Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Physical and optical properties of room temperature microwave plasma anodically grown TiO{sub 2}

A dense, amorphous form of TiO{sub 2} produced by plasma assisted anodic oxidation of Ti was identified using infrared absorption, x-ray diffraction, x-ray reflectivity, atomic force microscopy, and ellipsometry. The films were grown by nominally room temperature processing. Comparison of the physical properties of the material is made with respect to existing data on plasma enhanced chemical vapor deposited TiO{sub 2} and new data obtained on electron beam evaporated TiO{sub 2}. Anodic TiO{sub 2} is found to be amorphous with a refractive index of the order of 2.33 as compared to 2.2 for plasma enhanced chemical vapor deposited films and 1.89 for electron beam evaporated TiO{sub 2} films. The density is measured to be 4.1 g/cm{sup 3}. Samples annealed up to 600 degree sign C in a N{sub 2} atmosphere for 1 h remained amorphous, the refractive index increasing to 2.38 and the density to 4.25 g/cm{sup 3}. The surface roughness remained almost unchanged consistent with the amorphicity. No evidence for the presence of crystalline rutile or anatase phases was detected. Furthermore, unlike plasma assisted chemical vapor deposited and electron beam evaporated TiO{sub 2} films, annealed anodic TiO{sub 2} showed no observable interaction with the Si substrate either during growth or following annealing.

36 MATERIALS SCIENCE↗

Influence of annealing and Ag doping on structural and optical properties of indium tin oxide thin films

Indium tin oxide (ITO) and Ag (1.2{+-}0.1 at. %)-ITO films with the thickness of 130 nm were deposited on glass substrates at room temperature by dc magnetron sputtering and postannealed at the temperature range of 200-400 deg. C. By calculating the x-ray diffraction data, the lattice constants of all samples were obtained and the results show that the annealing led to the smaller lattice constants and the Ag doping resulted in the further lattice distortion. The refractive index n and extinction coefficient k of all samples were extracted from the transmittance spectra by means of the spectroscopic ellipsometry optimization method. Ag-ITO film annealed at 400 deg. C has the high transmittance of 80%-90% in the visible wavelength range. Ag doping dramatically increased the extinction coefficient k of ITO films in UV wavelength range but almost without change in it in visible band. Meanwhile, by contrast with ITO films, Ag-ITO films show much higher n values than that of ITO films. Finally, the optical band gaps of all samples were determined, and it has been found that there is almost no difference of band gaps between ITO and Ag-ITO films. The reasons of the influence of annealing and Ag doping on structural and optical properties of ITO thin films are discussed.

36 MATERIALS SCIENCE↗

Self-bias voltage diagnostics for the amorphous-to-microcrystalline transition in a-Si:H under a hydrogen-plasma treatment

The authors demonstrate the possibility of using self-bias voltage on the radio-frequency electrode of a capacitively coupled deposition system as a diagnostic tool to detect the amorphous-to-microcrystalline silicon transition during the exposure of a-Si:H thin films to a hydrogen plasma. This is achieved by combining self-bias voltage (V{sub dc}) and kinetic-ellipsometry measurements, which provide real-time information on the film properties. On intrinsic and n-type a-Si:H films, the hydrogen-plasma exposure results in the formation of a hydrogen-modified layer, which is accompanied with a decrease in the absolute values of V{sub dc}, until a plateau corresponding to the nucleation and the growth of the microcrystalline layer occurs. On p-type a-Si:H, the amorphous-to-microcrystalline transition is characterized by a rapid increase in the absolute values of V{sub dc}. This particular trend is ascribed to the effects of boron on both the solid and plasma phases.

36 MATERIALS SCIENCE↗

Influence of temperature on the hydrogenated amorphous carbon films prepared by plasma-enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were deposited in a plasma-enhanced chemical vapor deposition (PECVD) system. The substrate temperature at deposition was found to have significant effects on the film stoichiometry, sp{sup 2} phase, and optical properties. Raman spectroscopy reveals an increase in sp{sup 2}-bonded carbon and a continual structure ordering of the sp{sup 2} phase with increasing substrate temperature at deposition. Thermal desorption spectroscopy analysis revealed that the onset temperature of CH{sub 4} effusion of PECVD a-C:H films increase with increasing substrate temperatures, implicating enhanced structural stability via elevating the substrate temperature at deposition. The extinction coefficient k measured from spectroscopic ellipsometry gradually increases with increasing substrate temperature at deposition, due possibly to the graphitization effect which decreases the optical gap resulting in higher k.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and electrical characterization of HBr/O{sub 2} plasma damage to Si substrate

Silicon substrate damage caused by HBr/O{sub 2} plasma exposure was investigated by spectroscopic ellipsometry (SE), high-resolution Rutherford backscattering spectroscopy, and transmission electron microscopy. The damage caused by H{sub 2}, Ar, and O{sub 2} plasma exposure was also compared to clarify the ion-species dependence. Although the damage basically consists of a surface oxidized layer and underlying dislocated Si, the damage structure strongly depends on the incident ion species, ion energy, and oxidation during air and plasma exposure. In the case of HBr/O{sub 2} plasma exposure, hydrogen generated the deep damaged layer ({approx}10 nm), whereas ion-enhanced diffusion of oxygen, supplied simultaneously by the plasma, caused the thick surface oxidation. In-line monitoring of damage thicknesses by SE, developed with an optimized optical model, showed that the SE can be used to precisely monitor damage thicknesses in mass production. Capacitance-voltage (C-V) characteristics of a damaged layer were studied before and after diluted-HF (DHF) treatment. Results showed that a positive charge is generated at the surface oxide-dislocated Si interface and/or in the bulk oxide after plasma exposure. After DHF treatment, most of the positive charges were removed, while the thickness of the ''Si recess'' was increased by removing the thick surface oxidized layer. As both the Si recess and remaining dislocated Si, including positive charges, cause the degradation of electrical performance, precise monitoring of the surface structure and understanding its effect on device performance is indispensable for creating advanced devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical transparency and electrical conductivity of nonstoichiometric ultrathin In{sub x}O{sub y} films

The effect of thickness and composition on the electrical conductivity and optical transparency, mainly in the infrared, of ultrathin In{sub x}O{sub y} films was studied. In{sub x}O{sub y} films 35-470 A thick with oxygen atomic fractions of {approx}0.3 and {approx}0.5 were prepared via dc magnetron sputtering. All films were polycrystalline, consisting of only the cubic bixbiyte phase of In{sub 2}O{sub 3}. The average grain size of the films increased from 30 to 95 nm as the film thickness increased. The weak dependence of the electrical conductivity on the frequency and the low activation energies for conduction, a few hundredths of an eV, provided an indication that free band conduction was the primary electrical conduction mechanism in the case of all ultrathin In{sub x}O{sub y} films. It was found that introducing a high degree of nonstoichiometry in the form of oxygen deficiency did not help improve the electrical conductivity, since not all vacancies contributed two free electrons for conduction and due to impurity scattering. The optical nature of these films, studied mainly by ellipsometry, was found to be dependent on the film's composition and thickness. In the infrared, the dielectric function of all In{sub x}O{sub y} films was consistent with the Drude model, inferring that the transparency loss in this region was a result of free charge carriers. In the visible however, In{sub x}O{sub y} films under 170 A, which had an oxygen atomic fraction of {approx}0.5, were modeled by extending the Drude model to the shorter wavelengths. Films over 170 A, with the same composition, were modeled using the Cauchy dispersion model, meaning that no absorption was measured. These results indicate that, optically, under specific compositions, ultrathin In{sub x}O{sub y} films undergo a transition from metalliclike behavior to dielectric behavior with increasing film thickness. Using a figure of merit approach, it was determined that a nonstoichiometric 230 A thick In{sub x}O{sub y} film, with an oxygen atomic fraction of {approx}0.3, had the best combination of conductivity and transparency, namely, absorption of less than 20% in the infrared, about 10% in the visible, and electrical resistance of only 230 {Omega} at 20 kHz. Such a film may be classified as a highly conductive transparent oxide even in the infrared.

36 MATERIALS SCIENCE↗

Ultrathin TiSiN overcoat protection layer for magnetic media

TiSiN ultrathin films (10-50 A) deposited by reactive magnetron sputtering from Ti{sub x}Si{sub y} targets were used as anticorrosion overcoats to protect Co-containing recording media. Films' growth, structure, composition, resistance against hydrolysis, and anticorrosion performances were studied by spectroscopy (x-ray reflectivity and diffraction, ellipsometry, x-ray photoelectron spectroscopy, Fourier transform infrared reflection-absorption spectroscopy) and simulated by molecular dynamics (using modified Tersoff-type interatomic interactions). TiSiN ultrathin overcoats were found to be dense amorphous oxynitrides containing Ti-O-Si linkages. The conversion of SiN{sub x} into SiO{sub x} by hydrolysis was prevented by introducing less than 20 at. % of Ti in the films. Thanks to the formation of Ti-O-Si linkages which densify the films and reduce oxygen diffusion, good corrosion protection of the magnetic media was achieved down to 28 A TiSiN overcoat thickness.

36 MATERIALS SCIENCE↗

Effects of B{sub 18}H{sub x}{sup +} and B{sub 18}H{sub x} dimer ion implantations on crystallinity and retained B dose in silicon

The effects of B{sub 18}H{sub x}{sup +} and B{sub 18}H{sub x} dimer ion (B{sub 36}H{sub y}{sup +}) implantations on Si crystallinity and the retained B dose in Si were investigated using B{sub 18}H{sub x} bombardment and compared with the effects of B{sup +} implantation. Crystallinity was estimated for the implantation dose using molecular dynamic simulations (MDSs) and was quantified using the optical thickness obtained from spectroscopic ellipsometry. The authors focused on the crystallinity at a low B dose and compared the amorphized zones predicted by MDS for B{sub 18}H{sub x}{sup +} implantation with those measured using transmission electron microscopy; the predicted and measured results were in reasonable agreement. The authors then used their understanding of B{sub 18}H{sub x} bombardment to discuss the process for the generation of larger amorphized zones and thicker amorphized layers, as observed in B{sub 36}H{sub y}{sup +} implantation. The retained B dose and the sputtering were examined with secondary ion mass spectroscopy, focusing on a comparison of the retained B and the sputtering of Si and SiO{sub 2} surfaces. The retained B dose was lower for B{sub 18}H{sub x}{sup +} and B{sub 36}H{sub y}{sup +} implantations, with and without surface SiO{sub 2}, than for B{sup +} implantation, although no sputtering was observed. The reduction of the retained B dose was more severe in the samples with SiO{sub 2}. The origin of the differences between Si and SiO{sub 2} surfaces was considered to be Si melting; this was predicted by the MDSs, and observed indirectly as flat B profiles in the Si region. To examine the effects of both crystallinity and retained B dose on the electrical characteristics, the sheet resistance (R{sub S}) was measured. The R{sub S} for B{sub 18}H{sub x}{sup +} implantation was lower than that for B{sup +} implantation at both B doses studied. Additionally, the B{sub 36}H{sub y}{sup +} implantation under conditions that produced a thicker amorphized layer led to lower R{sub S} than B{sub 18}H{sub x}{sup +} implantation. These results indicate that both the amorphized layer and the amorphized zone contribute to the activation of more B atoms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plasma-enhanced and thermal atomic layer deposition of Al{sub 2}O{sub 3} using dimethylaluminum isopropoxide, [Al(CH{sub 3}){sub 2}({mu}-O{sup i}Pr)]{sub 2}, as an alternative aluminum precursor

The authors have been investigating the use of [Al(CH{sub 3}){sub 2}({mu}-O{sup i}Pr)]{sub 2} (DMAI) as an alternative Al precursor to [Al(CH{sub 3}){sub 3}] (TMA) for remote plasma-enhanced and thermal ALD over wide temperature ranges of 25-400 and 100-400 deg. C, respectively. The growth per cycle (GPC) obtained using in situ spectroscopic ellipsometry for plasma-enhanced ALD was 0.7-0.9 A/cycle, generally lower than the >0.9 A/cycle afforded by TMA. In contrast, the thermal process gave a higher GPC than TMA above 250 deg. C, but below this temperature, the GPC decreased rapidly with decreasing temperature. Quadrupole mass spectrometry data confirmed that both CH{sub 4} and HO{sup i}Pr were formed during the DMAI dose for both the plasma-enhanced and thermal processes. CH{sub 4} and HO{sup i}Pr were also formed during the H{sub 2}O dose but combustion-like products (CO{sub 2} and H{sub 2}O) were observed during the O{sub 2} plasma dose. Rutherford backscattering spectrometry showed that, for temperatures >100 deg. C and >200 deg. C for plasma-enhanced and thermal ALD, respectively, films from DMAI had an O/Al ratio of 1.5-1.6, a H content of {approx}5 at. % and mass densities of 2.7-3.0 g cm{sup -3}. The film compositions afforded from DMAI were comparable to those from TMA at deposition temperatures {>=}150 deg. C At lower temperatures, there were differences in O, H, and C incorporation. 30 nm thick Al{sub 2}O{sub 3} films from the plasma-enhanced ALD of DMAI were found to passivate n- and p-type Si floatzone wafers ({approx}3.5 and {approx}2 {Omega} cm, respectively) with effective carrier lifetimes comparable to those obtained using TMA. Surface recombination velocities of < 3 and < 6 cm s{sup -1} were obtained for the n- and p-type Si, respectively. Using these results, the film properties obtained using DMAI and TMA are compared and the mechanisms for the plasma-enhanced and thermal ALD using DMAI are discussed.

36 MATERIALS SCIENCE↗

Delta-doping of boron atoms by photoexcited chemical vapor deposition

Boron delta-doped structures in Si crystals were fabricated by means of photoexcited chemical vapor deposition (CVD). Core electronic excitation with high-energy photons ranging from vacuum ultraviolet to soft x rays decomposes B{sub 2}H{sub 6} molecules into fragments. Combined with in situ monitoring by spectroscopic ellipsometry, limited number of boron hydrides can be delivered onto a Si(100) surface by using the incubation period before the formation of a solid boron film. The boron-covered surface is subsequently embedded in a Si cap layer by Si{sub 2}H{sub 6} photo-excited CVD. The crystallinity of the Si cap layer depended on its thickness and the substrate temperature. The evaluation of the boron depth profile by secondary ion mass spectroscopy revealed that boron atoms were confined within the delta-doped layer at a concentration of 2.5 x 10{sup 20} cm{sup -3} with a full width at half maximum of less than 9 nm, while the epitaxial growth of a 130-nm-thick Si cap layer was sustained at 420 deg. C.

36 MATERIALS SCIENCE↗

Characterization of hydrogen-plasma interactions with photoresist, silicon, and silicon nitride surfaces

For the 45 nm technology node and beyond, a major challenge is to achieve reasonably high photoresist ash rates while minimizing the loss of the silicon (Si) substrate and its nitride (Si{sub 3}N{sub 4}). Accordingly, an objective of this work is to characterize the photoresist strip rate under varying conditions of H{sub 2} plasma and the effects of these conditions on Si and Si{sub 3}N{sub 4} etch rates. In addition, we discuss in detail the fundamental mechanisms of the reactions between H atoms and the above substrates and successfully reconcile the process trends obtained with the reaction mechanisms. In this work, photoresist, Si, and Si{sub 3}N{sub 4} films were exposed to downstream pure-H{sub 2} discharges and their removal rates were characterized by ellipsometry as a function of the following parameters: substrate temperature, reactor pressure, H{sub 2} flow rate, and source power. The authors found that the H{sub 2}-based dry ash and Si{sub 3}N{sub 4} etch are both thermally activated reactions, evidenced by the steady increase in etch rate as a function of temperature, with activation energies of {approx}5.0 and {approx}2.7 kcal/mol, respectively. The Si substrate exhibits a rather unique behavior where the etch rate increases initially to a maximum, which occurs at {approx}40 deg. C, and then decreases upon a further increase in temperature. The decrease in the Si etch rate at higher temperatures is attributed to the activation of competing side reactions that consume the chemisorbed H atoms on the Si surface, which then suppresses the Si-etch step. The photoresist and Si{sub 3}N{sub 4} removal rates increase initially with increasing pressure, reaching maxima at {approx}800 and 2000 mTorr, respectively, beyond which the removal rates drop with increasing pressure. The initial increase in removal rate at the low-pressure regime is attributed to the increased atomic-hydrogen density, whereas the decrease in ash rate at the high-pressure regime could be attributed to the recombination of H atoms that could occur by various mechanisms. At temperatures where the reaction rates are relatively fast, the photoresist and Si removal rates both increase continuously with the H{sub 2} flow rate, indicating that both reactions are in the supply-limited regime. For the range of process conditions explored here, we find that the etch rates of Si are generally much higher than those for Si{sub 3}N{sub 4} with Si:Si{sub 3}N{sub 4} etch-rate ratios that vary from 25 to >>520. Based on the process trends obtained here, we have identified a process window--high temperature and intermediate pressure--that attains relatively high photoresist ash rates and low Si and Si{sub 3}N{sub 4} etch rates.

36 MATERIALS SCIENCE↗

Atomic layer deposition of TiN for the fabrication of nanomechanical resonators

Films of titanium nitride were grown by atomic layer deposition (ALD) over a range of temperatures from 120 Degree-Sign C to 300 Degree-Sign C, and their deposition rates were characterized by ellipsometry and reflectometry. The stress state of the films was evaluated by interferometry using a wafer bowing technique and varied from compressive (-18 MPa) to tensile (650 MPa). The crystal structure of the films was assessed by x-ray diffraction. The grain size varied with temperature in the range of 2-9 nm. The chemical composition of the films was ascertained by high-resolution x-ray photoelectron spectroscopy and showed the presence of O, Cl, and C contaminants. A mildly tensile (250 MPa) stressed film was employed for the fabrication (by electron beam lithography and reactive ion etching) of doubly clamped nanoresonator beams. The resonance frequency of resonators was assayed using an interferometric resonance testing apparatus. The devices exhibited sharp mechanical resonance peaks in the 17-25 MHz range. The uniformity and controllable deposition rate of ALD films make them ideal candidate materials for the fabrication of ultranarrow (<50 nm) nanobeam structures.

36 MATERIALS SCIENCE↗

Physical properties of epitaxial ZrN/MgO(001) layers grown by reactive magnetron sputtering

Single-crystal ZrN films, 830 nm thick, are grown on MgO(001) at 450 °C by magnetically unbalanced reactive magnetron sputtering. The combination of high-resolution x-ray diffraction reciprocal lattice maps, high-resolution cross-sectional transmission electron microscopy, and selected-area electron diffraction shows that ZrN grows epitaxially on MgO(001) with a cube-on-cube orientational relationship, (001){sub ZrN}‖(001){sub MgO} and [100]{sub ZrN}‖[100]{sub MgO}. The layers are essentially fully relaxed with a lattice parameter of 0.4575 nm, in good agreement with reported results for bulk ZrN crystals. X-ray reflectivity results reveal that the films are completely dense with smooth surfaces (roughness = 1.3 nm, consistent with atomic-force microscopy analyses). Based on temperature-dependent electronic transport measurements, epitaxial ZrN/MgO(001) layers have a room-temperature resistivity ρ{sub 300K} of 12.0 μΩ-cm, a temperature coefficient of resistivity between 100 and 300 K of 5.6 × 10{sup −8}Ω-cm K{sup −1}, a residual resistivity ρ{sub o} below 30 K of 0.78 μΩ-cm (corresponding to a residual resistivity ratio ρ{sub 300Κ}/ρ{sub 15K} = 15), and the layers exhibit a superconducting transition temperature of 10.4 K. The relatively high residual resistivity ratio, combined with long in-plane and out-of-plane x-ray coherence lengths, ξ{sub ‖} = 18 nm and ξ{sub ⊥} = 161 nm, indicates high crystalline quality with low mosaicity. The reflectance of ZrN(001), as determined by variable-angle spectroscopic ellipsometry, decreases slowly from 95% at 1 eV to 90% at 2 eV with a reflectance edge at 3.04 eV. Interband transitions dominate the dielectric response above 2 eV. The ZrN(001) nanoindentation hardness and modulus are 22.7 ± 1.7 and 450 ± 25 GPa.

36 MATERIALS SCIENCE↗

Colored hard coatings with AlN–TiN multilayer structures

AlN–TiN multilayer structures can be used to extend the color gamut of hard coatings while maintaining good hardness and corrosion resistance. This study used reactive magnetron sputtering on a glass substrate to produce coatings with a microhardness of 19 GPa as well as optical reflectance exceeding 80% and controllable saturation (chroma) for various hues of red, yellow, green, blue, and purple. The authors characterized the complex index of refraction of the TiN films using ellipsometry; the real refractive indices of the AlN films were derived from the reflectance values obtained using photometry. Finally, the colors of the samples were quantified using CIE-1931 chromaticity coordinates in the L*a*b* color space, and the microhardness of the films was measured using a nanoindenter. Simulation results using a multiple-beam-interference recursive method presented good consistency with experimental measurements with regard to the optical reflective spectra of AlN–TiN multilayer thin film samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition of bismuth oxide using Bi(OCMe{sub 2}{sup i}Pr){sub 3} and H{sub 2}O

Bismuth oxide thin films were deposited by atomic layer deposition using Bi(OCMe{sub 2}{sup i}Pr){sub 3} and H{sub 2}O at deposition temperatures between 90 and 270 °C on Si{sub 3}N{sub 4}, TaN, and TiN substrates. Films were analyzed using spectroscopic ellipsometry, x-ray diffraction, x-ray reflectivity, high-resolution transmission electron microscopy, and Rutherford backscattering spectrometry. Bi{sub 2}O{sub 3} films deposited at 150 °C have a linear growth per cycle of 0.039 nm/cycle, density of 8.3 g/cm{sup 3}, band gap of approximately 2.9 eV, low carbon content, and show the β phase structure with a (201) preferred crystal orientation. Deposition temperatures above 210 °C and postdeposition anneals caused uneven volumetric expansion, resulting in a decrease in film density, increased interfacial roughness, and degraded optical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition of molybdenum oxide using bis(tert-butylimido)bis(dimethylamido) molybdenum

Molybdenum trioxide films have been deposited using thermal atomic layer deposition techniques with bis(tert-butylimido)bis(dimethylamido)molybdenum. Films were deposited at temperatures from 100 to 300 °C using ozone as the oxidant for the process. The Mo precursor was evaluated for thermal stability and volatility using thermogravimetric analysis and static vapor pressure measurements. Film properties were evaluated with ellipsometry, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and secondary electron microscopy. The growth rate per cycle was determined to extend from 0.3 to 2.4 Å/cycle with <4% nonuniformity (1-sigma) with-in-wafer across a 150 mm wafer for the investigated temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical bonding and defect states of LPCVD grown silicon-rich Si{sub 3}N{sub 4} for quantum dot applications

Si-rich Si{sub 3}N{sub 4} (SRN) thin films were investigated to understand the various defect states present within the SRN that can lead to reduced performance in quantum dot based devices made of these materials. The SRN films, deposited by low pressure chemical vapor deposition followed by furnace anneals over a range of temperatures, were determined to be comprised of two distinct phase separated SRN regions with different compositions (precipitates within a host matrix). Photoluminescence (PL) spectra showed multiple peaks convoluted together within the visible and near-visible range. Depending on deposition and annealing conditions, the films displayed changes in PL peak intensities which were correlated with chemical bonding utilizing x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, spectroscopic ellipsometry, and capacitance–voltage measurements. It is found that the PL originates from defect-state to defect-state and band edge to defect-state electronic transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of plasma-enhanced atomic layer deposition of Al{sub 2}O{sub 3} using dimethylaluminum isopropoxide

In this research, Al{sub 2}O{sub 3} films were grown by remote plasma-enhanced atomic layer deposition using a nonpyrophoric precursor, dimethylaluminum isopropoxide (DMAI), and oxygen plasma. After optimization, the growth rate was determined to be ∼1.5 Å/cycle within a growth window of 25–220 °C; the higher growth rate than reported for thermal atomic layer deposition was ascribed to the higher reactivity of the plasma species compared with H{sub 2}O and the adsorption of active oxygen at the surface, which was residual from the oxygen plasma exposure. Both effects enhance DMAI chemisorption and increase the saturation density. In addition, a longer oxygen plasma time was required at room temperature to complete the reaction and decrease the carbon contamination below the detection limit of x-ray photoemission spectroscopy. The properties of the subsequent Al{sub 2}O{sub 3} films were measured for different temperatures. When deposited at 25 °C and 200 °C, the Al{sub 2}O{sub 3} films demonstrated a single Al-O bonding state as measured by x-ray photoemission spectroscopy, a similar band gap of 6.8±0.2 eV as determined by energy loss spectroscopy, a similar index of refraction of 1.62±0.02 as determined by spectroscopic ellipsometry, and uniform growth with a similar surface roughness before and after growth as confirmed by atomic force microscopy. However, the room temperature deposited Al{sub 2}O{sub 3} films had a lower mass density (2.7 g/cm{sup 3} compared with 3.0 g/cm{sup 3}) and a higher atomic ratio of O to Al (2.1 compared with 1.6) as indicated by x-ray reflectivity and Rutherford backscattering spectroscopy, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗