SEARCH · Engineering Papers
Results for “ELECTROLYSIS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Modeling the Effect of Material Properties on Liquid-Alkaline Water Electrolysis
Liquid-alkaline water electrolyzers (LAWEs) use electricity to drive the conversion of water to H 2 and O 2 gas. These devices benefit from the use of low-cost nickel electrodes and metal-oxide separators, but suffer from lower current densities and higher cell voltages than proton-exchange-membrane water electrolyzers. Identifying the inefficiencies that result in this poor performance is key to mitigating losses and optimizing LAWEs. Here, we report an experimentally-validated 1-D continuum model of a LAWE that elucidates the gradients within the cell, simulates H 2 crossover, and projects the energy improvements made possible by modulating the properties of the electrodes and separator. The model captures the Nernstian polarization losses and the distribution of gas- and liquid-phases within the electrodes, enabling quantification of energy losses associated with kinetic, ohmic, and bubble-induced (mass-transport) resistances. Simulations demonstrate that LAWE can achieve energy intensities of 50 kWh kg −1 of H 2 at 1 A cm −2 using improved electrode and separator properties.
CO 2 Electrolysis Using Metal-Supported Solid Oxide Cells with Infiltrated Pr 0.5 Sr 0.4 Mn 0.2 Fe 0.8 O 3-$δ$ Catalyst
Electrochemical conversion of CO 2 to CO is demonstrated with symmetric-structured metal supported solid oxide cells (MS-SOC). Perovskite Pr 0.5 Sr 0.4 Mn 0.2 Fe 0.8 O 3-δ (PSMF) and Pr 6 O 11 catalysts were infiltrated into the MS-SOC cathode and anode, using 3 cycles with firing at 850 °C and 8 cycles with firing at 800 °C, respectively. Upon reduction during operation, the perovskite PSMF was transformed to Ruddlesden–Popper structure with a highly efficient electrocatalytic activity. The impact of operating temperature (600–800 °C) and overpotential (0–1.8 V) on the CO 2 conversion was investigated. The highest CO 2 conversion of 57.2% was achieved at 750 °C and 1.8 V. During extended operation for 150 h at 750 °C and 1.2 V, a cell demonstrated relatively stable performance, with initial current density of 535 mA cm -2 and CO 2 conversion of 23%. Degradation mechanisms were studied by posttest characterization.
Mechanistic and Mitigation-Strategy Insights into NaCl and CaCl 2 Contamination of Proton-Exchange-Membrane Water Electrolysis Using Continuum Modeling
Cationic contaminants are detrimental to proton-exchange-membrane water electrolyzers (PEMWEs). To obtain insight, a 1-D, nonisothermal, multiphase continuum cell model including cationic contamination is developed. Simulations of steady-state cell performance predict decreased performance due to an increase in kinetic overpotential associated with the hydrogen-evolution reaction, which was attributed to decreased protonic-activity within the cathode catalyst layer from proton supplantation with contaminant cations. The accumulation and extent of cation exchange in the cathode catalyst layer depends on the operating current density due to migration. Simulations of cell recovery of potential suggest that a contaminated cell can recover approximately 78% (450 mV) with 24 h of constant current density operation at 2 A cm –2 , with higher current densities accelerating reduced recovery times. Parametric studies show that anode-side acidification at lower current densities inhibit cation contaminant adsorption, and cathode-side acidification at larger current densities facilitate the expulsion of adsorbed cations; for a cathode-side pH of 6 and 5, the cell can recover an additional 10% and 100% performance, respectively. Overall, the model serves as a framework for modeling other aspects of PEMWE systems to address durability and performance aspects, which can assist in improving the viability of the technology.
A Full-Cell Model for Direct Toluene Electro-Hydrogenation Electrolysis
Liquid organic hydrogen carriers (LOHCs) are organic molecules that undergo a hydrogenation/dehydrogenation cycle to enable storage and transportation of hydrogen fuel under ambient conditions. One promising LOHC candidate is toluene, which can be converted to methylcyclohexane (MCH) electrochemically, enabling a decarbonized process when green electricity is used. In this study, we developed a full-cell model for the direct electro-hydrogenation of toluene to MCH, utilizing a zero-gap membrane electrode assembly architecture. The model incorporates electrochemical kinetics, ionic transport, water transport across the membrane, and mass transport effects. Electrochemical kinetics are characterized using Tafel analysis on Pt/Ru catalyst. The model is validated against experimental data, including polarization curves, Faradaic efficiencies, and water crossover. A voltage breakdown analysis shows that the performance is dominated by kinetic losses, and the model is used to carry out a comparison of different toluene electro-hydrogenation reaction catalysts. Finally, a sensitivity analysis is conducted on key design parameters illustrating which can be modified to maximize electrolyzer performance. The cathode specific surface area and cathode porous transport layer thickness (PTL) have the largest impact on the current density, while the PTL thickness and Pt loading in the PTL have the largest impact on Faradaic efficiency.
The Impact of Catalyst Layer Properties and Transport Layer Interactions on Rutile Iridium Oxide Anode Durability in Proton Exchange Membrane Electrolysis
The performance and durability of proton exchange membrane electrolyzers are governed by the interplay between catalyst inks and integration, the resulting catalyst layer (CL) structure, and the interface between the CL and porous transport layer (PTL). In this study, we examine the impact of these factors on cell performance and degradation using rutile IrO2 as the anode catalyst. The two commercial rutile IrO2 catalysts differ from each other and from the amorphous benchmark in agglomerate size and ink stability. This has implications for CL morphology and electronic connectivity. In the context of long-term pressurized operation for up to 1000 h, the selection of the PTL has a marginal effect on the durability of CLs with good structural and compositional properties, whereas poorly structured CLs demonstrate evident degradation when used with certain PTLs. Poor CL properties amplify the negative impact of non-ideal CL/PTL interfaces, demonstrating the importance of CL/PTL interface engineering.
In-Operando Measurement of Hydrogen Crossover in Proton Exchange Membrane Electrolysis Cells at Differential Pressures
Explore the source record for details and available documents.
Optimization of Extrinsic Impact Factors for Improving Performance and Mitigating Performance Degradation of LSCF-SDC/YSZ/Ni-YSZ Cells Under Solid Oxide Electrolysis Operation
18th International Symposium on Solid Oxide Fuel Cells (SOFC-XVIII), Boston, MA, May 28-June 2, 2023
High temperature water electrolysis testing of gold-based electrodes for H 2 production
The Hybrid Sulfur (HyS) process is a promising thermochemical water-splitting cycle with global scale hydrogen production potential. The SO 2 -depolarized electrolyzer (SDE) is a critical component of the cycle. At the core of the SDE is the membrane-electrode assembly (MEA), which consists of a polymer electrolyte membrane (PEM) sandwiched between two electrocatalyst layers. New electrocatalyst and membrane materials are being developed with the goals of improving the electrolyzer performance and extending the lifetime of the MEA. In this work, we evaluated the performance of three different membranes and optimized operating conditions, resulting is one of the highest performances in the literature.
Accelerated Stress Test (AST) Development for Advanced Liquid Alkaline Water Electrolysis [Slides]
Outline. Alkaline Water Electrolyzers: Comparison of PEMEC and AWE systems and Components and degradation mechanisms in AWE; AST development: Electrolzyer AST development (AWE focus), PEMEC AST development, and AWE AST development.
High Efficiency PEM Water Electrolysis Enabled by Advanced Catalysts, Membranes and Processes
In this project, advanced membranes and catalysts were integrated into membrane electrode assembles (porous transport electrodes (PTE) or catalyst coated membranes (CCM)) leveraging precision coating methods to enable control of electrode structures and demonstration of the best component performance possible with these materials. Partner collaborations allowed for advanced characterization of the formed interfaces and degradation mechanisms. New methods of forming hydrogen recombination layers were also developed, to move away from wet chemistry processes that would have limited realization and implementation of the optimized electrode configurations in a commercial environment.
Intermediate Temperature Single Component Electrolysis Cell
This project aims at demonstrating a fundamentally new approach towards electrochemical hydrogen production using a single component cell design. Conventional electrolyzer cells consist of a stack of layers (oxygen and fuel electrodes, electrolyte layer) that require multiple processing steps and add to the fabrication cost and complexity. Here we explore the viability of a single-layer electrolyzer device based on the single-layer SOFC concepts described in literature (Asghar et al, 2020). The single layer material is a composite of ionic conductor and catalytic material consisting of ceria doped with Gd and Sm co-processed with CuFe 2 O 4 .
A Tandem Electrolysis Process for Multi-Carbon Chemical Production from Carbon Dioxide (Final Technical Report)
a two-step CO 2 electroreduction process for selective production of acetate and ethylene was successfully developed at the kW-scale. The CO 2 and CO electrolyzers were first investigated individually on the Watt-scale to achieve high current densities and more durable operation by using a reinforced GDL. High CO 2 conversion was obtained in the first CO 2 electrolyzer to produce a CO-dominant gas stream with minimal CO 2 , and highly pure acetate stream was produced in the second CO electrolyzer by using NiFe anode, which promoted alcohol oxidation to carboxylates. The two-step process operated stably for 200 h with acetate and ethylene as the major C 2+ products. Degradation mechanism study revealed that the flooding and the salt formation in the GDL is likely the biggest contributor to the performance degradation for both CO 2 and CO electrolyzers. A 1,000 cm 2 CO electrolyzer stack was then designed, fabricated, and operated up to a total current of 300 A along with a 500 cm 2 CO 2 electrolyzer stack which was operated up to a total current of 100 A. The CO electrolyzer stack demonstrated good stability at 300 A for at least 125 h at a carbon selectivity >96%. The impact of CO 2 , O 2 , N 2 , SO x , and NO x gas impurities on the CO electrolyzer stack was studied and a relatively high resistance to these contaminants was demonstrated. Electroreduction of CO 2 into acetic acid was also demonstrated to be environmentally favorable when compared to the traditional production of acetic acid when powered by renewable electricity. Additionally, electricity cost was identified as the primary source of cost sensitivity indicating substantial economic improvements could be achieved by continuing to drive down the cost of renewable electricity. Overall, the presented approach demonstrates the feasibility of the two-step electrochemical CO 2 reduction process for the effective production of C 2+ products at the kW-scale which should inspire future scaling efforts accelerating commercialization.
Pathway Study for Large-Scale Hydrogen Production from Solid Oxide Electrolysis Cell Technology
This poster was presented at the 2024 FECM/NETL Spring R&D Project Review Meeting. This data is a summary of a project involving large-scale hydrogen production via SOEC technology to identify a technology pathway to achieve the $1/kg hydrogen goal. The poster lays out the identified pathway and technology changes, assumptions, systems, cost results, and sensitivities along with discussion points.
Rational Design of Electrocatalysts for Maximizing CO2 Electrolysis Performance
This virtual invited talk in the session " Electrocatalysis and Energy”) at the International Conference on Catalysis Science and Chemical Engineering (CatScience 2024) will briefly overview diverse research areas of NETL to advance energy and environmental sustainability along with carbon management to achieve net zero emissions by 2050. Subsequently, the talk will primarily discuss how rational design of novel electrocatalysts would maximize the CO2 conversion in different cell configurations.
Rational Design of Electrocatalysts for Maximizing CO2 Electrolysis Performance
This presentation will briefly overview diverse research areas of NETL to advance energy and environmental sustainability along with carbon management to achieve net zero emissions by 2050. Subsequently, the talk will primarily discuss how rational design of novel electrocatalysts would maximize the CO2 conversion in different cell configurations.
Multi-Period Optimization of Multi-Timescale Energy Systems: Application to Solid-Oxide Electrolysis Cells
A presentation detailing the recent progress in the optimization of Solid-Oxide Cells under Chemical Degradation. The existing methods typically involve a quasi-steady state assumption to make this large-scale problem tractable. Here, we introduce an extension to this method that allows for adaptive coupling of degradation with the fast-timescale process based on a variety of error thresholds. This reduces the error accumulated during long-term optimization of the SOC under degradation and allows for decision making at multiple timescales. The results presented include long-term operating profiles of the SOC under degradation with both steady-state and fluctuating day to day operation.
Optimal Operation of Solid-Oxide Electrolysis Cell Systems Considering Synergistic Chemical and Physical Degradation
This poster summarizes work on synergistic degradation of Solid-Oxide Cells under physical and chemical degradation. We present operational insights that extend the useful life of SOCs while maintaining high efficiencies and economic viability. We also provide insights on how often the SOC must be replaced to ensure the reliability of the process. All these decisions are made through a dynamic optimization framework that utilizes new models for degradation that were developed as a part of the IDAES project.