Composite metallic and dielectric insulators for high current arc electrodes.
Composite metallic and dielectric insulators for high current arc electrodes
DIELECTRIC MATERIAL↗
SEARCH · Engineering Papers
Results for “Electrode structure”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of improved plaque material for aerospace nickel-cadmium cells Final progress report, 17 Nov. 1969 - 17 Nov. 1970
Electroforming thin nickel foil electrodes of porous honeycomb structure to increase nickel-cadmium battery service life
Goebel, F.↗
Ion acoustic wave detection using a continuous channel electron multiplier
Ion acoustic waves propagation and structure measurements with metal electrode technique and continuous channel electron multiplier in plasma wind tunnel
Rehmann, W. K.↗
Pulsed plasma propulsion system for North-South stationkeeping
A completely integrated pulsed plasma propulsion system for North-South stationkeeping has been developed. System testing on a thrust balance has provided following new results: (1) A simple, helically coiled, spring-fed propellant subsystem for 38,284 lb-s (166,000 N-S) total impulse is feasible; (2) The propulsive performance level is compatible with North-South stationkeeping requirements; (3) Power conditioning is as simple as that of the space flight proven microthruster system; (4) Vacuum compatible, high energy density capacitors (40 joules/lb) capacitors have been developed and tested as part of the system; (5) 10,000 lb-sec of total impulse has been generated. Future improvements will include reducing electrode erosion, improving the structural rigidity of the assembly and continuously operating the system until 37,000 lb-sec of total impulse have been generated.
Guman, W. J.↗
Preliminary results: Root cause investigation of orbital anomalies and failures in NASA standard 50 ampere-hour nickel-cadmium batteries
Two lots of NASA standard 50 A.H. Ni-Cd battery cells, manufactured by Gates Aerospace Batteries and built into batteries by McDonnell Douglas, have experienced significant performance problems. The two lots were used on the Compton Gamma Ray Observatory and the Upper Atmosphere Research Satellite. Both of these satellites are Low Earth Orbital (LEO) satellites containing batteries on a parallel bus charged to NASA standard V/T curves using a NASA standard power regulator. The following preliminary conclusions were reached: (1) several plate and cell parameters have migrated within their spec limits over the years (in some cases, from one extreme to the other); (2) several parametric relationships, not generally monitored and therefore not under specification control, have also migrated over the years; (3) many of these changes appear to have taken place as a natural consequence of changes in GE/GAB materials and processes; (4) several of these factors may be 'conspiring' to aggravate known cell failure mechanisms (factors such as heavier plate, less teflon and/or less-uniform teflon, and less electrolyte) but all are still in spec (where specs exist); (5) the weight of the evidence collected to characterize the anomalies and to characterize the negative electrode itself, strongly suggests that alterations to the structure, composition, uniformity, and efficiency of the negative electrode are at the heart of the battery performance problems currently being experienced; and (6) further investigation at all levels (plate, cell, battery, and system) continues to be warranted.
Toft, Mark R.↗
Gridded electron reversal ionizer
A gridded electron reversal ionizer forms a three dimensional cloud of zero or near-zero energy electrons in a cavity within a filament structure surrounding a central electrode having holes through which the sample gas, at reduced pressure, enters an elongated reversal volume. The resultant negative ion stream is applied to a mass analyzer. The reduced electron and ion space-charge limitations of this configuration enhances detection sensitivity for material to be detected by electron attachment, such as narcotic and explosive vapors. Positive ions may be generated by generating electrons having a higher energy, sufficient to ionize the target gas and pulsing the grid negative to stop the electron flow and pulsing the extraction aperture positive to draw out the positive ions.
Chutjian, Ara↗
Design and Simulation of a MEMS Structure for Electrophoretic and Dielectrophoretic Separation of Particles by Contactless Electrodes
Rapid identification of pathogenic bacterial species is an important factor in combating public health problems such as E. coli contamination. Food and waterborne pathogens account for sickness in 76 million people annually (CDC). Diarrheagenic E. coli is a major source of gastrointestinal illness. Severe sepsis and Septicemia within the hospital environment are also major problems. 75 1,000 cases annually with a 30-50% mortality rate (Crit Care Med, July '01, Vol. 29, 1303-10). Patient risks run the continuum from fever to organ failure and death. Misdiagnosis or inappropriate treatment increases mortality. There exists a need for rapid screening of samples for identification of pathogenic species (Certain E. coli strains are essential for health). Critical to the identification process is the ability to isolate analytes of interest rapidly. This poster discusses novel devices for the separation of particles on the basis of the dielectric properties, mass and surface charge characteristics is presented. Existing designs involve contact between electrode surfaces and analyte medium resulting in contamination of the electrode bearing elements Two different device designs using different bulk micromachining MEMS processes (PolyMUMPS and a PyrexBIGold electrode design) are presented. These designs cover a range of particle sizes from small molecules through eucaryotic cells. The application of separation of bacteria is discussed in detail. Simulation data for electrostatic and microfluidic characteristics are provided. Detailed design characteristics and physical features of the as fabricated PolyMUMPS design are provided. Analysis of the simulation data relative to the expected performance of the devices will be provided and subsequent conclusions discussed.
Shaw, Harry C.↗
Development and Testing of High Surface Area Iridium Anodes for Molten Oxide Electrolysis
Processing of lunar regolith into oxygen for habitat and propulsion is needed to support future space missions. Direct electrochemical reduction of molten regolith is an attractive method of processing, because no additional chemical reagents are needed. The electrochemical processing of molten oxides requires high surface area, inert anodes. Such electrodes need to be structurally robust at elevated temperatures (1400-1600 C), be resistant to thermal shock, have good electrical conductivity, be resistant to attack by molten oxide (silicate), be electrochemically stable and support high current density. Iridium with its high melting point, good oxidation resistance, superior high temperature strength and ductility is the most promising candidate for anodes in high temperature electrochemical processes. Several innovative concepts for manufacturing such anodes by electrodeposition of iridium from molten salt electrolyte (EL-Form process) were evaluated. Iridium electrodeposition to form of complex shape components and coating was investigated. Iridium coated graphite, porous iridium structure and solid iridium anodes were fabricated. Testing of electroformed iridium anodes shows no visible degradation. The result of development, manufacturing and testing of high surface, inert iridium anodes will be presented.
Shchetkovskiy, Anatoliy↗
Development and Testing of High Surface Area Iridium Anodes for Molten Oxide Electrolysis
Processing of lunar regolith into oxygen for habitat and propulsion is needed to support future space missions. Direct electrochemical reduction of molten regolith is an attractive method of processing, because no additional chemical reagents are needed. The electrochemical processing of molten oxides requires high surface area, inert anodes. Such electrodes need to be structurally robust at elevated temperatures (1400-1600?C), be resistant to thermal shock, have good electrical conductivity, be resistant to attack by molten oxide (silicate), be electrochemically stable and support high current density. Iridium with its high melting point, good oxidation resistance, superior high temperature strength and ductility is the most promising candidate for anodes in high temperature electrochemical processes. Several innovative concepts for manufacturing such anodes by electrodeposition of iridium from molten salt electrolyte (EL-Form? process) were evaluated. Iridium electrodeposition to form of complex shape components and coating was investigated. Iridium coated graphite, porous iridium structure and solid iridium anodes were fabricated. Testing of electroformed iridium anodes shows no visible degradation. The result of development, manufacturing and testing of high surface, inert iridium anodes will be presented.
Shchetkovskiy, Anatoliy↗
Effect of Si Content in Electrode and SiO2 Additions to the Slag during Electroslag Remelting
Evolution of Si concentration in 316 stainless steel electrodes was observed during a melting campaign consisting of recycling electroslag remelted (ESR) ingots to make new electrodes using vacuum induction melting (VIM). This campaign consisted of iterations of VIM + ESR operations to optimize melting parameters. The effect of Si content on the melt parameters and ingot quality was further evaluated and additions of SiO2 to the slag chemistry were studied using research-scale experiments, x-ray diffraction (XRF), combustion analysis, visual inspections, and computational tools. The Si concentration was found to decrease by approximately 600 ppm following ESR of 150 lb. research-scale electrodes. Eventually, this led to failure of the slag skin and direct ingot/crucible contact. Additions of SiO2 to the slag at levels matching the original calculated Si concentration in the electrode did not eliminate the slag skin failure and the current during steady state increased to maintain a constant melt rate. In this investigation, we propose a mechanism of slag skin failure consisting of local concentration of current density due to absence, or breakage, of the SiO2 layer around the molten metal drop during ESR. This theory was reinforced by additional experiments in which Nb was added to the electrode to change the structure of the oxide layer around the drops.
Jablonski, Paul↗
Multi-technique characterization of spray coated and roll-to-roll coated gas diffusion fuel cell electrodes
Here this work reports the characterization of catalyst layer (CL) structure and composition for a set of gas-diffusion electrodes (GDEs) fabricated by different coating methods with the goal of developing a better understanding of CL processing-structure-property-performance relationships. The CL coating techniques used in this study were ultrasonic spray coating, and two roll-to-roll (R2R) methods - gravure and slot die. Scanning transmission electron microscopy (STEM) coupled with X-ray energy dispersive spectroscopy (EDS) analysis of GDE cross-sections provided bulk information, while scanning electron microscopy (SEM) with EDS and X-ray photoelectron spectroscopy (XPS) were used to investigate the near surface and surface composition of the CLs that will be in direct contact with the membrane once the membrane electrode assembly (MEA) is constructed. This study demonstrates that common quantification parameters, namely the F:Pt ratio extracted from cross-sectional STEM-EDS maps and top-down CL measurements with SEM and XPS, along with roughness parameters quantified from SEM micrographs are useful parameters in explaining and potentially predicting performance trends. Additionally, it highlights the importance of understanding key CL surface properties for advancing the manufacturability of high-performance components for polymer electrolyte membrane (PEM) technologies.
30 DIRECT ENERGY CONVERSION↗
Development of Chromium and Sulfur Getter for Solid Oxide Fuel Cell (SOFC) System
Under the “real world” SOFC operating conditions, gaseous Cr and S species coexist in air stream. The combined Cr and S effect on the electrochemical poisoning of candidate LSM and LSCF electrodes has been investigated. Electrochemical and structural analysis revealed that the combined Cr and S interactions with the LSCF electrode remains significantly different from those of the individual Cr and S interactions. S reacts with the surface SrO accompanied by morphological changes whereas the hexavalent gaseous Cr species mainly deposit at the LSCF/GDC interface as is the case with Cr-only poisoning. For LSM electrode, the combined interactions of Cr and S remains similar to the sum of individual Cr and S effects as SO 2 reacts with Sr-rich regions of the bulk LSM, while Cr deposits at the electrochemically active sites. The use of getter, consisting of alkaline earth and transition metal oxides, has been proposed as a cost-effective approach to mitigate electrode poisoning. SrMnO 3 (SMO) is suggested as a robust getter material for the co-capture of airborne gaseous S and Cr species entering high-temperature electrochemical systems. The honeycomb getter forms, covered with SMO nanoparticles, were fabricated using dip coating. The SMO getter successfully maintained the electrochemical activity of LSM under the presence of gaseous Cr and S species, validating the efficacy of the getter. Post-test characterization revealed that the absorption of S and Cr contaminants led to the elongation of granular SMO particles, forming SrO nanorods and SrCrO 4 whiskers leaving Mn oxides underneath where inward-migrating Cr reside, indicating the high mutual affinity of Sr and Mn. The growth of reaction products during the long term exposure favors continued absorption of incoming S and Cr contaminants. The Mn 2 O 9 dimers, existing on the surface, are considered to help absorb S and Cr impurities, along with the Sr-terminated surface. The SMO getter also displays robust stability in humid environments at high temperatures without phase transformation or hydrolysis, fulfilling the requirement for operation in high-temperature electrochemical systems.
30 DIRECT ENERGY CONVERSION↗
(CrMnCoNiTi) 3 O 4 high-entropy spinel oxide as a high-performance electrode for supercapacitors
In this study, spinel-structured (CrMnCoNiTi)₃O₄ high-entropy oxides (HEOs) have been successfully synthesized using the solution combustion method, and their performance as supercapacitor electrode materials was investigated. These HEOs exhibit excellent performance, stemming from the unique high-entropy effect and lattice distortion. This structure effectively buffers volumetric strain during cycling, conferring the material with extremely high structural stability and specific capacity. The material demonstrates a high specific capacity of 491.5 C∙g⁻¹ at a current density of 0.5 A∙g⁻¹. Furthermore, it shows extraordinary cycling stability: after 10,000 charge/discharge cycles at 5 A∙g⁻¹, the capacity retention rate is 99%, and the Coulombic efficiency consistently remains close to 100%. Ex-situ structural characterizations further reveal that this excellent cycling durability originates from a cooperative multination valence reconstruction mechanism within an entropy-stabilized spinel framework. Additionally, a symmetric supercapacitor assembled using this material and 1 M KOH electrolyte successfully extended the working voltage to 1.2 V. This research highlights the great potential of high-entropy oxides in synergizing high energy density and ultra-long cycling life, laying a solid foundation for the development of next-generation high-performance supercapacitor electrode materials.
High entropy oxides↗
Defect redistribution along grain boundaries in SrTiO 3 by externally applied electric fields
During thermal annealing at 1425 °C nominal electric field strengths of 50 V/mm and 150 V/mm were applied along the grain boundary planes of a near 45° (100) twist grain boundary in SrTiO 3 . Electron microscopy characterization revealed interface expansions near the positive electrode around 0.8 nm for either field strength. While the interface width decreased to roughly 0.4 nm after annealing at 50 V/mm, the higher field strength caused decomposition of the boundary structure close to the negative electrode. Electron energy-loss and X-ray photoelectron spectroscopies demonstrated an increased degree of oxygen sublattice distortion at the negative electrode side, and enhanced concentrations of Ti 3+ and Ti 2+ compared to bulk for both single crystals and bicrystals annealed with an external electric field, respectively. Oxygen migration due to the applied electric field causes the observed alteration of grain boundary structures. At sufficiently high field strength the agglomeration of anion vacancies may lead to the decomposition of the grain boundary.
36 MATERIALS SCIENCE↗
Capacitance of thin films containing polymerized ionic liquids
Electrode-polymer interfaces dictate many of the properties of thin films such as capacitance, the electric field experienced by polymers, and charge transport. However, structure and dynamics of charged polymers near electrodes remain poorly understood, especially in the high concentration limit representative of the melts. To develop an understanding of electric field–induced transformations of electrode-polymer interfaces, we have studied electrified interfaces of an imidazolium-based polymerized ionic liquid (PolyIL) using combinations of broadband dielectric spectroscopy, specular neutron reflectivity, and simulations based on the Rayleigh’s dissipation function formalism. Overall, we obtained the camel-shaped dependence of the capacitance on applied voltage, which originated from the responses of an adsorbed polymer layer to applied voltages. This work provides additional insights related to the effects of molecular weight in affecting structure and properties of electrode-polymer interfaces, which are essential for designing next-generation energy storage and harvesting devices.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Unraveling the Structure and Composition of Li 4 Mn 2 O 4.5 (Li 2 O·Li 0.667 Mn 1.333 O 2 ) Electrodes for Lithium Batteries Using a High-Temperature Synthesis Approach
This paper addresses the debate about the composition and structure of a lithium-rich manganese oxide electrode with a fully disordered rock salt component, Li 4 Mn 2 O 5 (or Li 2 O·2LiMnO 2 ), first reported by Freire et al. in 2016; it is typically prepared by a high-energy ball milling procedure. It has now been demonstrated that, when prepared at 800°C, the formula of this compound is Li 4 Mn 2 O 4.5 , alternatively Li 2 O·Li 0.667 Mn 1.333 O 2 , or close thereto. The cubic, disordered Li 0.667 Mn 1.333 O 2 (or Li 0.333 Mn 0.667 O) rock salt component, in which the manganese ions adopt an average oxidation state of 2.5+, transforms to a clearly-defined spinel configuration during electrochemical cycling. The electrochemical activation process that occurs during the initial charge reaction includes the oxidation of the manganese ions by oxygen released by the Li 2 O component between 4.5 and 4.6 V. In complete contrast, nickel- and nickel-cobalt-substituted electrodes, such as Li 2 O·2LiMn 0.5 Ni 0.5 O 2 (Li 4 MnNiO 5 ) and Li 2 O·2LiMn 0.475 Ni 0.475 Co 0.050 O 2 (Li 4 Mn 0.95 Ni 0.95 Co 0.10 O 5 ), in which the manganese ions adopt a tetravalent state, have completely disordered rock salt components that are electrochemically inactive.
25 ENERGY STORAGE↗
3D‐Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels
Abstract The performance of pseudocapacitive electrodes at fast charging rates are typically limited by the slow kinetics of Faradaic reactions and sluggish ion diffusion in the bulk structure. This is particularly problematic for thick electrodes and electrodes highly loaded with active materials. Here, a surface‐functionalized 3D‐printed graphene aerogel (SF‐3D GA) is presented that achieves not only a benchmark areal capacitance of 2195 mF cm −2 at a high current density of 100 mA cm −2 but also an ultrahigh intrinsic capacitance of 309.1 µF cm −2 even at a high mass loading of 12.8 mg cm −2 . Importantly, the kinetic analysis reveals that the capacitance of SF‐3D GA electrode is primarily (93.3%) contributed from fast kinetic processes. This is because the 3D‐printed electrode has an open structure that ensures excellent coverage of functional groups on carbon surface and facilitates the ion accessibility of these surface functional groups even at high current densities and large mass loading/electrode thickness. An asymmetric device assembled with SF‐3D GA as anode and 3D‐printed GA decorated with MnO 2 as cathode achieves a remarkable energy density of 0.65 mWh cm −2 at an ultrahigh power density of 164.5 mW cm −2 , outperforming carbon‐based supercapacitors operated at the same power density.
asymmetric supercapacitors↗
Gradient Architecture Design in Scalable Porous Battery Electrodes
Because it has been demonstrated to be effective toward faster ion diffusion inside the pore space, low-tortuosity porous architecture has become the focus in thick electrode designs, and other possibilities are rarely investigated. Here, to advance current understanding in the structure-affected electrochemistry and to broaden horizons for thick electrode designs, we present a gradient electrode design, where porous channels are vertically aligned with smaller openings on one end and larger openings on the other. With its 3D morphology carefully visualized by Raman mapping, the electrochemical properties between opposite orientations of the gradient electrodes are compared, and faster energy storage kinetics is found in larger openings and more concentrated active material near the separator. As further verified by simulation, this study on gradient electrode design deepens the knowledge of structure-related electrochemistry and brings perspectives in high-energy battery electrode designs.
25 ENERGY STORAGE↗