Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crystal Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Preferred crystallographic orientation of cellulose in plant primary cell walls

Abstract Cellulose, the most abundant biopolymer on earth, is a versatile, energy rich material found in the cell walls of plants, bacteria, algae, and tunicates. It is well established that cellulose is crystalline, although the orientational order of cellulose crystallites normal to the plane of the cell wall has not been characterized. A preferred orientational alignment of cellulose crystals could be an important determinant of the mechanical properties of the cell wall and of cellulose-cellulose and cellulose-matrix interactions. Here, the crystalline structures of cellulose in primary cell walls of onion ( Allium cepa ), the model eudicot Arabidopsis ( Arabidopsis thaliana ), and moss ( Physcomitrella patens ) were examined through grazing incidence wide angle X-ray scattering (GIWAXS). We find that GIWAXS can decouple diffraction from cellulose and epicuticular wax crystals in cell walls. Pole figures constructed from a combination of GIWAXS and X-ray rocking scans reveal that cellulose crystals have a preferred crystallographic orientation with the (200) and (110)/( $$1\bar 10$$ 1 1 ¯ 0 ) planes preferentially stacked parallel to the cell wall. This orientational ordering of cellulose crystals, termed texturing in materials science, represents a previously unreported measure of cellulose organization and contradicts the predominant hypothesis of twisting of microfibrils in plant primary cell walls.

36 MATERIALS SCIENCE↗

Hyperbolic exciton polaritons in a van der Waals magnet

Abstract Exciton polaritons are quasiparticles of photons coupled strongly to bound electron-hole pairs, manifesting as an anti-crossing light dispersion near an exciton resonance. Highly anisotropic semiconductors with opposite-signed permittivities along different crystal axes are predicted to host exotic modes inside the anti-crossing called hyperbolic exciton polaritons (HEPs), which confine light subdiffractionally with enhanced density of states. Here, we show observational evidence of steady-state HEPs in the van der Waals magnet chromium sulfide bromide (CrSBr) using a cryogenic near-infrared near-field microscope. At low temperatures, in the magnetically-ordered state, anisotropic exciton resonances sharpen, driving the permittivity negative along one crystal axis and enabling HEP propagation. We characterize HEP momentum and losses in CrSBr, also demonstrating coupling to excitonic sidebands and enhancement by magnetic order: which boosts exciton spectral weight via wavefunction delocalization. Our findings open new pathways to nanoscale manipulation of excitons and light, including routes to magnetic, nonlocal, and quantum polaritonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of monomeric Sn(ii) and Sn(iv) perfluoropinacolate complexes and their characterization by 119 Sn Mössbauer and 119 Sn NMR spectroscopies

The synthesis and characterization of a series of Sn(II) and Sn(IV) complexes supported by the highly electron-withdrawing dianionic perfluoropinacolate (pinF) ligand are reported herein. Three analogs of [Sn IV (pin F ) 3 ] 2- with NEt 3 H + (1), K + (2), and {K(18C6)} + (3) counter cations and two analogs of [SnII(pinF)2]2- with K+ (4) and {K(15C5) 2 } + (5) counter cations were prepared and characterized by standard analytical methods, single-crystal X-ray diffraction, and 119 Sn Mössbauer and NMR spectroscopies. The six-coordinate SnIV(pinF) complexes display 119 Sn NMR resonances and 119 Sn Mössbauer spectra similar to SnO 2 (cassiterite). In contrast, the four-coordinate SnII(pinF) complexes, featuring a stereochemically-active lone pair, possess low 119 Sn NMR chemical shifts and relatively high quadrupolar splitting. Furthermore, the Sn(II) complexes are unreactive towards both Lewis bases (pyridine, NEt 3 ) and acids (BX 3 , Et 3 NH + ). Calculations confirm that the Sn(II) lone pair is localized within the 5s orbital and reveal that the Sn 5p x LUMO is energetically inaccessible, which effectively abates reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Actinide complexes with Wells–Dawson polyoxometalates (part 2): californium

We report the first example of a polyoxometalate (POM) compound containing californium. Using a Wells–Dawson POM ligand, K 17 Cf(P 2 W 17 O 61 ) 2 ·2H 2 O was synthesized and characterized. Californium is the heaviest element ever crystalized with a POM. Significant solubility differences among the POM's f-element complexes were observed, enabling selective precipitation with separation factors rivaling liquid–liquid extraction.

and nuclear chemistry↗

Tuning the room temperature ferromagnetism in Fe 5 GeTe 2 by arsenic substitution

In order to tune the magnetic properties of the cleavable high-Curie temperature ferromagnet Fe$_{5-x}$GeTe 2 , the effect of increasing the electron count through arsenic substitution has been investigated. Small additions of arsenic (2.5% and 5%) seemingly enhance ferromagnetic order in polycrystalline samples by quenching fluctuations on one of the three magnetic sublattices, whereas larger As concentrations decrease the ferromagnetic Curie temperature (T C ) and saturation magnetization. Furthermore, this work also describes the growth and characterization of Fe 4.8 AsTe 2 single crystals that are structurally analogous to Fe$_{5-x}$GeTe 2 but with some phase stability complications. Magnetization measurements reveal dominant antiferromagnetic behavior in Fe 4.8 AsTe 2 with a Néel temperature of $T_{\textrm{N}} \approx$ 42 K. A field-induced spin-flop below T N results in a switch from negative to positive magnetoresistance, with significant hysteresis causing butterfly-shaped resistance loops. In addition to reporting the properties of Fe 4.8 AsTe 2 , this work shows the importance of manipulating the individual magnetic sublattices in Fe$_{5-x}$GeTe 2 and motivates further efforts to control the magnetic properties in related materials by fine tuning of the Fermi energy or crystal chemistry.

36 MATERIALS SCIENCE↗

Suppressed incommensurate order in swedenborgite Ca 0.5 Y 0.5 BaCo 4 O 7

Swedenborgite Ca 0.5 Y 0.5 BaCo 4 O 7 (CYBCO) with geometrically frustrated kagome and triangular lattices exhibits a disordered ground state in spite of strong antiferromagnetic couplings between the Co spins. The character of the disordered state has been debated due to ambiguous Co states in the triangular layers. Here, we perform single-crystal diffuse neutron scattering experiments to fully characterize the short-range spin correlations in CYBCO. Through reverse Monte Carlo and self-consistent Gaussian approximation analyses, we confirm that the Co ions in both the kagome and triangular layers are magnetic, and the interlayer couplings, together with the lattice distortion, promote an incommensurate magnetic order that is suppressed possibly by exchange disorder. Our work clarifies the short-range spin correlations in CYBCO and establishes a general correspondence between unequal interactions and incommensurate spin correlations on the swedenborgite lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial stabilization of thin films of the frustrated Ge-based spinels

Frustrated magnets can host numerous exotic many-body quantum and topological phenomena. GeNi 2 O 4 is a three-dimensional S=1 frustrated magnet with an unusual two-stage transition to the two-dimensional antiferromagnetic ground state, while GeCu 2 O 4 is a high-pressure phase with a strongly tetragonally elongated spinel structure and magnetic lattice formed by S=1/2 CuO 2 linear chains with frustrated interchain exchange interactions and exotic magnetic behavior. Here, we report on the thin-film epitaxial stabilization of these two compounds. The developed growth mode, surface morphology, crystal structure, and copper valence state were characterized by in situ reflection high-energy electron diffraction, atomic force microscopy, x-ray reflectivity, x-ray diffraction, x-ray photoelectron spectroscopy, and resonant x-ray absorption spectroscopy. Our results pave an alternative route to the comprehensive investigation of the puzzling magnetic properties of these compounds and the exploration of emergent features driven by strain.

36 MATERIALS SCIENCE↗

Close Proximity to a Quantum Phase Transition in TmZn2⁢GaO5

TmZn2⁢GaO5 is a newly synthesized triangular lattice magnet that exhibits a unique quantum phase characterized by strong Ising anisotropy, a pseudodoublet crystal electric field ground state, and a low-energy gapped excitation at the 𝐾 point. Unlike its well-known counterparts, TmMgGa⁢O4 and YbMgGa⁢O4, this material crystallizes in a distinct hexagonal structure, leading to a platform for investigating frustrated magnetism. Magnetic susceptibility, heat capacity, and inelastic neutron scattering measurements confirm the absence of long-range magnetic order down to 50 mK, placing TmZn2⁢GaO5 in a distinct region of the transverse-field Ising model phase diagram. Theoretical calculations based on spin-wave theory and mean-field modeling reproduce key experimental observations, reinforcing the material’s placement in a quantum disordered or multipolar state near a quantum critical point that separates it from the low-energy phase of TmMgGa⁢O4. These results highlight its potential for exploring quantum disordered states, anisotropic excitations, and exotic quantum phases in frustrated spin systems.

Ennis, Matthew [Department of Physics, Duke Univer↗

XY-like incommensurate magnetic order in Ce 2 ⁢SnS 5

We report the synthesis of single crystals of Ce 2 ⁢SnS 5 through a two-stage chemical vapor transport method. The Ce 2 ⁢SnS 5 system is a member of the orthorhombic Pbam (No. 55) space group and realizes a distorted trigonal tricapped prism (TTP) crystal field around each cerium site. We characterized the sample through orientation-dependent magnetization and heat capacity measurements to probe the magnetic anisotropy in the system characteristic of XY-like anisotropic Heisenberg model behavior. Ce 2 ⁢SnS 5 furthermore enters a zero-field ordered phase under 𝑇 𝑁 =2.4 K; powder neutron diffraction measurements reveal incommensurate magnetic order near 𝑇 𝑁 . Furthermore, the system then locks into a commensurate, two-𝑞 magnetic structure below approximately 1.2 K. This commensurate structure belongs to the Shubnikov group 𝑃⁢𝑏′⁢𝑎′⁢𝑚′ ⁡(MSG 55.359) and realizes the propagation vectors $\overrightarrow{𝑞}$ = (1/3, 0, 0) and $\overrightarrow{𝑞}$ = (0, 0, 0).

Antiferromagnetism↗

Analyzer-free linear dichroic ptychography

Linear dichroism is an important tool to characterize the transmission matrix and determine the crystal or orbital orientation in a material. To achieve high-resolution mapping of transmission properties, we introduce the linear-dichroism scattering model in ptychographic imaging and develop an efficient two-stage reconstruction algorithm. Using the proposed algorithm on a uniaxial material, the dichroic transmission matrix can be recovered without an analyzer by using ptychography measurements with as few as three different polarization angles, with the help of an empty region to remove phase ambiguities.

97 MATHEMATICS AND COMPUTING↗

Microstructural and Superconducting Radiofrequency Properties of Multilayer Sequentially Sputtered Nb 3 Sn films

Nb 3 Sn is considered as a potential candidate for superconducting radiofrequency cavities for particle acceleration due to its higher transition temperature of 18.3 K and higher superheating field of 400 mT. Nb 3 Sn films can be grown inside the surface of a Nb cavity by sequentially sputtering multiple layers of Nb and Sn thin films followed by annealing at 950 °C for 3 h. We report on the properties of Nb 3 Sn films grown on Nb substrates by magnetron sputtering. The films’ crystal structure, surface morphology, and composition were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The films had a polycrystalline Nb 3 Sn structure with a fine-grain surface and an atomic Sn composition of ~23%. The RF surface resistance of the films was measured for different temperatures at 7.4 GHz to understand the feasibility of this method for the SRF application. The RF surface resistance of the films was 5 mΩ at 12 K, which is about 2 orders of magnitude higher than 60 μΩ previously measured in Nb 3 Sn films grown by Sn vapor diffusion. Finally, the sputtered film had a superconducting transition at 17.2 K, which is also lower than 17.9 K observed in Nb 3 Sn film prepared by vapor diffusion.

43 PARTICLE ACCELERATORS↗

Structural and spectral dynamics of single-crystalline Ruddlesden-Popper phase halide perovskite blue light-emitting diodes

Achieving perovskite-based high–color purity blue-emitting light-emitting diodes (LEDs) is still challenging. Here, we report successful synthesis of a series of blue-emissive two-dimensional Ruddlesden-Popper phase single crystals and their high–color purity blue-emitting LED demonstrations. Although this approach successfully achieves a series of bandgap emissions based on the different layer thicknesses, it still suffers from a conventional temperature-induced device degradation mechanism during high-voltage operations. To understand the underlying mechanism, we further elucidate temperature-induced device degradation by investigating the crystal structural and spectral evolution dynamics via in situ temperature-dependent single-crystal x-ray diffraction, photoluminescence (PL) characterization, and density functional theory calculation. The PL peak becomes asymmetrically broadened with a marked intensity decay, as temperature increases owing to [PbBr 6 ] 4- octahedra tilting and the organic chain disordering, which results in bandgap decrease. This study indicates that careful heat management under LED operation is a key factor to maintain the sharp and intense emission.

36 MATERIALS SCIENCE↗

Structure of the Core Postfusion Porcine Endogenous Retrovirus Fusion Protein

Retroviral elements from endogenous retroviruses have functions in mammalian physiology. The best-known examples are the envelope proteins that function in placenta development and immune suppression. Porcine endogenous retroviruses (PERVs) are an understudied class of endogenous retroviruses that infect cultured human cells, raising concern regarding porcine xenografts. The PERV envelope glycoprotein has also been proposed as a possible swine syncytin with a role in placental development. Despite the growing interest in PERVs, their envelope glycoproteins remain poorly characterized. Here, we successfully determined the postfusion crystal structure of the PERV core fusion ectodomain. The PERV fusion protein structure reveals a conserved class I viral fusion protein six-helix bundle. Biophysical experiments demonstrated that the thermodynamic stability of the PERV fusion protein secondary structure was the same at physiological and acidic pHs. A conserved surface analysis highlights the high degree of sequence conservation among retroviral fusogens in the chain reversal region that facilitates the large-scale conformational change required for membrane fusion. Further structural alignment of class I viral fusogens revealed a phylogenetic clustering that shows evolution into various lineages that correlate with virus mechanisms of cell entry. Our work indicates that structural dendrograms can be used to qualitatively infer insights into the fusion mechanisms of newly discovered class I viral fusogen structures.

59 BASIC BIOLOGICAL SCIENCES↗

Bacteriochlorin syntheses - Status, problems, and exploration

Bacteriochlorins – Nature’s near-infrared (NIR) chromophores – are distinguished by an intense ([Formula: see text] ∼;10 5 M[Formula: see text]cm[Formula: see text] long-wavelength absorption band in the ∼;700–1000 nm. The development of routes to prepare synthetic, tailorable bacteriochlorins holds promise for multiple disciplines where NIR-light-promoted photoactivity is of interest. A de novo route to bacteriochlorins equipped with a stabilizing gem-dimethyl group in each pyrroline ring was discovered in 2003. Continued development in this arena over 20 years has led to additional routes as well as methods to install substituents at selected positions about the perimeter of the macrocycle. The present paper reports studies that highlight substantial limitations of existing synthetic routes, including stymied access to multi-bacteriochlorin arrays and the inability to install (in a rational way) distinct groups at opposite sides of the macrocycle. The origins of the limitations are traced to particular stages of the chemistry ranging from derivatizing pyrroles, creating pyrrolines, constructing and elaborating dihydrodipyrrins, coupling dihydrodipyrrins, and forming macrocycles. Through exploration of a dozen aspects of bacteriochlorin syntheses, 60 new compounds (and nine known compounds via improved syntheses) have been prepared and characterized; the data include 20 single-crystal X-ray diffraction analyses. The research taken together points to areas of focus to fulfill the promise of this fascinating class of compounds.

Chemistry↗

Crystallization Mechanisms of Poly(vinylidene Fluoride- co -chlorotrifluoroethylene): Nucleation Transitions, Growth Kinetics, and Microstructure Evolution

The crystallization kinetics of FK-800, a commercial semicrystalline copolymer of chlorotrifluoroethylene and vinylidene fluoride (poly(CTFE-co-VDF)), dictate its microstructure and functional performance. Crystallization occurs between the glass transition (T g ≈ 31 °C) and melting point (T m ≈ 110 °C), with grain boundaries playing a key role in applications such as memristors, where they regulate filament growth. This study integrates in situ atomic force microscopy (AFM), grazing-incidence wide-angle X-ray scattering (GIWAXS), and differential scanning calorimetry (DSC) to characterize nucleation, growth, and morphology across the full crystallization window. Hot-stage AFM reveals a transition from homogeneous to heterogeneous nucleation near 45 °C and a shift from reaction-limited to diffusion-limited growth above 60 °C. Kinetics are analyzed using Lauritzen–Hoffman, Turnbull–Fisher, and Avrami models to extract surface free energies and activation barriers. A multiscale modeling framework is developed in which nucleation densities and growth rates measured by AFM are used to reconstruct Avrami kinetics, which are then validated against coverage data, and extrapolated to predict bulk crystallization behavior observed by DSC. GIWAXS confirms a primarily flat-on chain orientation at all temperatures, linking orientation to domain morphology. This integrative approach quantitatively connects nanoscale crystallization dynamics with macroscopic phase evolution, establishing a quantitative framework for modeling crystallization across time, temperature, and length scales.

Crystallization↗

Determining the complex second-order optical susceptibility in macroscale van der Waals heterobilayers

In this work, we report on the experimental characterization of the second-order susceptibility in MoSe 2 /WS 2 heterobilayers, including their hidden complex phases. To this end, we developed a heterodyne-detection scheme for second-harmonic generation and applied it to macroscale heterobilayer samples prepared using the gold-tape exfoliation method. The heterodyne scheme enabled us to distinguish the relative orientation of the crystal domains, and furthermore, it allowed us to characterize the complex phases of the susceptibility relative to a reference quartz sample. By comparing the results from the monolayer regions and the heterobilayer region over several hundred microns of the sample area, we determined that the contribution of interlayer effects to second-harmonic generation is within the experimental uncertainty arising from the sample inhomogeneity. The results here provide fundamental quantitative information necessary for the precise design of nanophotonic systems based on stacking engineering.

2D materials↗

Two Polymorphs of BaZn 2 P 2 : Crystal Structures, Phase Transition, and Transport Properties

Here, the novel α-BaZn 2 P 2 structural polymorph has been synthesized and structurally characterized for the first time. Its structure, elu-cidated from single crystal X-ray diffraction, indicates that the compound crystallizes in the orthorhombic α-BaCu 2 S 2 structure type, with unit cell parameters a = 9.7567(14) Å, b = 4.1266(6) Å, and c = 10.6000(15) Å. With β-BaZn 2 P 2 being previously iden-tified as belonging to the ThCr 2 Si 2 family, and with the precedent of structural phase transitions between the α-BaCu 2 S 2 type and the ThCr 2 Si 2 type, the potential for the pattern to be extended to the two different structural forms of BaZn 2 P 2 was explored. Thermal analysis suggest that a first order phase transition occurs at ~1123 K, whereby the low-temperature orthorhombic α-phase transforms to a high-temperature tetragonal β-BaZn 2 P 2 ; the structure of which was also studied and confirmed by single-crystal X-ray diffraction. Preliminary transport properties and band structure calculations indicate that α-BaZn 2 P 2 is a p-type, narrow-gap semiconductor with a direct bandgap (Eg) of 0.5 eV. The Seebeck coefficient, S(T), for the material increases steadily from the room temperature value of 119 µV/K to 184 µV/K at 600 K. The electrical resistivity of α-BaZn 2 P 2 is relatively high, on the order of 40 mΩ·cm, and the ρ(T) dependence shows gradual decrease upon heating. Such behavior is comparable to those of the typical semimetals or degenerate semiconductors. Although the observed values of the as-synthesized samples are not optimal, the carrier concentration can apparently be tuned to fall between the values of metals and semiconductors, thus providing an open window for optimizing this phase towards achieving an enhanced thermoelectric figure of merit zT. The calculated indirect band gap for the β-BaZn 2 P 2 phase is Eg = 0.03 eV which is about an order of magnitude lower than that of α-BaZn 2 P 2 . It is expected that the cage-like structural motif and layered structure possessed by α-BaZn 2 P 2 and β-BaZn 2 P 2 phases, respectively, would promote the realiza-tion of a low thermal conductivity in both compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Proton Insertion in Layered H 2 W 2 O 7 via Selective Etching of an Aurivillius Phase

H 2 W 2 O 7 , a metastable material synthesized via selective etching of the Aurivillius-related Bi 2 W 2 O 9 , is shown as an electrode for high power proton-based energy storage. Comprehensive structural characterization is performed to obtain a high-fidelity crystal structure of H 2 W 2 O 7 using an iterative approach that combines X-ray diffraction, neutron pair distribution function, scanning transmission electron microscopy, Raman spectroscopy, and density functional theory modeling. Electrochemical characterization shows a capacity retention of ≈80% at 1000 mV s –1 (1.5-s charge/discharge time) as compared to 1 mV s –1 (≈16-min charge/discharge time) with cyclability for over 100 000 cycles. Energetics from density functional theory calculations indicate that proton storage occurs at the terminal oxygen sites within the hydrated interlayer. Last, optical micrographs collected during in situ Raman spectroscopy show reversible, multicolor electrochromism, with color changes from pale yellow to blue, purple, and last, orange as a function of proton content. These results highlight the use of selective etching of layered perovskites for the synthesis of metastable transition metal oxide materials and the use of H 2 W 2 O 7 as an anode material for proton-based energy storage or electrochromic applications.

25 ENERGY STORAGE↗