Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Lanthanum pyrochlores and the effect of yttrium addition in the systems La{sub 2-x}Y{sub x}Zr{sub 2}O{sub 7} and La{sub 2-x}Y{sub x}Hf{sub 2}O{sub 7}

The crystal structures of the compounds La{sub 2-x}Y{sub x}Zr{sub 2}O{sub 7} and La{sub 2-x}Y{sub x}Hf{sub 2}O{sub 7} with x=0.0, 0.4, 0.8, 1.2, 1.6, and 2.0 have been studied using neutron powder diffraction and electron microscopy to determine the stability fields of the pyrochlore and fluorite solid solutions. The limits of pyrochlore stability in these solid solutions are found to be close to La{sub 0.8}Y{sub 1.2}Zr{sub 2}O{sub 7} and La{sub 0.4}Y{sub 1.6}Hf{sub 2}O{sub 7}, respectively. In both systems the unit cell parameter is found to vary linearly with Y content across those compositions where the pyrochlore phase is stable, as does the x-coordinate of the oxygen atoms on the 48f (x,3/8 ,3/8 ) sites. In both systems, linear extrapolations of the pyrochlore data suggest that the disordering is accompanied by a small decrease in the lattice parameter of approximately 0.4%. After the pyrochlore solid solution limit is reached, a sharp change is observed from x{approx}0.41 to 0.375 as the disordered defect fluorite structure is favoured. Electron diffraction patterns illustrate that some short-range order remains in the disordered defect fluorite phases. - Graphical abstract: Short-range ordering has been seen in the defect fluorites Y{sub 2}Zr{sub 2}O{sub 7} and Y{sub 2}Hf{sub 2}O{sub 7}, where they previously were thought to be entirely disordered. Evidence suggests the correlation length changes with composition, but is not commensurate with unit cell sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Environmentally friendly growth of single-crystalline K{sub 2}Ti{sub 6}O{sub 13} nanoribbons from KCl flux

Single-crystalline K{sub 2}Ti{sub 6}O{sub 13} nanoribbons with typical width ranging from one hundred nanometers to a few hundred nanometers and length up to tens of microns were prepared from KCl flux. The nanoribbons were characterized by a range of methods including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, selected area electron diffraction and high-resolution transmission electron microscopy. Ultraviolet-visible experiments showed that the K{sub 2}Ti{sub 6}O{sub 13} nanoribbons were wide-band semiconductors with a band width E{sub g} = 3.4 eV. The mechanism of one-dimensional growth of the nanoribbons was attributed to the oriented attachment mechanism.

36 MATERIALS SCIENCE↗

Electron Backscatter Diffraction (EBSD) Characterization of Uranium and Uranium Alloys

Electron backscatter diffraction (EBSD) was used to examine the microstructures of unalloyed uranium, U-6Nb, U-10Mo, and U-0.75Ti. For unalloyed uranium, we used EBSD to examine the effects of various processes on microstructures including casting, rolling and forming, recrystallization, welding, and quasi-static and shock deformation. For U-6Nb we used EBSD to examine the microstructural evolution during shape memory loading. EBSD was used to study chemical homogenization in U-10Mo, and for U-0.75Ti, we used EBSD to study the microstructure and texture evolution during thermal cycling and deformation. The studied uranium alloys have significant microstructural and chemical differences and each of these alloys presents unique preparation challenges. Each of the alloys is prepared by a sequence of mechanical grinding and polishing followed by electropolishing with subtle differences between the alloys. U-6Nb and U-0.75Ti both have martensitic microstructures and both require special care in order to avoid mechanical polishing artifacts. Unalloyed uranium has a tendency to rapidly oxidize when exposed to air and a two-step electropolish is employed, the first step to remove the damaged surface layer resulting from the mechanical preparation and the second step to passivate the surface. All of the alloying additions provide a level of surface passivation and different one and two step electropolishes are employed to create good EBSD surfaces. Because of its low symmetry crystal structure, uranium exhibits complex deformation behavior including operation of multiple deformation twinning modes. EBSD was used to observe and quantify twinning contributions to deformation and to examine the fracture behavior. Figure 1 shows a cross section of two mating fracture surfaces in cast uranium showing the propensity of deformation twinning and intergranular fracture largely between dissimilarly oriented grains. Deformation of U-6Nb in the shape memory regime occurs by the motion of twin boundaries formed during the martensitic transformation. Deformation actually results in a coarsening of the microstructure making EBSD more practical following a limited amount of strain. Figure 2 shows the microstructure resulting from 6% compression. Casting of U-10Mo results in considerable chemical segregation as is apparent in Figure 2a. The segregation subsists through rolling and heat treatment processes as shown in Figure 2b. EBSD was used to study the effects of homogenization time and temperature on chemical heterogeneity. It was found that times and temperatures that result in a chemically homogeneous microstructure also result in a significant increase in grain size. U-0.75Ti forms an acicular martinsite as shown in Figure 4. This microstructure prevails through cycling into the higher temperature solid uranium phases.

36 MATERIALS SCIENCE↗

Electron Backscatter Diffraction in Low Vacuum Conditions

Most current scanning electron microscopes (SEMs) have the ability to analyze samples in a low vacuum mode, whereby a partial pressure of water vapor is introduced into the SEM chamber, allowing the characterization of nonconductive samples without any special preparation. Although the presence of water vapor in the chamber degrades electron backscatter diffraction (EBSD) patterns, the potential of this setup for EBSD characterization of nonconductive samples is immense. In this chapter we discuss the requirements, advantages and limitations of low vacuum EBSD (LV-EBSD), and present how this technique can be applied to a two-phase ceramic composite as well as hydrated biominerals as specific examples of when LV-EBSD can be invaluable.

36 MATERIALS SCIENCE↗

Electron Backscattered Diffraction Analysis Of Narrow Copper Interconnects In Cross-View To Investigate Scale Effect On Microstructure

In this article, we propose to use Electron Backscattered Diffraction (EBSD) to characterize microstructure of copper interconnects of thin metal level in top view and cross view. These two views give very complementary information about microstructure of copper and thus about recrystallization of copper during annealing. Moreover, for minimum width, as interconnect is two times thicker than wide; It will be easier to analyze smaller interconnect of 45 nm node technology in cross-section. We look for evolution of texture and microstructure of copper with line width in top view and in cross view. We highlight the presence of two recrystallization mechanisms and also the fact that transition from one to the other is progressive with competition of both mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GaAs Substrate Recycling Using in-situ Deposited NaCl Layers via Molecular Beam Epitaxy

This work presents an alternative method to conventional III-V substrate recycling methods via growth of NaCl on nearly-lattice matched GaAs (001) substrates. Reflection high energy electron diffraction and transmission electron microscopy confirm an epitaxial relationship between the NaCl layers and the underlying GaAs. If the sample is heated too much prior to GaAs deposition, the NaCl fully desorbs from the surface. The quality of the deposition of GaAs on NaCl ranges from amorphous at low temperature to polycrystalline at intermediate temperatures. Exposure to electron beams during growth results in larger and (001) textured grains. The substrate is separated from the GaAs film in seconds via submersion in water, revealing a substrate surface comparable to the original.

electron beams↗

Preparation and photoluminescence study of mesoporous indium hydroxide nanorods

Mesoporous indium hydroxide nanorods were successfully synthesized by a mild one-step one-pot method. The obtained samples were characterized by X-ray diffraction, transmission electron microscopy with selected area electron diffraction, N{sub 2} adsorption, ultraviolet-visible absorption and photoluminescence, respectively. Transmission electron microscopy showed that there were some pores in the samples, which were mainly composed of rod-like shapes with length of 300 nm and diameter of 90 nm. N{sub 2} adsorption/desorption measurements confirmed that the prepared powder was mesoporous with average pore diameter of 3.1 nm. The ultraviolet-visible absorption spectroscopy analysis indicated that the band gap energy of the samples was 5.15 eV. Photoluminescence spectrum showed that there were two strong emissions under ultraviolet light irradiation. The growth mechanism of indium hydroxide nanorods and the role of cetyltrimethyl ammonium bromide were also discussed.

36 MATERIALS SCIENCE↗

Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by charge flipping method

Samples with five different zirconium carbide compositions (C/Zr molar ratio=0.84, 0.89, 0.95, 1.05, and 1.17) have been fabricated and studied using a variety of experimental techniques. Each sample was zone refined to ensure that the end product was polycrystalline with a grain size of 10-100 {mu}m. It was found that the lattice parameter was largest for the x=0.89 composition and smallest for the x=1.17 total C/Zr composition, but was not linear; this nonlinearity is possibly explained using electron densities calculated using charge flipping technique. Among the five samples, the unit cell of the ZrC{sub 0.89} sample showed the highest electron density, corresponding to the highest carbon incorporation and the largest lattice parameter. The ZrC{sub 0.84} sample showed the lowest carbon incorporation, resulting in a larger number of carbon vacancies and resultant strain. Samples with larger carbon ratios (x=0.95, 1.05, and 1.17) showed a slight decrease in lattice parameter, due to a decrease in electron density. Optical anisotropy measurements suggest that these three samples contained significant amounts of a graphitic carbon phase, not bonded to the Zr atoms. - Graphical abstract: Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by the charge flipping method. Highlights: Black-Right-Pointing-Pointer The lattice parameter variation: ZrC{sub 0.89}>ZrC{sub 0.84}>ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}. Black-Right-Pointing-Pointer Surface oxygen with no correlation to the lattice parameter variation. Black-Right-Pointing-Pointer ZrC{sub 0.89} had highest electron densities correspond to highest carbon incorporation. Black-Right-Pointing-Pointer Second highest lattice parameter in ZrC{sub 0.84} due to strain. Black-Right-Pointing-Pointer Unit cell electron density order: ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasi-two-dimensional electron gas at the epitaxial alumina/SrTiO{sub 3} interface: Control of oxygen vacancies

In this paper, we report on the highly conductive layer formed at the crystalline γ-alumina/SrTiO{sub 3} interface, which is attributed to oxygen vacancies. We describe the structure of thin γ-alumina layers deposited by molecular beam epitaxy on SrTiO{sub 3} (001) at growth temperatures in the range of 400–800 °C, as determined by reflection-high-energy electron diffraction, x-ray diffraction, and high-resolution electron microscopy. In situ x-ray photoelectron spectroscopy was used to confirm the presence of the oxygen-deficient layer. Electrical characterization indicates sheet carrier densities of ∼10{sup 13 }cm{sup −2} at room temperature for the sample deposited at 700 °C, with a maximum electron Hall mobility of 3100 cm{sup 2}V{sup −1}s{sup −1} at 3.2 K and room temperature mobility of 22 cm{sup 2}V{sup −1}s{sup −1}. Annealing in oxygen is found to reduce the carrier density and turn a conductive sample into an insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomically smooth and single crystalline Ge(111)/cubic-Pr{sub 2}O{sub 3}(111)/Si(111) heterostructures: Structural and chemical composition study

Engineered wafer systems are an important materials science approach to achieve the global integration of single crystalline Ge layers on the Si platform. Here, we report the formation of single crystalline, fully relaxed Ge(111) films by molecular beam epitaxial overgrowth of cubic Pr oxide buffers on Si(111) substrates. Reflection high-energy electron diffraction, scanning electron microscopy, and x-ray reflectivity show that the Ge epilayer is closed, flat, and has a sharp interface with the underlying oxide template. Synchrotron radiation grazing incidence x-ray diffraction and transmission electron microscopy reveal the type-A/B/A epitaxial relationship of the Ge(111)/cubic Pr{sub 2}O{sub 3}(111)/Si(111) heterostructure, a result also corroborated by theoretical ab initio structure calculations. Secondary ion mass spectroscopy confirms the absence of Pr and Si impurities in the Ge(111) epilayer, even after an annealing at 825 deg. C.

36 MATERIALS SCIENCE↗

Preparation of Mn{sub 2}SnO{sub 4} nanoparticles as the anode material for lithium secondary battery

The ultrafine Mn{sub 2}SnO{sub 4} nanoparticles with diameters of 5-10 nm have been prepared by thermal decomposition of precursor MnSn(OH){sub 6}. The MnSn(OH){sub 6} nanoparticles precursor was synthesized by a hydrothermal microemulsion method. X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy and electron diffraction have been employed to characterize the crystal structures and morphologies of the as-prepared samples. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The thermal characterization was studied by differential thermal analysis and thermogravimetry analysis measurements. Electrochemical test showed that the Mn{sub 2}SnO{sub 4} nanoparticles exhibited a high initial charge-discharge capacity of 1320 mAh/g.

36 MATERIALS SCIENCE↗

Large-scale and shape-controlled synthesis and characterization of nanorod-like nickel powders under microwave radiation

Graphical abstract: The nanorod-like pure nickel were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The materials were characterized by XRD, SEM, EDS, HRTEM, and selected-area electron diffraction, etc. The lattice expansion for Ni powders was explained in detail. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of Ni nanorod-like (fcc) were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Highlights: Black-Right-Pointing-Pointer The synthesis of nanorod-like nickel under microwave irradiation. Black-Right-Pointing-Pointer Nitrogen generated in reaction as a shielding gas. Black-Right-Pointing-Pointer The lattice expansion for Ni powders was explained in detail. Black-Right-Pointing-Pointer Magnetic properties of Ni were quite different from those of Ni nanoparticles. -- Abstract: The nanorod-like nickel powders were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The morphology and structure of as-prepared products could be easily tuned by adjusting process parameters such as pH value and microwave irradiation time. The resulting materials were characterized by X-ray diffraction (XRD), scanning electron microscope, transmission electron microscopy and selected-area electron diffraction (SAED). The results demonstrated that pure nickel powders with face-centered cubic (fcc) structure were prepared at relatively mild condition and no characteristic peaks of nickel oxide in the XRD pattern were found. The phenomenon of lattice expansion for Ni powders was explained in details according to the XRD theory. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of nanorod-like (fcc) Ni powders were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Furthermore, it had more strong ferromagnetic properties than that of Ni powders both bulk and nanoparticles.

36 MATERIALS SCIENCE↗

Preparation and characterization of ZnO-TiO{sub 2} nanocomposite for photocatalytic disinfection of bacteria and detoxification of cyanide under visible light

Highlights: {yields} ZnO-TiO{sub 2} nanocomposite, obtained by modified ammonia-evaporation-induced synthetic method, absorbs visible light. {yields} ZnO-TiO{sub 2} nanoparticles catalyze bacteria disinfection and cyanide detoxification under sunlight. {yields} ZnO-TiO{sub 2} nanocomposite is selective in photocatalysis. -- Abstract: ZnO-TiO{sub 2} nanocomposite was prepared by modified ammonia-evaporation-induced synthetic method. It was characterized by powder X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and energy dispersive X-ray, UV-visible diffuse reflectance, photoluminescence and electrochemical impedance spectroscopies. Incorporation of ZnO leads to visible light absorption, larger charge transfer resistance and lower capacitance. The nanocomposite effectively catalyzes the inactivation of E. coli under visible light. Further, the prepared nanocomposite displays selective photocatalysis. While its photocatalytic efficiency to detoxify cyanide with visible light is higher than that of TiO{sub 2} P25, its efficiency to degrade methylene blue, sunset yellow and rhodamine B dyes under UV-A light is less than that of TiO{sub 2} P25.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mapping of axial strain in InAs/InSb heterostructured nanowires

The article presents a mapping of the residual strain along the axis of InAs/InSb heterostructured nanowires. Using confocal Raman measurements, we observe a gradual shift in the transverse optical phonon mode along the axis of these nanowires. We attribute the observed shift to a residual strain arising from the InAs/InSb lattice mismatch. We find that the strain is maximum at the interface and then monotonically relaxes towards the tip of the nanowires. We also analyze the crystal structure of the InSb segment through selected area electron diffraction measurements and electron diffraction tomography on individual nanowires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoactive transparent nano-crystalline glass-ceramic for remazole red dye degradation

Graphical abstract: Display Omitted Highlights: ► Preparation and characterization of novel transparent nanocrystalline glass-ceramic. ► Precipitation of photoactive phases by using controlled heat-treatment. ► Conservation of transparency along with photoactivity. ► Using the prepared nanocrystalline glass-ceramic in water purification. -- Abstract: Transparent glass ceramic material was prepared from alkali-borosilicate glass containing titania by proper heat treatment scheme. The prepared samples were characterized using differential thermal analysis, X-ray diffraction, transmission electron microscope, selected area electron diffraction and UV–visible spectroscopy. The applied heat treatment program allowed the crystallization of nano-crystalline anatase, rutile, barium titanate, titanium borate and silicate phases while maintaining the transparency. The precipitated nano-crystalline anatase and rutile phases were responsible for the observed high photocatalytic activity of the prepared samples. Samples of 24.29 and 32.39 TiO{sub 2} wt% showed better efficiency for the decolorization of remazole red dye compared with commercial-TiO{sub 2} used in preparation of glass-ceramic. The reuse of prepared glass-ceramic photocatalyst with nearly same efficiency for different times was also proved.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the phase relations in the U-Al-Ge ternary system: Influence of the Al/Ge substitution on the properties of the intermediate phases

The phase relations within the U-Al-Ge ternary system were studied for two isothermal sections, at 673 K for the whole Gibbs triangle and at 1173 K for the concentration range 25–100 at% U. The identification of the phases, their composition ranges and stability were determined by x-ray powder diffraction, scanning electron microscopy coupled to energy dispersive spectroscopy and differential thermal analysis. The tie-lines and the solubility domains were determined for the U-Ge and U-Al binaries, the UAl{sub 3}-UGe{sub 3} solid-solution and for the unique ternary intermediate phase U{sub 3}Al{sub 2−x}Ge{sub 3+x}. The experimental isopleth section of the pseudo-binary UAl{sub 3}-UGe{sub 3} reveals an isomorphous solid solution based on the Cu{sub 3}Au-type below the solidus. The U{sub 3}Al{sub 2−x}Ge{sub 3+x} solid solution extends for −0.1≤x≤1.35 and −0.2≤x≤1.5 at 673 K and 1173 K respectively. It crystallizes in the I-centered tetragonal symmetry. The reciprocal lattice of several compositions of the U{sub 3}Al{sub 2−x}Ge{sub 3+x} solid solution was examined by electron diffraction at room temperature, revealing the presence of a c-glide plane. Their crystal structure was refined by single crystal x-ray diffraction suggesting an isomorphous solid solution best described with the non-centrosymmetric space group I4cm in the paramagnetic domain. The magnetic measurements confirm the ferromagnetic ordering of the solid solution U{sub 3}Al{sub 2−x}Ge{sub 3+x} with an increase of Tc with the Al content. The thermal variation of the specific heat bear out the magnetic transitions with some delocalized character of the uranium 5f electrons. - Graphical abstract: The phase relations within the U-Al-Ge ternary system were experimentally assessed for two isothermal sections, at 673 K for the whole Gibbs triangle and at 1173 K for the concentration range 25–100 at% U. A complete UAl{sub 3}-UGe{sub 3} solid-solution based on the Cu{sub 3}Au-type forms below the solidus. A unique ternary phase showing a large homogeneity domain, U{sub 3}Al{sub 2−x}Ge{sub 3+x} for −0.1≤x≤1.35 and −0.2≤x≤1.5 at 673 K and 1173 K respectively has been evidenced. It is best described with the non-centrosymmetric space group I4cm above room temperature. A linear increase of the ferromagnetic ordering is observed with the Al content. - Highlights: • Isothermal sections of the U-Al-Ge system were investigated for 673 K and 1173 K. • An isomorphous solid-solution UAl{sub 3}-UGe{sub 3} forms for the whole composition range. • U{sub 3}Al{sub 2−x}Ge{sub 3+x} the unique ternary phase to form exists for a large homogeneity domain. • U{sub 3}Al{sub 2−x}Ge{sub 3+x} is best described in I4cm space group above room temperature. • The ferromagnetic transition of U{sub 3}Al{sub 2−x}Ge{sub 3+x} linearly increases with the Al content.

36 MATERIALS SCIENCE↗

In situ investigation of the early stage of TiO{sub 2} epitaxy on (001) SrTiO{sub 3}

We report on a systematic study of the growth of epitaxial TiO{sub 2} films deposited by pulsed laser deposition on Ti-terminated SrTiO{sub 3} (001) single crystals. By using in situ reflection high energy electron diffraction, low energy electron diffraction, x-ray photoemission spectroscopy, and scanning probe microscopy, we show that the stabilization of the anatase (001) phase is preceded by the growth of a few nanometers thick pseudomorphic Sr{sub x}TiO{sub 2+y} (x, y < 1) intermediate layer. The data demonstrate that the formation of this intermediate phase is related to the activation of a long range Sr migration from the SrTiO{sub 3} substrate into the film. Our results enrich the phase diagram of the Sr-Ti-O system under epitaxial strain opening a route for the study of the electronic and dielectric properties of the reported Sr-deficient SrTiO{sub 3} phase.

36 MATERIALS SCIENCE↗

Preparation, characterization, and optical properties of nano- and submicron-sized Y{sub 2}O{sub 3}:Eu{sup 3+} phosphors

Ultrafine Y{sub 2}O{sub 3}:Eu{sup 3+} phosphors were prepared by a modified solution combustion method. The as-prepared samples with sizes of 17.6-80 nm (nanophosphors) and 300 nm (submicron phosphors) were characterized by x-ray diffraction, transmission electron microscope, scanning electron microscopy, selected area electron diffraction, and energy dispersive x-ray spectroscopy. The emission spectra of the samples are unchanged in comparison with that of standard material. The excitation spectra show a redshift in the charge-transfer-state band and a blueshift in the host gap band. In relation to commercial sample, the relative luminescence intensities of nano- and submicron phosphors are increased sufficiently to 64.4% and 93.6%, respectively. Higher quenching concentration of the activator Eu{sup 3+} ion was observed in the nanophosphor than that in the phosphor synthesized by solid state reaction.

36 MATERIALS SCIENCE↗