Because of their extraordinary surface areas and tailorable porosity, metal–organic frameworks (MOFs) have the potential to be excellent sensors of gas-phase analytes. MOFs with open metal sites are particularly attractive for detecting Lewis basic atmospheric analytes, such as water. Here, we demonstrate that thin films of the MOF HKUST-1 can be used to quantitatively determine the relative humidity (RH) of air using a colorimetric approach. HKUST-1 thin films are spin-coated onto rigid or flexible substrates and are shown to quantitatively determine the RH within the range of 0.1–5% RH by either visual observation or a straightforward optical reflectivity measurement. At high humidity (>10% RH), a polymer/MOF bilayer is used to slow the transport of H 2 O to the MOF film, enabling quantitative determination of RH using time as the distinguishing metric. Lastly, the sensor is combined with an inexpensive light-emitting diode light source and Si photodiode detector to demonstrate a quantitative humidity detector for low humidity environments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible Oxidation Quantified by Optical Properties in Epitaxial Fe2CrO4+d Films on (001) MgAl2O4

We report on the structural and optical properties of Fe2CrO4+d epitaxial films grown by molecular beam epitaxy on MgAl2O4 (001) as a function of ?. The average Fe valence can be correlated with the out-of-plane lattice parameter and the extent of light absorption in the infrared spectral region. Over-oxidized films (0 < d < 0.5) exhibit reduced lattice parameters and suppressed infrared absorption. We discuss the behavior of a novel infrared transition at ~0.6 eV in stoichiometric Fe2CrO4 films deposited on MgAl2O4 (MAO) at or above 400 °C. This research provides new insight into the atomic structure, optical processes, oxidation states, electronic structure, and application potentials of Fe2CrO4+d.

ellipsometry, Epitaxy, thin film, oxidation, reduc↗
DOE OSTI2011

Growth and properties of heavy fermion CeCu{sub 2}Ge{sub 2} and CeFe{sub 2}Ge{sub 2} thin films

Epitaxial films of heavy fermion CeCu{sub 2}Ge{sub 2} and CeFe{sub 2}Ge{sub 2} are grown on DyScO{sub 3} and MgO substrates using molecular beam epitaxy. The growth begins via island nucleation leading to a granular morphology. The grains grow flat with c-axis orientation after nucleating, as indicated by in-situ reflection high energy electron diffraction (RHEED) and ex-situ analysis including atomic force microscopy (AFM) and x-ray diffraction (XRD). These single phase films show similar temperature dependent transport to single crystals of the materials indicating that similar collective order occurs in the films as in single crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Surfactant assisted growth of MgO films on GaN

Thin epitaxial films of <111> oriented MgO on [0001]-oriented GaN were grown by molecular beam epitaxy and pulsed laser deposition using the assistance of a vapor phase surfactant. In both cases, surfactant incorporation enabled layer-by-layer growth and a smooth terminal surface by stabilizing the {l_brace}111{r_brace} rocksalt facet. Metal-insulator-semiconductor capacitor structures were fabricated on n-type GaN. A comparison of leakage current density for conventional and surfactant-assisted growth reveals a nearly 100 Multiplication-Sign reduction in leakage current density for the surfactant-assisted samples. These data verify numerous predictions regarding the role of H-termination in regulating the habit of rocksalt crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Tungsten oxide proton conducting films for low-voltage transparent oxide-based thin-film transistors

Tungsten oxide (WO{sub x}) electrolyte films deposited by reactive magnetron sputtering showed a high room temperature proton conductivity of 1.38 Multiplication-Sign 10{sup -4} S/cm with a relative humidity of 60%. Low-voltage transparent W-doped indium-zinc-oxide thin-film transistors gated by WO{sub x}-based electrolytes were self-assembled on glass substrates by one mask diffraction method. Enhancement mode operation with a large current on/off ratio of 4.7 Multiplication-Sign 10{sup 6}, a low subthreshold swing of 108 mV/decade, and a high field-effect mobility 42.6 cm{sup 2}/V s was realized. Our results demonstrated that WO{sub x}-based proton conducting films were promising gate dielectric candidates for portable low-voltage oxide-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Thermal conductivity of Er{sup +3}:Y{sub 2}O{sub 3} films grown by atomic layer deposition

Cross-plane thermal conductivity of 800, 458, and 110 nm erbium-doped crystalline yttria (Er{sup +3}:Y{sub 2}O{sub 3}) films deposited via atomic layer deposition was measured using the 3ω method at room temperature. Thermal conductivity results show 16-fold increase in thermal conductivity from 0.49 W m{sup −1}K{sup −1} to 8 W m{sup −1}K{sup −1} upon post deposition annealing, partially due to the suppression of the number of the -OH/H{sub 2}O bonds in the films after annealing. Thermal conductivity of the annealed film was ∼70% lower than undoped bulk single crystal yttria. The cumulative interface thermal resistivity of substrate-Er{sup +3}:Y{sub 2}O{sub 3}-metal heater was determined to be ∼2.5 × 10{sup −8} m{sup 2} K/W.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Defects in paramagnetic Co-doped ZnO films studied by transmission electron microscopy

We study planar defects in epitaxial Co:ZnO dilute magnetic semiconductor thin films deposited on c-plane sapphire (Al{sub 2}O{sub 3}), as well as the Co:ZnO/Al{sub 2}O{sub 3} interface, using aberration-corrected transmission electron microscopy and electron energy-loss spectroscopy. Co:ZnO samples that were deposited using pulsed laser deposition and reactive magnetron sputtering are both found to contain extrinsic stacking faults, incoherent interface structures, and compositional variations within the first 3–4 Co:ZnO layers next to the Al{sub 2}O{sub 3} substrate. The stacking fault density is in the range of 10{sup 17} cm{sup −3}. We also measure the local lattice distortions around the stacking faults. It is shown that despite the relatively high density of planar defects, lattice distortions, and small compositional variation, the Co:ZnO films retain paramagnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2014

p-type doping of MoS{sub 2} thin films using Nb

We report on the first demonstration of p-type doping in large area few-layer films of (0001)-oriented chemical vapor deposited MoS{sub 2}. Niobium was found to act as an efficient acceptor up to relatively high density in MoS{sub 2} films. For a hole density of 3.1 × 10{sup 20} cm{sup −3}, Hall mobility of 8.5 cm{sup 2} V{sup −1} s{sup −1} was determined, which matches well with the theoretically expected values. X-ray diffraction scans and Raman characterization indicated that the film had good out-of-plane crystalline quality. Absorption measurements showed that the doped sample had similar characteristics to high-quality undoped samples, with a clear absorption edge at 1.8 eV. Scanning transmission electron microscope imaging showed ordered crystalline nature of the Nb-doped MoS{sub 2} layers stacked in the [0001] direction. This demonstration of substitutional p-doping in large area epitaxial MoS{sub 2} could help in realizing a wide variety of electrical and opto-electronic devices based on layered metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Amorphous indium-tin-zinc oxide films deposited by magnetron sputtering with various reactive gases: Spatial distribution of thin film transistor performance

This work presents the spatial distribution of electrical characteristics of amorphous indium-tin-zinc oxide film (a-ITZO), and how they depend on the magnetron sputtering conditions using O{sub 2}, H{sub 2}O, and N{sub 2}O as the reactive gases. Experimental results show that the electrical properties of the N{sub 2}O incorporated a-ITZO film has a weak dependence on the deposition location, which cannot be explained by the bombardment effect of high energy particles, and may be attributed to the difference in the spatial distribution of both the amount and the activity of the reactive gas reaching the substrate surface. The measurement for the performance of a-ITZO thin film transistor (TFT) also suggests that the electrical performance and device uniformity of a-ITZO TFTs can be improved significantly by the N{sub 2}O introduction into the deposition process, where the field mobility reach to 30.8 cm{sup 2} V{sup –1} s{sup –1}, which is approximately two times higher than that of the amorphous indium-gallium-zinc oxide TFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Room temperature optical anisotropy of a LaMnO 3 thin-film induced by ultra-short pulse laser

Ultra-short laser pulse induced optical anisotropy of LaMnO 3 thin films grown on SrTiO 3 substrates were observed by irradiation with a femto-second laser pulse with the fluence of less than 0.1 mJ/cm 2 at room temperature. The transmittance and reflectance showed different intensities for different polarization states of the probe pulse after pump pulse irradiation. The theoretical optical transmittance and re ectance that assumed an orbital ordering of the 3d eg electrons in Mn 3+ ions resulted in an anisotropic time dependent changes similar to those obtained from the experimental results, suggesting that the photo-induced optical anisotropy of LaMnO 3 is a result of photo-induced symmetry breaking of the orbital ordering for an optically excited state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗