Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Event capturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Non-Parametric Statistical Analysis of Current Waveforms through Power System Sensors

The protection, control, and monitoring of the power grid is not possible without accurate measurement devices. As the percentage of renewable energy sources penetrating the existing grid infrastructure increases, so do uncertainties surrounding their effects on the everyday operation of the power system. Many of these devices are sources of high-frequency transients. These transients may be useful for identifying certain events or behaviors otherwise not seen in traditional analysis techniques. Therefore, the ability of sensors to accurately capture these phenomena is paramount. In this work, two commercial-grade power system distribution sensors are investigated in terms of their ability to replicate high-frequency phenomena by studying their responses to three events: a current inrush, a microgrid “close-in”, and a fault on the terminals of a wind turbine. Kernel density estimation is used to derive the non-parametric probability density functions of these error distributions and their adequateness is quantified utilizing the commonly used root mean square error (RMSE) metric. It is demonstrated that both sensors exhibit characteristics in the high harmonic range that go against the assumption that measurement error is normally distributed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

The Extraordinary March 2022 East Antarctica “Heat” Wave. Part I: Observations and Meteorological Drivers

Abstract Between 15 and 19 March 2022, East Antarctica experienced an exceptional heat wave with widespread 30°–40°C temperature anomalies across the ice sheet. This record-shattering event saw numerous monthly temperature records being broken including a new all-time temperature record of −9.4°C on 18 March at Concordia Station despite March typically being a transition month to the Antarctic coreless winter. The driver for these temperature extremes was an intense atmospheric river advecting subtropical/midlatitude heat and moisture deep into the Antarctic interior. The scope of the temperature records spurred a large, diverse collaborative effort to study the heat wave’s meteorological drivers, impacts, and historical climate context. Here we focus on describing those temperature records along with the intricate meteorological drivers that led to the most intense atmospheric river observed over East Antarctica. These efforts describe the Rossby wave activity forced from intense tropical convection over the Indian Ocean. This led to an atmospheric river and warm conveyor belt intensification near the coastline, which reinforced atmospheric blocking deep into East Antarctica. The resulting moisture flux and upper-level warm-air advection eroded the typical surface temperature inversions over the ice sheet. At the peak of the heat wave, an area of 3.3 million km 2 in East Antarctica exceeded previous March monthly temperature records. Despite a temperature anomaly return time of about 100 years, a closer recurrence of such an event is possible under future climate projections. In Part II we describe the various impacts this extreme event had on the East Antarctic cryosphere. Significance Statement In March 2022, a heat wave and atmospheric river caused some of the highest temperature anomalies ever observed globally and captured the attention of the Antarctic science community. Using our diverse collective expertise, we explored the causes of the event and have placed it within a historical climate context. One key takeaway is that Antarctic climate extremes are highly sensitive to perturbations in the midlatitudes and subtropics. This heat wave redefined our expectations of the Antarctic climate. Despite the rare chance of occurrence based on past climate, a future temperature extreme event of similar magnitude is possible, especially given anthropogenic climate change.

Wille, Jonathan D.↗
NASA NTRS1984

A formulation and analysis of combat games

Combat which is formulated as a dynamical encounter between two opponents, each of whom has offensive capabilities and objectives is outlined. A target set is associated with each opponent in the event space in which he endeavors to terminate the combat, thereby winning. If the combat terminates in both target sets simultaneously, or in neither, a joint capture or a draw, respectively, occurs. Resolution of the encounter is formulated as a combat game; as a pair of competing event constrained differential games. If exactly one of the players can win, the optimal strategies are determined from a resulting constrained zero sum differential game. Otherwise the optimal strategies are computed from a resulting nonzero sum game. Since optimal combat strategies may frequently not exist, approximate or delta combat games are also formulated leading to approximate or delta optimal strategies. The turret game is used to illustrate combat games. This game is sufficiently complex to exhibit a rich variety of combat behavior, much of which is not found in pursuit evasion games.

Heymann, M.↗
NASA NTRS2003

A Survey of Logic Formalisms to Support Mishap Analysis

Mishap investigations provide important information about adverse events and near miss incidents. They are intended to help avoid any recurrence of previous failures. Over time, they can also yield statistical information about incident frequencies that helps to detect patterns of failure and can validate risk assessments. However, the increasing complexity of many safety critical systems is posing new challenges for mishap analysis. Similarly, the recognition that many failures have complex, systemic causes has helped to widen the scope of many mishap investigations. These two factors have combined to pose new challenges for the analysis of adverse events. A new generation of formal and semi-formal techniques have been proposed to help investigators address these problems. We introduce the term mishap logics to collectively describe these notations that might be applied to support the analysis of mishaps. The proponents of these notations have argued that they can be used to formally prove that certain events created the necessary and sufficient causes for a mishap to occur. These proofs can be used to reduce the bias that is often perceived to effect the interpretation of adverse events. Others have argued that one cannot use logic formalisms to prove causes in the same way that one might prove propositions or theorems. Such mechanisms cannot accurately capture the wealth of inductive, deductive and statistical forms of inference that investigators must use in their analysis of adverse events. This paper provides an overview of these mishap logics. It also identifies several additional classes of logic that might also be used to support mishap analysis.

Johnson, Chris↗
DOE OSTI2022

Singularities in the gravitational capture of dark matter through long-range interactions

Here, we re-examine the gravitational capture of dark matter (DM) through long-range interactions. We demonstrate that neglecting the thermal motion of target particles, which is often a good approximation for short-range capture, results in parametrically inaccurate results for long-range capture. When the particle mediating the scattering process has a mass that is small in comparison to the momentum transfer in scattering events, correctly incorporating the thermal motion of target particles results in a quadratic, rather than logarithmic, sensitivity to the mediator mass, which substantially enhances the capture rate. We quantitatively assess the impact of this finite temperature effect on the captured DM population in the Sun as a function of mediator mass. We find that capture of DM through light dark photons, as in e.g. mirror DM, can be powerfully enhanced, with self-capture attaining a geometric limit over much of parameter space. For visibly-decaying dark photons, thermal corrections are not large in the Sun, but may be important in understanding long-range DM capture in more massive bodies such as Population III stars. We additionally provide the first calculation of the long-range DM self-evaporation rate.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2013

Coronal Fine Structure in Dynamic Events Observed by Hi-C

The High-Resolution Coronal Imager (Hi-C) flew aboard a NASA sounding rocket on 2012 July 11 and captured roughly 345 s of high spatial and temporal resolution images of the solar corona in a narrowband 193 Angstrom channel. We have analyzed the fluctuations in intensity of Active Region 11520. We selected events based on a lifetime greater than 11 s (two Hi-C frames) and intensities greater than a threshold determined from the photon and readout noise. We compare the Hi-C events with those determined from AIA. We find that HI-C detects shorter and smaller events than AIA. We also find that the intensity increase in the Hi-C events is approx. 3 times greater than the intensity increase in the AIA events we conclude the events are related to linear sub-structure that is unresolved by AIA

Winebarger, Amy↗
DOE OSTI2026

Electrochemo-mechanics unlocks hidden dynamics of lithium plating under stacking pressure

Understanding and mitigating lithium plating remains one of the most pressing challenges in advancing the safety and longevity of lithium-ion batteries (LIBs). Here, we present a novel integrative framework that combines in-operando swelling force measurements with a physics-based electro-chemo-mechanical model to uncover previously inaccessible insights into lithium plating dynamics under mechanical constraints. Unlike existing approaches that focus primarily on electrochemical signatures, our approach captures the coupled mechanical responses of commercial pouch cells during cycling, revealing how mechanical constraints fundamentally alter degradation pathways. We demonstrate that the use of a moderate stacking pressure suppresses lithium plating and enhances lithium stripping. This mechanically driven structural effect, coupled with the electrochemical process, significantly extends the linear aging regime in LIBs. Intriguingly, intermittent capacity recovery events that were observed during the battery cycling suggest dynamic lithium reactivation, a phenomenon rarely captured in real-time. This study pioneers a stress-aware methodology for diagnosing and managing lithium plating, establishing a new paradigm for real-time battery health monitoring. The findings offer transformative implications for the design of durable, high-performance LIB systems, opening new avenues for intelligent control strategies in battery management systems.

Bhowmick, Amit↗
DOE OSTI2024

Neuromorphic intermediate representation: A unified instruction set for interoperable brain-inspired computing

Abstract Spiking neural networks and neuromorphic hardware platforms that simulate neuronal dynamics are getting wide attention and are being applied to many relevant problems using Machine Learning. Despite a well-established mathematical foundation for neural dynamics, there exists numerous software and hardware solutions and stacks whose variability makes it difficult to reproduce findings. Here, we establish a common reference frame for computations in digital neuromorphic systems, titled Neuromorphic Intermediate Representation (NIR). NIR defines a set of computational and composable model primitives as hybrid systems combining continuous-time dynamics and discrete events. By abstracting away assumptions around discretization and hardware constraints, NIR faithfully captures the computational model, while bridging differences between the evaluated implementation and the underlying mathematical formalism. NIR supports an unprecedented number of neuromorphic systems, which we demonstrate by reproducing three spiking neural network models of different complexity across 7 neuromorphic simulators and 4 digital hardware platforms. NIR decouples the development of neuromorphic hardware and software, enabling interoperability between platforms and improving accessibility to multiple neuromorphic technologies. We believe that NIR is a key next step in brain-inspired hardware-software co-evolution, enabling research towards the implementation of energy efficient computational principles of nervous systems. NIR is available atneuroir.org

Science & Technology - Other Topics↗
DOE OSTI2023

A Unified Metric for Fast Frequency Response in Low-Inertia Power Systems

Future power systems with more inverter-based resources (IBRs), will be vulnerable to frequency decline contingencies. Fast frequency response (FFR) provided by IBRs is a good candidate to arrest frequency excursions. Diverse types of FFR have been proposed, and some have been deployed in our power systems. Without a unified quantification of FFR, it is hard for the grid operators to compare and fully leverage the FFR capabilities of IBRs. This work introduces a potential unified metric that quantifies two key characteristics of FFR and describes its application to three prevailing FFR types. We then use metric-to-frequency mapping to validate the accuracy of the metric in predicting the impact of a given FFR on the trajectory of a frequency event. The results show that the proposed metric is simple yet accurately captures the ability of diverse forms of FFR to improve system frequency dynamics.

effective inertia↗
DOE OSTI2021

Evaluation of residual gas fraction estimation methods for cycle-to-cycle combustion variability analysis and modeling

Cycle-to-cycle combustion variability in spark-ignition engines during normal operation is mainly caused by random perturbations of the in-cylinder conditions such as the flow velocity field, homogeneity of the air-fuel distribution, spark energy discharge, and turbulence intensity of the flame front. Such perturbations translate into the variability of the energy released observed at the end of the combustion process. During normal operating conditions, the cycle-to-cycle variability (CCV) of the energy release behaves as random uncorrelated noise. However, during diluted combustion, in either the form of exhaust gas recirculation (EGR) or excess air (lean operation), the CCV tends to increase as dilution increases. Moreover, when the ignition limit is reached at high dilution levels, the combustion CCV is exacerbated by sporadic occurrences of incomplete combustion events, and the uncorrelation assumption no longer holds. The low or null energy released by partial burns and misfires has an impact on the following combustion event due to the residual gas that carries burned and unburned gases, which contributes to the deterministic coupling between engine cycles. Many residual gas fraction estimation methods, however, only address the nominal case where complete combustion occurs and combustion events are uncorrelated. Here we evaluate the efficacy of such methods on capturing the effects of partial burns and misfires on the residual gas estimate for high-EGR operation. The advantages and disadvantages of each method are discussed based on their ability to generate cycle-to-cycle estimates. Finally, a comparison between the different estimation techniques is presented based on their usefulness for control-oriented modeling.

42 ENGINEERING↗
DOE OSTI2024

Effects of fire and fire-induced changes in soil properties on post-burn soil respiration

Boreal forests cover vast areas of land in the northern hemisphere and store large amounts of carbon (C) both aboveground and belowground. Wildfires, which are a primary ecosystem disturbance of boreal forests, affect soil C via combustion and transformation of organic matter during the fire itself and via changes in plant growth and microbial activity post-fire. Wildfire regimes in many areas of the boreal forests of North America are shifting towards more frequent and severe fires driven by changing climate. As wildfire regimes shift and the effects of fire on belowground microbial community composition are becoming clearer, there is a need to link fire-induced changes in soil properties to changes in microbial functions, such as respiration, in order to better predict the impact of future fires on C cycling. We used laboratory burns to simulate boreal crown fires on both organic-rich and sandy soil cores collected from Wood Buffalo National Park, Alberta, Canada, to measure the effects of burning on soil properties including pH, total C, and total nitrogen (N). We used 70-day soil incubations and two-pool exponential decay models to characterize the impacts of burning and its resulting changes in soil properties on soil respiration. Laboratory burns successfully captured a range of soil temperatures that were realistic for natural wildfire events. We found that burning increased pH and caused small decreases in C:N in organic soil. Overall, respiration per gram total (post-burn) C in burned soil cores was 16% lower than in corresponding unburned control cores, indicating that soil C lost during a burn may be partially offset by burn-induced decreases in respiration rates. Simultaneously, burning altered how remaining C cycled, causing an increase in the proportion of C represented in the modeled slow-cycling vs. fast-cycling C pool as well as an increase in fast-cycling C decomposition rates. Together, our findings imply that C storage in boreal forests following wildfires will be driven by the combination of C losses during the fire itself as well as fire-induced changes to the soil C pool that modulate post-fire respiration rates. Moving forward, we will pair these results with soil microbial community data to understand how fire-induced changes in microbial community composition may influence respiration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Impact of fire on chemical properties and respiration of boreal forest soils

We collected both organic-rich and sandy soil cores from 12 sites (site_location_and_texture.csv) within Wood Buffalo National Park, Alberta, Canada. Laboratory burns were conducted by exposing intact soil cores to 60 kW m^-2 in a mass loss calorimeter to simulate boreal forest crown fires in order to measure the effects of burning (temp_data.csv) on soil properties including pH, total C, and total nitrogen (N) (metadata.csv). We used 70-day soil incubations and two-pool exponential decay models to characterize the impacts of burning and burn-induced changes in soil properties on soil respiration (soil_moisture_at_end_of_incubation.csv; soil_mass_at_end_of_incubation.csv; respiration_data.csv). Laboratory burns successfully captured a range of soil temperatures that were realistic for natural wildfire events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Crush Gun Impact of Lightly Confined Explosive with Rounded Projectiles at Nominal Velocity 35 m/s

Blunt, crushing impact of high explosives can cause internal shear heating sufficient to ignite a deflagration. Low-velocity impact of this sort is plausible in handling accident scenarios, e.g. if a charge is dropped or an object is dropped onto a charge. This mechanism can also be activated during sub-shock fragment impact. Efforts to model this viscous shear heating mechanism are currently being developed and refined. The Crush Gun apparatus was created to provide a controlled low-velocity impact stimuli to explosive samples. Infrared thermography captures temporal- and spatially-resolved heating that occurs during the impact event.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS2013

A Mars Sample Return Sample Handling System

We present a sample handling system, a subsystem of the proposed Dragon landed Mars Sample Return (MSR) mission [1], that can return to Earth orbit a significant mass of frozen Mars samples potentially consisting of: rock cores, subsurface drilled rock and ice cuttings, pebble sized rocks, and soil scoops. The sample collection, storage, retrieval and packaging assumptions and concepts in this study are applicable for the NASA's MPPG MSR mission architecture options [2]. Our study assumes a predecessor rover mission collects samples for return to Earth to address questions on: past life, climate change, water history, age dating, understanding Mars interior evolution [3], and, human safety and in-situ resource utilization. Hence the rover will have "integrated priorities for rock sampling" [3] that cover collection of subaqueous or hydrothermal sediments, low-temperature fluidaltered rocks, unaltered igneous rocks, regolith and atmosphere samples. Samples could include: drilled rock cores, alluvial and fluvial deposits, subsurface ice and soils, clays, sulfates, salts including perchlorates, aeolian deposits, and concretions. Thus samples will have a broad range of bulk densities, and require for Earth based analysis where practical: in-situ characterization, management of degradation such as perchlorate deliquescence and volatile release, and contamination management. We propose to adopt a sample container with a set of cups each with a sample from a specific location. We considered two sample cups sizes: (1) a small cup sized for samples matching those submitted to in-situ characterization instruments, and, (2) a larger cup for 100 mm rock cores [4] and pebble sized rocks, thus providing diverse samples and optimizing the MSR sample mass payload fraction for a given payload volume. We minimize sample degradation by keeping them frozen in the MSR payload sample canister using Peltier chip cooling. The cups are sealed by interference fitted heat activated memory alloy caps [5] if the heating does not affect the sample, or by crimping caps similar to bottle capping. We prefer cap sealing surfaces be external to the cup rim to prevent sample dust inside the cups interfering with sealing, or, contamination of the sample by Teflon seal elements (if adopted). Finally the sample collection rover, or a Fetch rover, selects cups with best choice samples and loads them into a sample tray, before delivering it to the Earth Return Vehicle (ERV) in the MSR Dragon capsule as described in [1] (Fig 1). This ensures best use of the MSR payload mass allowance. A 3 meter long jointed robot arm is extended from the Dragon capsule's crew hatch, retrieves the sample tray and inserts it into the sample canister payload located on the ERV stage. The robot arm has capacity to obtain grab samples in the event of a rover failure. The sample canister has a robot arm capture casting to enable capture by crewed or robot spacecraft when it returns to Earth orbit

Wilson, David↗
NASA NTRS2013

Daily MODIS 500 m Reflectance Anisotropy Direct Broadcast (DB) Products for Monitoring Vegetation Phenology Dynamics

Land surface vegetation phenology is an efficient bio-indicator for monitoring ecosystem variation in response to changes in climatic factors. The primary objective of the current article is to examine the utility of the daily MODIS 500 m reflectance anisotropy direct broadcast (DB) product for monitoring the evolution of vegetation phenological trends over selected crop, orchard, and forest regions. Although numerous model-fitted satellite data have been widely used to assess the spatio-temporal distribution of land surface phenological patterns to understand phenological process and phenomena, current efforts to investigate the details of phenological trends, especially for natural phenological variations that occur on short time scales, are less well served by remote sensing challenges and lack of anisotropy correction in satellite data sources. The daily MODIS 500 m reflectance anisotropy product is employed to retrieve daily vegetation indices (VI) of a 1 year period for an almond orchard in California and for a winter wheat field in northeast China, as well as a 2 year period for a deciduous forest region in New Hampshire, USA. Compared with the ground records from these regions, the VI trajectories derived from the cloud-free and atmospherically corrected MODIS Nadir BRDF (bidirectional reflectance distribution function) adjusted reflectance (NBAR) capture not only the detailed footprint and principal attributes of the phenological events (such as flowering and blooming) but also the substantial inter-annual variability. This study demonstrates the utility of the daily 500 m MODIS reflectance anisotropy DB product to provide daily VI for monitoring and detecting changes of the natural vegetation phenology as exemplified by study regions comprising winter wheat, almond trees, and deciduous forest.

Vegetation↗
NASA NTRS2023

Importance of Internal Variability for Climate Model Assessment

Benchmarking climate model simulations against observations of the climate is core to the process of building realistic climate models and developing accurate future projections. However, in many cases, models do not match historical observations, particularly on regional scales. If there is a mismatch between modeled and observed climate features, should we necessarily conclude that our models are deficient? Using several illustrative examples, we emphasize that internal variability can easily lead to marked differences between the basic features of the model and observed climate, even when decades of model and observed data are available. This can appear as an apparent failure of models to capture regional trends or changes in global teleconnections, or simulation of extreme events. Despite a large body of literature on the impact of internal variability on climate, this acknowledgment has not yet penetrated many model evaluation activities, particularly for regional climate. We emphasize that using a single or small ensemble of simulations to conclude that a climate model is in error can lead to premature conclusions on model fidelity. A large ensemble of multidecadal simulations is therefore needed to properly sample internal climate variability in order to robustly identify model deficiencies and convincingly demonstrate progress between generations of climate models.

Climate and Earth system modelling↗
NASA NTRSDate not supplied

Importance of Radiative Transfer Models in Atmospheric Remote Sensing

Radiative transfer models (RTMs) play a significant role in the development of satellite instruments for remote sensing applications. These models simulate electromagnetic radiation's propagation through the atmosphere, providing valuable insights into atmosphere-radiation interactions. RTMs facilitate the optimization of satellite instrument designs, ensuring their ability to measure targeted atmospheric and surface properties accurately. Moreover, they aid in simulating instrument’s measurements under various atmospheric conditions, enabling calibration and validation processes to enhance data quality and reliability. RTMs are extensively used in the Observing System Simulation Experiments (OSSE), to generate synthetic observations. By incorporating RTMs into OSSE, we can assess the potential impact of future satellite missions, sensor configurations, and data assimilation techniques. This approach allows for the optimization of satellite instruments and constellations and the evaluation of their influence on weather forecasting, climate monitoring, and other Earth science applications. Another crucial application area of RT models is data assimilation, where they play a fundamental role in combining satellite observations with numerical models to improve atmospheric and environmental predictions. RTMs provide the link between observed radiances and atmospheric parameters, enhancing the accuracy of numerical models and generating more reliable forecasts for weather events, air quality assessments, and climate projections. Moreover, adapting RT models to capture the intricate radiation interactions within the Planetary Boundary Layer will significantly contribute to improving weather forecasting and climate change projections. Current community radiative transfer (RT) models are primarily developed and optimized for operational data assimilation of satellite observations. These models excel at assimilating satellite data into numerical weather prediction models to improve forecast accuracy. However, their focus on data assimilation limits their suitability for other important applications, such as satellite instrument development, OSSE, and Planetary Boundary Layer (PBL) studies. Moreover, for PBL studies, RT models need to be adapted to capture the intricate radiation interactions within this crucial atmospheric layer. Developing RT models that can represent the PBL's unique characteristics, such as surface interactions, will contribute significantly to understanding and predicting weather phenomena, air quality, and climate dynamics. This abstract provides a comprehensive overview of the current status of RT models and highlights their limitations concerning satellite instrument development, OSSE, and PBL studies. Addressing these shortcomings requires concerted efforts to enhance RT models' capabilities and expand their applications beyond data assimilation. By investing in research and development to improve these

Isaac Moradi↗
DOE OSTI2021

Overview of NNSS Capabilities

This presentation is required for the DHS CWMD T&E week event. Submission to DHS is July 21. Material in this presentation was captured from publicly released information such as NNSS external website, Fact sheets, SDRD annual report.

99 GENERAL AND MISCELLANEOUS↗